|
#2, Phillips Bit Socket
$14.95
Hex Size: Phillips #2 Hez Shank (inch.): 1/4'' Length (inch): 1.69 By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
#3, Phillips Bit Socket
$14.95
Hex Size: Phillips #3 Hez Shank (inch.): 1/4'' Length (inch): 1.69 By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
''Anywhere'' Cordless Led Light
$61.95
? Includes belt pouch attachment for instant access! ? 18 Super Bright 100, 000 hour Floodlight style LED's. ? Extremely durable ? Ratcheting hinge for different positions. ? Close and play ? 7 hour cordless use between charging ? Rugged hook offers stationary positioning and easily stores in light housing. ? Rechargeable battery charges in only 4 hours!By EZ-Red. [Read more]
Store: AutoBarn.com
|
''Inspector'' 2 In 1 Electronic/Uv Leak Detector
$224.95
? Perform Electronic and UV Leak Detection all with one tool. ? Pin-point leaks as small as 1/10 oz (3 gr) per year. ? Six levels of sensitivity (15 levels of detection) with a tri-colored LED indicator. ? The ultra bright UV light is built into the end of the probe, allowing easy access into tight areas. ? Incorporating both electronic and UV technology into one unit insures that even the toughest leaks can be found.By Mastercool. [Read more]
Store: AutoBarn.com
|
|
''Monster'' Swivel Magnet
$42.95
? Exclusive 360 degree, locking swivel magnet. ? Telescopes from 22 to 38 inches. ? Neodymium rare earth magnet. ? Lift up to 10 lbs. horizontally or vertically. ? Removes broken axle pieces. ? Will start bolts in hard to reach places. ? Weight: 7 oz.By EZ-Red. [Read more]
Store: AutoBarn.com
|
''Quick-Off'' Damaged Lugnut Remover
$31.95
? Reversible socket for removal of late model OEM and aftermarket 3/4'', 19mm, 13/16'' and 21mm lugnuts that are damaged/rounded. ? The LT 4200A has a fluted design which gives the socket a tight grip to remove the most difficult lugnuts from the wheel and easy removal of the lugnut from the socket ? Works with a 1/2'' impact gun or breaker barBy Lock Technology. [Read more]
Store: AutoBarn.com
|
''Rigiflex'' Hose Clamp Pliers - Cable Operated
$113.95
Pre-set and pre-position cable and jaws for reaching the most difficult to get at hose clamps. ? Positionable, ''obedient'', flex cable can be bent into shape for reaching around objects. ? Ratcheting mechanism allows preseting jaw position as well as improved control over jaws duing hose clamp removal and installation operations.By Mayhew Tools. [Read more]
Store: AutoBarn.com
|
''S'' Gearwrench - 4 Piece Fractional Set
$125.95
? Reversible levers on both ends to allow for direction changes from either side. ? Elimnates the problem of reaching around many obstructions. ? Two double reversing 5 degree ratchet action heads - Only requires 5 degrees to turn the fastener. ? Comes in a molded tray. ? Lifetime warranty. ? 4 Piece set includes: (3/8? x 7/16?); (1/2? x 9/16?); (5/8? x 11/16?); (3/4? x 7/8?)By K-D Tools. [Read more]
Store: AutoBarn.com
|
|
''T'' Coupler Body Air Fitting 1/4'' Male Npt
$8.95
1/4'' basic size Flows 60cfm @ 100psi By Milton. [Read more]
Store: AutoBarn.com
|
''T'' Plug (2Pk) Air Fitting 1/4'' Female Npt
$3.65
1/4'' basic size Flows 60cfm @ 100psi By Milton. [Read more]
Store: AutoBarn.com
|
''Tc'' Torque Comparator
$315.95
? ''TC'' torque comparator is calibrated on torque testers which are certified using text bars and class ''F'' weights traceable to NIST. ? Meets or exceeds GGG-W-686C and ANSI B107. 14M. ? Perfect for a facility where a quick check of a wrench is required before usage. ? Excellent for tool trucks to verify wrench accuracy and avoid unnecessary service. ? Highly accurate from 20% of full scale to full scale. ? 1/2'' male square drive, 1/2'' female square drive adaptor included. ? Large 175 lb.-ft. scale dial with increments every 5 lb.-ft for easy torque reading. ? Compact design allows for horizontal or vertical mounting. ? No power requirements. By Precision Instruments. [Read more]
Store: AutoBarn.com
|
''The Strutter'' Macpherson Strut Coil Spring Tool
$57.95
Every shop, no matter how small, can do work on the Mac Pherson Strut assembly found on virtually all modern domestic and imported vehicles. The S & G 62900 ''Strutter'' can be: ? Used with impact wrench or hand tool. ? Used ON or OFF the car! ? Sells for a fraction of other types. Each set contains complete instructions and a safety kit. The one piece cold headed bolts are made of chromiumolybdenum alloy steel. The nuts are Grade 5. Do not use on General Motors ''A'', ''C'', ''J'' or ''X'' Body cars. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6'' or a wire diameter larger than 5/8''.By Tool Aid. [Read more]
Store: AutoBarn.com
|
|
'Fear This' Holographic Decal (6'' x 23'')
$5.99
Easy to apply holographic decal, by Chroma. Aproximately 6'' X 23''. [Read more]
Store: AutoBarn.com
|
1 1/2 Ton Rapid Lift Aluminum Floor Jack
$219.95
W1630 is a Full Size Rapid-Lift Aluminum Floor Jack. Its easy to carry, easy to use, and lightweight. Keep it in your trunk for whenever you will need it or when someone else would need it. Features 3, 000 lb Lifting Capacity 3-5/8'' to 17-1/2'' Lift Range 47-3/4 Handle Rubber Cushion Swivel Saddle 3 Pumps to Maximum Height [Read more]
Store: AutoBarn.com
|
1 Gallon Brake Bleeder Tank
$147.95
? Lightweight, plastic, easy to use. ? Portable tank fills and bleeds both standard and power brakes in a single operation. ? Tank is easily pressurized with just a few strokes of the built-in hand pump eliminating the need for the compressor. ? One (1) gallon capacity. 9.66-ft. of hose included. ? Features quick disconnect coupler, shut off valve and pressure gauge. By CalVan Tools. [Read more]
Store: AutoBarn.com
|
1 Gallon Steel Plunger Can
$54.95
? 1 gallon ? Perforated pan screen serves as a flame arrester. ? Top rim has molded edge protectors for smooth, trouble-free moistening. ? 24-gauge steel constuction. ? Finished in a tough, chemical resistant powder paint. ? Steel dasher assembly, brass plunger assembly. ? 7.25'' outer diameter x 11'' height, 5'' dasher diameter. ? Factory Manual (FM) tested and approved. ? Backed by industry exclusive Ten-Year Limited WarrantyBy Just Rite. [Read more]
Store: AutoBarn.com
|
|
1'' - 12 Point Superkrome Fractional Combination Wrench
$44.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1'' Air Impact Wrench With 6'' Extended Anvil- Ergonomic
$619.95
Chicago Pneumatic is pleased to introduce a new addition to the 1? impact wrench family. Long known for durability and performance, we have now added a tool which gives the durability you expect from Chicago Pneumatic with less weight. With directed exhaust to keep dust and materials away from the operator, 1, 550 ft-lbs of torque, over 5, 000 rpm of free speed, and ergonomically designed handles and trigger, this tool has all you need for heavy duty truck and equipment repair. Features included will make it the tool of choice for the most demanding truck tire service applications. Great power, durability, ergonomics, and speed. The leader in 1? impacts adds to the line: ? 6'' Extended anvil for tire work. ? 1, 550 ft-lbs of torque: Power to make this the most powerful 1? in its weight class ? 5, 000 rpm: Speed to get the job done fast and efficiently ? Directed exhaust: Directs exhaust air away from operator and work area ? Overmold Side Handle Grip: Comfort and control in any condition ? Four position power control: Power control for all types of applicationsBy Chicago Pneumatic. [Read more]
Store: AutoBarn.com
|
1'' Drive Fractional & Metric Truck Service Impact Socket Set - 10 Pc.
$258.95
No-Slip design in forged cro-moly. Lifetime manufacturer's warranty (excludes thin wall sockets). ? 1'' drive sockets in a metal case. Set includes: Deep - 33mm, 1'', 1-3/16'', 1-3/4'' Thin Wall Deep - 1-1/16'', 1-1/8'', 1-1/4'' Square - 13/16'', 15/16'' Controlled Depth - 1-1/2'' By Sunex International. [Read more]
Store: AutoBarn.com
|
1'' Drive Fractional Set - 8 Piece
$134.95
? Socket sizes included: 1'', 1-1/16'', 1-1/8'', 1-1/4'', 1-5/16'', 1-3/8'', 1-7/16'', 1-1/2''.By Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
|
1'' Drive Heavy-Duty Impact Wrench With 6 '' Extended Anvil
$568.95
If you want exceptional power, durability, and ease-of-use from an impact wrench, the Ingersoll-Rand 285B-6 delivers. The impact's robust, six-vane motor cranks out an impressive 1, 450 ft.-lb. of maximum torque with a 5, 000 RPM maximum free speed. Not only will the 285B-6 easily handle whatever task you put it to, the impact will also help you maneuver more comfortably thanks to its professional touch trigger, swept-back side handle for superior balance, and ''angled-down'' exhaust. If you have a big job, this is the tool for you. ? Professional Touch Trigger ? Ergonomic swept-back side handle provides convenience and maneuverability ? Robust 6-vane air motor delivers 1, 450 ft.-lb. maximum torque ? Durable 6'' extended anvil ? Adjustable 3-position power regulator provides ultimate power control Specifications ? Performance Rating: Heavy-Duty Extended Anvil ? Drive: 1 in. ? Max. Torque: 1, 450 ft.-lbs. (1, 966Nm) ? Free Speed: 5, 000 RPM ? Overall Length: 20.1 in. / 511 mm ? Weight: 27.3 lbs. (12.39 kg.) ? Sound Pressure/Power: 107dbA / 120dbA ? Length: 20.1 (511mm) ? Avg. Air Consumption: 10 CFM (283 L/min.) ? Avg. Air Consumption@Load: 37 CFM (1047 L/min.) ? Air Inlet (NPTF): 1/2 in. ? Minimum Hose Size: 1/2 in. (13 mm)By Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
1'' Drive Metric Truck Service Impact Socket Set - 7 Pc.
$192.95
No-Slip design in forged cro-moly. Lifetime manufacturer's warranty (excludes thin wall sockets). ? 1'' drive sockets in a blow molded case. Set includes: Deep - 27, 33, 35, 36, 41mm Square - 17, 21mmBy Sunex International. [Read more]
Store: AutoBarn.com
|
1'' Drive Split Beam Torque Wrench
$497.95
? The C5D600F has the unique feature of having a removeable ratchet head that that allows the wrench to be broken down and stored in a case that will fit in most truck storage areas with ease. Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style click wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to ''work in'' a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load. ? Extremely Accurate-Accurate within 4% of reading from 20% of full scale to full scale. ? Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions. ? Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob. ? Torque setting locks on adjustable wrenches for repetitive applications. ? The wrench length is designed to provide the leverage required for maximum torque applications. The length also provides the needed reach for those-hard-to-get-at places. ? Plastic molded storage case, calibration certificate, and instructions included. Square Drive: 1'' drive, detacheable ratchet Range: 200-600 lb. ft. Graduations: 10 lb. ft. Overall Length: 48-29/64'' Effective Length: 44-31/32'' Width: 2-3/8'' Head Height (without square): 1-1/4'' Weight: 11.76 lbs. (w/plastic case): 14.18 lbs. Finish: Nickel / Chrome Square Drive Service Kit: R44AR-RK Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14MBy Precision Instruments. [Read more]
Store: AutoBarn.com
|
1'' Drive Super Duty Impact Wrench With 6'' Ext. Anvil - Ergo Grip Design
$768.95
? Extended, robust bushing is at least 2 times more durable for extended life. ? Lighter weight in front of the gun .33 lbs lighter vs. IR2080-6, .58 lbs lighter vs. IR2080 ? Titanium hammer case weighs less and provides greater durability ? Coarse threading reduces stripping ? 7-Vane motor delivers 1, 600 ft-lbs max torque ? Ergonomic ''Chainsaw'' handle and grip for better control and comfort ? Net weight: 15.5 lbs ? Weighs up to 14.7 lbs less than CP797-6 ? 6, 800 rpm ? 21.5'' long ? Power settings: 3 forward, 1 reverse ? Made in USABy Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
|
1'' Drive Truck Service Set - 5 Piece
$129.95
? Socket sizes included: 13/16'' square; 33mm & 1-1/2'' deep hex; 1-1/8'' & 1-1/4'' deep thin wall hex.By Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
1'' Extra Heavy Duty Impact Wrench
$750.95
? Most popular 1'' truck tire tool available today ? Durable rocking dog clutch ideal for tire work ? Teasing throttle for easy bolt starting ? Convenient reverse valve for easy directional changes ? Applications: high volume tire work on trucks, buses and heavy equipment ? Ultimate Torque: 1400 ft.-lbs. Specifications: Square Drive in.: 1 Weight lb.: 29-3/4 Length in.: 22-1/4 Average Air Consumption CFM: 12 Air Inlet NPTF in.: 1/2 Working Torque Range ft.-lb: 150-900 Ultimate Torque @ 90PSI Fwd/Rev ft.-lb.: 1400By Chicago Pneumatic. [Read more]
Store: AutoBarn.com
|
1'' Impact Wrench With 6'' Anvil
$584.95
? 1, 450 ft.-lbs. of ultimate torque ? Three position power regulator with directional control ? Angled down exhaust directs air away from operator ? High efficiency 6 vane motor Specifications: Free speed: 5000 rpm Length: 20.2 inches Weight: 25.4 lbs.By Chicago Pneumatic. [Read more]
Store: AutoBarn.com
|
1'' Sqr. Dr. Industrial Impact Wrench, D-Handle
$1,049.95
? Unique pinless hammer provides for stability. ? Distinctive clutch design generates maximum power. ? Variable speed teasing throttle. ? Built-in regulator. ? Incredible power-to-weight ratio. ? Cushioned grip dead handle. ? Side-mounted bumper guards. ? Square Drive (in.) 1 ? Bolt Capacity (in.) 1-1/2 ? Anvil Retainer Type Ring ? Max Torque (ft./lbs.) 1, 400 ? Free Speed (RPM) 4, 700 ? Air Pressure (PSI) 90 ? Air Consumption (CFM) 57 ? Air Inlet (NPT/in.) 1/2 ? Air Hose (ID/in.) 1/2 ? Vibration Value (m/s2) 8 ? Overall Length (in.) 13 ? Ship Weight Each (lbs.) 23 ? Carton Pack 1 By JET. [Read more]
Store: AutoBarn.com
|
|
1'' Sqr. Dr. Industrial Impact Wrench, Pistol Grip
$1,049.95
? Unique pinless hammer provides for stability. ? Distinctive clutch design generates maximum power. ? Variable speed teasing throttle. ? Built-in regulator. ? Pistol grip style body. ? Muffled handle exhaust. ? Pistol grip design with center balanced hanger ring. ? Cushion grip dead handle. ? Square Drive (in.) 1 ? Bolt Capacity (in.) 1/2 ? Anvil Retainer Type Ring ? Max Torque (ft./lbs.) 1, 400 ? Free Speed (RPM) 4, 700 ? Air Pressure (PSI) 90 ? Air Consumption (CFM) 57 ? Air Inlet (NPT/in.) 1/2 ? Air Hose (ID/in.) 1/2 ? Vibration Value (m/s2) 8 ? Overall Length (in.) 11-1/16 ? Ship Weight Each (lbs.) 23 ? Carton Pack 2By JET. [Read more]
Store: AutoBarn.com
|
1'' Square Drive Heavy-Duty Industrial Impact Wrench -Pistol Grip
$922.95
? Designed for heavy-duty industrial and fleet applications ? Oil lubricated clutch mechanism ? Front exhaust ? Twin hammer clutch ? 1'' Square Drive ? 1-1/4'' Bolt Capacity ? Anvil Retainer Type ? 1, 250 ft./lbs. Max Torque ? 4, 100 RPM Free Speed ? 90 PSI Air Pressure ? 35 CFM Air Consumption ? 1/2 NPT/in. Air Inlet ? 1/2 ID/in. Air Hose ? 8 m/s2 Vibration Value ? 16-3/16 (in.) Overall Length ? 33 lbs. Ship Weight Each ? 1 Carton PackBy JET. [Read more]
Store: AutoBarn.com
|
1'' X 42'' Belt/8'' Sander, Miter Gauge, 1/3Hp, 1Ph, 115V Motor And Toggle Switch
$475.95
? Hinged idler wheel cover. ? Power take off, allows for mounting an optional flex shaft, when can be used to do carving, drum sanding, deburring and dozens of other jobs. ? Deluxe miter gauge that turns and locks for common angles 45? both left and right. ? Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles. ? Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt. ? Grind, sand or finish large work pieces on the disc unit fast and efficiently; combined with the tilting table, the operator has the advantage of chamfering or beveling, table is slotted to accept miter gauge. ? Delivers sharper, faster cutting actions; easy belt changes with a variety of grits, belt keeps the machine cool, so one can complete a wide range of jobs. ? When using non-woven synthetic belts the operator can blend, polish, buff or finish metal surfaces in addition to defuzzing wood surfaces. ? Deluxe miter gauge. ? Cast iron tilting table. ? Cast construction. ? Heavy duty steel base and rubber feet. ? Removable platen. ? Adjustable dust deflector and dust chute. ? Dimensions (in. AV x D x H): 15x24-1/2x19-1/2 ? Belt Size (in./W x L): 1x42 ? Belt Speed (SFPM): 3000 ? Belt Table Size (in.): 61/8x7 1/8 ? Belt and Disc Table Tilt: 45? Out ? Disc Diameter (in.): 8 ? Disc Speed (RPM): 1725 ? Disc Table Size (in.): 4x10 ? Dust Collection Outlet (in.): 1-1/2 diameter ? Motor: 1/3HP, 1Ph, 115V ? Overall Machine Dimensions (in./W x D x H) 21 x 22 x 14 ? Net Weight (lbs.): 80By Wilton. [Read more]
Store: AutoBarn.com
|
1''F - 3/4''M Drive, Impact Adapter
$56.95
Length (inch.): 2.75 ? Improved Coating: The black coating retains more rust preventative compound than black oxide.By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
|
1, 000 Lb. Capacity High Lift Transmission Jack
$1,679.95
Universal mounting head provides wide fore and aft tilt range, making alignment of transmission easier. Additional reach and spread are also provided. Foot pump and pedal release mechanism give precise ease of control when positioning or removing a transmission. Adjustable nylon tie-down strap safely secures load. Two-stage hydraulic cylinder design speeds lifting of transmission into position for installing. Very stable work platform has four swivel casters, enabling jack to be easily maneuuvered under the vehicle. Made in the U.S.A., carries OTC's unique Lifetime Marathon Warranty. Specifications: Max. load lifting capacity first stage: 1, 000 lbs. to 73 1/2'' Minimum height: 36'' Maximum height: 73 1/2'' Maximum forward tilt: 50 Degrees Maximum backward tilt: 38 Degrees Maximum side tilt (either side): 14 Degrees Leg width: 40'' Weight: 118 lbs. By OTC. [Read more]
Store: AutoBarn.com
|
1, 000 Pc Cotter Pin Assortment
$16.95
? Comes in organizer case. By Performance Tool Wilmar. [Read more]
Store: AutoBarn.com
|
1, 500 Lb Motorcycle Lift
$274.95
? 1, 500 lb. capacity and 17'' long skids that will lift the largest, widest cruisers. ? Lowest clearance available, 3-1/2'' at lowest level, with a wide lift range of 3-1/2'' to 16-3/4''. ? Removable handle provides 360? access to load. ? Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety. ? Two-year warrantyBy OTC. [Read more]
Store: AutoBarn.com
|
1, 500 Lb. Capacity Easy Roller
$203.95
The Stinger No. 1580 Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6, 000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms. Within minutes, one individual can easily move the car throughout the garage. The Easy Roller fits tread widths up to 12?, and the four heavy-duty casters can support up to 1, 500 lbs. per unit while, at the same time, protecting the shop floor from damage. ? Four heavy-duty phenolic casters. ? 1, 500 lb. capacity per unit. ? Hydraulic lift mechanism with locking pin. ? Fits tread widths up to 12?. ? Sold individually. Four required per vehicle.By OTC. [Read more]
Store: AutoBarn.com
|
|
1-1/16'' - 12 Point Superkrome Fractional Combination Wrench
$55.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-1/2 Ton Chain Puller - 5 Foot Lift
$228.95
American Power Pull Chain Pullers pull, lift, and drag with ease and speed. [Read more]
Store: AutoBarn.com
|
1-1/2'' - 12 Point Superkrome Fractional Combination Wrench
$118.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-1/2'' Drilling Capacity, 1-1/2 Hp, 1 Ph, 115/230V, Prewired 230V
$3,675.95
? UL listed motor. ? Variable spindle speeds. ? Spindle speeds change by front-mounted dial. ? Conveniently located operating controls. ? Large production table and base. ? Quick-release clamp on table. ? Easy-to-read internal depth gauge. Standard Equipment ? T-slotted worktable ? Internal depth stop ? Tapping and reversing controls on JDP-20VS-3 Specifications ? Cast iron drilling capacity (in.) 1-1/2 ? Steel drilling capacity (in.) 1-1/4 ? Cast iron tapping capacity (in.) N/A ? Column diameter (in.) 4 ? Distance spindle to column (max/in.) 10 ? Spindle distance to base 39 ? Spindle distance to table 28-1/2 ? Table Size (in.) 22 x 19-1/2 ? Table travel (in.) 20 ? T-slots (Number & Size) 2&S/8 ? T-slot centers (in.) 8-7/8 ? Work table capacity 110 (Its.) ? Spindle taper MT-3 ? Range of spindle speeds 300-2, 000 ? Base size (in.) 26x19 ? Base work table (in.) 13 x 15-1/2 ? Motor 1-1/2HP, IPh, 115/230V; Prewired 230V ? Overall height (in.) 69 ? Net weight (Ibs.) 720By JET. [Read more]
Store: AutoBarn.com
|
|
1-1/2'' Sqr. Dr. Heavy-Duty Industrial Impact Wrench, D-Handle
$2,783.95
? Innovative no-hammer clutch system. ? Accurate thread fastening works with patented clutch. ? Built-in air regulator. ? Superior power-to-weight ratio. ? Low noise level and minimum air consumption designed for super heavy-duty industrial applications. ? Square Drive (in.) 1-1/2 ? Bolt Capacity (in.) 2 ? Anvil Retainer Type Hole ? Max Torque (ft./lbs.) 3, 400 ? Free Speed (RPM) 3, 000 ? Air Pressure (PSI) 90 ? Air Consumption (CFM) 44 ? Air Inlet (NPT/in.) 1/2 ? Air Hose (ID/in.) 3/4 ? Vibration Value (m/s2) 8.3 ? Overall Length (in.) 16 ? Ship Weight Each (lbs.) 34 ? Carton Pack 1By JET. [Read more]
Store: AutoBarn.com
|
1-1/4'' - 12 Point Superkrome Fractional Combination Wrench
$75.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-1/4'' Hose Pinch-Off Pliers
$27.95
Applications: Ideal for use on radiator and heater hoses, water, air, vacuum and fuel lines. ? Made from high carbon and treated steel for long life. ? Patented clamping and automatic locking mechanism. ? Cushion grip handles for comfort and control. ? OD Capacity: 1-1/4''By K-D Tools. [Read more]
Store: AutoBarn.com
|
1-1/8'' - 12 Point Superkrome Fractional Combination Wrench
$65.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
|
1-3/8'' - 12 Point Superkrome Fractional Combination Wrench
$101.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-5/16'' - 12 Point Superkrome Fractional Combination Wrench
$89.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-7/16'' - 12 Point Superkrome Fractional Combination Wrench
$114.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1-Ton Chain Block Hoist - 10 Foot Lift
$185.95
? 10 Foot Lift? Drop forged safety hooks? Thick steel construction? Heat-treated? Triple gearedSpecifications:? Diameter: 1/4'', 6mm? Chain length: 12-11/16''? Max. Pulling Efforts: 69 lbs. [Read more]
Store: AutoBarn.com
|
|
1.0A Charger With Small Jack Plug
$26.95
? 120VAC, 60Hz, 38WBy Solar. [Read more]
Store: AutoBarn.com
|
1.2 Cfm 2-Stage Vacuum Pump, R-12/R-134A
$358.95
Specifications: Free air displacement: 1.2 CFM Number of stages: Two Factory micron rating: 50 microns Intake fitting: 1/4'' MFL and 1/2'' ACME Oil capacity: 5 oz. (148 ml) Motor size: 1/8 HP Voltage: 110-115V 50-60 Hz Weight: 10 lbs.By Robinair. [Read more]
Store: AutoBarn.com
|
1.9 Cfm 1/4 Hp Single Stage Vacuum Pump
$164.95
? Multi-voltage operation - the vacuum pump can be quickly converted to 115 or 230-volt operation. ? Sure grip handle - ergonomically designed for portability. ? Solid rubber base for improved shock resistance. ? Air cooled motors for operating under high temperature conditions. ? Ultimate vacuum ratings of 75 microns. ? Double intake - connections 1/4'' SAE and 3/8'' SAE male flare ports for use with mobile or stationary systems. ? Oil drain port - for easy vacuum pump oil maintenance. ? Vacuum pump oil level sight glass.By CPS Products. [Read more]
Store: AutoBarn.com
|
1/2 Dr. Ultra Duty Air Ratchet With Adjustable Noise Control
$204.95
The new CP 7830HQ Air Ratchets feature a break-through adjustable noise level control, without loss of power. In fact, they offer the highest torque available on the market. These lightweight, well balanced tools also feature the patented TriSpring? ratchet head. ? Adjustable noise level - as low as 79 dba! ? Highest torque available on the market. ? 2.7 lbs. ? Working Torque Range @ 90 PSI ? Speed 190 rpm ? 1/2''Model Number 7830HQ By Chicago Pneumatic. [Read more]
Store: AutoBarn.com
|
|
1/2 Hp 30'' Heavy-Duty Fan - Head Only
$409.95
? 2-speed, 115V, 1-phase ball-bearing, totally enclosed permanently lubricated motor, permanent split capacitor. ? 12' SJT-type, 3-conductor cord. ? Double-locking, chrome-plated steel guards. ? Steel hub/spider & aluminum blades. ? Pull-chain switch. ? Meet OSHA standards. ? 8100/9850 CFM. ? 5.6 Amps. ? 4-blade head. ? 5-Year Warranty.By TPI Industrial. [Read more]
Store: AutoBarn.com
|
1/2 Inch Socket Clips - Bag Of 25
$6.95
All metal construction By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1/2 Ton 10' Lift Hand Chain Hoist
$178.95
? All purpose hand chain hoist features impact resistant, lightweight steel construction with durable powder coat finish. ? Needle bearing supported load sheave for long life and low wear. ? Triple spur gears provide high efficiency ratio. ? Low headroom for easy installation even in confined areas. ? Compact and portable with excellent load spotting capabilities. ? Induction hardened, corrosion resistant grade 80 load chain. ? Hand chain cover designed for smooth operation and prevents side pull jamming. ? Completely enclosed Weston type automatic brake system with two ratchet pawls for positive load control. ? Drop forged safety hooks with durable latches swivel 360? for easy rigging. ? Proof tested and certified. ? Complies with OSHA, ANSI/ASME B30.16 and HST-2M standards.By JET. [Read more]
Store: AutoBarn.com
|
1/2'' - 12 Point Superkrome Fractional Combination Wrench
$18.95
? SuperKrome high polish finishBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
|
1/2'' - 12 Point Superkrome Long Pattern Combination Wrench
$23.95
? SuperKrome high polish finish ? SureGrip box end ? Made in the USABy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. 24 Pc. Deep Fractional Socket Set
$194.95
? Set includes: 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'', 7/8'', 15/16'', 1'', 1-1/16'', 1-1/8'', 1-3/16'', 1-1/4'', 1-5/16'', 1-3/8'', 1-7/16'', 1-1/2'', plus 3'', 5'' and 10'' Extensions and 1/2'' Universal Joint in a plastic molded case.By Grey Pneumatic. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. 28 Pc. Standard & Deep Fractional Socket Set
$158.95
? Includes: Deep Sizes 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'' Standard Sizes 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'', 7/8'', 15/16'', 1'', 1-1/16'', 1-1/8'', 1-1/4'', 3'' Extension and Universal Joint in a plastic molded case.By Grey Pneumatic. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. 30 Pc. Standard & Deep Metric Socket Set
$152.95
? Set includes: Deep Sizes 10mm thru 22mm and 24mm, Standard Sizes 10mm thru 22mm and 24mm, Universal Joint, 3'' Extension and plastic molded case.By Grey Pneumatic. [Read more]
Store: AutoBarn.com
|
|
1/2'' Dr. Deep Universal 12 Point Metric Impact Socket Set, 15 Pc.
$172.95
? Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm and 24mm ? Forged from the toughest steel, chrome molybdenum alloy ? Stored in a blow molded case for easy storage and transport ? Lifetime warranty By Sunex International. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. Heavy Duty Reversible Air Drill With Keyless Chuck
$154.95
? Heavy duty gearing for high performance jobs ? Muffled handle exhaust for extra quiet operation ? Heavy duty side handle for added control ? Reversible ? 1/2'' Jacobs? keyless chuck included Specifications: Free speed: 700 RPM Chuck size: 1/2'' Air inlet: 1/4'' NPT Air consumption: 4 CFM Length: 7-1/2'' Weight: 4-1/2 lbs.By Sunex International. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. Impact Extension Set - 4 Pc.
$64.95
? Includes: 3'', 5'', 10'', and 15'' impact extensions. ? Male end of extension has a steel ball retainer. By Sunex International. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. Micrometer Click Type Torque Wrench - 50-250 Lb. Ft.
$221.95
Engineered, precision bearing surfaces extend the calibrated life of the M line to as many as 60, 000 cycles or more and ensure the most reliable performance possible. In addition to flawless operation at release, calibration is completely external, unlike traditional mechanism that require disassembly and the replacement of blocks and shims. ? Extremely Accurate-Accurate within 3% of reading from 20% of full scale to full scale clockwise and counterclockwise. ? Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions. ? Exclusive Patented Calibration Mechanism-This patented mechanism allows for calibration in both the clockwise and counter-clockwise directions, plus with regard to spring rate, without the disassembly of the wrench. This protects against contamination of the working mechanism, and make calibration quick and easy. ? Exclusive Patented Roller-Release - This patented feature removes over 95% of the friction inherent in other click wrenches thereby extending life and providing for more reliable operation. ? All ''M'' Series meets or exceeds all applicable requirements of: ANSI / ASME B107.14M, GGG-W-00686C, BS6073: 1988, ISO6789 Specifications: Drive Size: 1/2''; fixed head ratchet Range: 50-250 lb. ft Graduations: 1 lb. ft. Length: 22 1/2'' Accuracy: 3% accuracy from 20% of full scale to full scale in both the clockwise and counter-clockwise directions. Effective Length at 20% of Full Scale: 22.00'' Effective Length at Full Scale: 21.00'' Maximum Overall Length: 24.75'' Minimum Overall Length: 23.75'' Weight: 4.1 lbs. Weight w/plastic case: 5.7 lbs. Finish: Nickel / Chrome Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14MBy Precision Instruments. [Read more]
Store: AutoBarn.com
|
|
1/2'' Dr. Micrometer Click-Type Torque Wrench
$69.95
? Accuracy ? 4% in clockwise direction ? Furnished in a fitted case ? Thumb screw at base of handle for locking torque setting ? Range: 25ft.lb.-250ft.lb ? 1ft.lb. graduations ? Square drive: 1/2''By Storm by Central. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. Split Beam Click Type Torque Wrench With Flex Head - 40 To 250 Lb. Ft.
$209.95
Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style click wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to ''work in'' a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load. ? Extremely Accurate-Accurate within 4% of reading from 20% of full scale to full scale. ? Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions. ? Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob. ? Torque setting locks on adjustable wrenches for repetitive applications. ? The wrench length is designed to provide the leverage required for maximum torque applications. The length also provides the needed reach for those-hard-to-get-at places. ? Plastic molded storage case, calibration certificate, and instructions included. Specifications: Square Drive: 1/2'' drive, flex-head Range: 40-250 lb. ft. Overall Length: 21-9/16'' Effective Length: 19'' Width: 1-5/8'' Head Height (without square): 3/4'' Weight: 3.39 lbs. Weight w/plastic case: 4.33 lbs. Finish: Nickel / Chrome Ratchet Service Kit: R33BF-RKBy Precision Instruments. [Read more]
Store: AutoBarn.com
|
1/2'' Dr. Standard Fractional Impact Socket - 1/2'', 12 Pt.
$8.95
? 12 point standard fractional impact socket. ? Hex Size: 1/2'' ? Diameter: 1.00 ? Length: 1.53By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1/2'' Dr., 14-Hole, Shallow Socket Holder - Red
$23.95
? Holds a 14-piece socket set up to 1 1/4? or 30mm (SAE and Metric) ? Accomodates Impact and Chrome sockets By Mechanic's Time Savers. [Read more]
Store: AutoBarn.com
|
|
1/2'' Drive 30Mm Deep Axle Nut Impact Socket - 12 Point
$24.95
? 30mm Deep Spindle NutBy Sunex International. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Chrome Universal Joint
$35.95
? SuperKrome? finish ? Built to exacting standards for long service lifeBy SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Deep Fractional Set - 13 Piece
$80.95
? Socket sizes included: 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16'', 7/8'', 15/16'', 1'', 1-1/16'', 1-1/8'', 1-1/4''.By Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Deep Impact Axle Nut Socket - 30Mm
$17.95
Special deep design works on GM & Chrysler spindle nut applications Sockets are 6 point No-Slip design in forged cro-moly steel grip flats of fasteners not the corners. Lifetime manufacturer's warranty By Sunex International [Read more]
Store: AutoBarn.com
|
|
1/2'' Drive Deep Impact Axle Nut Socket Set - 4 Pc.
$62.95
? Special deep design works on GM & Chrysler spindle nut applications ? Sockets are 6 point. No-Slip design in forged cro-moly steel grip flats of fasteners not the corners . Lifetime manufacturer's warranty. Includes: 30mm, 32mm, 34mm, 36mm in blow molded caseBy Sunex International. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Deep Metric Set - 14 Piece
$87.95
? Socket sizes included: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm.By Ingersoll-Rand. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Flex Head Handle - 24'' Long
$63.95
? Breaker bar has SuperKrome? finish By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
1/2'' Drive Flex Head Handle - 16'' Long
$49.95
? Breaker bar has SuperKrome? finish By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
|
Fan Forced Portable Unit Heater
$285.95
? Operates on 240V or 208V. ? Finned steel tubular heating element. ? Internal manual reset thermal cutout. ? 6' long cord with molded plug which can be removed at terminal block for hard wire installations. ? Temperature control thermostat with 35?F to 85?F range. ? Swivel base can be used as a wall, floor or ceiling mount. ? 10' air throw - 262 CFM. ? 5600/4200 Watts. ? 19107/14330 Max BTU's. ? 240/208 Volts. ? 1 Phase. ? 23.4/20.2 Amps. ? 75? F Temp Rise. ? Width: 13 1/2'', Height: 17 1/2'', Depth: 11 1/2''. ? Weight: 20 lbs.By TPI Industrial. [Read more]
Store: AutoBarn.com
|
OTC TPMS Scan Tool and Test Pack with FREE T.I.P.S Tool
$1,283.95
Maximize the workflow through the shop with one tool for TMPS Scan required functions and another for TPMS RF functions. No waiting.Features:? Market leading Genisys technology based tool? Brilliant color display? Simple control buttons with hot keys for fast operation? Color LED?s indicating power and vehicle communication? English, Spanish and French menu language support? Fast updates via removable flash memory. Smart Cable Technology (patent pending)? Eliminates the need for multiple cables, keys or inserts to communicate to the broad U.S. vehicle population? Field expandable hardware accommodates future newAvailable Scan Coverage:? Special Tests (bidirectional testing)- TPMS sensor initialization / activation- TPMS sensor I.D. programming? Read / Clear Diagnostic Trouble Codes (DTC)- TPMS sensor failures and incorrect tire location can set DTC?s? Displays TPMS Datastream values- Scan tool display of vehicle computer TPMS sensor tire pressure information- I.e. Left Front Tire 32 psi.? Repair Information on tool- TPMS test and reset proceduresThe TPMS Quick Reference Manual is ?On-Tool'' providing fast access to TPMS information at the car! The Quick Reference manual in the TPMS Scan software covers both Direct and Indirect systems and contains the following topics:? TPMS Description ? Reset Requirements? Torque Specifications ? Reset ProceduresThe Quick Reference information is specifically for placing the vehicle in Learn Mode and completing the Reset ProcedureIncludes:? TPMS scan? Smart cable? Soft case? FREE TIPS003A Tool [Read more]
Store: AutoBarn.com
|
Professional Uv Leak Detector Kit With 50W
$83.95
Kit comes complete with: ? 12 Volt/50 Watt UV Leak Detector. ? 1 Ounce Coolant Dye ? 1 Ounce Oil/ATF/Fuel Dye ? Mini Dye Injector (10 Applications of Universal A/C Dye) which is compatible with R134a and R12 systems ? Dye Remover ? R12 Adapter ? UV Enhancing Safety Glasses ? A/C Connection hose with R134a Coupler ? 12 Service Labels By Mastercool. [Read more]
Store: AutoBarn.com
|
Portable Forced Air Space Heater With Thremostat - 70, 000 Btu
$294.95
? Heats up to 1, 600 sq. ft. ? 70, 000 Btu/Hr ? 5-Gallon Tank ? Runs Approximately 9.5 Hours Per Tank ? Patented HSI Technology ? Fuel Gauge ? Built-in Thermostat ? Lighted Power Switch ? One-Year Warranty ? For 2 to 3-Car Garages, Remodeling, Construction ProjectsBy Reddy Heater. [Read more]
Store: AutoBarn.com
|
|
OTC Bulletproof Torx? Bit Socket - T40-3/8'' Drive
$12.95
? Durability guaranteed? Made of the finest heat-treated steel [Read more]
Store: AutoBarn.com
|
1/4'' Drive Tamper-Proof Torx? Bit Socket - T27
$14.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
3/8'' Drive Torx? Bit Socket - T50
$18.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
36 Pc. Master Torx? Set Including Tamper Proof Torx?
$54.95
? Torx? sockets: E5, E6, E7, E8, E10, E12, E14, E16, E18 and E20. ? Torx? bits: T6, T10, T15, T20, T25, T27, T30, T40, T45, T47, T50, T55, T60. ? Tamper resistant: T10, T15, T20, T25, T27, T30, T40, T45, T50, T55. ? Features a 1/4'' Finger Nut Driver/Bit Holder so that small jobs con be done by hand or with a 1/4'' ratchet. ? 1/4'' to 3/8'' Twin Spin Drive Converter so all bits will work with either a 1/4'' ratchet or a 3/8'' ratchet. ? Comes in blow molded storage case.By CalVan Tools. [Read more]
Store: AutoBarn.com
|
|
9 Piece 3/8'' & 1/2'' Drive Fractional Hex Bit Socket Set
$98.95
9 piece set is made in the U.S.A. Bit sockets feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 steel. High-torque can be achieved with the use of a ratchet, T-handle or spinner handle. With the help of an extension or universal joint, bits can be used in awkward spaces. Set Contents: 3/8'' Drive - 5/32'', 3/16'', 7/32'', 1/4'', 5/16'', 3/8'' Hex Bit Sockets; 1/2'' Drive - 1/2'', 9/16'', 5/8'' Hex Bit Sockets. Packaged in a molded plastic case.By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
Super Torx? Set
$34.95
? 20% Stronger than one-piece Torx? bits This set includes nine of the most popular Torx? sizes for automotive applications. The six smaller sockets are 1/4'' drive and the 3 larger are 3/8'' drive. Includes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-47 Torx? internal sockets in a handy vinyl holder.By Lisle. [Read more]
Store: AutoBarn.com
|
K-D 9PC. TORX PRESS FIT (2PC.) BIT
$36.95
Includes:? T-10 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58902)? T-15 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58904)? T-20 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58905)? T-25 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58907)? T-27 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58908)? T-30 2Pc. Internal Torx? Socket 1/4'' Dr. (KD 58910)? T-40 2Pc. Internal Torx? Socket 3/8'' Dr. (KD 58911)? T-45 2Pc. Internal Torx? Socket 3/8'' Dr. (KD 58913)? T-50 2Pc. Internal Torx? Socket 3/8'' Dr. (KD 58914) [Read more]
Store: AutoBarn.com
|
1/2'' Drive Impact Hex Driver Metric Set - 10 Piece
$83.95
? Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength. ? Allows up to 20% more torque to be applied than on standard hex impact sockets. ? The shift in pressure allows less socket wall thickness, increasing access to tight areas. ? Sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners. ? Set contains: 2906M - 6mm, 2907M - 7mm, 2908M - 8mm, 2910M - 10mm, 2912M - 12mm, 2914M - 14mm, 2915M - 15mm, 2917M - 17mm, 2918M - 18mm, 2919M - 19mm. ? Packaged in a molded storage case.By Grey Pneumatic. [Read more]
Store: AutoBarn.com
|
|
9 Pc.Torx Plus Bit Socket Set
$109.95
TORX Plus bit sockets are designed for use on a new fastener found on today's vehicles in interior, trim and dashboard applications. Set Contents: 9 Piece - 1/4'' Drive - T10, T15, T20, T25, T27, T30 TORX Plus Bit Sockets; 3/8'' Drive - T40, T45, T50 TORX Plus Bit Sockets. Packaged on a rail.By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
10 Piece 3/8'' Drive Tamperproof Star Bit Socket Set - 50Mm Long
$33.95
? T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-50, T-55 star bit sockets ? Socket HolderBy Genius Tool. [Read more]
Store: AutoBarn.com
|
10 Piece 3/8'' Drive Tamperproof Star Bit Socket Set - 110Mm Long
$50.95
? T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-50, T-55 star bit sockets ? Socket Holder By Genius Tool. [Read more]
Store: AutoBarn.com
|
8 Piece Fractional Wobble Hex Bit Socket Set - 50Mm Long
$25.95
? 1/8'', 5/32'', 3/16'', 7/32'', 1/4'', 9/32'', 5/16'', 3/8'' ? Socket holder ? 50mm longBy Genius Tool. [Read more]
Store: AutoBarn.com
|
|
12 Mm, 1/2'' Drive, Metric Hex Bit Socket
$22.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? C-Clip retention - bit holder stays secure on drive tool when in use ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
8 Mm, 3/8'' Drive, Triple Square Metric Bit Socket
$19.95
Hex Size: 8 mm Hez Shank (inch.): 5/16'' Length (inch): 3.51 By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
9 Pc. Metric Stubby Hex Socket Set
$30.95
? 9 piece set includes hex driver sockets 2mm thru 10mm. ? S2 alloy steel construction, the strongest, hardest hex drivers available. ? Stubby one piece design, fits into tight areas. ? Heat treated to 56-62 RC hardness for extra durability. ? Sockets are 1/4'' drive. ? Satin finish chrome plated. ? Comes in a molded case. ? Lifetime warranty. By VIM Hand Tools. [Read more]
Store: AutoBarn.com
|
1/4'' Drive Tamper-Proof Torx? Bit Socket - T20
$14.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
|
1/4'' Drive Torx? Bit Socket - T20
$14.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
8 Piece 1/2'' Drive Male Pipe Plug Socket Set
$109.95
8 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. Ideal for the removal of manual transmission, transfer case, engine oil pan, differential housing drain, fill plugs and various other applications for both foreign and domestic vehicles. Set Contents: 1/4'', 9/32'', 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', 5/8'' Male Pipe Plug Sockets. Packaged on a rail.By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
Lisle 9 Pc. Torx Bit Set
$32.95
? All Torx bits are made of heat-treated alloy steel. 9 pcSet includes T-10 through T-50. T-10 through T-30 are 1/4'' drive. T-40 through T-50 are 3/8'' [Read more]
Store: AutoBarn.com
|
3/8'' Drive Torx? Bit Socket - T45
$15.95
? SuperKrome? finish bit holder ? High strength, S2 steel bits ? 100% made in the U.S.A. By SK Hand Tool. [Read more]
Store: AutoBarn.com
|
