Shop Online

www.sapiensman.com



 

 

 

  HOME : Sapiensman Shop Online -

  GET PAID BY MARKETPLACES & DIRECT CLIENTS WORLDWIDE. Quick, low-cost and secure solutions to pay and get paid globally. Sign up for Payoneer !



 

Jeep Accessories & Jeep Parts for the Wrangler, Cherokee, & Liberty. Your Jeep accessories & Jeep parts source with low prices and FREE shipping on Jeep Wrangler tires, wheels, bumpers, tops, lift kits, & more. 

 

<< Previous Catalog - Home - Next Catalog >>



#50 << Previous Page - Page #1 - Next Page >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 -
Lube Locker Chrysler 8.25in. Differential Cover Gasket - LLRC825


Lube Locker Chrysler 8.25in. Differential Cover Gasket - LLRC825
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLRC825
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLRC825

Start of page
Chrysler 9.25


Chrysler 9.25" Differential Cover Gasket
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Chrysler 9.25;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-C925
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-C925

Start of page
Lube Locker AAM 11.5


Lube Locker AAM 11.5" Differential Cover Gasket - LLR-A115
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
AAM 11.5 axle;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-A115
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-A115

Start of page
Lube Locker Dana 25/27/30 Differential Cover Gasket - LLR-D030


Lube Locker Dana 25/27/30 Differential Cover Gasket - LLR-D030
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Dana 30;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time;Will also fit Dana 25 and 27 axles Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-D030
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-D030

Start of page
Dana 80 Differential Cover Gasket


Dana 80 Differential Cover Gasket
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Dana 80;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-D080
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-D080

Start of page
Lube Locker AAM 9.25


Lube Locker AAM 9.25" Differential Cover Gasket - LLR-A925
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
AAM 9.25 front axle;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-A925
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-A925

Start of page
Lube Locker Dana 35 Differential Cover Gasket - LLR-D035


Lube Locker Dana 35 Differential Cover Gasket - LLR-D035
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Dana 35;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-D035
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-D035

Start of page
Lube Locker Ford 10.25in. / 10.5in. Differential Gasket - LLR-F105


Lube Locker Ford 10.25in. / 10.5in. Differential Gasket - LLR-F105
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
No additional sealant needed;Elastomer beading on both sides of gasket;No Setup Tme Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-F105
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-F105

Start of page
Ford 9


Ford 9" Differential Cover Gasket
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Ford 9;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-C900
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-C900

Start of page
Lube Locker Dana 44 Differential Cover Gasket - LLR-D044


Lube Locker Dana 44 Differential Cover Gasket - LLR-D044
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Dana 44;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time;Will not fit Nissan Titan Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-D044
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-D044

Start of page
Lube Locker Ford 8.8in. Differential Cover Gasket - LLR-F880


Lube Locker Ford 8.8in. Differential Cover Gasket - LLR-F880
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Ford 8.8 inch;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time;Will not fit IFS front or IRS rear Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-F880
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-F880

Start of page
Lube Locker GM 8.5in. / 8.6in.10 Bolt Differential Gasket - LLR-G850


Lube Locker GM 8.5in. / 8.6in.10 Bolt Differential Gasket - LLR-G850
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
No additional sealant needed;Elastomer beading on both sides of gasket;No setup time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-G850
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-G850

Start of page
Lube Locker Transmission Pan Gasket - LLT-G400


Lube Locker Transmission Pan Gasket - LLT-G400
Drivetrain & Differential>Automatic Transmissions>Auto Trans Oil Pan Gasket
New Product Catalog
Turbo 400 transmission pan gasket Lube Locker gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on both sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 27.99
Manufacturer : Lube Locker
SKU: LULLLT-G400
UPC:
Tags: truck parts truck accessories Lube Locker, Automatic Transmissions, LULLLT-G400

Start of page
Mishimoto Radiator Coolant Hose Kit - HLIBT05TBL


Mishimoto Radiator Coolant Hose Kit - HLIBT05TBL
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
05-06 Liberty;2.8L CRD Turbo engine;Blue;Max temperature of 330F;Made of high grade silicone and heat resistant fibers;Efficiently reduces heat;Increases pressure tolerance;Lifetime warranty;MFG SKU: MMHOSE-LIBT-05TBL Rubber is out, silicone is in! Upgrade your old Jeep Wrangler radiator hoses with the Mishimoto 1991-95 Jeep Wrangler YJ I6 radiator hose kit to provide your Jeep with an advancement in both style and reliability. This kit includes both the upper and lower Wrangler radiator hoses, as well as four worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Jeep Wrangler currently has, every Mishimoto silicone hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are rock crawling your Jeep or taking it down a trail, trust Mishimoto with all your Jeep parts. This silicone hose kit is available in black, blue, or red and, like all our Jeep Wrangler parts, includes the Mishimoto Lifetime Warranty.
**** PRICE: USD 252.99
Manufacturer : Mishimoto
SKU: M/AHLIBT05TBL
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AHLIBT05TBL

Start of page
Lube Locker Dana 60 Differential Cover Gasket - LLR-D060


Lube Locker Dana 60 Differential Cover Gasket - LLR-D060
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Dana 60;No additional sealant needed;Elastomer beading on both sides of gasket;No setup time;Will also fit Dana 61 and Dan 50 Solid Axle Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-D060
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-D060

Start of page
Lube Locker Ford 9.75 Differential Gasket - LLR-F975


Lube Locker Ford 9.75 Differential Gasket - LLR-F975
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
Ford 9.75 axle;No additional sealant needed;Elastomer beading on both sides of gasket;No set up time Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Lockers signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-F975
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-F975

Start of page
Mishimoto Radiator Coolant Hose Kit - HLIBT05TRD


Mishimoto Radiator Coolant Hose Kit - HLIBT05TRD
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
05-06 Liberty;2.8L CRD Turbo engine;Red;Max temperature of 330F;Made of high grade silicone and heat resistant fibers;Efficiently reduces heat;Increases pressure tolerance;Lifetime warranty;MFG SKU: MMHOSE-LIBT-05TRD Rubber is out, silicone is in! Upgrade your old Jeep Wrangler radiator hoses with the Mishimoto 1991-95 Jeep Wrangler YJ I6 radiator hose kit to provide your Jeep with an advancement in both style and reliability. This kit includes both the upper and lower Wrangler radiator hoses, as well as four worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Jeep Wrangler currently has, every Mishimoto silicone hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are rock crawling your Jeep or taking it down a trail, trust Mishimoto with all your Jeep parts. This silicone hose kit is available in black, blue, or red and, like all our Jeep Wrangler parts, includes the Mishimoto Lifetime Warranty.
**** PRICE: USD 252.99
Manufacturer : Mishimoto
SKU: M/AHLIBT05TRD
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AHLIBT05TRD

Start of page
Lube Locker GM 10.5in. 14 Bolt Differential Cover Gasket - LLR-G014


Lube Locker GM 10.5in. 14 Bolt Differential Cover Gasket - LLR-G014
Drivetrain & Differential>Performance Axle Components>Differential Gasket
New Product Catalog
No additional sealant needed;Elastomer beading on both sides of gasket;No setup time;Will not fit Dodge Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
**** PRICE: USD 21.99
Manufacturer : Lube Locker
SKU: LULLLR-G014
UPC:
Tags: truck parts truck accessories Lube Locker, Performance Axle Components, LULLLR-G014

Start of page
Mishimoto Radiator Coolant Hose Kit - HLIBT05TBK


Mishimoto Radiator Coolant Hose Kit - HLIBT05TBK
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
05-06 Liberty;2.8L CRD Turbo engine;Black;Max temperature of 330F;Made of high grade silicone and heat resistant fibers;Efficiently reduces heat;Increases pressure tolerance;Lifetime warranty;MFG SKU: MMHOSE-LIBT-05TBK Rubber is out, silicone is in! Upgrade your old Jeep Wrangler radiator hoses with the Mishimoto 1991-95 Jeep Wrangler YJ I6 radiator hose kit to provide your Jeep with an advancement in both style and reliability. This kit includes both the upper and lower Wrangler radiator hoses, as well as four worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Jeep Wrangler currently has, every Mishimoto silicone hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are rock crawling your Jeep or taking it down a trail, trust Mishimoto with all your Jeep parts. This silicone hose kit is available in black, blue, or red and, like all our Jeep Wrangler parts, includes the Mishimoto Lifetime Warranty.
**** PRICE: USD 252.99
Manufacturer : Mishimoto
SKU: M/AHLIBT05TBK
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AHLIBT05TBK

Start of page
Mishimoto Radiator Coolant Hose Kit - HOSEWR403BK


Mishimoto Radiator Coolant Hose Kit - HOSEWR403BK
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
03-06 Wrangler TJ;2.4L 4 cylinder engine;Black;Max temperature of 330F;Made of high grade silicone and heat resistant fibers;Efficiently reduces heat;Increases pressure tolerance;Lifetime warranty;MFG SKU: MMHOSE-WR4-03BK Performance Jeeps deserve Jeep performance parts. Mishimoto Jeep Wrangler radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style. Like all our Jeep Wrangler parts, these silicone radiator hoses come with our signature Lifetime Warranty.
**** PRICE: USD 132.99
Manufacturer : Mishimoto
SKU: M/AHOSEWR403BK
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AHOSEWR403BK

Start of page
Mishimoto Thermostatic Oil Cooler in Black - MMOC-UTBK


Mishimoto Thermostatic Oil Cooler in Black - MMOC-UTBK
Replacement Under Hood Parts>Replacement Cooling Parts>JK Wrangler Cooling Parts
New Product Catalog
Universal;10 row stacked plate cooler;Withstands high fluid pressures;Reduces oil temperatures and exhibits minimal pressure loss;Includes: Oil cooler,hoses,fittings,seals,o-ring,key plugs, sandwich plate and plate adapters;Lifetime warranty Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The included core is our proven Mishimoto 10 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a 3/4 -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all their products this kit includes the Mishimoto Lifetime Warranty
**** PRICE: USD 340.99
Manufacturer : Mishimoto
SKU: M/AMMOC-UTBK
UPC:
Tags: truck parts truck accessories Mishimoto, Replacement Cooling Parts, M/AMMOC-UTBK

Start of page
Mishimoto Thermostatic Oil Cooler - MMOC-WRA-07T


Mishimoto Thermostatic Oil Cooler - MMOC-WRA-07T
Heating & Cooling>Engine & Transmission Cooling>Engine Oil Cooler
New Product Catalog
07-11 Wrangler JK, 2 & 4 Door;3.8L 6 cylinder engine;Silver cooler;Reduces oil temperature by up to 40 degrees;Increases oil capacity by .75 qt;Premade braides stainless steel oil lines with AN fittings;Lifetime warranty Your high-performance JK demands a cooling solution that can keep up in the most extreme environments. Whether you are cruising through the dunes or hitting the trails, properly regulated oil temperatures are vital to the life of your engine. Excessive temperatures result in rapid oil degradation and can put a quick end to a fun day in your rig. Mishimoto has the perfect solution for controlling oil temperatures - the Jeep JK direct-fit oil cooler kit. This kit utilizes precision-engineered JK-specific mounting brackets, pre-made stainless steel lines, oil filter sandwich plate, and all hardware necessary for a quick and easy installation. The Mishimoto Jeep Wrangler JK Oil Cooler Kit adds .75 qt to your oil capacity and reduces temperatures by up to 40 degrees F while maintaining minimal pressure drop.
**** PRICE: USD 446.99
Manufacturer : Mishimoto
SKU: M/AMMOC-WRA-07T
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMOC-WRA-07T

Start of page
Mishimoto Performance Aluminum Radiator - MMRAD-WRA-87


Mishimoto Performance Aluminum Radiator - MMRAD-WRA-87
Heating & Cooling>Engine & Transmission Cooling>Radiator
New Product Catalog
87-06 Wrangler TJ/YJ;2.5L 4 cylinder and 4.0L 6 cylinder engine;Automatic and manual transmissions;2 row core;All aluminum;OE mounting points for a direct fit;Proven 20 degree temperature drop;Increases fluid capacity by .36 gallons;Includes radiator cap;Overall dimensions 25.8 x 23 x 3.7;Lifetime warranty The Mishimoto Performance Aluminum Radiator for the Jeep Wrangler YJ and Jeep Wrangler TJ is the ideal upgrade to the stock Jeep Wrangler radiator. It is designed and specifically engineered to maximize cooling efficiency by up to 20%, boost engine functions, and protect your car from overheating. Whether you use your Jeep TJ or Jeep YJ for daily driving or as a powerhouse for off-roading, many people overlook the importance of installing an upgraded radiator in their engine. The stock radiator is unable handle the heat that comes along with having this much horsepower. The Mishimoto Jeep TJ radiator / Jeep YJ radiator features a lightweight dual core, 100% brazed aluminum, polished end tanks, and holds up to .36/gal more coolant. The Mishimoto Jeep Wrangler radiator showed a 20 degrees F drop in outlet temp compared to the OEM. See the Engineering Report for full details. Every Mishimoto Performance TJ and YJ Radiator is a direct OEM fit, making installation effortless on your Jeep Wrangler, with no cutting or modification required. All Mishimoto radiators come with a lifetime warranty.
**** PRICE: USD 360.99
Manufacturer : Mishimoto
SKU: M/AMMRAD-WRA-87
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMRAD-WRA-87

Start of page
Mishimoto Performance Conversion Radiator - MMRADWRAV887X


Mishimoto Performance Conversion Radiator - MMRADWRAV887X
Heating & Cooling>Engine & Transmission Cooling>Radiator
New Product Catalog
87-04 Wrangler TJ/YJ;Chevrolet LS V8 conversion;3 cores;Aluminum;Internal transmission cooler;3 core;Magnetic drain plug;Lifetime warranty Performance Jeeps deserve Jeep performance parts. An ideal upgrade for your modified Jeep LS swap, this 1987 - 2004 Jeep Wrangler Performance Aluminum Radiator is designed to handle the additional cooling needs of your Jeep Wrangler V8 swap. Whether you use your Jeep LS swap for daily driving or hit the trail on the weekends, many people overlook the importance of installing an upgraded radiator in their engine. The Mishimoto Jeep Wrangler with a Chevy V8 Engine Swap X-Line Aluminum Radiator is manufactured using durable aircraft-quality aluminum end tanks, precision TIG-welded to an efficient brazed aluminum core. The inlet and outlets provide precise leak-free connections. This performance aluminum radiator also includes a Magnetic Drain Plug, which effectively removes metal fragments circulating in the cooling system. As with all our Jeep Wrangler parts, this Jeep LS swap radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
**** PRICE: USD 348.99
Manufacturer : Mishimoto
SKU: M/AMMRADWRAV887X
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMRADWRAV887X

Start of page
Silicone Coolant Hose Kit


Silicone Coolant Hose Kit
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
90-97 Cherokee XJ;Includes upper and lower radiator hoses;4.0L 6 cylinder engine;Red;Constructed from five layers of silicone with heat-resistant embedded fibers;Improves heat and pressure tolerance;Includes high-quality worm-gear clamps for ease of installation;Mishimoto Lifetime Warranty Performance Jeeps deserve Jeep performance parts. Mishimoto Jeep Wrangler radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style. Like all our Jeep Wrangler parts, these silicone radiator hoses come with our signature Lifetime Warranty.
**** PRICE: USD 120.99
Manufacturer : Mishimoto
SKU: M/AMMHOSE-XJ6-91RD
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMHOSE-XJ6-91RD

Start of page
Mishimoto Aluminum Oil Catch Can - Large - MMOCC-LA


Mishimoto Aluminum Oil Catch Can - Large - MMOCC-LA
Heating & Cooling>Engine & Transmission Cooling>Engine Oil Catch Cans
New Product Catalog
Universal applications;Prevents oil from getting into pressurized turbo plumbing;Round polished aluminum;30 oz. capacity;Includes: Can, 4 o-ring clamps, magnetic plug, hoses, mounting bracket and hardware;Mishimoto Lifetime Warranty The Mishimoto Aluminum Oil Catch Can will prevent a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Our catch can prevents oil from getting into pressurized turbo plumbing and stops oil vapors from getting into the intake system that would ultimately lead to lower combustion temperatures and reduced overall efficiency. The polished Mishimoto Aluminum Oil Catch Can comes complete as a kit containing a mounting bracket, hose, all necessary clamps, fittings, and mounting hardware, for a perfect upgrade in performance and aesthetics for your car.
**** PRICE: USD 93.99
Manufacturer : Mishimoto
SKU: M/AMMOCC-LA
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMOCC-LA

Start of page
Mishimoto Liquid Chill Additive - MMRA-LC


Mishimoto Liquid Chill Additive - MMRA-LC
Performance Parts>Fluids, Additives and Sealants>Engine Coolant & Coolant Additives
New Product Catalog
4 fluid oz.;Use 2 bottles of Liquid Chill for trucks and SUVs;Non corrosive and 100% recyclable;Reduces engine temperatures Mishimoto Liquid Chill radiator coolant additive is a simple yet effective way to reduce engine temperatures. This additive is compatible with all coolant types and does not require mixing. Mishimoto Liquid Chill is proven to reduce engine temperatures and is suitable for use in any liquid-cooled engine, including your diesel pull truck, road course hatchback, or trail riding dirt bike. Mishimoto Liquid Chill is safe for use with all alloys and is formulated with a corrosion inhibitor, which not only prevents future corrosion but also will reduce pre-existing buildup. This additive is 100% biodegradable, non-corrosive, and nontoxic, making it a safe and effective solution for reducing high coolant temperatures. The ultra concentrated formula means you need only one small bottle for a car or dirt bike and two small bottles for a larger truck.
**** PRICE: USD 15.99
Manufacturer : Mishimoto
SKU: M/AMMRA-LC
UPC:
Tags: truck parts truck accessories Mishimoto, Fluids, Additives and Sealants, M/AMMRA-LC

Start of page
Silicone Coolant Hose Kit


Silicone Coolant Hose Kit
Heating & Cooling>Engine & Transmission Cooling>Radiator Coolant Hose
New Product Catalog
97-06 Wrangler TJ/LJ;Includes upper and lower radiator hoses;4.0L 6 cylinder engine;Olive drab;Made of high grade silicone and heat-resistant embedded fibers;Efficiently reduces heat;Max temperature of 330 F;Mishimoto Lifetime Warranty Performance Jeeps deserve Jeep performance parts. Mishimoto Jeep Wrangler radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style. Like all our Jeep Wrangler parts, these silicone radiator hoses come with our signature Lifetime Warranty.
**** PRICE: USD 111.99
Manufacturer : Mishimoto
SKU: M/AMMHOSE-WR6-97OD
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMHOSE-WR6-97OD

Start of page
Mishimoto Liquid Chill Premixed Synthetic Engine Coolant - MMRALC-5050F


Mishimoto Liquid Chill Premixed Synthetic Engine Coolant - MMRALC-5050F
>>WK2 Grand Cherokee Cooling Parts
New Product Catalog
1 Gallon;Premixed 50/50 so you can just pour it in;Protects against boilover to 265 F and freezing to -26 Deg.F;Reduces engine wear;Drops operating temperatures;Inhibits corrosion;Seals pinhole leaks;Formulated for all radiator types;Safe for all gas/diesel engines;Provides year-round protection Do you hear that? That little sigh that's coming from your engine bay? That's your radiator asking for Mishimoto Liquid Chill Synthetic Engine Coolant. Formulated to operate flawlessly under extreme conditions and with both gasoline and diesel, Liquid Chill will help your engine warm up quickly and maintain ideal operating temperatures. Liquid Chill Synthetic Engine Coolant technology combines an inherently nontoxic propylene glycol base with unique poly organic additives (POAT) to allow a service life that can exceed 7+ years or 750,000 miles in Heavy Duty (diesel) applications and over 2+ years or 250,000 miles in Light Duty (gasoline) applications, although Mishimoto engineers recommend consulting your service manual for application-specific guidelines. Liquid Chill Synthetic Engine Coolant is designed to meet or exceed all stock specifications and exceeds the specs needed to pass ASTM D6210 and ASTM D3306 coolant tests. Its premixed with deionized water, so its ready to use and safe for all water-cooled engines, protecting against boilover to 265 degrees F and freezing to -26 degrees F (with 15 psi cap). The proprietary formula doesn't contain any nasty nitrates, amines, high-fructose corn syrup, phosphates, silicates, borates, and all those other ates that will clog up thermostats and radiators, and cause excessive wear on water pumps. However, Mishimoto engineers strongly recommend that you and your children do NOT consume this coolant. Seriously, don't drink it, and keep it on a high shelf so kids and pets can't get to it.
**** PRICE: USD 39.99
Manufacturer : Mishimoto
SKU: M/AMMRALC-5050F
UPC:
Tags:

Start of page
Mishimoto Magnetic Oil Drain Plug - MMODP-1415B


Mishimoto Magnetic Oil Drain Plug - MMODP-1415B
Performance Parts>Engine Oiling System>Oil Drain Plug
New Product Catalog
M14 x 1.5;Black;Made from 6061 aluminum;Includes Dowty Seal Bearing damage is a serious concern for any high-performance or high-mileage engine. Mishimoto Magnetic Oil Drain Plugs remove metal fragments in engine oil, thus extending and protecting the life of your engine. These oil drain plugs are constructed from billet 6061 aluminum with a powerful neodymium magnet. This magnet collects bearing and other harmful metallic fragments in engine oil, effectively removing them from circulation. This drain plug features a robust 24mm hex head and precise, durable threads for consistent use without stripping. Mishimoto Magnetic Oil Drain Plugs include a dependable dowty seal for superior protection against leaks. This M14 x 1. 5 oil drain plug fits the GMC/Chevrolet Duramax trucks, and many others.
**** PRICE: USD 15.99
Manufacturer : Mishimoto
SKU: M/AMMODP-1415B
UPC:
Tags: truck parts truck accessories Mishimoto, Engine Oiling System, M/AMMODP-1415B

Start of page
Mishimoto Transmission Fluid Cooler - MMTC-TF-1212


Mishimoto Transmission Fluid Cooler - MMTC-TF-1212
Heating & Cooling>Engine & Transmission Cooling>Auto Trans Oil Cooler
New Product Catalog
Universal application;12 inch x 10 inch x 0.75 inch;Efficient, lightweight, tube-and-fin design;3/8 inch push-on fittings;Includes: 5 ft of durable rubber hose, a universal mounting kit, and 4 worm-gear clamps;Mishimoto Lifetime Warranty Keep high fluid temperatures at bay with a Mishimoto Universal Transmission Fluid Cooler! This cooler features a highly efficient 12 x 10 x 0.75 tube-and-fin core that promotes dramatic temperature drops. Mishimoto universal fluid coolers are applicable for use with transmission fluid, engine oil, power steering fluid, and a variety of other automotive fluids. This ready-to-install kit includes 5' of durable rubber hose, a universal mounting kit, and a four worm-gear clamps for secure connections. The universal mounting kit provides installation flexibility to fit any application. This cooler utilizes 3/8 push-on fittings, perfect for use as a replacement for a damaged factory cooler, or as an upgrade to a vehicle not equipped with a liquid-to-air cooler. As with all their products, this fluid cooler includes the Mishimoto Lifetime Warranty
**** PRICE: USD 72.99
Manufacturer : Mishimoto
SKU: M/AMMTC-TF-1212
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMTC-TF-1212

Start of page
Mishimoto Coolant Reservoir Tank - MMRT-CA


Mishimoto Coolant Reservoir Tank - MMRT-CA
Heating & Cooling>Engine & Transmission Cooling>Engine Coolant Recovery Tank
New Product Catalog
Polished Aluminum;Comes with mounting bracket, hardware and hose;850cc capacity;Lifetime warranty Whether you want to finish off the look of a tucked engine bay, or you just want to replace the dull, stock plastic tank, the Mishimoto Aluminum Coolant Reservoir Tank is the perfect solution. Offered as a comprehensive kit, complete with a mounting bracket, hardware, and reinforced hose. Available in three colors, the Mishimoto Aluminum Coolant Reservoir Tank is guaranteed to improve the aesthetics of your engine bay.
**** PRICE: USD 75.99
Manufacturer : Mishimoto
SKU: M/AMMRT-CA
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMRT-CA

Start of page
Mishimoto Transmission Fluid Cooler - MMTC-TF-1275


Mishimoto Transmission Fluid Cooler - MMTC-TF-1275
Heating & Cooling>Engine & Transmission Cooling>Auto Trans Oil Cooler
New Product Catalog
Universal application;12 inch x 7.5 inch x 0.75 inch;Efficient, lightweight, tube-and-fin design;3/8 inch push-on fittings;Includes: 5 ft of durable rubber hose, a universal mounting kit, and 4 worm-gear clamps;Mishimoto Lifetime Warranty Keep high fluid temperatures at bay with a Mishimoto Universal Transmission Fluid Cooler! This cooler features a highly efficient 12.0 x 7.5 x 0.75 tube-and-fin core that promotes dramatic temperature drops. Mishimoto universal fluid coolers are applicable for use with transmission fluid, engine oil, power steering fluid, and a variety of other automotive fluids. This ready-to-install kit includes 5' of durable rubber hose, a universal mounting kit, and a four worm-gear clamps for secure connections. The universal mounting kit provides installation flexibility to fit any application. This cooler utilizes 3/8 push-on fittings, perfect for use as a replacement for a damaged factory cooler, or as an upgrade to a vehicle not equipped with a liquid-to-air cooler. As with all their products, this fluid cooler includes the Mishimoto Lifetime Warranty
**** PRICE: USD 55.99
Manufacturer : Mishimoto
SKU: M/AMMTC-TF-1275
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMTC-TF-1275

Start of page
Mishimoto Transmission and Power Steering Cooler Kit - MMTC-U


Mishimoto Transmission and Power Steering Cooler Kit - MMTC-U
Heating & Cooling>Engine & Transmission Cooling>Auto Trans Oil Cooler
New Product Catalog
Universal application;Cools automatic transmissions and power steering units;Includes: cooler, hose, drain connector, plastic ties, foam pads, and o-ring clamps;Lifetime warranty The Mishimoto Universal Transmission Cooler and Power Steering Cooler Kit is used to cool automatic transmissions and power steering units. Some Mishimoto radiators are available only for manual transmission applications. By using the universal transmission cooler, automatic transmission users have the ability to use Mishimoto all-aluminum radiators with their automatic applications. Transmission coolers can also be installed as supplemental cooling units for trucks which undergo a high amount of stress due to towing. Many transmission cooler kits use standard 3/8 push on fittings, although you should check your service manual for your specific application.
**** PRICE: USD 93.99
Manufacturer : Mishimoto
SKU: M/AMMTC-U
UPC:
Tags: truck parts truck accessories Mishimoto, Engine & Transmission Cooling, M/AMMTC-U

Start of page
Kentrol Tailgate Plugs - 70004


Kentrol Tailgate Plugs - 70004
Exterior Parts & Car Care / Fender Flares>Tailgate Parts>Tailgate Accessories
New Product Catalog
07-Current Wrangler JK, 2 & 4 Door;Set of 3 plugs;Plastic Kentrols Tailgate Plug Set for the JK Wrangler, Rubicon and Unlimited includes 3 plugs that can be used to fill the open holes on the tailgate once you remove your spare tire from the back of your JK. These plugs are made from Plastic and each set is inspected for fit, finish, and function. All Kentrol products come with a limited lifetime warranty.
**** PRICE: USD 6.99
Manufacturer : Kentrol
SKU: KEN70004
UPC:
Tags: truck parts truck accessories Kentrol, Tailgate Parts, KEN70004

Start of page
Kentrol Door Hinge Liners - 70005


Kentrol Door Hinge Liners - 70005
Exterior Parts & Car Care / Fender Flares>Doors & Door Accessories>Door Hinge
New Product Catalog
87-06 Wrangler TJ/YJ;76-86 CJ;Black Delrin bushings;Installation tool included Kentrol Delrin Door Hinge Liners are a great replacement for the factory door hinge bushings that deteriorate and fail. Kentrol includes Black Delrin Bushings and an installation tool so you can remove your factory bushings and install your new Kentrol Door Liners.
**** PRICE: USD 29.99
Manufacturer : Kentrol
SKU: KEN70005
UPC:
Tags: truck parts truck accessories Kentrol, Doors & Door Accessories, KEN70005

Start of page
Kentrol Hardtop Quick Release Screws - 70007


Kentrol Hardtop Quick Release Screws - 70007
Tops & Accessories>Jeep Hardtop Accessories>Hardtop Quick Release Kit
New Product Catalog
04-06 Wrangler LJ;Set of 6 Quick Release Screws with washers;Simply unscrew, turn the knobs and release;Made in the USA Don't struggling to remove your hardtop and make the process significantly quicker. We include 6 Quick Release Screws with washers to make the process as easy as possible so that when you want the hardtop off you aren't searching for the correct tool to remove it. Simply unscrew these using the easy to turn knobs and pull your top off. Our Hardtop Quick Release Screws are made in the USA.
**** PRICE: USD 34.99
Manufacturer : Kentrol
SKU: KEN70007
UPC:
Tags: truck parts truck accessories Kentrol, Jeep Hardtop Accessories, KEN70007

Start of page
4WD Gas Tank Strap Kit - 6025


4WD Gas Tank Strap Kit - 6025
Performance Parts>Fuel Tanks & Fuel Tank Hardware>Fuel Tank Strap
New Product Catalog
Includes center strap, passenger strap and driver side strap Must purchase extra strap #5356651 if using kit for a factory plastic 20 gallon gas tank. On 1987-90 YJ Wrangler, the factory top center strap has a plastic piece attached to it. It can be removed and then attached to the new top center strap in this kit.
**** PRICE: USD 42.95
Manufacturer : 4Wheel Drive Hardware
SKU: KIT6025
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Fuel Tanks & Fuel Tank Hardware, KIT6025

Start of page
4WD Cobra CB Radio 75WXST CJ/YJ/TJ PAK - CB75TJPKG


4WD Cobra CB Radio 75WXST CJ/YJ/TJ PAK - CB75TJPKG
Interior>Audio & Video>CB Radios
New Product Catalog
40 CB and 10 weather channels, all controls in Mic, instant channel 9/19, LCD display panel, 4 watts RF power, remote compact size: 3.75 x 7.75 x 5.25 and SoundTracker. A CB radio is a great way to stay in contact with your group on the way to the trail as well as getting valuable information on the trail. Ever been about in the middle of a trailride of 20 to 30 Jeeps and you are wondering what's happening at the front and now the Jeep behind you is lagging behind. Your CB can keep you in contact with the front of the group as well as knowing whether you need to go back to help your buddy that just got hung up on that last rock that you easily traversed. CB radios are required by many organized trailride groups, do not be left out! PAK includes: Cobra 40 Channel CB, 18' Mini Coax, 4' Firestick antenna, Heavy-Duty Antenna Stud Mount and Wrangler/CJ CB antenna mount.
**** PRICE: USD 185.95
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDCB75TJPKG
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Audio & Video, 4WDCB75TJPKG

Start of page
4WD Bottle Koozie - BKOOZIEBLK


4WD Bottle Koozie - BKOOZIEBLK
Apparel, Books & DVDs>Lifestyle & Accessories>Beverage Accessories
New Product Catalog
Fits 12 oz. bottles;Black;100% polyester Keep your drink cold and represent your favorite distributor of Jeep aftermarket parts and accessories at the same time with the 4WD Bottle Koozie!
**** PRICE: USD 5.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDBKOOZIEBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Lifestyle & Accessories, 4WDBKOOZIEBLK

Start of page
4WD ARB Camping Chairs and AOC 24-pack Cooler PAK - CAMPPKG2


4WD ARB Camping Chairs and AOC 24-pack Cooler PAK - CAMPPKG2
Outdoor Lifestyle and Camping>Camping PAKs
New Product Catalog
Includes Two ARB camping chairs and One 24-pak AO canvas cooler;260 lb rating on chairs;Black cooler with removable shoulder strap;Leak proof cooler The Camping PAK includes (2) ARB Camping Chairs and (1) 24-pack AO Canvas Cooler. One of the biggest problems with camping chairs on the market today is that they are built to meet a price point which effectively means they are not built to last. So when ARB started looking for a camp chair, number one on the list of priorities was strength and durability. We looked to individually test many chairs and after several months we found the design that could stand up to the task. For extra strength and added comfort, we specified a chair that had aluminum arm rests and was slightly larger than the standard chairs on the market, but still compact enough to be folded and packed in a carry bag. For extra strength and packability, this chair features locking tabs to keep the chair folded when packed and locked for additional strength when assembled. Satisfied with the strength and durability. ARB is pleased to offer a chair that can stand up to the rigorous demands of our customers. AO Coolers are the best soft-sided coolers in the industry. do not be fooled by imitation coolers made to look like ours. AO Coolers are guaranteed to never leak or sweat because of a high quality liner, the same material used to make waterbeds and above ground pools. The inner insulation is three-quarters thick, high-density, closed cell foam. The combination creates a cooler that will hold ice for 24 hours in 120-degree heat. AO Coolers are guaranteed for life. If it ever leaks they will replace the liner.
**** PRICE: USD 169.97
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDCAMPPKG2
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Outdoor Lifestyle and Camping, 4WDCAMPPKG2

Start of page
4WD Dickies Work Shirt in Black, 2X-Large (Black) - DCK2XBLK


4WD Dickies Work Shirt in Black, 2X-Large (Black) - DCK2XBLK
Apparel, Books & DVDs>Apparel>T-Shirts
New Product Catalog
Whether you are working in the garage, at home or on the trail, these Dickies Work Shirts will stand true to the brands workwear heritage. With our 4WD Hardware logo embroidered above the pocket, this shirt is sure to last. Available in Black and Khaki. Sizes: Medium to XX-Large.
**** PRICE: USD 35.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDDCK2XBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDDCK2XBLK

Start of page
4WD Dickies Work Shirt in Black, 3X-Large - DCK3XBLK


4WD Dickies Work Shirt in Black, 3X-Large - DCK3XBLK
Apparel, Books & DVDs>Apparel>T-Shirts
New Product Catalog
Whether you are working in the garage, at home or on the trail, these Dickies Work Shirts will stand true to the brands workwear heritage. With our 4WD Hardware logo embroidered above the pocket, this shirt is sure to last. Available in Black and Khaki. Sizes: Medium - XXX-Large.
**** PRICE: USD 37.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDDCK3XBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDDCK3XBLK

Start of page
4WD Dickies Work Shirt in Black, Large (Black) - DCKLBLK


4WD Dickies Work Shirt in Black, Large (Black) - DCKLBLK
Apparel, Books & DVDs>Apparel>T-Shirts
New Product Catalog
Whether you are working in the garage, at home or on the trail, these Dickies Work Shirts will stand true to the brands workwear heritage. With our 4WD Hardware logo embroidered above the pocket, this shirt is sure to last. Available in Black and Khaki. Sizes: Medium to XX-Large.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDDCKLBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDDCKLBLK

Start of page
4WD Dickies Work Shirt in Black, Medium (Black) - DCKMBLK


4WD Dickies Work Shirt in Black, Medium (Black) - DCKMBLK
Apparel, Books & DVDs>Apparel>T-Shirts
New Product Catalog
Whether you are working in the garage, at home or on the trail, these Dickies Work Shirts will stand true to the brands workwear heritage. With our 4WD Hardware logo embroidered above the pocket, this shirt is sure to last. Available in Black and Khaki. Sizes: Medium to XX-Large.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDDCKMBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDDCKMBLK

Start of page
4WD Dickies Work Shirt in Black, X-Large (Black) - DCKXLBLK


4WD Dickies Work Shirt in Black, X-Large (Black) - DCKXLBLK
Apparel, Books & DVDs>Apparel>T-Shirts
New Product Catalog
Whether you are working in the garage, at home or on the trail, these Dickies Work Shirts will stand true to the brands workwear heritage. With our 4WD Hardware logo embroidered above the pocket, this shirt is sure to last. Available in Black and Khaki. Sizes: Medium to XX-Large.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDDCKXLBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDDCKXLBLK

Start of page
4WD Cobra CB Radio 19DX Universal PAK - CB19UNVPKG


4WD Cobra CB Radio 19DX Universal PAK - CB19UNVPKG
Interior>Audio & Video>CB Radios
New Product Catalog
Kit includes: CB, 4 foot antenna, antenna mount and 18 foot coaxial cable;Compact remote mount CB;Immediate access to emergency channel 9;Dual watch and full channel scan;4 Memory channels and key lock;External speaker jack Features: 4.5W x 1.75H x 6.5D, 4 watts RF power, digital signal strength meter, instant emergency channel 9, PA switch and electric tuning. A CB radio is a great way to stay in contact with your group on the way to the trail as well as getting valuable information on the trail. Ever been about in the middle of a trail ride of 20 to 30 Jeeps and you're wondering what's happening at the front and now the Jeep behind you is lagging behind. Your CB can keep you in contact with the front of the group as well as knowing whether you need to go back to help your buddy that just got hung up on that last rock that you easily traversed. CB radios are required by many organized trail ride groups, do not be left out! This kit includes everything you need to install it on your vehicle. PAK includes: Cobra 40 Channel CB, 18' Mini Coax, 4' Firestick antenna and a 3 way CB antenna mount.
**** PRICE: USD 95.96
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDCB19UNVPKG
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Audio & Video, 4WDCB19UNVPKG

Start of page
4WD FlexFit Baseball Cap in Black, Large/X-Large - HAT14LXLB


4WD FlexFit Baseball Cap in Black, Large/X-Large - HAT14LXLB
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
Large/X-Large;Black;4WD throwback logo design;FlexFit Represent your favorite distributor of Jeep parts and accessories with this stylish and comfortable hat from 4WD Hardware!
**** PRICE: USD 16.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHAT14LXLB
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHAT14LXLB

Start of page
4WD Flexfit Grille Baseball Hat, Large/X-Large (Black) - HAT17LXL


4WD Flexfit Grille Baseball Hat, Large/X-Large (Black) - HAT17LXL
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
Large/X-Large;Black;Embroidered black grille;4WD logo on back;Flexfit Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell.
**** PRICE: USD 19.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHAT17LXL
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHAT17LXL

Start of page
4WD Cobra CB Radio 75WXST Universal PAK - CB75UNVPKG


4WD Cobra CB Radio 75WXST Universal PAK - CB75UNVPKG
Interior>Audio & Video>CB Radios
New Product Catalog
Kit includes: CB, 4 foot antenna, antenna mount and 18 foot coaxial cable;Compact remote mount CB;10 NOAA Weather channels;Dual watch and full channel scan;4 Memory channels and key lock;External speaker jack;LCD Display with signal strength and power output meter Features: 40 CB and 10 weather channels, all controls in Mic, instant channel 9/19, LCD display panel, 4 watts RF power, remote compact size: 3.75 x 7.75 x 5.25 and SoundTracker. A CB radio is a great way to stay in contact with your group on the way to the trail as well as getting valuable information on the trail. Ever been about in the middle of a trailride of 20 to 30 Jeeps and you are wondering what's happening at the front and now the Jeep behind you is lagging behind. Your CB can keep you in contact with the front of the group as well as knowing whether you need to go back to help your buddy that just got hung up on that last rock that you easily traversed. CB radios are required by many organized trailride groups, do not be left out! This kit includes everything you need to install it on your vehicle. PAK includes: Cobra 40 Channel CB, 18' Mini Coax, 4' Firestick antenna and a 3 way CB antenna mount.
**** PRICE: USD 167.96
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDCB75UNVPKG
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Audio & Video, 4WDCB75UNVPKG

Start of page
4WD Cup Wrap - CWRAPBLK


4WD Cup Wrap - CWRAPBLK
Apparel, Books & DVDs>Lifestyle & Accessories>Beverage Accessories
New Product Catalog
Fits coffee cups, stadium cups and red Solo cups;Black;100% polyester Keep your drink cold and represent your favorite distributor of Jeep aftermarket parts and accessories at the same time with the 4WD Cup Wrap!
**** PRICE: USD 4.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDCWRAPBLK
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Lifestyle & Accessories, 4WDCWRAPBLK

Start of page
4WD FlexFit Baseball Cap in Black, XLarge/XX-Large - HAT14XLXXLB


4WD FlexFit Baseball Cap in Black, XLarge/XX-Large - HAT14XLXXLB
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
X-Large/XX-Large;Black;4WD throwback logo design;FlexFit Represent your favorite distributor of Jeep parts and accessories with this stylish and comfortable hat from 4WD Hardware!
**** PRICE: USD 16.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHAT14XLXXLB
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHAT14XLXXLB

Start of page
4WD Flexfit Grille Baseball Hat, X-Large/XX-Large (Black) - HAT17XLXXL


4WD Flexfit Grille Baseball Hat, X-Large/XX-Large (Black) - HAT17XLXXL
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
X-Large/XX-Large;Black;Embroidered black grille;4WD logo on back;Flexfit Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell.
**** PRICE: USD 19.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHAT17XLXXL
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHAT17XLXXL

Start of page
4WD Flexfit Flag Grille Baseball Hat, X-Large/XX-Large (Blue) - HATUSAXLXXL


4WD Flexfit Flag Grille Baseball Hat, X-Large/XX-Large (Blue) - HATUSAXLXXL
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
X-Large/XX-Large;Navy blue;Embroidered flag grille;4WD logo on back;Flexfit Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell.
**** PRICE: USD 19.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHATUSAXLXXL
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHATUSAXLXXL

Start of page
4WD Pullover Hoodie - HOOD2X


4WD Pullover Hoodie - HOOD2X
Apparel, Books & DVDs>Apparel>Jackets & Hooded Sweatshirts
New Product Catalog
Heavyweight cotton/poly blend and is all double needle stitched. This pullover sweatshirt has a fleece lining with front pouch pocket.
**** PRICE: USD 35.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHOOD2X
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHOOD2X

Start of page
4WD Flexfit Flag Grille Baseball Hat, Large/X-Large (Blue) - HATUSALXL


4WD Flexfit Flag Grille Baseball Hat, Large/X-Large (Blue) - HATUSALXL
Apparel, Books & DVDs>Apparel>Hats, Caps and Beanies
New Product Catalog
Large/X-Large;Navy blue;Embroidered flag grille;4WD logo on back;Flexfit Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell.
**** PRICE: USD 19.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHATUSALXL
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHATUSALXL

Start of page
4WD Jack Base and Handle Kit - HL484KIT


4WD Jack Base and Handle Kit - HL484KIT
Winches and Trail Accessories>Trail Jacks & Vehicle Recovery Equipment>Trail Jacks
New Product Catalog
Kit includes the original 48 inch Hi-Lift Jack, off-road base and Hi-Lift handle keeper in black The Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated lifting capacity of 2 1/3 tons (2114.74kg). Specifications: Approximate weight: 30lbs (14 kg) 4,660 lbs (2113.74 kg) rated capacity. Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield. Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82. Steel handle of 14 gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16 diameter x 30 long. This kit includes the 48 hi-Lift Jack, off-road base and a black hi-lift handle keeper.
**** PRICE: USD 140.45
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHL484KIT
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Trail Jacks & Vehicle Recovery Equipment, 4WDHL484KIT

Start of page
4WD Pullover Hoodie - HOODL


4WD Pullover Hoodie - HOODL
Apparel, Books & DVDs>Apparel>Jackets & Hooded Sweatshirts
New Product Catalog
Heavyweight cotton/poly blend and is all double needle stitched. This pullover sweatshirt has a fleece lining with front pouch pocket.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHOODL
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHOODL

Start of page
4WD Jack Base and Handle Kit - HL484KITR


4WD Jack Base and Handle Kit - HL484KITR
Winches and Trail Accessories>Trail Jacks & Vehicle Recovery Equipment>Trail Jacks
New Product Catalog
Kit includes the original 48 inch Hi-Lift Jack, off-road base and Hi-Lift handle keeper in red The Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated lifting capacity of 2 1/3 tons (2114.74kg). Specifications: Approximate weight: 30lbs (14 kg) 4,660 lbs (2113.74 kg) rated capacity. Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield. Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82. Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16 diameter x 30 long. This kit includes the 48 hi-Lift Jack, off-road base and a black hi-lift handle keeper. Buy purchasing this kit, you are saving 15% off the cost of purchasing each item individually.
**** PRICE: USD 140.45
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHL484KITR
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Trail Jacks & Vehicle Recovery Equipment, 4WDHL484KITR

Start of page
4WD Pullover Hoodie - HOODM


4WD Pullover Hoodie - HOODM
Apparel, Books & DVDs>Apparel>Jackets & Hooded Sweatshirts
New Product Catalog
Heavyweight cotton/poly blend and is all double needle stitched. This pullover sweatshirt has a fleece lining with front pouch pocket.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHOODM
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHOODM

Start of page
4WD Shifter Knobs and E-Brake Cover PAK (Billet Aluminum) - JP-181109JKAPKG1


4WD Shifter Knobs and E-Brake Cover PAK (Billet Aluminum) - JP-181109JKAPKG1
Interior>Interior Accessories>Auto Trans Shift Lever Knob
New Product Catalog
11-Current Wrangler JK, 2 & 4 Door;With automatic transmission;6061-T6 billet aluminum;Includes silver E-Brake Cover Add a touch of style to the inside of your Jeep with this custom shifter knobs and e-brake package from Drake Off Road. The kit includes Automatic Transmission Shifter Knob, 4WD Shifter Knob and Silver E-Brake Handle Cover.
**** PRICE: USD 94.97
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDJP-181109JKAPKG1
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Interior Accessories, 4WDJP-181109JKAPKG1

Start of page
4WD Pullover Hoodie - HOODS


4WD Pullover Hoodie - HOODS
Apparel, Books & DVDs>Apparel>Jackets & Hooded Sweatshirts
New Product Catalog
Heavyweight cotton/poly blend and is all double needle stitched. This pullover sweatshirt has a fleece lining with front pouch pocket.
**** PRICE: USD 32.99
Manufacturer : 4Wheel Drive Hardware
SKU: 4WDHOODS
UPC:
Tags: truck parts truck accessories 4Wheel Drive Hardware, Apparel, 4WDHOODS

Start of page
Artec Inner Frame Bracket - BR1017


Artec Inner Frame Bracket - BR1017
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front passenger or rear driver;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;10 degree angle;Bare steel With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Made from 1/4 thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
**** PRICE: USD 32.99
Manufacturer : Artec Industries
SKU: A/IBR1017
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1017

Start of page
Artec Inner Frame Bracket - BR1016


Artec Inner Frame Bracket - BR1016
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front driver or rear passenger;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;10 degree angle;Bare steel With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Made from 1/4 thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
**** PRICE: USD 32.99
Manufacturer : Artec Industries
SKU: A/IBR1016
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1016

Start of page
Artec Dana 60 Lower Link Axle Brackets - BR1022


Artec Dana 60 Lower Link Axle Brackets - BR1022
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Ford drivers side;Made from 1/4 inch thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold As A Pair;10 degree angle from 90 degrees;Bare steel;Joints sold separately Have a Dana 60 with a really short axle tube length? Trying to us a big joint on your lowers but it will not fit? These lower link axle brackets are specifically made for Ford Dana 60s that have only 3 inches of axle tube on one side. These brackets will accept 2.625 inch mounting width with 9/16 inch bolt hole joints.
**** PRICE: USD 54.99
Manufacturer : Artec Industries
SKU: A/IBR1022
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1022

Start of page
Artec Inner Frame Bracket - BR1019


Artec Inner Frame Bracket - BR1019
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front passenger or rear driver;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;25 degree angle;Bare steel With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Made from 1/4 thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
**** PRICE: USD 32.99
Manufacturer : Artec Industries
SKU: A/IBR1019
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1019

Start of page
Artec Dana 60 Lower Link Axle Brackets - BR1023


Artec Dana 60 Lower Link Axle Brackets - BR1023
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Dodge drivers side;Made from 1/4 inch thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold As A Pair;10 degree angle from 90 degrees;Bare steel;Joints sold separately Have a Dana 60 with a really short axle tube length? Trying to us a big joint on your lowers but it will not fit? These lower link axle brackets are specifically made for Dodge Dana 60s that have only 3 inches of axle tube on one side. These brackets will accept 2.625 inch mounting width with 9/16 inch bolt hole joints.
**** PRICE: USD 54.99
Manufacturer : Artec Industries
SKU: A/IBR1023
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1023

Start of page
Artec Inner Frame Bracket - BR1018


Artec Inner Frame Bracket - BR1018
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front driver or rear passenger;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;25 degree angle;Bare steel With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Made from 1/4 thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
**** PRICE: USD 32.99
Manufacturer : Artec Industries
SKU: A/IBR1018
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1018

Start of page
Artec Adjustable Panhard Mount for D60 Truss - BR1024


Artec Adjustable Panhard Mount for D60 Truss - BR1024
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Truss
New Product Catalog
For use with Artec Truss;1.75 inch joint mounting width;Offers 3 different adjustable panhard mounting locations;Bare steel This panhard mount is for use with Artecs truss systems for Dana 60 axles in any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offers three holes at 7, 8, and 9 inches from axle centerline to allow you to fine tune your suspension. Designed for 1978 to 1979 Chevy and Ford Dana 60 axles with Artec truss. Welding required for installation.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IBR1024
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1024

Start of page
Artec Adjustable Panhard Mount for D60 Truss - BR1025


Artec Adjustable Panhard Mount for D60 Truss - BR1025
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Truss
New Product Catalog
For use with Artec Truss;1.75 inch joint mounting width;Offers 3 different adjustable panhard mounting locations;Bare steel This panhard mount is for use with Artecs truss systems for Dana 60 axles in any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offers three holes at 7, 8, and 9 inches from axle centerline to allow you to fine tune your suspension. Designed for 1985 to 1991.5 Ford 60 axles with Artec truss. Welding required for installation.
**** PRICE: USD 54.99
Manufacturer : Artec Industries
SKU: A/IBR1025
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1025

Start of page
Artec Adjustable Frame Panhard Mount - BR1028


Artec Adjustable Frame Panhard Mount - BR1028
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Outside of frame;Made for 2.625 inch mounting width joints;Offers 3 different holes for adjustment;Bare steel This panhard mount is for use with any 3-link or 4-link scenario. Designed for joints that have a 2.625 mounting width such as bushings and cartridge joints. It offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.
**** PRICE: USD 43.99
Manufacturer : Artec Industries
SKU: A/IBR1028
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1028

Start of page
Artec Adjustable Panhard Mount for Axle - BR1032


Artec Adjustable Panhard Mount for Axle - BR1032
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Designed for 3 inch axle tube diameters;Offset to leading edge;Made for 1.75 inch mounting width joints;Offers 3 different holes for adjustment This panhard mount is for use with any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offer three holes at 5, 6, and 7 inches from axle centerline to allow you to fine tune your suspension. Choose your desired orientation: centered on axle or offset to the front edge of the axle. For 3.0 axle tube diameter but can be trimmed to fit.
**** PRICE: USD 43.99
Manufacturer : Artec Industries
SKU: A/IBR1032
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1032

Start of page
Artec Adjustable Panhard Mount for D60 Truss - BR1026


Artec Adjustable Panhard Mount for D60 Truss - BR1026
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Truss
New Product Catalog
For use with Artec Truss;1.75 inch joint mounting width;Offers 3 different adjustable panhard mounting locations;Bare steel This panhard mount is for use with Artecs truss systems for Dana 60 axles in any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offers three holes at 7, 8, and 9 inches from axle centerline to allow you to fine tune your suspension. Designed for Dodge Dana 60 axles with Artec truss. Welding required for installation.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IBR1026
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1026

Start of page
Artec Adjustable Frame Panhard Mount - BR1029


Artec Adjustable Frame Panhard Mount - BR1029
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Inside of frame;Made for 1.75 inch mounting width joints;Offers 3 different holes for adjustment;Bare steel This panhard mount is for use with any 3-link or 4-link scenario. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.
**** PRICE: USD 38.99
Manufacturer : Artec Industries
SKU: A/IBR1029
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1029

Start of page
Artec Rear Coil Perches and Retainers - BR1033


Artec Rear Coil Perches and Retainers - BR1033
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Made from 1/4 inch steel;Clockable to any angle;Includes spring retainers;Sold As A Pair The perfect compliment to your axle swap with Artec Modular Truss in the back of a TJ Wrangler. Precisely locates rear coil springs in factory location for an easy, measure-free swap when used with Artec Modular Trusses. Includes bottom perches, tubing spacers, flat tube caps, spring retainers, and 1/2 retainer hardware for both sides of the axle. For off-road use only.
**** PRICE: USD 72.99
Manufacturer : Artec Industries
SKU: A/IBR1033
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1033

Start of page
Artec Adjustable Frame Panhard Mount - BR1027


Artec Adjustable Frame Panhard Mount - BR1027
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Outside of frame;Made for 1.75 inch mounting width joints;Offers 3 different holes for adjustment;Bare steel This panhard mount is for use with any 3-link or 4-link scenario. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.
**** PRICE: USD 38.99
Manufacturer : Artec Industries
SKU: A/IBR1027
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1027

Start of page
Artec Adjustable Panhard Mount for Axle - BR1031


Artec Adjustable Panhard Mount for Axle - BR1031
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Designed for 3 inch axle tube diameters;Centered on tube;Made for 1.75 inch mounting width joints;Offers 3 different holes for adjustment This panhard mount is for use with any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. It offer three holes at 5, 6, and 7 inches from axle centerline to allow you to fine tune your suspension. Choose your desired orientation: centered on axle or offset to the front edge of the axle. For 3.0 axle tube diameter but can be trimmed to fit.
**** PRICE: USD 38.99
Manufacturer : Artec Industries
SKU: A/IBR1031
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1031

Start of page
Artec Leaf Spring Perch & Plates - BR1034


Artec Leaf Spring Perch & Plates - BR1034
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Housing Gusset
New Product Catalog
Designed for 3.25 inch to 3.75 inch axle tubes;Made from 3/8 inch thick steel;Hardware is not included;Sold As A Pair;Bare steel The perfect complement to your Spring Over Axle (SOA) swap and Artec Modular Truss. Eliminates U-bolts to increase strength by spreading load to 4 bolts rather than 2. Includes truss end caps for seamless transition between Artec Modular Trusses. Three leaf pin positions for one inch adjustments forward or back. 3/8 thick top plates and perches, and 1/4 gussets Variable axle tube diameter; just grind off little tabs for larger tube diameter, current notch fits 3.25-3.375 axle tubes. Hardware not included since leaf packs can vary in thickness. Grade 8 hardware and Nylon locking nuts recommended. For off-road use only.
**** PRICE: USD 154.99
Manufacturer : Artec Industries
SKU: A/IBR1034
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1034

Start of page
Artec Adjustable Inner Frame Bracket - BR1035


Artec Adjustable Inner Frame Bracket - BR1035
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front driver or rear passenger;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;0 degree angle;Bare steel The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. One inch of separation between each hole for adjustability and floating top gusset allows any height frame. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Can be easily modified for smaller joints. Grease fitting access on top to allow easy maintenance of your most abused joint. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
**** PRICE: USD 54.99
Manufacturer : Artec Industries
SKU: A/IBR1035
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1035

Start of page
Artec Adjustable Inner Frame Bracket - BR1039


Artec Adjustable Inner Frame Bracket - BR1039
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Front driver or rear passenger;Made from 1/4 thick boxed steel;9/16 inch bolt hole;Skid plate for joint;Sold individually;25 degree angle;Bare steel The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. One inch of separation between each hole for adjustability and floating top gusset allows any height frame. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25 rod ends with spacers. Can be easily modified for smaller joints. Grease fitting access on top to allow easy maintenance of your most abused joint. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
**** PRICE: USD 54.99
Manufacturer : Artec Industries
SKU: A/IBR1039
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1039

Start of page
Artec Adjustable Frame Panhard Mount - BR1030


Artec Adjustable Frame Panhard Mount - BR1030
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
Universal application;Inside of frame;Made for 2.625 inch mounting width joints;Offers 3 different holes for adjustment;Bare steel This panhard mount is for use with any 3-link or 4-link scenario. Designed for joints that have a 2.625 mounting width such as bushings and cartridge joints. It offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.
**** PRICE: USD 43.99
Manufacturer : Artec Industries
SKU: A/IBR1030
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IBR1030

Start of page
Artec Ultimate Dana 60 High Steer Arms - HS6020


Artec Ultimate Dana 60 High Steer Arms - HS6020
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless designCNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk Sold as a pair Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. Knuckle and bolt kit are sold separately. Image is for illustrative purposes only.
**** PRICE: USD 329.99
Manufacturer : Artec Industries
SKU: A/IHS6020
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6020

Start of page
Artec Industries Kingpin Springless Conversion Cap Assembly - HS6024


Artec Industries Kingpin Springless Conversion Cap Assembly - HS6024
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
CNC Laser cut and machined from 3/4 inch thick steel;Springless design eliminates slop caused by preloaded spring;Springless hardware included;Grease zerk fitting for kingpin lubrication;4 bolt holes for use with OEM or Reid Racing Knuckles;1/2 inch fine thread Grade 8 bolts included Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate offroad abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm.
**** PRICE: USD 64.99
Manufacturer : Artec Industries
SKU: A/IHS6024
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6024

Start of page
Artec Ultimate Dana 60 High Steer Arm - HS6010P


Artec Ultimate Dana 60 High Steer Arm - HS6010P
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Passenger side only;Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless designCNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk Sold individually Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. Knuckle and bolt kit are sold separately. Image is for illustrative purposes only.
**** PRICE: USD 164.99
Manufacturer : Artec Industries
SKU: A/IHS6010P
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6010P

Start of page
Artec Ultimate Dana 60 High Steer Arms - HS6026


Artec Ultimate Dana 60 High Steer Arms - HS6026
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless design;CNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk Sold as a pair Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. NOTE FOR SOLID AXLE KNUCKLES: Solid Axle Industries recommends using grade 8 bolts instead of studs for mounting the high steer arms. Studs will work for the standard 4 holes but will not seat correctly in the 5th and 6th holes since they are in the keyway and machined higher than the rest. The 6-bolt versions of our arms are not countersunk for these holes since it is recommended to use bolts rather than studs. You can still use studs and tapered nuts for the 4 main holes but you'll need to countersink the holes on the arms.
**** PRICE: USD 409.99
Manufacturer : Artec Industries
SKU: A/IHS6026
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6026

Start of page
Artec Industries Tube Armor (30 inches) - GU4020


Artec Industries Tube Armor (30 inches) - GU4020
Fabrication & Tools>Flex Joints, Rod Ends & Jam Nuts>Heim Joint
New Product Catalog
CNC Laser cut and CNC bent from 3/16 inch mild steel;70 degree bend fits tubing from 1.5 inch OD up;Plate Steel Bend actually adds strength to your tubing making is less susceptible to bending;Tube armor takes most of the physical abuse and can be replaced by simply cutting off and welding on a new one...no need to replace entire tube;Trimmable to any needed length. Cut one piece in half for shorter lengths;Shipped in raw steel;Ships as a single piece;Perfect addition to our Easy Link Kits or Steering Kits Want to beef up a section of tubing, whether it's lower links, tie rod, sliders or a section of cage, without adding a lot of weight? Artec Tube Armor is the answer. A 30 inch section only adds about 2 lbs to your tube. Contrast that to using a full length of thicker tube and you not only save weight but money since thicker tubing is significantly higher. Plus it generally means easier packaging than thicker tube since you don't have to worry about the added girth. This tube reinforcement is a great way to add protection exactly where it's needed.
**** PRICE: USD 15.99
Manufacturer : Artec Industries
SKU: A/IGU4020
UPC:
Tags: truck parts truck accessories Artec Industries, Flex Joints, Rod Ends & Jam Nuts, A/IGU4020

Start of page
Artec 5 Inch Speed Gussets - GU5002


Artec 5 Inch Speed Gussets - GU5002
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Housing Gusset
New Product Catalog
Cut from 1/4 inch steel;Bare steel;Includes 6 gussets Six 5 Speed Gussets cut from 1/4 steel plate tumble finished and ready to weld. Buy in bulk and save.
**** PRICE: USD 31.99
Manufacturer : Artec Industries
SKU: A/IGU5002
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IGU5002

Start of page
Artec Battery Mount Mounting Kit (Bare Steel) - HK1008


Artec Battery Mount Mounting Kit (Bare Steel) - HK1008
Electrical>Battery & Battery Accessories>Battery Tray
New Product Catalog
8 bolt kit;Includes all necessary hardware Includes 8 bolts, 8 locking nuts and 8 washers.
**** PRICE: USD 5.99
Manufacturer : Artec Industries
SKU: A/IHK1008
UPC:
Tags: truck parts truck accessories Artec Industries, Battery & Battery Accessories, A/IHK1008

Start of page
Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6030P


Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6030P
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Passenger side;Fits 5 hole OEM and Reid Dana 60 knuckles;Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless designCNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk fitting for kingpin lubrication;Sold individually Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. Image is for illustrative purposes, you will receive a 5 bolt high steer arm.
**** PRICE: USD 289.99
Manufacturer : Artec Industries
SKU: A/IHS6030P
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6030P

Start of page
Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6030D


Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6030D
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Driver side;Fits 5 hole OEM and Reid Dana 60 knuckles;Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless designCNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk fitting for kingpin lubrication;Sold individually Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. Image is for illustrative purposes, you will receive a 5 bolt high steer arm.
**** PRICE: USD 289.99
Manufacturer : Artec Industries
SKU: A/IHS6030D
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6030D

Start of page
Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6031D


Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6031D
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Driver side;Fits 6 hole with Keyway Solid Axle knuckles;Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless design;CNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk fitting for kingpin lubrication;Sold individually Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. NOTE FOR SOLID AXLE KNUCKLES: Solid Axle Industries recommends using grade 8 bolts instead of studs for mounting the high steer arms. Studs will work for the standard 4 holes but will not seat correctly in the 5th and 6th holes since they are in the keyway and machined higher than the rest. The 6-bolt versions of our arms are not countersunk for these holes since it is recommended to use bolts rather than studs. You can still use studs and tapered nuts for the 4 main holes but you'll need to countersink the holes on the arms.
**** PRICE: USD 309.99
Manufacturer : Artec Industries
SKU: A/IHS6031D
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6031D

Start of page
Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6031P


Artec Ultimate Dana 60 Double Ended High Steer Arm - HS6031P
Brakes & Steering>Performance Steering Upgrades>Steering Arm
New Product Catalog
Passenger side;Fits 6 hole with Keyway Solid Axle knuckles;Clear zinc plated;Machined black to allow customizable tie rod location;Proper 9 degree angle to compensate for knuckle kingpin inclination;Springless design;CNC machined from 1.25 inch thick 1018 cold rolled steel;Grease zerk fitting for kingpin lubrication;Sold individually Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and give you options as well! Paired with our optional Knuckle Bolt Kit (sold separately), the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a springless conversion is included and consists of a 3/4 set screw, jam nut, grease zerk, .250 thick load washer, and upper kingpin bushing for each arm. Studs and nuts are NOT INCLUDED and are available for purchase separately. Please Note: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 17, 4.75 backspaced wheels. Will NOT work with factory backspaced H1 wheels. The bulge on the side of the arm measures 1.25 from the spindle mounting surface. Please confirm you have adequate space between arms and wheels/tires before purchasing. NOTE FOR SOLID AXLE KNUCKLES: Solid Axle Industries recommends using grade 8 bolts instead of studs for mounting the high steer arms. Studs will work for the standard 4 holes but will not seat correctly in the 5th and 6th holes since they are in the keyway and machined higher than the rest. The 6-bolt versions of our arms are not countersunk for these holes since it is recommended to use bolts rather than studs. You can still use studs and tapered nuts for the 4 main holes but you'll need to countersink the holes on the arms.
**** PRICE: USD 309.99
Manufacturer : Artec Industries
SKU: A/IHS6031P
UPC:
Tags: truck parts truck accessories Artec Industries, Performance Steering Upgrades, A/IHS6031P

Start of page
Artec Heavy Duty Raised Tracbar Bracket - JK4406


Artec Heavy Duty Raised Tracbar Bracket - JK4406
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;For use with drag link flip kit and a minimum of 4 inch lift;Made from 1/4 inch mild steel;Lifts factory sway bar mount 1.75 inch;Adjusts roll center 3 inch higher for stability;Bare steel This heavy bracket is designed to take serious abuse and replace your front Dana 30 or Dana 44 JK factory tracbar bracket. The 1/4 thick precision cut and formed components of this setup outperform the competition. NOTE: This bracket offers raised tracbar holes at 1.75 and 3.0. This bracket is for use with a drag link flip (which requires a minimum 3 inch lift and bumpstop extensions.) This bracket has nothing to do with your lift amount. If your lift replaces your tracbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable tracbar), choose the factory height bracket #A/IJK4407. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IJK4406
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4406

Start of page
Artec JK Front Axle Armor Kit - JK4411


Artec JK Front Axle Armor Kit - JK4411
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;With Dana 44 front axle;Includes factory height tracbar bracket;Made from 1/4 inch mild steel;Bare steel This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4 thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Kit includes: front axle truss, front lower control arm skids, inner c gussets and heavy duty stock height tracbar bracket. Please note: If your lift replaces your tracbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable tracbar), choose the factory height bracket. If you are doing a Drag link flip (which requires a minimum 3 lift and bumpstop extensions), choose the raised height bracket kit #A/IJK4410. This kit requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
**** PRICE: USD 299.99
Manufacturer : Artec Industries
SKU: A/IJK4411
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4411

Start of page
Artec Inner C Gussets - JK4405


Artec Inner C Gussets - JK4405
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Housing Gusset
New Product Catalog
07-Current Wrangler JK, 2 & 4 Door;Works on Dana 30 or Dana 44 axle;Made from 1/4 mild steel;Precision fit around axle inner C;Provides valuable reinforcement to a notoriously weak area;Sold as a pair These heavy duty skids are designed to take serious abuse and reinforce your front Dana 30 or Dana 44 JK Inner Cs. The 1/4 thick precision cut and formed components of this setup outperform the competition. Please note this requires welding and general fabrication.
**** PRICE: USD 69.99
Manufacturer : Artec Industries
SKU: A/IJK4405
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4405

Start of page
Artec Heavy Duty Stock Tracbar Bracket - JK4407


Artec Heavy Duty Stock Tracbar Bracket - JK4407
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;Maintains factory sway bar mount location;Made from 1/4 inch mild steel;Stock tracbar upgrade;Bare steel This heavy bracket is designed to take serious abuse and replace your front Dana 30 or Dana 44 JK factory tracbar bracket. The 1/4 thick precision cut and formed components of this setup outperform the competition. NOTE: If your lift replaces your tracbar and mounts to the factory axle bracket (typical with an lift that includes an adjustable tracbar), choose this bracket. If you are doing a drag link flip (minimum 3.0 lift needed for flip), choose #A/IJK4406. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IJK4407
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4407

Start of page
Artec Lower Control Arm Brackets - JK4412


Artec Lower Control Arm Brackets - JK4412
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;1/4 inch thick boxed steel plate;2.625 inch mounting width Grease Sold as a pair Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IJK4412
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4412

Start of page
Artec Rear Upper Control Arm Brackets - JK4424


Artec Rear Upper Control Arm Brackets - JK4424
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;Factory 2.4 inch mounting width;Wraps around axle tube more than stock;1/4 inch steel boxed plate;Grease Sold as a pair;Welding required Do you have bent and mangled factory upper control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IJK4424
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4424

Start of page
Artec JK Rear Tracbar Bracket - JK4426


Artec JK Rear Tracbar Bracket - JK4426
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Brackets
New Product Catalog
2 and 4-door models;Made from 1/4 inch mild steel;Replaces factory bracket for those with 2.0 inch lift or higher;Adjusts roll center higher for greater stability;Bare steel This heavy bracket is designed to take serious abuse and replace your worn JK factory rear tracbar bracket. The 1/4 thick precision cut and formed components of this setup out perform the competition. Note: This bracket offers several raised tracbar holes. Every lift is different and some trial and error may be necessary to find the ideal ride. This bracket is NOT bolt on and requires welding to install.
**** PRICE: USD 49.99
Manufacturer : Artec Industries
SKU: A/IJK4426
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK4426

Start of page
Artec JK 1 Ton - Front Dana 60 Swap Kit with Daystar Bushings - JK6011


Artec JK 1 Ton - Front Dana 60 Swap Kit with Daystar Bushings - JK6011
Fabrication & Tools>Brackets, Gussets & Tabs>Axle Truss
New Product Catalog
07-Current Wrangler JK, 2 & 4 Door;All the brackets necessary to swap front Dana 60 axle into JK;1/4 thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets;Precision CNC cut and bent for great fitment;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts;Save hours of installation time. Brackets are jigged into truss and set exact position automatically;Tracbar mount includes 4 locations for those who have aftermarket lifts;Easily upgradeable for future link geometry changes;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly Artec Industries is excited to announce the JK ONE TON Axle Swap Kit for front Dana 60 axles. This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, spring, anti-sway bar, and shock locations. The 1/4 thick truss incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Front Dana 60 that works with this kit is from Ford 3/4 and 1 ton trucks from model years 85-91.5 (Kingpin) and 92-97 (Ball joint). This truss is not intended for older axles due to different differential offsets or newer Superduty axles (kit currently in R&D). The easiest way to identify if the axle will work with this kit is if the axle has 3.0 of driver side axle tube and 24.5 of passenger side axle tube. Please ensure it is a Dana 60 because these model years also had Dana 44 available. Due to the larger casting on the Dana 60 differential, the Lower Control Arm (LCA) brackets are wider than factory location. Modifications to your Lower Control Arms will likely be necessary. If you have adjustable arms with flexible style joints (heims, Johnny Joints, etc.), modifications may not be necessary. Upper Control Arm (UCA) brackets are also slightly higher than factory so adjustable arms may be necessary. Dana 60 axles DO NOT MATCH the factory JK 5 lug wheel bolt pattern. New wheels will need to be purchased to do this swap. Brake and Steering components NOT INCLUDED in this product, but will be available soon. This will likely require bumpstop extensions and a new tracbar since the steering is different on this axle from factory axle. The tracbar bracket is higher t
**** PRICE: USD 414.99
Manufacturer : Artec Industries
SKU: A/IJK6011
UPC:
Tags: truck parts truck accessories Artec Industries, Brackets, Gussets & Tabs, A/IJK6011

Start of page

 

 

 


www.sapiensman.com


Work from the comfort of your home. Earn money worldwide (in over 190 countries). Grow a second income™.  Buy (Products from over 160 countries). Sell (Sell a single item or create your own store) . Bid ( Penny auctions). Play ( Online games).