Shop Online

www.sapiensman.com



  HOME : Sapiensman Shop Online -

  Buy (Products from over 160 countries). Sell (Sell a single item or create your own store) . Bid ( Penny auctions). Play ( Online games).

 

 

Advance Auto Parts: Car, Engine, Batteries, Brakes, Replacement, Performance & Accessories. Great Deals at AdvanceAutoParts.com! : auto parts, car parts, automotive accessories, autoparts, advance auto parts, advanced auto parts, auto accessory, auto accessories, car accessories parts america, replacement auto parts, automotive accessories, truck accessories, advanceautoparts.com, parts america, auto repair, automotive repair, car maintenance, car care tips, automotive maintenance, preventative maintenance, truck parts, batteries, oil filter, SUV, SUV Parts, SUVs, truck, brakes, shocks, struts, oil, automotive tools, spark plugs, tune up, tools, carparts, cars, ignition, mufflers, auto wash, auto cleaners, car care, windshield wipers and more ...

<< Previous Catalog - Home - Next Catalog >>

 



#51 << Previous - Page #1 - Next >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 -
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-485P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda RX-8 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the passenger side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish with a series of gradually expanding inlet pipes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hoses. The tapered cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-485P vehicle applications to determine the legal status for each vehicle. Product Features:Estimated Horsepower Gain: 8.4 HP @ 7300 RPMReplacement Filter: 21-2109DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 455.99
Manufacturer : AEM Induction
SKU: 22120446-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-549C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Maxima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and a replacement silicone crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-549C vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 320.99
Manufacturer : AEM Induction
SKU: 22120459-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-545R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Altima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and a replacement silicone engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-545R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 306.99
Manufacturer : AEM Induction
SKU: 22120473-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-568R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Scion tC models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and a replacement silicone crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-568R vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 314.99
Manufacturer : AEM Induction
SKU: 22120490-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-514P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda S2000 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including replacement breather and vacuum hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-514P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2110DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 410.99
Manufacturer : AEM Induction
SKU: 22120516-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-536P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Pontiac Solstice and Saturn Sky models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-536P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 274.99
Manufacturer : AEM Induction
SKU: 22120530-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-521R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Tiberon models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-521R vehicle applications to determine the legal status for each vehicle. Product Features:Estimated Horsepower Gain: 16.2 HP @ 6000 RPMReplacement Filter: 21-203DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 291.99
Manufacturer : AEM Induction
SKU: 22120542-P
Tags:

Start of page
Dual Chamber Intake System

Product : Dual Chamber Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 24-6004C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Acura Integra GSR models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6004C vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-205DKTuned dual chambered intake tubeDesigned to maximize horsepower and torqueImproved throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 361.99
Manufacturer : AEM Induction
SKU: 22120859-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-406B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Prelude models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-406B vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 284.99
Manufacturer : AEM Induction
SKU: 22120576-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-403C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-403C vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-201DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 262.99
Manufacturer : AEM Induction
SKU: 22120587-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : AEM Air Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These air intakes usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications. Product Features:Replacement Filter: 21-202DKEngineered to add horsepower and reduce restriction compared to OEM air intakesAll AEM Air Intakes come with a lifetime DRYFLOW Synthetic air filter with great filtrationGuaranteed for the life of your car or truckManufactured in the USA
**** PRICE: US$ 296.99
Manufacturer : AEM Induction
SKU: 22120638-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-462R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota MR2 Spyder models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum switching valves. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-462R vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 287.99
Manufacturer : AEM Induction
SKU: 22120651-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-450C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-450C vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-201DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 311.99
Manufacturer : AEM Induction
SKU: 22120664-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-425R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Neon SRT-4 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red and black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-425R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 308.99
Manufacturer : AEM Induction
SKU: 22120675-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-417P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and inlet air temperature sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-417P vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 288.99
Manufacturer : AEM Induction
SKU: 22120687-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-424C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Neon models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor as well as a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-424C vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 325.99
Manufacturer : AEM Induction
SKU: 22120704-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-419P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 309.99
Manufacturer : AEM Induction
SKU: 22120719-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : AEM Air Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These air intakes usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications. Product Features:Replacement Filter: 21-201D-HKEngineered to add horsepower and reduce restriction compared to OEM air intakesAll AEM Air Intakes come with a lifetime DRYFLOW Synthetic air filter with great filtrationGuaranteed for the life of your car or truckManufactured in the USA
**** PRICE: US$ 238.99
Manufacturer : AEM Induction
SKU: 22120732-P
Tags:

Start of page
Cold Air Intake System

Product : Cold Air Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-640P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda MX-5 and MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the inside of the front bumper on the driver's side which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-640P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 343.99
Manufacturer : AEM Induction
SKU: 22120745-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-482P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Mazda Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor, inlet air temperature sensor, ventilation hose and purge solenoid valve. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-482P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 279.99
Manufacturer : AEM Induction
SKU: 22120777-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-470R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Subaru Impreza models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-470R vehicle applications to determine the legal status for each vehicle. Product Features:Affordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 210.99
Manufacturer : AEM Induction
SKU: 22120787-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-511P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor, breather hoses and oil trap. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-511P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-201DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 232.99
Manufacturer : AEM Induction
SKU: 22120800-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-505B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura RSX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor and intake air bypass thermal valve vacuum hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-505B vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 196.99
Manufacturer : AEM Induction
SKU: 22120810-P
Tags:

Start of page
Dual Chamber Intake System

Product : Dual Chamber Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 24-6104C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda S2000 models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hose, Vacuum hose, and air control solenoid. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6104C vehicle applications to determine the legal status for each vehicle. Product Features:Tuned dual chambered intake tubeDesigned to maximize horsepower and torqueImproved throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 340.99
Manufacturer : AEM Induction
SKU: 22120846-P
Tags:

Start of page
Dual Chamber Intake System

Product : Dual Chamber Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 24-6008C Dual Chamber Air Intake System is engineered to maximize horsepower and torque gains for specific Honda Accord and Accord EX models by utilizing a patented dual chamber design. The restrictive factory air filter and air intake housing are replaced with this AEM dual chamber air intake system. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the PCV valve, vacuum line and fast idle thermo valve. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 24-6008C vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKTuned dual chambered intake tubeDesigned to maximize horsepower and torqueImproved throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 340.99
Manufacturer : AEM Induction
SKU: 22120857-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8209DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Dakota and Mitsubishi Raider models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8209DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-204DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 300.99
Manufacturer : AEM Induction
SKU: 22120924-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8200DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Durango and Dakota models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system includes a replacement AEM intake plenum and accommodates the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8200DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2059DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 334.99
Manufacturer : AEM Induction
SKU: 22120937-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8311DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Wrangler models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor where equipped and a replacement silicone breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8311DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2039DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 283.99
Manufacturer : AEM Induction
SKU: 22120948-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8304DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Wrangler models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8304DP vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2049DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 345.99
Manufacturer : AEM Induction
SKU: 22120958-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8001DP Brute Force Air Intake System produce horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger side fender well and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tube connects to an AEM intake plenum which replaces the stock air cleaner housing and directs air evenly into the engine throttle body. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8001DP vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2059DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 402.99
Manufacturer : AEM Induction
SKU: 22120969-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8009DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific GMC Sonoma and Chevrolet S10 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and engine cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8009DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2039DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 290.99
Manufacturer : AEM Induction
SKU: 22120979-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8109DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda B400 and Ford Ranger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8109DP vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-209EDKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 313.99
Manufacturer : AEM Induction
SKU: 22120996-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8110DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 Lightning and Harley Davidson models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, IAT sensor, idle air control hose and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8110DP vehicle applications to determine the legal status for each vehicle. Product Features:Increased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 331.99
Manufacturer : AEM Induction
SKU: 22121007-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-427R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Chrysler PT Cruiser models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is protected by a heat shield which is designed to protect the filter from hot engine air in order to preserve horsepower gains. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-427R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-203DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 258.99
Manufacturer : AEM Induction
SKU: 22121018-P
Tags:

Start of page
Brute Force Intake System

Product : Brute Force Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-8401DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota Tundra and Sequoia models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and engine breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8401DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2039DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 345.99
Manufacturer : AEM Induction
SKU: 22121028-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-416R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura CL and Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coating finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-416R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 173.99
Manufacturer : AEM Induction
SKU: 22121038-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-451P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Ford Focus SVT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-451P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 241.99
Manufacturer : AEM Induction
SKU: 22121050-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-441R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Nissan 240SX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hoses, mass air flow sensor and inlet air temperature sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-441R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 229.99
Manufacturer : AEM Induction
SKU: 22121060-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-400R Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Civic and CRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coat finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor, PCV breather pipe and vacuum lines (where equipped). The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-400R vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-201DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 185.99
Manufacturer : AEM Induction
SKU: 22121070-P
Tags:

Start of page
Brute Force HD Intake System

Product : Brute Force HD Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-9022DC Brute Force HD Diesel Air Intake System produces horsepower and torque gains on diesel engines by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific GMC Sierra 2500 HD, 3500 and Chevrolet Silverado 2500 HD, 3500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and air filter restriction gauge. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-9022DC vehicle applications to determine the legal status for each vehicle. Product Features:Estimated Horsepower Gain: 10.02 HP @ 2950 RPMReplacement Filter: 21-2259DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 410.99
Manufacturer : AEM Induction
SKU: 22121081-P
Tags:

Start of page
Brute Force HD Intake System

Product : Brute Force HD Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 21-9113DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford 250/350/450 Super Duty and Excursion models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, IAT sensor and filter minder gauge. The oval cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-9113DC vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-2259DKIncreased horsepowerTuned and dyno-tested to improve acceleration and engine soundLow restriction aluminum tubingEasy to install using commonly available toolsAir filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)Washable and reusable oil-free filter mediaAEM Lifetime Limited Warranty
**** PRICE: US$ 355.99
Manufacturer : AEM Induction
SKU: 22121091-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-407P Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-407P vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-201DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 193.99
Manufacturer : AEM Induction
SKU: 22121101-P
Tags:

Start of page
Short Ram Intake System

Product : Short Ram Intake System
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The AEM 22-404B Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine. The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Acura Integra GS-R models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose and any vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 22-404B vehicle applications to determine the legal status for each vehicle. Product Features:Replacement Filter: 21-202DKAffordable and simple horsepower upgradeImproved throttle response and engine soundLow restriction aluminum intake tubeEasy to install with common hand toolsLasts up to 100,000 miles before service is required (depending on driving conditions)Washable and reusable lifetime air filterAEM Lifetime Limited Warranty
**** PRICE: US$ 175.99
Manufacturer : AEM Induction
SKU: 22121111-P
Tags:

Start of page
4-1 Header, Ceramic Coating, 1 pc.

Product : 4-1 Header, Ceramic Coating, 1 pc.
Category : Air, Fuel, Emission & Exhaust|Exhaust|Exhaust Headers
Catalog : AAP Full Catalog
Description : DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.
**** PRICE: US$ 288.89
Manufacturer : DC Sports
SKU: 22121281-P
Tags:

Start of page
Replacement Air Filter

Product : Replacement Air Filter
Category : Routine Maintenance|Filters|Air Filters
Catalog : AAP Full Catalog
Description : K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need. Product Features:This is the last air filter your vehicle will ever need!Designed to boost horsepower and rate of accelerationCan be cleaned and used againHigh air flow with exceptional filtrationLasts up to 50,000 miles before cleaning is required depending on driving conditionsWorks with original equipment manufacturer vehicle electronicsEmissions legal in all 50 US statesWill NOT void vehicle warrantyMillion Mile Limited Warranty
**** PRICE: US$ 60.99
Manufacturer : K&N
SKU: 22121732-P
Tags:

Start of page
Universal Rubber Filter

Product : Universal Rubber Filter
Category : Routine Maintenance|Filters|Round Straight Air Filters
Catalog : AAP Full Catalog
Description : K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Product Features:Designed to increase horsepower and accelerationHundreds of sizes and shapes for most applicationsHigh air flow with excellent filtrationClamp-on washable and reusable air filterMalleable flangesOne year limited warranty
**** PRICE: US$ 65.99
Manufacturer : K&N
SKU: 22121744-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-1558KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Raider and Dodge Dakota models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-1558KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and a 10 millimeter wrench. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 6.14 HP @ 4200 RPMReplacement Filter: RF-1048Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 376.99
Manufacturer : K&N
SKU: 22121763-P
Tags:

Start of page
Universal Chrome Filter

Product : Universal Chrome Filter
Category : Routine Maintenance|Filters|Air Filters
Catalog : AAP Full Catalog
Description : K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Product Features:Designed to increase horsepower and accelerationHundreds of sizes and shapes for most applicationsHigh air flow with excellent filtrationClamp-on washable and reusable air filterMalleable flangesOne year limited warranty
**** PRICE: US$ 70.99
Manufacturer : K&N
SKU: 22121776-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-6016KS high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Pathfinder models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-6016KS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 329.99
Manufacturer : K&N
SKU: 22121790-P
Tags:

Start of page
Front End Cover - Vinyl, Black

Product : Front End Cover - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Front End Covers & Bras
Catalog : AAP Full Catalog
Description : LeBra Front End Covers by Covercraft are a stylish accessory that custom fits most vehicles. These full front end covers protect your car from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle's finish, protecting your paint and protecting your vehicle's value. Unexpected road damage is inevitable. With a LeBra front end cover you can have complete confidence that you are protected from paint chips that eventually cause rust, road tar that is almost impossible to remove, and bugs that are a pain to wash off. Great protection, great style, it's the easiest way to keep your vehicle in pristine condition! Backed by a 90-day warranty. Product Features:Full front end coverage protects all painted surfacesCompliments today's aerodynamic shaped vehiclesInstalls easily with no drilling or toolsCustom fit exactly to your vehicle
**** PRICE: US$ 84.99
Manufacturer : Le Bra
SKU: 22220163-P
Tags:

Start of page
Imposter Grille Overlay; 1 piece

Product : Imposter Grille Overlay; 1 piece
Category : Accessories, Body & Wipers|Detail and Body Repair|Hood & Front End
Catalog : AAP Full Catalog
Description : Gives your front end an aggressive facelift - elevates your ride's style to new heights. Product Features:Enhances the look of your vehicleEngineered to fit over original grilleTriple chrome-plated ABSQuick and easy installationMatches OEM chrome
**** PRICE: US$ 59.99
Manufacturer : Bully Truck
SKU: 22271252-P
Tags:

Start of page
Billet Fuel Door Cover

Product : Billet Fuel Door Cover
Category : Accessories, Body & Wipers|Detail and Body Repair|Fuel Doors & Related
Catalog : AAP Full Catalog
Description : Bully's Billet Aluminum Gas Doors are of the highest quality. They provide a quick way to give your truck or SUV a custom look with no drilling or cutting. Stainless steel hardware and chrome plated finish. Product Features:No drilling or cuttingStainless steel hardware
**** PRICE: US$ 58.99
Manufacturer : Bully Truck
SKU: 22271292-P
Tags:

Start of page
Door Handle Stainless Steel Cover

Product : Door Handle Stainless Steel Cover
Category : Accessories, Body & Wipers|Detail and Body Repair|Door Handle & Parts
Catalog : AAP Full Catalog
Description : Door Handle Covers radically enhance the look of your vehicle in minutes. Product Features:Custom to fit your vehicleCovers door handle and housingConstructed from T-304 stainless steelEasy Peel-N-Stick installationNo-hassle installation using pre-applied two-sided tapeNo drilling or cutting required and includes step-by-step instructions
**** PRICE: US$ 89.99
Manufacturer : Bully Truck
SKU: 22271630-P
Tags:

Start of page
Door Handle Stainless Steel Cover

Product : Door Handle Stainless Steel Cover
Category : Accessories, Body & Wipers|Detail and Body Repair|Door Handle & Parts
Catalog : AAP Full Catalog
Description : Door Handle Covers radically enhance the look of your vehicle in minutes. Product Features:Custom to fit your vehicleCovers door handle and housingConstructed from T-304 stainless steelEasy Peel-N-Stick installationNo-hassle installation using pre-applied two-sided tapeNo drilling or cutting required and includes step-by-step instructions
**** PRICE: US$ 38.99
Manufacturer : Bully Truck
SKU: 22271663-P
Tags:

Start of page
Engine Coolant Thermostat -Performance Powerstat 84-88 Fiero 16

Product : Engine Coolant Thermostat -Performance Powerstat 84-88 Fiero 16
Category : Cooling & Heating|Engine Cooling|Thermostats
Catalog : AAP Full Catalog
Description : Hypertech is a technology-driven company with a unique status in the aftermarket industry. Unlike other speed equipment manufacturers that produce hard parts like camshafts and cylinder heads, Hypertech's core product is knowledge; the ability to tune the complex computers that control essential functions in modern automobiles. Hypertech has invested in people, not machinery. The knowledge and skill of the Hypertech team are their most valuable assets. Their staff of engineers and technicians have degrees in a variety of disciplines, including electrical engineering, computer science, and mechanical engineering. Hypertech people know computers from the inside out! The Hypertech team is passionate about performance. They have racers, hot rodders, and performance enthusiasts on their staff. You'll find modified trucks and street machines in their employee parking lot. They build project cars and use their trucks for towing on weekends. They come from different backgrounds, but they have all learned to appreciate the tremendous power of electronic engine controls to improve performance on the street as well as on the race track.
**** PRICE: US$ 15.49
Manufacturer : Hypertech
SKU: 22330011-P
Tags:

Start of page
Engine Coolant Thermostat -Performance, 180 Degree for General Motors/Ford

Product : Engine Coolant Thermostat -Performance, 180 Degree for General Motors/Ford
Category : Cooling & Heating|Engine Cooling|Thermostats
Catalog : AAP Full Catalog
Description : Hypertech is a technology-driven company with a unique status in the aftermarket industry. Unlike other speed equipment manufacturers that produce hard parts like camshafts and cylinder heads, Hypertech's core product is knowledge; the ability to tune the complex computers that control essential functions in modern automobiles. Hypertech has invested in people, not machinery. The knowledge and skill of the Hypertech team are their most valuable assets. Their staff of engineers and technicians have degrees in a variety of disciplines, including electrical engineering, computer science, and mechanical engineering. Hypertech people know computers from the inside out! The Hypertech team is passionate about performance. They have racers, hot rodders, and performance enthusiasts on their staff. You'll find modified trucks and street machines in their employee parking lot. They build project cars and use their trucks for towing on weekends. They come from different backgrounds, but they have all learned to appreciate the tremendous power of electronic engine controls to improve performance on the street as well as on the race track.
**** PRICE: US$ 6.29
Manufacturer : Hypertech
SKU: 22330295-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-8001TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX Turbo and WRX STi Turbo models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8001TS air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's intake duct for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 15.85 HP @ 5050 RPMReplacement Filter: RP-5113Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessFilter lasts up to 100,000 miles before service is requiredReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 308.99
Manufacturer : K&N
SKU: 22400000-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-3043KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Colorado and GMC Canyon models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-3043KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone fuel pressure regulator Vacuum hose and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 9.24 HP @ 6057 RPMReplacement Filter: RF-1048Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 402.99
Manufacturer : K&N
SKU: 22400045-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Intakes are not legal for use in California and other US States adopting California emission standards. Product Features:Replacement Filter: RC-1645Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundReplaces entire factory air intake systemNot legal for highway use in states adopting California emission regulationsWashable and reusable lifetime air filterLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessK&N Million Mile Limited Warranty
**** PRICE: US$ 178.99
Manufacturer : K&N
SKU: 22400219-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Shop Performance Parts|Air, Fuel, Emission & Exhaust|Air Cleaner Assemblies
Catalog : AAP Full Catalog
Description : K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Intakes are not legal for use in California and other US States adopting California emission standards. Product Features:Replacement Filter: RC-5128Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundReplaces entire factory air intake systemNot legal for highway use in states adopting California emission regulationsWashable and reusable lifetime air filterLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessK&N Million Mile Limited Warranty
**** PRICE: US$ 107.99
Manufacturer : K&N
SKU: 22400399-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-8002TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Forester Turbo models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8002TS air intake comes with an ultra-lightweight carbon topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the turbo charger inlet tube for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers and a ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 17.71 HP @ 5484 RPMReplacement Filter: RP-5113Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessLasts up to 100,000 miles before service is required (depending on driving conditions)Replaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 334.99
Manufacturer : K&N
SKU: 22400476-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-3036KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-3036KP air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and air injection hose (where equipped) as well as a replacement silicone crank case vent hose and fuel pressure Vacuum hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 10.85 HP @ 5474 RPMReplacement Filter: RU-4730Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 330.99
Manufacturer : K&N
SKU: 22400499-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-9501TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-9501TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive chrome-like finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and air injection hose (on vehicles equipped with air injection). The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 10.03 HP @ 5079 RPMReplacement Filter: RU-4960Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLow restriction aluminum tubesEasy to install, usually in 90 minutes or lessFilter lasts up to 100,000 miles before service is requiredReplaces stock air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 341.99
Manufacturer : K&N
SKU: 22400516-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-1009TWR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura RSX Type-S and Honda Civic VI or SI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1009TWR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has a textured red powder-coat finish that's made to last and it accommodates the factory air temperature sensor, crank case vent hose and idle air bypass control thermal valve vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers and a ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 10.48 HP @ 7014 RPMReplacement Filter: RU-4870Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessFilter lasts up to 100,000 miles before service is requiredReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 201.99
Manufacturer : K&N
SKU: 22400559-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N PreCharger filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filter in dusty conditionsDurable polyester material with stitched elastic openingsCleanable with K&N Filter Cleaner
**** PRICE: US$ 25.99
Manufacturer : K&N
SKU: 22400579-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 31.99
Manufacturer : K&N
SKU: 22400607-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 31.99
Manufacturer : K&N
SKU: 22400620-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This is the last air filter your vehicle will ever need!This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 26.99
Manufacturer : K&N
SKU: 22400644-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Intakes are not legal for use in California and other US States adopting California emission standards. Product Features:Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundReplaces entire factory air intake systemNot legal for highway use in states adopting California emission regulationsWashable and reusable lifetime air filterLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessK&N Million Mile Limited Warranty
**** PRICE: US$ 153.99
Manufacturer : K&N
SKU: 22400725-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-2562 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Thunderbird V8 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2562 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, crank case vent hose and a replacement silicone evaporative vent line. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, a ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 15.75 HP @ 6000 RPMReplacement Filter: RC-4630Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessFree-flowing high density polyethylene tubeReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 318.99
Manufacturer : K&N
SKU: 22400805-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-2550 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford F150 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your F150's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2550 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed past the mass air sensor and through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensors, air temperature sensor and crank case vent hose. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, socket set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 7.58 HP @ 4891 RPMReplacement Filter: RC-5046Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessFree-flowing high density polyethylene tubeReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 342.99
Manufacturer : K&N
SKU: 22400856-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 36.99
Manufacturer : K&N
SKU: 22400875-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 52.99
Manufacturer : K&N
SKU: 22400889-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Routine Maintenance|Filters|Air Filters
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 40.99
Manufacturer : K&N
SKU: 22400908-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 26.99
Manufacturer : K&N
SKU: 22400938-P
Tags:

Start of page
Apollo Mounting Bracket

Product : Apollo Mounting Bracket
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filters Components
Catalog : AAP Full Catalog
Description : Mounting bracket and hardware for mounting a K&N Apollo Universal Air Intake to your vehicle. Product Features:Use with RC-5052AB Apollo Universal Cold Air IntakeProvides secure mounting for the Apollo systemIncludes L bracket and saddle bracketIncludes hose clamp and other mounting hardware
**** PRICE: US$ 21.99
Manufacturer : K&N
SKU: 22400956-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-7200TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Pontiac GTO models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7200TP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory mass air sensor and air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 15.39 HP @ 5100 RPMReplacement Filter: RC-5138Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessFilter lasts up to 100,000 miles before service is requiredReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 364.99
Manufacturer : K&N
SKU: 22400993-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-1545 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Jeep Grand Cherokee and Commander models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Jeep's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-1545 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The air intake assembly accommodates the factory Vacuum reservoir Vacuum line and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, socket set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 7.55 HP @ 5132 RPMReplacement Filter: RF-1048Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Replaces entire factory air intake systemFree-flowing high density polyethylene tubeEasy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 320.99
Manufacturer : K&N
SKU: 22401016-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-8432TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Pontiac Solstice and Saturn Sky models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8432TS air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 5.41 HP @ 4700 RPMReplacement Filter: RU-4990Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessFilter lasts up to 100,000 miles before service is requiredReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 329.99
Manufacturer : K&N
SKU: 22401050-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 19.99
Manufacturer : K&N
SKU: 22401158-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-1540KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Jeep Liberty models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-1540KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 366.99
Manufacturer : K&N
SKU: 22401268-P
Tags:

Start of page
Universal Cold Air Intake

Product : Universal Cold Air Intake
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filters Components
Catalog : AAP Full Catalog
Description : K&N's APOLLO CIS is a universal "Cold Air Intake System". The Apollo's specially designed shape increases volumetric efficiency and is made of durable lightweight material for cooler air intake. The Apollo incorporates a K&N famous cotton gauze filter which is removable for periodic cleaning and provides the benefits of an open cone filter and standard air box in one unit. Heat build up is reduced which keeps the intake charge cool. Smooth internal features minimize air turbulence and maximize air flow. The Apollo is ideal for normally aspired engines up to 250BHP and turbo engines up to 350BHP. It comes with a standard 70mm base flange with a range of optional stepped adapters available to allow fitment to other intake sizes. Product Features:Replacement Filter: RC-5052Designed to increase horsepower and accelerationIncludes injection-molded filter housing and cold air inletWashable and reusable lifetime air filterHigh air flow with excellent filtrationNot legal for highway use in states adopting California emission regulationsOne year limited warranty
**** PRICE: US$ 234.99
Manufacturer : K&N
SKU: 22401284-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-8701TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Lexus IS250 and IS350 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8701TP air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory mass air flow sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, diagonal cutters, needle nose pliers, ratchet set and some wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Product Features:Estimated Horsepower Gain: 12.06 HP @ 5852 RPMReplacement Filter: RU-5176Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLow restriction aluminum tubeEasy to install, usually in 90 minutes or lessLasts up to 100,000 miles before service is required (depending on driving conditions)Replaces stock air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 296.99
Manufacturer : K&N
SKU: 22401301-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-3048 FIPK air intake system replaces the restrictive factory air filter and air intake. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-3048 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 19.25 HP @ 5133 RPMReplacement Filter: RF-1032Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessFree-flowing high density polyethylene tubeReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 307.99
Manufacturer : K&N
SKU: 22401350-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 69-6544TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6544TS air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coated finish that's made to last and accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are several screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 6.73 HP @ 5100 RPMReplacement Filter: RU-4950Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeEasy to install, usually in 90 minutes or lessLasts up to 100,000 miles before service is required (depending on driving conditions)Replaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 324.99
Manufacturer : K&N
SKU: 22401396-P
Tags:

Start of page
Air Filter Wrap

Product : Air Filter Wrap
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Filter Hardware
Catalog : AAP Full Catalog
Description : The K&N Drycharger is a silicone treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow high air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited. Product Features:This product wraps your air filter with an additional pre-filterExtends service interval of your K&N filterDurable silicone treated polyester material with stitched elastic openingsWater repellent treatment typically lasts 1 to 2 years
**** PRICE: US$ 46.99
Manufacturer : K&N
SKU: 22401411-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-1553 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Jeep Wrangler models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Jeep's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-1553 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, a ratchet set and an Allen wrench. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 8.17 HP @ 4807 RPMReplacement Filter: RF-1048Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Replaces entire factory air intake systemFree-flowing high density polyethylene tubeEasy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 289.99
Manufacturer : K&N
SKU: 22401427-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 77-1559KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Jeep Liberty models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-1559KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Product Features:Estimated Horsepower Gain: 10.01 HP @ 4800 RPMReplacement Filter: RF-1048Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundFree-flowing aluminum tubeReplaces entire factory air intake systemLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 366.99
Manufacturer : K&N
SKU: 22401455-P
Tags:

Start of page
Performance Intake Kit

Product : Performance Intake Kit
Category : Air, Fuel, Emission & Exhaust|Filters and Emissions|Air Intake Kits
Catalog : AAP Full Catalog
Description : The K&N 57-3055 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet SSR models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-3055 air intake comes with a K&N ultra-lightweight carbon fiber top and flanged high-flow air filter that directs air into the custom molded intake for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less, and requires a flat blade screwdriver to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty. Product Features:Estimated Horsepower Gain: 13.76 HP @ 4700 RPMReplacement Filter: RP-5115Guaranteed to increase horsepowerDesigned to improve throttle response and engine soundLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessFree-flowing high density polyethylene tubeReplaces entire factory air intake systemWashable and reusable lifetime air filterK&N Million Mile Limited Warranty
**** PRICE: US$ 461.99
Manufacturer : K&N
SKU: 22401469-P
Tags:

Start of page
Truck Cab Cooler -  Polycotton, Gray

Product : Truck Cab Cooler - Polycotton, Gray
Category : Accessories, Body & Wipers|Detail and Body Repair|Trunk & Tailgate
Catalog : AAP Full Catalog
Description : Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV's. Product Features:Protects Cab Area From UV & Heat Build-upAlso Good For Snow & Ice ProtectionEasy to InstallStow Behind Seat
**** PRICE: US$ 124.89
Manufacturer : Covercraft
SKU: 22550105-P
Tags:

Start of page
Truck Cab Cooler -  Polycotton, Gray

Product : Truck Cab Cooler - Polycotton, Gray
Category : Accessories, Body & Wipers|Detail and Body Repair|Trunk & Tailgate
Catalog : AAP Full Catalog
Description : Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV's. Product Features:Protects Cab Area From UV & Heat Build-upAlso Good For Snow & Ice ProtectionEasy to InstallStow Behind Seat
**** PRICE: US$ 124.89
Manufacturer : Covercraft
SKU: 22550131-P
Tags:

Start of page
Truck Cab Cooler -  Polycotton, Gray

Product : Truck Cab Cooler - Polycotton, Gray
Category : Accessories, Body & Wipers|Detail and Body Repair|Trunk & Tailgate
Catalog : AAP Full Catalog
Description : Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV's. Product Features:Protects Cab Area From UV & Heat Build-upAlso Good For Snow & Ice ProtectionEasy to InstallStow Behind Seat
**** PRICE: US$ 157.69
Manufacturer : Covercraft
SKU: 22550155-P
Tags:

Start of page
Truck Cab Cooler -  Polycotton, Gray

Product : Truck Cab Cooler - Polycotton, Gray
Category : Accessories, Body & Wipers|Detail and Body Repair|Trunk & Tailgate
Catalog : AAP Full Catalog
Description : Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV's. Product Features:Protects Cab Area From UV & Heat Build-upAlso Good For Snow & Ice ProtectionEasy to InstallStow Behind Seat
**** PRICE: US$ 124.89
Manufacturer : Covercraft
SKU: 22550181-P
Tags:

Start of page
Truck Cab Cooler -  Polycotton, Gray

Product : Truck Cab Cooler - Polycotton, Gray
Category : Accessories, Body & Wipers|Detail and Body Repair|Trunk & Tailgate
Catalog : AAP Full Catalog
Description : Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV's. Product Features:Protects Cab Area From UV & Heat Build-upAlso Good For Snow & Ice ProtectionEasy to InstallStow Behind Seat
**** PRICE: US$ 157.69
Manufacturer : Covercraft
SKU: 22550203-P
Tags:

Start of page
Deflector Reflector Hood Mask - Vinyl, Black

Product : Deflector Reflector Hood Mask - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Bug Guards & Shields
Catalog : AAP Full Catalog
Description : The Deflector-Reflector is a unique hood protector that has a built-in bug deflector. Specially designed at the top of the hood is a reinforced bug deflector that creates a swirling wind action that diverts most bugs, dirt or road debris away from your windshield. This bug deflector can easily be removed and stored in the trunk or behind your seat. Installation is quick and easy in just minutes. Protect your vehicle's paint and windshield with this unique protector. Product Features:Hood Protector with Bug DeflectorCustom for Popular SUV's & PickupsHeavy-Duty Vinyl with Soft Fleece BackingEasy To Install / RemoveUse In Any WeatherWarranty: 90 Days
**** PRICE: US$ 65.69
Manufacturer : Covercraft
SKU: 22551386-P
Tags:

Start of page
HID Headlight Ballast

Product : HID Headlight Ballast
Category : Battery, Electrical & Wiring|Electrical and Wiring|Headlamps & Lights
Catalog : AAP Full Catalog
Description : Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part. Product Features:Heavy-duty casings around electronics ensure durabilityInternal circuitry matches OE design to ensure performance"Plug & play" design means no need for reprogrammingDOT-certified to comply with Federal Motor Vehicle Safety StandardsDirect OE replacement matches fit, form, and function of originalAll TechSmart parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time
**** PRICE: US$ 326.99
Manufacturer : Tech Smart
SKU: 10429578-P
Tags:

Start of page
Two-Piece Front End Cover - Vinyl, Black

Product : Two-Piece Front End Cover - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Front End Covers & Bras
Catalog : AAP Full Catalog
Description : Covercraft's Custom Mask provides protection to your vehicle's nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle's finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty. Product Features:Full Front Area ProtectionProtects Against Bugs, Rock ChipsHood Opens with Mask In Place (MM Series)Heavy Duty Vinyl with Soft Fleece BackCustom Patterned for Easy InstallationWarranty: 90 Days
**** PRICE: US$ 137.99
Manufacturer : Covercraft
SKU: 22552362-P
Tags:

Start of page
Mini Mask - Vinyl, Black

Product : Mini Mask - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Bug Guards & Shields
Catalog : AAP Full Catalog
Description : The Mini Mask is designed to protect the area of the hood that takes the most abuse from road debris, bugs, tar, you name it. Crafted from top quality black vinyl with a stylish leather grain finish. The inside is made of a soft fleecy fabric that will help to protect your paint's polish. Reinforced air foils ensure the cover to not flap in the wind. Custom cut for your exact vehicle. Backed with a 3-month warranty. Provides protection to one of the most heavy wear-and-tear parts of your vehicle exterior, Easy to remove for washing and waxing, Simple, no-drill installation, Adds sports appeal to your vehicle, Constructed from sturdy black vinyl. Product Features:Protects leading edge of hoodCustom fit for a superior snug fitEasy to installHeavy-duty vinyl with a soft fleece backing to protect your paint finish90-day warranty
**** PRICE: US$ 52.59
Manufacturer : Covercraft
SKU: 22552452-P
Tags:

Start of page
Mini Mask - Vinyl, Black

Product : Mini Mask - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Bug Guards & Shields
Catalog : AAP Full Catalog
Description : The Mini Mask is designed to protect the area of the hood that takes the most abuse from road debris, bugs, tar, you name it. Crafted from top quality black vinyl with a stylish leather grain finish. The inside is made of a soft fleecy fabric that will help to protect your paint's polish. Reinforced air foils ensure the cover to not flap in the wind. Custom cut for your exact vehicle. Backed with a 3-month warranty. Provides protection to one of the most heavy wear-and-tear parts of your vehicle exterior, Easy to remove for washing and waxing, Simple, no-drill installation, Adds sports appeal to your vehicle, Constructed from sturdy black vinyl. Product Features:Protects leading edge of hoodCustom fit for a superior snug fitEasy to installHeavy-duty vinyl with a soft fleece backing to protect your paint finish90-day warranty
**** PRICE: US$ 52.59
Manufacturer : Covercraft
SKU: 22552527-P
Tags:

Start of page
Mini Mask - Vinyl, Black

Product : Mini Mask - Vinyl, Black
Category : Accessories, Body & Wipers|Accessories|Bug Guards & Shields
Catalog : AAP Full Catalog
Description : The Mini Mask is designed to protect the area of the hood that takes the most abuse from road debris, bugs, tar, you name it. Crafted from top quality black vinyl with a stylish leather grain finish. The inside is made of a soft fleecy fabric that will help to protect your paint's polish. Reinforced air foils ensure the cover to not flap in the wind. Custom cut for your exact vehicle. Backed with a 3-month warranty. Provides protection to one of the most heavy wear-and-tear parts of your vehicle exterior, Easy to remove for washing and waxing, Simple, no-drill installation, Adds sports appeal to your vehicle, Constructed from sturdy black vinyl. Product Features:Protects leading edge of hoodCustom fit for a superior snug fitEasy to installHeavy-duty vinyl with a soft fleece backing to protect your paint finish90-day warranty
**** PRICE: US$ 52.59
Manufacturer : Covercraft
SKU: 22552589-P
Tags:

Start of page

 

 

 


www.sapiensman.com