Shop Online

www.sapiensman.com



  HOME : Sapiensman Shop Online -

  Buy (Products from over 160 countries). Sell (Sell a single item or create your own store) . Bid ( Penny auctions). Play ( Online games).

 

 

Advance Auto Parts: Car, Engine, Batteries, Brakes, Replacement, Performance & Accessories. Great Deals at AdvanceAutoParts.com! : auto parts, car parts, automotive accessories, autoparts, advance auto parts, advanced auto parts, auto accessory, auto accessories, car accessories parts america, replacement auto parts, automotive accessories, truck accessories, advanceautoparts.com, parts america, auto repair, automotive repair, car maintenance, car care tips, automotive maintenance, preventative maintenance, truck parts, batteries, oil filter, SUV, SUV Parts, SUVs, truck, brakes, shocks, struts, oil, automotive tools, spark plugs, tune up, tools, carparts, cars, ignition, mufflers, auto wash, auto cleaners, car care, windshield wipers and more ...

<< Previous Catalog - Home - Next Catalog >>

 



#51 << Previous - Page #1 - Next >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 -
Coated Rotor

Product : Coated Rotor
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines (International Organization for Standardization)OE based design for OE form, fit, and functionG3000 standard material specifications
**** PRICE: US$ 52.19
Manufacturer : Carquest Wearever
SKU: 11290055-P
Tags:

Start of page
Coated Rotor

Product : Coated Rotor
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines (International Organization for Standardization)OE based design for OE form, fit, and functionG3000 standard material specifications
**** PRICE: US$ 86.39
Manufacturer : Carquest Wearever
SKU: 11290065-P
Tags:

Start of page
Coated Rotor

Product : Coated Rotor
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines (International Organization for Standardization)OE based design for OE form, fit, and functionG3000 standard material specifications
**** PRICE: US$ 59.09
Manufacturer : Carquest Wearever
SKU: 11290075-P
Tags:

Start of page
Coated Rotor

Product : Coated Rotor
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines (International Organization for Standardization)OE based design for OE form, fit, and functionG3000 standard material specifications
**** PRICE: US$ 69.19
Manufacturer : Carquest Wearever
SKU: 11290085-P
Tags:

Start of page
Brake Cable

Product : Brake Cable
Category : Brakes, Steering & Suspension|Brakes|Parking Brake Parts
Catalog : AAP Full Catalog
Description : Brake Cable
**** PRICE: US$ 32.99
Manufacturer : Carquest Wearever
SKU: 11339389-P
Tags:

Start of page
Brake Cable

Product : Brake Cable
Category : Brakes, Steering & Suspension|Brakes|Parking Brake Parts
Catalog : AAP Full Catalog
Description : Brake Cable
**** PRICE: US$ 37.99
Manufacturer : Carquest Wearever
SKU: 11339404-P
Tags:

Start of page
Brake Cable

Product : Brake Cable
Category : Brakes, Steering & Suspension|Brakes|Parking Brake Parts
Catalog : AAP Full Catalog
Description : Brake Cable
**** PRICE: US$ 28.99
Manufacturer : Carquest Wearever
SKU: 11339429-P
Tags:

Start of page
Brake Cable

Product : Brake Cable
Category : Brakes, Steering & Suspension|Brakes|Parking Brake Parts
Catalog : AAP Full Catalog
Description : Brake Cable
**** PRICE: US$ 23.99
Manufacturer : Carquest Wearever
SKU: 11339442-P
Tags:

Start of page
Brake Hose

Product : Brake Hose
Category : Brakes, Steering & Suspension|Brakes|Brake Hoses & Lines
Catalog : AAP Full Catalog
Description : Brake Hose
**** PRICE: US$ 30.99
Manufacturer : Carquest Wearever
SKU: 11339518-P
Tags:

Start of page
Wheel Cylinder

Product : Wheel Cylinder
Category : Brakes, Steering & Suspension|Brakes|Brake Wheel Cylinders & Kits
Catalog : AAP Full Catalog
Description : Wheel Cylinder
**** PRICE: US$ 106.99
Manufacturer : Carquest Wearever
SKU: 11339530-P
Tags:

Start of page
AIR HAMMER W/CHISELS

Product : AIR HAMMER W/CHISELS
Category : Tools, Fluids & Garage|Tools and Shop Equipment|Torque & Impact Wrenches
Catalog : AAP Full Catalog
Description : AIR HAMMER W/CHISELS
**** PRICE: US$ 49.99
Manufacturer : Dewalt Tools
SKU: 11357516-P
Tags:

Start of page
Leaf Spring Bushing

Product : Leaf Spring Bushing
Category : Brakes, Steering & Suspension|Suspension|Leaf Spring Hardware
Catalog : AAP Full Catalog
Description : Leaf Spring Bushing
**** PRICE: US$ 166.99
Manufacturer : MOOG
SKU: 11385109-P
Tags:

Start of page
SWAY BAR BUSHING

Product : SWAY BAR BUSHING
Category : Brakes, Steering & Suspension|Suspension|Sway Bar Parts & Kits
Catalog : AAP Full Catalog
Description : SWAY BAR BUSHING
**** PRICE: US$ 13.99
Manufacturer : MOOG
SKU: 11385120-P
Tags:

Start of page
SWAY BAR BUSHING

Product : SWAY BAR BUSHING
Category : Brakes, Steering & Suspension|Suspension|Sway Bar Parts & Kits
Catalog : AAP Full Catalog
Description : SWAY BAR BUSHING
**** PRICE: US$ 16.49
Manufacturer : MOOG
SKU: 11385131-P
Tags:

Start of page
Leaf Spring Bushing

Product : Leaf Spring Bushing
Category : Brakes, Steering & Suspension|Suspension|Shocks & Struts Hardware
Catalog : AAP Full Catalog
Description : Leaf Spring Bushing
**** PRICE: US$ 17.59
Manufacturer : MOOG
SKU: 11385143-P
Tags:

Start of page
Leaf Spring Bushing

Product : Leaf Spring Bushing
Category : Brakes, Steering & Suspension|Suspension|Shocks & Struts Hardware
Catalog : AAP Full Catalog
Description : Leaf Spring Bushing
**** PRICE: US$ 6.59
Manufacturer : MOOG
SKU: 11385153-P
Tags:

Start of page
SWAY BAR BUSHING

Product : SWAY BAR BUSHING
Category : Brakes, Steering & Suspension|Suspension|Sway Bar Parts & Kits
Catalog : AAP Full Catalog
Description : SWAY BAR BUSHING
**** PRICE: US$ 9.49
Manufacturer : MOOG
SKU: 11385225-P
Tags:

Start of page
Platinum Spark Plug

Product : Platinum Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : Autolite Platinum Spark Plugs provide a center wire platinum firing tip for improved performance. Product Features:Super conductive Yttrium enhanced ground electrode provides superior heat transferFull platinum tip assures virtually no gap erosion for longer plug lifeLeak proof, heat fused resistor for durability4 year limited warranty
**** PRICE: US$ 3.29
Manufacturer : Autolite
SKU: 11390014-P
Tags:

Start of page
Hi-Performance Racing Spark Plug

Product : Hi-Performance Racing Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : Actual racing spark plug used by many professional race car drivers. Provides a new Yttrium enhanced alloy allowing up to 8% reduction in sidewire temperature*, anti-corrosive nickel plating and cut back ground electrode for improved ignitability.
**** PRICE: US$ 4.09
Manufacturer : Autolite
SKU: 15650011-P
Tags:

Start of page
Hi-Performance Racing Spark Plug

Product : Hi-Performance Racing Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : Actual racing spark plug used by many professional race car drivers. Provides a new Yttrium enhanced alloy allowing up to 8% reduction in sidewire temperature*, anti-corrosive nickel plating and cut back ground electrode for improved ignitability.
**** PRICE: US$ 4.09
Manufacturer : Autolite
SKU: 15650021-P
Tags:

Start of page
Iridium XP Spark Plug

Product : Iridium XP Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : The Iridium XP is Autolite's most technologically advanced plug ever. These spark plugs provide better durability* and a more focused ignition for better overall ignitability** and optimum performance. Product Features:Iridium enhanced 0.6mm finewire design for optimal durability and performancePlatinum ground wire for maximum efficiency in all ignition types including DIS systemsV-trimmed ground electrode for improved ignitabilityHeat range precisely set by Ionization Sensing TechnologyLifetime Limited Warranty
**** PRICE: US$ 6.99
Manufacturer : Autolite
SKU: 15650190-P
Tags:

Start of page
Iridium XP Spark Plug

Product : Iridium XP Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : The Iridium XP is Autolite's most technologically advanced plug ever. These spark plugs provide better durability* and a more focused ignition for better overall ignitability** and optimum performance. Product Features:Iridium enhanced 0.6mm finewire design for optimal durability and performancePlatinum ground wire for maximum efficiency in all ignition types including DIS systemsV-trimmed ground electrode for improved ignitabilityHeat range precisely set by Ionization Sensing TechnologyLifetime Limited Warranty
**** PRICE: US$ 6.99
Manufacturer : Autolite
SKU: 15650201-P
Tags:

Start of page
Xtreme Sport Spark Plug

Product : Xtreme Sport Spark Plug
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : Autolite Xtreme Sport small engine spark plugs are engineered to provide better overall ignitability for optimum performance, reduced fouling and longer life* for all your Xtreme Sport needs. Product Features:0.6mm finewire design with Sport V-trim ground electrode for more horsepower than standard plugUp to 26% quicker engine starts than a standard non-finewire spark plugFocused ignition prevents fouling better than leading standard plug for reliable starting in any season or weatherMeets or exceeds OE specifications
**** PRICE: US$ 6.09
Manufacturer : Autolite
SKU: 15650430-P
Tags:

Start of page
Brake Rotor - Front

Product : Brake Rotor - Front
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines. (International Organization for Standardization)OE vane configuration to dissipate heat, increasing pad life.Proper harmonic design helps to reduce brake noise. Non-directional finish for less break-in time and reduced brake noise.Ready for immediate "out-of-the-box" installation (after cleaning) Advance Auto Parts Rotor Tips: Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.Always replace rotors in pairs to improve stopping power.
**** PRICE: US$ 82.99
Manufacturer : Carquest Wearever
SKU: 15670215-P
Tags:

Start of page
Electric Fuel Pump

Product : Electric Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 99.99
Manufacturer : CARQUEST
SKU: 15770125-P
Tags:

Start of page
Brake Rotor

Product : Brake Rotor
Category : Brakes, Steering & Suspension|Brakes|Brake Rotors
Catalog : AAP Full Catalog
Description : CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. Product Features:Manufactured to exacting quality and dimensional specifications for Superior Stopping PowerExceeds ISO manufacturing guidelines. (International Organization for Standardization)OE vane configuration to dissipate heat, increasing pad life.Proper harmonic design helps to reduce brake noise. Non-directional finish for less break-in time and reduced brake noise.Ready for immediate "out-of-the-box" installation (after cleaning) Advance Auto Parts Rotor Tips: Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.Always replace rotors in pairs to improve stopping power.
**** PRICE: US$ 59.99
Manufacturer : Carquest Wearever
SKU: 15890058-P
Tags:

Start of page
Electric In-Tank Fuel Pump

Product : Electric In-Tank Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 35.99
Manufacturer : CARQUEST
SKU: 18770016-P
Tags:

Start of page
Electric Fuel Pump

Product : Electric Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 337.99
Manufacturer : CARQUEST
SKU: 18770088-P
Tags:

Start of page
Mechanical Fuel Pump

Product : Mechanical Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST mechanical fuel pumps are the only mechanical fuel pumps manufactured in the USA. These pumps are precision-cast units designed to meet or exceed OEM specifications and are built with enhanced, long-lasting components. Product Features:Special heat treated rocker arms and case-hardened pins to ensure long-lasting performanceUpgraded seals and pump diaphragms for compatibility with modern multi-fuel blendsEvery single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
**** PRICE: US$ 72.99
Manufacturer : CARQUEST
SKU: 18770131-P
Tags:

Start of page
Mechanical Fuel Pump

Product : Mechanical Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST mechanical fuel pumps are the only mechanical fuel pumps manufactured in the USA. These pumps are precision-cast units designed to meet or exceed OEM specifications and are built with enhanced, long-lasting components. Product Features:Special heat treated rocker arms and case-hardened pins to ensure long-lasting performanceUpgraded seals and pump diaphragms for compatibility with modern multi-fuel blendsEvery single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
**** PRICE: US$ 53.99
Manufacturer : CARQUEST
SKU: 18770183-P
Tags:

Start of page
Fuel Pump Sender Assembly

Product : Fuel Pump Sender Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. CARQUEST or Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 225.99
Manufacturer : CARQUEST
SKU: 18770252-P
Tags:

Start of page
Fuel Pump Hanger Assembly

Product : Fuel Pump Hanger Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pump Assemblies
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump hanger assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 192.99
Manufacturer : CARQUEST
SKU: 18770326-P
Tags:

Start of page
Fuel Pump Sender Assembly

Product : Fuel Pump Sender Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. CARQUEST or Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 391.99
Manufacturer : CARQUEST
SKU: 18770364-P
Tags:

Start of page
Electric In-Tank Fuel Pump

Product : Electric In-Tank Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 272.99
Manufacturer : CARQUEST
SKU: 18770476-P
Tags:

Start of page
Tank Seal

Product : Tank Seal
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pump Seals
Catalog : AAP Full Catalog
Description : CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life. Product Features:Precision stamped for perfect fit and pump positionAlways replace lock ring as a part of fuel pump service.
**** PRICE: US$ 6.99
Manufacturer : CARQUEST
SKU: 18770590-P
Tags:

Start of page
Fuel Pump Tank Seal

Product : Fuel Pump Tank Seal
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pump Seals
Catalog : AAP Full Catalog
Description : CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life. Product Features:Precision stamped for perfect fit and pump positionAlways replace lock ring as a part of fuel pump service.
**** PRICE: US$ 20.99
Manufacturer : CARQUEST
SKU: 18770600-P
Tags:

Start of page
Fuel Pump Module Assembly

Product : Fuel Pump Module Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceTriple barb hose fitting provides superior, long-lasting sealSuperior return porting for optimum fuel flowEnhanced pump to flange harness design provides worry-free electrical performanceCeramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every applicationGradient density, dual zone filtration designed for better contamination resistance
**** PRICE: US$ 186.99
Manufacturer : CARQUEST
SKU: 18770677-P
Tags:

Start of page
Air Conditioning Hose Assembly

Product : Air Conditioning Hose Assembly
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One hose assemblies meet or exceed original equipment specifications.
**** PRICE: US$ 169.99
Manufacturer : ToughOne
SKU: 18890068-P
Tags:

Start of page
Air Conditioning Hose Assembly

Product : Air Conditioning Hose Assembly
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One hose assemblies meet or exceed original equipment specifications.
**** PRICE: US$ 84.99
Manufacturer : ToughOne
SKU: 18890212-P
Tags:

Start of page
Air Conditioning Accumulator with Hose

Product : Air Conditioning Accumulator with Hose
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One Accumulators are designed to meet or exceed original equipment specifications.
**** PRICE: US$ 78.79
Manufacturer : ToughOne
SKU: 18890433-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 119.99
Manufacturer : ToughOne
SKU: 18891054-P
Tags:

Start of page
Expansion Valve/Orifice Tube

Product : Expansion Valve/Orifice Tube
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications.
**** PRICE: US$ 42.59
Manufacturer : ToughOne
SKU: 18891513-P
Tags:

Start of page
Expansion Valve/Orifice Tube

Product : Expansion Valve/Orifice Tube
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Block Type Flange Expansion Valve
**** PRICE: US$ 54.19
Manufacturer : ToughOne
SKU: 18891539-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 99.99
Manufacturer : ToughOne
SKU: 18891722-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 139.99
Manufacturer : ToughOne
SKU: 18891748-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 102.99
Manufacturer : ToughOne
SKU: 18891770-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 109.99
Manufacturer : ToughOne
SKU: 18891796-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 168.99
Manufacturer : ToughOne
SKU: 18891816-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 109.99
Manufacturer : ToughOne
SKU: 18891836-P
Tags:

Start of page
Accumulator/Receiver Drier

Product : Accumulator/Receiver Drier
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One Accumulators are designed to meet or exceed original equipment specifications.
**** PRICE: US$ 48.19
Manufacturer : ToughOne
SKU: 18892069-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 139.99
Manufacturer : ToughOne
SKU: 18892297-P
Tags:

Start of page
Air Conditioning Hose Assembly

Product : Air Conditioning Hose Assembly
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One hose assemblies meet or exceed original equipment specifications.
**** PRICE: US$ 36.99
Manufacturer : ToughOne
SKU: 18892398-P
Tags:

Start of page
Air Conditioning Compressor with Clutch - New

Product : Air Conditioning Compressor with Clutch - New
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications.
**** PRICE: US$ 247.99
Manufacturer : ToughOne
SKU: 18892800-P
Tags:

Start of page
Aluminum Filter Drier with Pad Mount

Product : Aluminum Filter Drier with Pad Mount
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One Accumulators are designed to meet or exceed original equipment specifications.
**** PRICE: US$ 36.49
Manufacturer : ToughOne
SKU: 18893268-P
Tags:

Start of page
Revolution HT Spark Plugs

Product : Revolution HT Spark Plugs
Category : Engines & Ignition|Engine Control and Ignition|Spark Plugs
Catalog : AAP Full Catalog
Description : A unique, patented design with high strength steel technology that results in more durability and greater power from a more compressive seal, improved heat transfer and more focused ignition power.
**** PRICE: US$ 12.19
Manufacturer : Autolite
SKU: 20650267-P
Tags:

Start of page
Fuel Pump Module Assembly

Product : Fuel Pump Module Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceTriple barb hose fitting provides superior, long-lasting sealSuperior return porting for optimum fuel flowEnhanced pump to flange harness design provides worry-free electrical performanceCeramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every applicationGradient density, dual zone filtration designed for better contamination resistance
**** PRICE: US$ 293.99
Manufacturer : CARQUEST
SKU: 20770030-P
Tags:

Start of page
Fuel Pump Tank Seal

Product : Fuel Pump Tank Seal
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pump Seals
Catalog : AAP Full Catalog
Description : CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life. Product Features:Precision stamped for perfect fit and pump positionAlways replace lock ring as a part of fuel pump service.
**** PRICE: US$ 4.99
Manufacturer : CARQUEST
SKU: 20771271-P
Tags:

Start of page
Fuel Pump Sender Assembly

Product : Fuel Pump Sender Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. CARQUEST or Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 353.99
Manufacturer : CARQUEST
SKU: 20771287-P
Tags:

Start of page
Fuel Pump Module Assembly

Product : Fuel Pump Module Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceTriple barb hose fitting provides superior, long-lasting sealSuperior return porting for optimum fuel flowEnhanced pump to flange harness design provides worry-free electrical performanceCeramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every applicationGradient density, dual zone filtration designed for better contamination resistance
**** PRICE: US$ 487.99
Manufacturer : CARQUEST
SKU: 20771323-P
Tags:

Start of page
Fuel Pump Module Assembly

Product : Fuel Pump Module Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceTriple barb hose fitting provides superior, long-lasting sealSuperior return porting for optimum fuel flowEnhanced pump to flange harness design provides worry-free electrical performanceCeramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every applicationGradient density, dual zone filtration designed for better contamination resistance
**** PRICE: US$ 439.99
Manufacturer : CARQUEST
SKU: 20771347-P
Tags:

Start of page
Fuel Pump Module Assembly

Product : Fuel Pump Module Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceTriple barb hose fitting provides superior, long-lasting sealSuperior return porting for optimum fuel flowEnhanced pump to flange harness design provides worry-free electrical performanceCeramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every applicationGradient density, dual zone filtration designed for better contamination resistance
**** PRICE: US$ 303.99
Manufacturer : CARQUEST
SKU: 20771392-P
Tags:

Start of page
Electric In-Tank Fuel Pump

Product : Electric In-Tank Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 181.99
Manufacturer : CARQUEST
SKU: 20771409-P
Tags:

Start of page
Fuel Pump Sender Assembly

Product : Fuel Pump Sender Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. CARQUEST or Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 499.99
Manufacturer : CARQUEST
SKU: 20771733-P
Tags:

Start of page
Fuel Pump Sender Assembly

Product : Fuel Pump Sender Assembly
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. CARQUEST or Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced rust-inhibiting finish for long-lasting durabilityHigh-performance pump section assembly provides superior performanceLeading-edge inlet design to reduce friction and increase performanceGradient density strainer designed for better contamination resistance
**** PRICE: US$ 301.99
Manufacturer : CARQUEST
SKU: 20771748-P
Tags:

Start of page
Electric Fuel Pump

Product : Electric Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 196.99
Manufacturer : CARQUEST
SKU: 20772628-P
Tags:

Start of page
Electric In-Tank Fuel Pump

Product : Electric In-Tank Fuel Pump
Category : Air, Fuel, Emission & Exhaust|Fuel Systems|Fuel Pumps
Catalog : AAP Full Catalog
Description : CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function. Product Features:Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performanceAdvanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.High-performance pump section assembly provides superior performanceLeading-edge inlet design to increase performance and efficiency, leading to longer lifeHigh grade outer shell for life-long corrosion resistanceOptimized, precision-wound armature assembly for increased performance
**** PRICE: US$ 300.99
Manufacturer : CARQUEST
SKU: 20772656-P
Tags:

Start of page
Air Conditioning Hose - Suction Line

Product : Air Conditioning Hose - Suction Line
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One hose assemblies meet or exceed original equipment specifications.
**** PRICE: US$ 89.99
Manufacturer : ToughOne
SKU: 20890471-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 132.99
Manufacturer : ToughOne
SKU: 20890530-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 118.99
Manufacturer : ToughOne
SKU: 20890813-P
Tags:

Start of page
Air Conditioning Hose Assembly

Product : Air Conditioning Hose Assembly
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One hose assemblies meet or exceed original equipment specifications.
**** PRICE: US$ 107.99
Manufacturer : ToughOne
SKU: 20891813-P
Tags:

Start of page
Air Conditioning Evaporator

Product : Air Conditioning Evaporator
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. Tough One evaporators meet or exceed original equipment specifications.
**** PRICE: US$ 118.99
Manufacturer : ToughOne
SKU: 20892246-P
Tags:

Start of page
Expansion Valve/Orifice Tube

Product : Expansion Valve/Orifice Tube
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. TXV O-Ring Expansion Valve
**** PRICE: US$ 40.09
Manufacturer : ToughOne
SKU: 20892389-P
Tags:

Start of page
Expansion Valve/Orifice Tube

Product : Expansion Valve/Orifice Tube
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. TXV O-Ring Expansion Valve
**** PRICE: US$ 23.69
Manufacturer : ToughOne
SKU: 20897012-P
Tags:

Start of page
Air Conditioning Expansion Valve

Product : Air Conditioning Expansion Valve
Category : Cooling & Heating|A/C Repair|AC Compressors
Catalog : AAP Full Catalog
Description : Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. TXV O-Ring Expansion Valve
**** PRICE: US$ 32.99
Manufacturer : ToughOne
SKU: 20898544-P
Tags:

Start of page
Strut Mount Assembly

Product : Strut Mount Assembly
Category : Brakes, Steering & Suspension|Suspension|Shock Absorber Mounts
Catalog : AAP Full Catalog
Description : MOOG Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians. Product Features:Engineered to meet or exceed OE requirements.Superior rubber to steel bonding for durability.High polish chrome steel bearing races.Replacement helps restore vehicle handling.
**** PRICE: US$ 58.99
Manufacturer : MOOG
SKU: 21880538-P
Tags:

Start of page
Stabilizer Bar Link Kit

Product : Stabilizer Bar Link Kit
Category : Brakes, Steering & Suspension|Suspension|Sway Bar Parts & Kits
Catalog : AAP Full Catalog
Description : MOOG Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs. Product Features:Improves upon OE designsQuiet, dependable operationNASCAR-proven performanceProvides like-new steering, ease of installation and longer lifeProblem Solver products incorporate proven design and engineering features
**** PRICE: US$ 27.99
Manufacturer : MOOG
SKU: 21880887-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,500 lbs. of gross trailer weight and 150 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Volkswagen Quantum Syncro wagon (including 4WD) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 219.99
Manufacturer : Curt
SKU: 22010297-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,500 lbs. of gross trailer weight and 150 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Nissan Stanza 4WD wagon (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 278.99
Manufacturer : Curt
SKU: 22010307-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Mazda 323 sedan (except 1988 GT) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 167.99
Manufacturer : Curt
SKU: 22010318-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Honda Civic sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 167.99
Manufacturer : Curt
SKU: 22010328-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Scion xB (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 179.99
Manufacturer : Curt
SKU: 22010340-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,500 lbs. of gross trailer weight and 150 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the BMW 7 Series sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 224.99
Manufacturer : Curt
SKU: 22010357-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Nissan 200SX coupe (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 176.99
Manufacturer : Curt
SKU: 22010368-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Volkswagen Passat sedan (except Syncro) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 289.99
Manufacturer : Curt
SKU: 22010385-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Toyota Corolla sedan or wagon (2WD) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 198.99
Manufacturer : Curt
SKU: 22010424-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Geo Metro hatchback or convertible or Suzuki Swift hatchback (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 149.99
Manufacturer : Curt
SKU: 22010435-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Kia Spectra (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 169.99
Manufacturer : Curt
SKU: 22010446-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,500 lbs. of gross trailer weight and 150 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Volkswagen Vanagon (except Syncro) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a 3/4" trailer ball shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 176.99
Manufacturer : Curt
SKU: 22010459-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,500 lbs. of gross trailer weight and 250 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Toyota Rav4 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 206.99
Manufacturer : Curt
SKU: 22010475-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Toyota Corolla sedan, Geo Prizm sedan or Chevrolet Prizm sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 145.99
Manufacturer : Curt
SKU: 22010490-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Plymouth Breeze, Chrysler Cirrus or Dodge Stratus sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 189.99
Manufacturer : Curt
SKU: 22010512-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Hyundai Azera sedan V6 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 172.99
Manufacturer : Curt
SKU: 22010533-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Hyundai Sonata sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 167.99
Manufacturer : Curt
SKU: 22010550-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Toyota Celica coupe or Toyota Echo (except Canadian models) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 189.99
Manufacturer : Curt
SKU: 22010561-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Suzuki Verona (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 150.99
Manufacturer : Curt
SKU: 22010580-P
Tags:

Start of page
Class 1 Fixed-Tongue Trailer Hitch

Product : Class 1 Fixed-Tongue Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Hyundai Sonata sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitFixed drawbar readily accepts a trailer ball with a 3/4" shankProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 208.99
Manufacturer : Curt
SKU: 22010598-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,500 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Honda Accord sedan or coupe (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 239.99
Manufacturer : Curt
SKU: 22010610-P
Tags:

Start of page
Class 1 Trailer Hitch with Ball Mount

Product : Class 1 Trailer Hitch with Ball Mount
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Mazda 929 sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with an old-style 1 1/4" x 1 1/4" ball mount to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaning1 1/4" x 1 1/4" ball mount features a 3/4" hole to accept a trailer ball shankOld-style ball mount can be flipped to provide drop or riseBacked by a limited lifetime warranty
**** PRICE: US$ 218.99
Manufacturer : Curt
SKU: 22010626-P
Tags:

Start of page
Class 3 Trailer Hitch

Product : Class 3 Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 5,000 lbs. and a comparable tongue weight capacity of 500 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Jeep Cherokee (including Sport) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a round tube frame and comes with all necessary hardware for a complete installation. The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 6,000 lbs. and the tongue weight capacity to 600 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component). CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitConstructed with a sleek, round-tube main bodyProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaningBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 174.99
Manufacturer : Curt
SKU: 22010642-P
Tags:

Start of page
Class 3 Trailer Hitch

Product : Class 3 Trailer Hitch
Category : Accessories, Body & Wipers|Accessories|Trailer Hitch & Accessories
Catalog : AAP Full Catalog
Description : The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 6,000 lbs. and a comparable tongue weight capacity of 600 lbs. It is designed to be a custom-fit trailer hitch for certain years of the GMC Sierra 2500HD or 3500 with a 6' bed or Chevrolet Silverado 2500HD or 3500 with a 6' bed (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with all necessary hardware for a complete installation. The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 10,000 lbs. and the tongue weight capacity to 1,000 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component). CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty. Product Features:Made with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid Bonderite coatingStrengthened with a forged, welded, seamless collarEquipped with an open-back receiver for easy cleaningBacked by a limited lifetime warrantyMade in USA
**** PRICE: US$ 209.99
Manufacturer : Curt
SKU: 22010653-P
Tags:

Start of page

 

 

 


www.sapiensman.com