Technical English - Spanish Vocabulary.

 


Custom Search

 

GROOVE


 

 



SEARCH :groove



Sunex Tools SU2510 1/2 Drive 10 Impact Extension
Sunex Tools SU2510 1/2 Drive 10 Impact Extension
Housewares>Tools>Sockets
Product Catalog
Description : .
  • Notice the non-slip difference. The grooved pattern along the inside walls of the socket are strategically-placed micro-grips -- and one of the more noticeable design innovations.
  • Now you can remove most bolts that have up to 75 percent of their corners stripped away.
  • They grip even the most worn fasteners..
    **** PRICE: USD 28
    Manufacturer : Sunex Tools
    SKU: EGLE10056
    UPC:
    Tags: Sunex Tools

    Start of page

    Vim Products VIMV230 U Joint Snap Ring Plier
    Vim Products VIMV230 U Joint Snap Ring Plier
    Housewares>Tools>Pliers
    Product Catalog
    Description : .U Joint Snap Ring Pliers are especially designed to easily remove and replace universal joint snap rings used on Hotchkiss drive shafts. Designed by an experienced automotive technician the pliers break loose even highly-corroded rings then grip the ring and lift it out. The unique jaw design allows the mechanic to easily pick up the snap ring from a flat surface using just one hand. The ring can then be compressed and placed back into the U - Joint groove. Pliers may also be used to force the ring into tight or rusted grooves. Made of heat-treated alloy steel with red plastic grips..
    **** PRICE: USD 54
    Manufacturer : Vim Products
    SKU: WTD12364
    UPC: 777780948593
    Tags: Vim Products

    Start of page

    Schley Products- Inc SCH96800 Camshaft Pulley Holding Tool Universal
    Schley Products- Inc SCH96800 Camshaft Pulley Holding Tool Universal
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .This wrench is designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt.
    For use with many OHC cam engines. Very useful on many asian import engines especially transverse mounted V6 motors such as the Nissan VG30 in Maximas as well as the Toyota 3VZFE and IMZFE used in Camrys. The rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking device..
    **** PRICE: USD 97
    Manufacturer : Schley Products, Inc
    SKU: ISN1216
    UPC:
    Tags: Schley Products, Inc

    Start of page

    Brush Research BRMGBD3 3-Inch 180 Grit Flex Engine Cylinder Hone
    Brush Research BRMGBD3 3-Inch 180 Grit Flex Engine Cylinder Hone
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .For any type and size of cylinder the FLEX-HONE process (Superfinishing) produces a controlled surface condition unobtainable by any other method. It involves finish geometry and metallurgical structure. A high percentage plateau free of cut torn and folded metal (with radiused ports). A resilient flexible honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering self-centering to the bore and self-compensating for wear. Specifically it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented amorphous or smeared metal from previous operations. It is accomplished at a low pressure where the stones float. See and read the various booklets of actual tests covering almost every situation that will ensure a superior performance in situations depending on surface finish. The particular type of Flex-Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys for oil retention as opposed to the often unidirectional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the Flex-Hone..
    **** PRICE: USD 72
    Manufacturer : Brush Research Manufacturing Co Inc
    SKU: ISN069
    UPC: 777780608367
    Tags: Brush Research Manufacturing Co Inc

    Start of page

    Brush Research BRMBC3 .075 Inch 180 Grit Flex Brake Cylinder Hone
    Brush Research BRMBC3 .075 Inch 180 Grit Flex Brake Cylinder Hone
    Housewares>Tools>Vehicle Repair>Vehicle Specialty Tools
    Product Catalog
    Description : .For any type and size of cylinder The FLEX-HONE process (Superfinishing) produces a controlled surface condition unobtainable by any other method. It involves finish geometry and metallurgical structure. A high percentage plateau free of cut torn and folded metal (with radiused ports).
    A resilient flexible honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering self-centering to the bore and self-compensating for wear. Specifically it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented amorphous or smeared metal from previous operations. It is accomplished at a low pressure where the stones float. See and read the various booklets of actual tests covering almost every situation that will ensure a superior performance in situations depending on surface finish. The particular type of Flex-Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys for oil retention as opposed to the often unidirectional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the Flex-Hone..
    **** PRICE: USD 49
    Manufacturer : Brush Research Manufacturing Co Inc
    SKU: ISN066
    UPC:
    Tags: Brush Research Manufacturing Co Inc

    Start of page

    Woodlore 83521 Aromatic Cedar Drawer Liners- Set Of 10 Pieces
    Woodlore 83521 Aromatic Cedar Drawer Liners- Set Of 10 Pieces
    Housewares>Laundry Appliances & Garment Care>Laundry Accessories>Laundry Cleaners & Accessories
    Product Catalog
    Description : .Aromatic Cedar Drawer Liners Set of 10 Pieces
    Place Drawer Liners in dresser drawers or on closet shelves to freshen clothing with the natural scent of aromatic cedar.
    Aromatic cedar with its distinct fragrance helps repel insects and keeps closets and drawers smelling naturally fresh.

    Tongue-and-groove edging ensures a snug fit..
    **** PRICE: USD 27
    Manufacturer : Woodlore
    SKU: WDLR189
    UPC: 024817835211
    Tags: Woodlore

    Start of page

    Sheffield Research SHF8002 Tester Circuit Cordless with Buzzer
    Sheffield Research SHF8002 Tester Circuit Cordless with Buzzer
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .
  • No ground wire or clip required.
  • Safe with ECMs sensors transducers airbags.
  • Detects from 3 to 28 volts.
  • Light sound and vibration.
  • Rugged stainless steel construction.
  • Unique V-groove needle accessory for wire piercing and safe carrying.
  • Solid state lamp for lifetime lasting performance.
  • Replaceable long-life alkaline batteries included..
    **** PRICE: USD 41
    Manufacturer : Sheffield Research
    SKU: WTD11796
    UPC: 833303000015
    Tags: Sheffield Research

    Start of page

    Blair BLR11104-3 3Pk Spotweld & Access Cutter 5-16 Rotabroach 3-Pk
    Blair BLR11104-3 3Pk Spotweld & Access Cutter 5-16 Rotabroach 3-Pk
    Housewares>Tools>Cutting, Stripping, and Crimping Tools
    Product Catalog
    Description : .

    Features and Benefits:

    Blair 11000-SERIES ROTABROACH CUTTERS... for heavy duty use in sheet metal & materials up to 1/2 thick. Annular tools that cut clean burr-free and round holes fast... unlike twist drills that push or hole saws that tear through materials. Because they’re hollow there’s no dead zone as with a twist drill so less thrust is required and no deforming of stock or jagged edges occurs. Multiple cutting teeth precision ground instead of stamped like hole saws give long tool life. For body shops and frame straighteners custom building and detailing aftermarket and trailer hitch installations rustproofers and undercoaters... wherever fast rugged and superior quality holes are required... Rotabroach 11000-Series Cutters are the single answer. Patented tooth geometry also prevents chip clogging when cutting steel sheet metal plastic and wood. Arbors for 11000-Series cutters fit 3/8 and 1/2 hand held drill chucks and use a spring loaded pilot guide or skip-proof pilots to eliminate pre-drilling operations.

    • Fits 3/8 or 1/2 chuck
    • Rugged arbor houses pilot guides and adjustable tension spring
    • Patented long-lasting tooth design
    • Spring-loaded heavy duty pilot
    • Guide eliminates pre-drilling

    Can Be Used For:

    • Drilling slots
    • groove to depth
    • Tube joints
    • Partial holes
    • Removing bolt screw and rivet heads
    • Removing frozen nuts

    Fractional Sizes
    through sizes sold in packages of 3
    Dia. (inches)---5/16
    Decimal equiv. (inches)---.3125
    Max D.O.C. 1/4

    .
    **** PRICE: USD 36
    Manufacturer : Blair
    SKU: WTD9619
    UPC: 632175111047
    Tags: Blair

    Start of page

    Blair BLR11121 Spotweld Pilots For Blr11090 3-8In. 3-Pk
    Blair BLR11121 Spotweld Pilots For Blr11090 3-8In. 3-Pk
    Housewares>Tools>Cutting, Stripping, and Crimping Tools
    Product Catalog
    Description : .

    Features and Benefits:

    Blair 11000-SERIES ROTABROACH CUTTERS... for heavy duty use in sheet metal & materials up to 1/2 thick. Annular tools that cut clean burr-free and round holes fast... unlike twist drills that push or hole saws that tear through materials. Because they’re hollow there’s no dead zone as with a twist drill so less thrust is required and no deforming of stock or jagged edges occurs. Multiple cutting teeth precision ground instead of stamped like hole saws give long tool life. For body shops and frame straighteners custom building and detailing aftermarket and trailer hitch installations rustproofers and undercoaters... wherever fast rugged and superior quality holes are required... Rotabroach 11000-Series Cutters are the single answer. Patented tooth geometry also prevents chip clogging when cutting steel sheet metal plastic and wood. Arbors for 11000-Series cutters fit 3/8 and 1/2 hand held drill chucks and use a spring loaded pilot guide or skip-proof pilots to eliminate pre-drilling operations.

    • Fits 3/8 or 1/2 chuck
    • Rugged arbor houses pilot guides and adjustable tension spring
    • Patented long-lasting tooth design
    • Spring-loaded heavy duty pilot
    • Guide eliminates pre-drilling

    Can Be Used For:

    • Drilling slots
    • groove to depth
    • Tube joints
    • Partial holes
    • Removing bolt screw and rivet heads
    • Removing frozen nuts
    .
    **** PRICE: USD 13
    Manufacturer : Blair
    SKU: WTD9618
    UPC: 632175111214
    Tags: Blair

    Start of page

    Martin Tools MRT153FG Hammer Cross Chisel Fiberglass
    Martin Tools MRT153FG Hammer Cross Chisel Fiberglass
    Housewares>Tools>Hammers
    Product Catalog
    Description : .Features and Benefits:
    • 1-9/16 diameter and 3 long cross chisel
    • Made with a solid hickory handle
    • Limited lifetime warranty
    • Made in the USA
    Cross-grooved face for shrinking sheet metal and cross chisel end for straightening trim pieces or forming metal in tight corners.  Available with solid hickory handle only 1-9/16 diameter face and 3 long cross chisel.  Its the choice of professionals because of their superior quality. Martin Hammers feature precise-ground heads with excellent balance the proper weight and tough handle.

    .
    **** PRICE: USD 55
    Manufacturer : Martin Tools
    SKU: WTD10733
    UPC: 697950375250
    Tags: Martin Tools

    Start of page

    Dremel DRE290 Variable Speed Engraver Electric
    Dremel DRE290 Variable Speed Engraver Electric
    Housewares>Tools>Power Tools>Power Tools
    Product Catalog
    Description : .

    Features and Benefits

    • Ideal for identifying and personalizing your valuables as well as decorative engraving
    • At 7200 strokes per minute the 115 volt motor and carbide point do more than just scratch the surface
    • Stroke adjustment dial on tool regulates engraving depth from fine lines to deep grooves
    • Get the performance you need to engrave on metal plastic glass ceramic wood and even leather
    • Setting the dial at 1 through 3 engraves soft materials such as wood and leather.
    .
    **** PRICE: USD 39
    Manufacturer : Dremel
    SKU: WTD9737
    UPC: 080596002909
    Tags: Dremel

    Start of page

    Channellock PC1 4 Piece Racers Set of Water Pump Pliers
    Channellock PC1 4 Piece Racers Set of Water Pump Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Right angle teeth grip in all directions for maximumbite and minimum wear.d groove pliers.
  • Patented undercut tongue and groove design assures noslip jaw action.
  • Patented reinforcing edge minimizes stress breakage.
  • Patented PermaLock fastener eliminates nut and boltfailures.
  • Distinctive CHANNELLOCK BLUE comfort grips.
    (460) 16 Tongue and groove Plier
    (440) 12 Tongue and groove Plier
    (426) 6 1/2 Tongue and groove Plier
    (424) 4 1/2 Tongue and groove Plier.
    **** PRICE: USD 87
    Manufacturer : Channellock
    SKU: EGLE3788
    UPC:
    Tags: Channellock

    Start of page

    Gearwrench 2398 Automatic Transmission Clutch Spring Compressor
    Gearwrench 2398 Automatic Transmission Clutch Spring Compressor
    Housewares>Tools>Vehicle Repair>Vehicle Repair
    Product Catalog
    Description : .This tool permits easy removal and installation of snaprings. It compresses automatic-transmission clutch springson some GM Ford Toyota and other transmissions. The jobcan be completed without removing the center shaft andclutch assembly from the transmission housing. To use: forcelegs in and catch jaws inside transmission drum groove.Then loosen wing nuts and adjust pushers. Lastly tightenscrew until lock ring is free to be removed. The uniquedesign makes it easy to use..
    **** PRICE: USD 168
    Manufacturer : Gearwrench
    SKU: EGLE3942
    UPC: 082171023989
    Tags: Gearwrench

    Start of page

    Gearwrench 82220 18 Inch To 29 Inch Gearwrench Indexible Pry Bar Extends
    Gearwrench 82220 18 Inch To 29 Inch Gearwrench Indexible Pry Bar Extends
    Housewares>Tools>Pry Bars
    Product Catalog
    Description : .Indexible Multi Use Pry Bars: Puts the pry bar where youneed it for best leverage Exceeds ANSI requirements forproven strength
  • Extends 18 to 29
  • Puts the pry bar where you need it for best leverage
  • Exceeds ANSI requirements for proven strength
  • Indexible to over 180 degrees for greater leverage
  • 14 locking positions for unmatched access
  • grooved foot for added traction.
    **** PRICE: USD 122
    Manufacturer : Gearwrench
    SKU: EGLE4003
    UPC: 099575822209
    Tags: Gearwrench

    Start of page

    Knipex KX8701-12 12 Cobra Box Tongue and Groove Pliers
    Knipex KX8701-12 12 Cobra Box Tongue and groove Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Box joint construction a new generation of Water Pump Pliersfor easier & more secure workingPress button action for fast & firm adjustment directly onthe workpiece selectedJaw opening is positively ensured slim jaw profile allowsfor access in tight placesSingle-hand adjustment self-gripping on pipes and nuts.The guard prevents operators fingers getting pinchedMaterial: chrome vanadium electric steel oil-hardened.
    **** PRICE: USD 58
    Manufacturer : Knipex
    SKU: EGLE4098
    UPC: 843221003135
    Tags: Knipex

    Start of page

    Gearwrench 82233 33 Inch Gearwrench Indexible Pry Bar With Grooved Foot
    Gearwrench 82233 33 Inch Gearwrench Indexible Pry Bar With grooved Foot
    Housewares>Tools>Pry Bars
    Product Catalog
    Description : .Indexible Multi Use Pry Bars: Puts the pry bar where youneed it for best leverage Exceeds ANSI requirements forproven strength
  • Puts the pry bar where you need it forbest leverage
  • Exceeds ANSI requirements for proven strength
  • Indexible to over 180 degrees for greater leverage
  • 14 locking positions for unmatched access
  • grooved foot for added traction.
    **** PRICE: USD 122
    Manufacturer : Gearwrench
    SKU: EGLE4005
    UPC: 099575822339
    Tags: Gearwrench

    Start of page

    Fowler FOW74-150-006 Rotocal Electronic Rotor Gage
    Fowler FOW74-150-006 Rotocal Electronic Rotor Gage
    Housewares>Tools>Measuring Tools and Templates>Assorted Measuring Tools
    Product Catalog
    Description : .
    Reads in inch metric and fractions
    Range: 6/150mm
    Resolution: .0005/.01mm
    Direct inch/metric/fraction conversion
    Water resistant to IP54 standards
    Conical anvil for groove measurement
    3.5 jaw depth for larger rotors
    Molded case.
    **** PRICE: USD 74
    Manufacturer : Fowler
    SKU: WTD6942
    UPC: 646795168411
    Tags: Fowler

    Start of page

    Vise Grip VIS2078512 12 Groove Joint Pliers
    Vise Grip VIS2078512 12 groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
    Durable nickel chromium steel construction.
    ProTouch grips provide extra comfort and reduces hand fatigue.
    Right angle teeth grip in all directions for maximum bite.
    Meets or exceeds ANSI specifications.
    Size: 12
    Jaw Capacity: 2-1/4
    Jaw Positions: 7
    Pipe Size: 2-1/2
    Nut Size (across flats): 2.36.
    **** PRICE: USD 20
    Manufacturer : Vise Grip
    SKU: WTD6431
    UPC: 38548028279
    Tags: Vise Grip

    Start of page

    SK Hand Tool SK 19769 9 Piece .25 & .38 Drive Tamper-Proof TORX Bit Socket Set
    SK Hand Tool SK 19769 9 Piece .25 & .38 Drive Tamper-Proof TORX Bit Socket Set
    Housewares>Tools>Sockets
    Product Catalog
    Description : .9 piece set is made in the U.S.A. Bit socketss feature SKs high polish SuperKrome finish which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 steel. High-torque can be achieved with the use of a ratchet T-handle or spinner handle. With the help of an extension or universal joint bits can be used in awkward spaces.Set Contents: 1/4 Drive - T10 T15 T20 T25 T27 T30 Tamper-Proof Bit Sockets; 3/8 Drive - T40 T45 T50 Tamper-Proof TORX Bit Sockets . Packaged on a rail..
    **** PRICE: USD 108
    Manufacturer : SK HAND TOOL LLC
    SKU: WTD3517
    UPC: 002514119769
    Tags: SK HAND TOOL LLC

    Start of page

    Multi-purpose 24-piece Router Bit Set
    Multi-purpose 24-piece Router Bit Set
    Housewares>Tools>Power Tools>Power Tools
    Product Catalog
    Description : .This is a great set for the woodworker just starting out or anyone needing a commercial quality set of bits. This same set is being sold by popular catalogs and online retailers for a lot more money. These yellow bits do cut well and are a great value.Features include:-1/4 shanks fit all routers -carbide tips-Popular Bit Cutting Profiles -Wooden storage caseSet includes:-1/2 mortising bit -1/2 combination bevel bit -3/8 dovetail bit -1/2 dovetail bit -1/2 90 degree V-groove bit -3/8 round nose bit -1/2 round nose bit -3/8 trimming bit -1/4 panel pilot bit -1/4 straight bit -3/8 straight bit -1/2 straight bit -3/4 straight bit -1/2 flush trim bit -1/8 radius round over bit -3/16 radius round over bit -1/4 radius round over bit -3/8 radius round over bit -1/4 cove bit -3/8 cove bit -1/2 45 degree chamfer bit -1/4 Roman Ogee bit-1/4 slot cutter bit -1/2 rabeting bit.
    **** PRICE: USD 80
    Manufacturer : Trademark Poker
    SKU: POKER11995
    UPC: 844296000036
    Tags: Trademark Poker

    Start of page

    Miracle Point SNP8 Straight Nose Pliers with Magnifier
    Miracle Point SNP8 Straight Nose Pliers with Magnifier
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .Straight tip pliers complete with attached 5X magnifier. Serrated tips for firmer hold Center groove for gripping wire Precision sharpened tips for miniature work Box jointed for longer life and greater accuracy Tension assisted for increased control and easy release Also available in bent tip (BNP8) or as a set (MTS12).
    **** PRICE: USD 16
    Manufacturer : Miracle Point
    SKU: JGE012
    UPC: 023661813307
    Tags: Miracle Point

    Start of page

    Miracle Point ST8 Super Tweezers with Magnifier - Set of 2
    Miracle Point ST8 Super Tweezers with Magnifier - Set of 2
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .Super Tweezers with Magnifier (Set of 2) Tweezers are 5 inch long with super-sharp tips made of fully hardened spring steel. The inside of the tips has an extra groove to make handling small objects simple. 5 inch Long Multi-adjustable arm 5X power super clear 1-.25 inch glass magnifying lens Spring steel Super grip precision sharpened tips.
    **** PRICE: USD 21
    Manufacturer : Miracle Point
    SKU: JGE013
    UPC: 023661813512
    Tags: Miracle Point

    Start of page

    Miracle Point BNP8 Bent Tip Pliers with Magnifier
    Miracle Point BNP8 Bent Tip Pliers with Magnifier
    Housewares>Tools>Assorted Tools
    Product Catalog
    Description : .Bent tip pliers complete with attached 5X magnifier. Serrated tips for firmer hold Center groove for gripping wire Box jointed for longer life and greater accuracy Tension assisted for increased control and easy release Also available in straight tip (Item SNP8) or as a set (MTS12).
    **** PRICE: USD 16
    Manufacturer : Miracle Point
    SKU: JGE001
    UPC: 023661813314
    Tags: Miracle Point

    Start of page

    SK Hand Tools 19749 9 Piece Tamper Proof Hex Bit Socket Set
    SK Hand Tools 19749 9 Piece Tamper Proof Hex Bit Socket Set
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .9 piece set is made in the U.S.A. Bit socketss feature SK s high polish SuperKrome finish which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 steel. High-torque can be achieved with the use of a ratchet T-handle or spinner handle. With the help of an extension or universal joint bits can be used in awkward spaces..
    **** PRICE: USD 116
    Manufacturer : SK HAND TOOL LLC
    SKU: EGLE1499
    UPC: 2514119749500
    Tags: SK HAND TOOL LLC

    Start of page

    KD Hand Tools 3508 Adjustable Oil Filter Wrench Pliers
    KD Hand Tools 3508 Adjustable Oil Filter Wrench Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Pliers cover a complete range of filter removal from 2in to 5in in diameter. Ratchet and lock mechanism allow for multiple settings for sure fit - eliminating slippage. Jaws are grooved for better holding of the filter. Forged for superior strength. Plastisol coated handles provide a firm grip..
    **** PRICE: USD 24
    Manufacturer : KD Tools
    SKU: EGLE3502
    UPC: 082171035081
    Tags: KD Tools

    Start of page

    Vise Grip 2078512 12 Inch Groove Joint Pliers
    Vise Grip 2078512 12 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .The IRWIN Vise-Grip 2078512 - 12 inch groove Joint Pliers have right angle teeth to grip in all directions for maximum bite. The jaws are machined for maximum gripping strength. The pliers also have ProTouch grips that have molded handles for comfort and create less hand fatigue. All pliers meet or exceed ANSI specification. Features Right angle teeth grip in all directions Machined Jaws ProTouch Grips 12 Inch A brand you trust - Vise Grip.
    **** PRICE: USD 22
    Manufacturer : Vise Grip
    SKU: EGLE2325
    UPC:
    Tags: Vise Grip

    Start of page

    Vise Grip 2078510 10 Inch Groove Joint Pliers
    Vise Grip 2078510 10 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .A full line of Irwin Vise-Grip Professional Pliers including the Innovative New grooveLock Pliers Features Durable nickel chromium steel construction ProTouch grips provide extra comfort and reduces hand fatigue Right angle teeth grip in all directions for Maximum bite Meets or exceeds ANSI specifications Item 2078500 has a smooth jaw finish.
    **** PRICE: USD 20
    Manufacturer : Vise Grip
    SKU: EGLE2324
    UPC: 385480282620
    Tags: Vise Grip

    Start of page

    Vise Grip 2078508 8 Groove Joint Pliers
    Vise Grip 2078508 8 groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .The IRWIN Vise-Grip 2078508 - 8 inches groove Joint Pliers have right angle teeth to grip in all directions for maximum bite. The jaws are machined for maximum gripping strength. The pliers also have ProTouch grips that have molded handles for comfort and create less hand fatigue. All pliers meet or exceed ANSI specification. Features Right angle teeth grip in all directions Machined Jaws ProTouch Grips 8 inches A brand you trust - Vise Grip.
    **** PRICE: USD 14
    Manufacturer : Vise Grip
    SKU: EGLE2323
    UPC: 385480282550
    Tags: Vise Grip

    Start of page

    Vise Grip 2078310 10 Inch Crimper with Pro Touch Grips
    Vise Grip 2078310 10 Inch Crimper with Pro Touch Grips
    Housewares>Tools>Cutting, Stripping, and Crimping Tools
    Product Catalog
    Description : .Irwin Industrial Tools 2078310 10-Inch Crimper - Forged - with ProTouch Grips. A full line of Irwin Vise-Grip Professional Pliers including the Innovative New grooveLock Pliers. Features Designed for crimping insulated and non-insulated connections and terminals on 10-22 AWG wire ProTouch grips provide extra comfort and reduces hand fatigue.
    **** PRICE: USD 27
    Manufacturer : Vise Grip
    SKU: EGLE2314
    UPC: 385480885010
    Tags: Vise Grip

    Start of page

    Vise Grip 2078708 5 Piece ProPliers Kitbag Set
    Vise Grip 2078708 5 Piece ProPliers Kitbag Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Vise-Grip 2078708.
  • Professional-grade tools.
  • ProTouch grips provide extra comfort and reduces hand fatigue.
  • Pliers are constructed of high quality materials to provide exceptional durability.
  • Induction hardened cutting edge stays sharper longer.
  • Machined jaws for maximum gripping strength.
  • The machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longer.
  • Rust-resistant finish.
  • 6 Slip Joint Pliers.
  • 6 Diagonal Cutting Pliers.
  • 8 Linemans Pliers.
  • 10 Adjustable Wrench.
  • 10 groove Joint Pliers.
  • Comes with a storage bag..
    **** PRICE: USD 60
    Manufacturer : Vise Grip
    SKU: EGLE2334
    UPC:
    Tags: Vise Grip

    Start of page

    Vise Grip 2078328 8 Inch Cable Cutting Pliers
    Vise Grip 2078328 8 Inch Cable Cutting Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .A full line of Irwin Vise-Grip Professional Pliers including the Innovative New grooveLock Pliers. Features Durable nickel chromium steel construction ProTouch grips provide extra comfort and reduces hand fatigue Cuts Copper and Aluminum wire Induction hardened cutting edge stays sharper - longer Meets or exceeds ANSI specifications.
    **** PRICE: USD 25
    Manufacturer : Vise Grip
    SKU: EGLE2318
    UPC: 385480282240
    Tags: Vise Grip

    Start of page

    Vise Grip 2078712 8 Piece GrooveLock ProPliers Set
    Vise Grip 2078712 8 Piece grooveLock ProPliers Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Irwin Industrial Tools 2078712 8-Piece grooveLock and ProPliers Kitbag Set - 8-Inch 10-Inch 12-Inch grooveLock 10-Inch Adjustable Wrench 8-Inch Long Nose 8-Inch Linemans 6-Inch Diagonal and 6-Inch Slip Joint. A wide variety of set including both pliers and wrenches Features Press and slide button quickly adjusts lower jaw All purpose jaw grips on round - flat - square and hex shapes More groove positions provide the optimum hand location for a better grip on the work piece ProTouch Grips provide extra comfort and reduces hand fatigue Ratcheting action allows grooveLock to be adjusted from the open position up to the work piece by pushing the handle up - no need to press the button.
    **** PRICE: USD 109
    Manufacturer : Vise Grip
    SKU: EGLE2335
    UPC: 038548040851
    Tags: Vise Grip

    Start of page

    Lisle 32500 Tailpipe Expander 1-.625 - 2-.4375 Inch
    Lisle 32500 Tailpipe Expander 1-.625 - 2-.4375 Inch
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .Removes clamp grooves and round out pipes Practical - rugged tool that make easy work of a tough job Works with wrench or impact tool Fits 1-.625 to 2-.4375.
    **** PRICE: USD 41
    Manufacturer : Lisle
    SKU: EGLE1585
    UPC: 083045325000
    Tags: Lisle

    Start of page

    Lisle 32750 Tailpipe Expander 2.375 - 3.25 Inch
    Lisle 32750 Tailpipe Expander 2.375 - 3.25 Inch
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .Removes clamp grooves and round out pipes Practical - rugged tool that make easy work of a tough job Works with wrench or impact tool Fits 2-.375in to 3-.25in.
    **** PRICE: USD 62
    Manufacturer : Lisle
    SKU: EGLE1586
    UPC: 083045327509
    Tags: Lisle

    Start of page

    Mayhew MAY11300 3/4 x 5/8 x 6-1/4 Rivet Buster
    Mayhew MAY11300 3/4 x 5/8 x 6-1/4 Rivet Buster
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • For making a V-shaped groove in metal.
  • Cuts 3/4.
  • Top Quality - manufactured to the highest specifications.
  • Satisfaction ensured..
    **** PRICE: USD 23
    Manufacturer : Mayhew
    SKU: DOBA9035
    UPC: 045256113005
    Tags: Mayhew

    Start of page

    Mastercool MSC70027 Mini Pro Tubing Cutter
    Mastercool MSC70027 Mini Pro Tubing Cutter
    Housewares>Tools>Cutting, Stripping, and Crimping Tools
    Product Catalog
    Description : .MSC70027MASTERCOOL tube cutterFeatures & Benefits: Mastercool tube cutters are lightweight yet durable. Carbide steel cutting wheels work with hard and soft copper aluminum brass thin wall steel and stainless steel. All cutters feature rollers with flare cut-off grooves to salvage as much old tubing material as possible. Mini Tube Cutter Heavy duty mini cutter designed to work in tight quarters. Excellent for limited working space. Highly polished chrome plating is corrosion resistant. Carbide wheel cuts hard soft copper aluminum brass thin wall steel and stainless steel. 70027 Mini Tube Cutter for 1/8in. to 5/8in. (4-15 mm) O.D. tubing(1/8in.-1/2in. nominal)..
    **** PRICE: USD 19
    Manufacturer : Mastercool
    SKU: DOBA8942
    UPC: 700376700275
    Tags: Mastercool

    Start of page

    KD Tools KDT82103 4 Piece GearWrench Standard Plier Set
    KD Tools KDT82103 4 Piece GearWrench Standard Plier Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits Curved back handles - Added Leverage and less slippage Solid flush rivet - Better Access and Tighter Tolerance Slim head design - Access Exclusive rounded inside edges Includes 9.5 Tongue and groove Plier 7 Diagonal Cutting Plier 8 Long Nose Plier and 8 Slip Joint Plier 4 Piece Standard Pliers Set includes 9.5 Tongue and groove Plier 7 Diagonal Cutting Plier 8 Long Nose Plier and 8 Slip Joint Plier packaged on a card.
    **** PRICE: USD 87
    Manufacturer : KD Tools
    SKU: DOBA7700
    UPC: 099575821035
    Tags: KD Tools

    Start of page

    Martin Tools MRT162FG Shrinking Hammer with Fiberglass Handle
    Martin Tools MRT162FG Shrinking Hammer with Fiberglass Handle
    Housewares>Tools>Hammers
    Product Catalog
    Description : .Features and Benefits: Round serrated face is 1-1/4 diameter Square face is 1-1/8 x 1-1/8 Cross-grooved face for shrinking sheet metal Plain square face for flattening Made in the USAMartin auto body tools are the choice of professionals because of their superior quality. This Martin hammer features a precise-ground head with excellent balance the proper weight and a fiberglass handle. Fiberglass handles are becoming popular because of their comfortable grip and ability to absorb shock. All Martin Tools carry a limited lifetime warranty..
    **** PRICE: USD 81
    Manufacturer : Martin Tools
    SKU: DOBA8886
    UPC: 697950394848
    Tags: Martin Tools

    Start of page

    Martin Tools MRT153S Chisel Shrinking Hammer
    Martin Tools MRT153S Chisel Shrinking Hammer
    Housewares>Tools>Hammers
    Product Catalog
    Description : .Features and Benefits: Made with a solid hickory handle 1-9/16 diameter face and 3 long cross chisel Limited lifetime warranty Made in the USACross-grooved face for shrinking sheet metal and cross chisel end for straightening trim pieces or forming metal in tight corners. Available with solid hickory handle only 1-9/16 diameter face and 3 long cross chisel. This 14 oz. is the choice of professionals because of their superior quality. Martin Hammers feature precise-ground heads with excellent balance the proper weight and a tough handle..
    **** PRICE: USD 66
    Manufacturer : Martin Tools
    SKU: DOBA8896
    UPC:
    Tags: Martin Tools

    Start of page

    Lisle LIS19380 Spark Indicator
    Lisle LIS19380 Spark Indicator
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • Tests spark plugs spark plug wires and coils without puncturing the wire.
  • With the engine running place the grooved end of the tool over the plug wire.
  • The bulb will flash to indicate spark..
    **** PRICE: USD 20
    Manufacturer : Lisle
    SKU: DOBA8662
    UPC: 083045193807
    Tags: Lisle

    Start of page

    Knipex KNP8701-10 10 Inch Cobra Tongue and Groove Pliers
    Knipex KNP8701-10 10 Inch Cobra Tongue and groove Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Box joint construction A new generation of water pump pliers for easier and more secure workingPress button action for fast and firm adjustment directly on the work pieceSelected jaw opening is positively ensured. 11-position adjustmentSingle hand adjustmentSelf-gripping on pipes and nutsThe guard prevents operators fingers being pinchedThe unique jaw design shaped to eliminate nut burring.Ergonomic design gives you power with comfort.Approximately 60 HRC hardness of gripping teeth.Made of chrome vanadium steel and oil hardened..
    **** PRICE: USD 46
    Manufacturer : Knipex
    SKU: DOBA8229
    UPC: 843221003128
    Tags: Knipex

    Start of page

    Knipex KNP8701-7 7 Inch Cobra Tongue and Groove Pliers
    Knipex KNP8701-7 7 Inch Cobra Tongue and groove Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Box joint construction A new generation of water pump pliers for easier and more secure workingPress button action for fast and firm adjustment directly on the work pieceSelected jaw opening is positively ensured. 11-position adjustmentSingle hand adjustmentSelf-gripping on pipes and nutsThe guard prevents operators fingers being pinchedThe unique jaw design shaped to eliminate nut burring.Ergonomic design gives you power with comfort.Approximately 60 HRC hardness of gripping teeth.Made of chrome vanadium steel and oil hardened..
    **** PRICE: USD 49
    Manufacturer : Knipex
    SKU: DOBA8228
    UPC: 843221003111
    Tags: Knipex

    Start of page

    KD Tools KDT82233 GearWrench 33 Inch Indexible Pry Bar
    KD Tools KDT82233 GearWrench 33 Inch Indexible Pry Bar
    Housewares>Tools>Pry Bars
    Product Catalog
    Description : .Features and Benefits Puts the pry bar where you need it for best leverage Exceeds ANSI requirements for proven strength Indexible to over 180 degrees for greater leverage 14 locking positions for unmatched access grooved foot for added tractionGearWrench the leading innovator of Hand Tools introduces the newest and only complete line of indexible pry bars. The new program comes with six new styles in sizes ranging from 8 to 33 in length. The head of the pry bars can be adjusted to 14 different positions for over 180 degrees of use. The indexing feature allows the user to gain more leverage in tight access applications..
    **** PRICE: USD 109
    Manufacturer : KD Tools
    SKU: DOBA7765
    UPC: 099575822339
    Tags: KD Tools

    Start of page

    KD Tools KDT82108 7 Piece GearWrench Mixed Pliers Set
    KD Tools KDT82108 7 Piece GearWrench Mixed Pliers Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits Curved back handles for added leverage and less slippage Finger tipping end texture grips for improved access Exclusive rounded inside edges for comfort Slim recessed handle design Assortment of pliers for most any applicationNew mixed pliers set includes the following: KDT82011- 9.5 Tongue and groove Plier; KDT82012- 7 Diagonal Cutting Plier; KDT82013- 8 Long Nose Plier; KDT82014- 8 Slip Joint Plier; KDT82020- 12 groove Joint Plier with straight jaw; KDT82025- 8 Linesman Plier and KDT82028- 8 End Nipper..
    **** PRICE: USD 136
    Manufacturer : KD Tools
    SKU: DOBA7701
    UPC: 099575821080
    Tags: KD Tools

    Start of page

    Lansky Sharpeners LANLKC03 Standard Sharpening System Kit
    Lansky Sharpeners LANLKC03 Standard Sharpening System Kit
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .Features and Benefits: 3 guide rods Specially formulated honing oil Knife clamp with angle selector Coarse medium and fine honing stones all mounted on exclusive color coded finger-grooved holders to protect fingers. Custom molded carrying case.
    **** PRICE: USD 44
    Manufacturer : LANSKY
    SKU: DOBA8270
    UPC:
    Tags: LANSKY

    Start of page

    K Tool International KTI54012 12 Inch Groove Joint Pliers
    K Tool International KTI54012 12 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Chrome vanadium steel.
  • Chrome finish.
  • Vinyl grips.
  • 12 groove Joint Pliers.
  • Dimensions: 0.3 H x 3.5 W x 14.9 D..
    **** PRICE: USD 27
    Manufacturer : K-Tool International
    SKU: DOBA7156
    UPC: 769622540126
    Tags: K-Tool International

    Start of page

    K Tool International KTI54010 10 Inch Groove Joint Pliers
    K Tool International KTI54010 10 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Can be adjusted to grip or turn objects.
  • Ideal for grasping nuts or pipe.
  • Manufactured from chrome vanadium steel with chrome finish.
  • Ergonomic vinyl handle for user comfort.
  • 10 groove Joint Pliers.
  • Dimensions: 1 H x 4.25 W x 13.75 D..
    **** PRICE: USD 24
    Manufacturer : K-Tool International
    SKU: DOBA7155
    UPC: 769622540102
    Tags: K-Tool International

    Start of page

    K Tool International KTI54006 6 Inch Groove Joint Pliers
    K Tool International KTI54006 6 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Chrome vanadium steel.
  • Chrome finish.
  • Vinyl grips.
  • 6 groove Joint Pliers.
  • Dimensions: 1 H x 3.2 W x 6.3 D..
    **** PRICE: USD 18
    Manufacturer : K-Tool International
    SKU: DOBA7154
    UPC: 769622540065
    Tags: K-Tool International

    Start of page

    E-Z Hook EZHBXEL-36RB 36in. Red / Black Straight Banana Plug Insulated Piercing Probe Set
    E-Z Hook EZHBXEL-36RB 36in. Red / Black Straight Banana Plug Insulated Piercing Probe Set
    Housewares>Tools>Nails & Hooks>Hooks
    Product Catalog
    Description : .
  • Screwdriver style tip.
  • V-groove.
  • Insulated Tip.
  • Compatible with most multimeters.
  • Manufactured to the Highest Quality Available.
  • Design is stylish and innovative.
  • Satisfaction Ensured.
  • Great Gift Idea..
    **** PRICE: USD 47
    Manufacturer : E-Z Hook
    SKU: DOBA5989
    UPC: 999992653755
    Tags: E-Z Hook

    Start of page

    Channellock CHA422 9-1/2 Inch Tongue an Groove V Jaw Pliers
    Channellock CHA422 9-1/2 Inch Tongue an groove V Jaw Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits: Right angle teeth grip in all directions Undercut tongue and groove won t slip PermaLock Fastener eliminates nut and bolt failure Reinforcing edge that minimizes stress breakage CHANNELLOCK BLUE comfort grips Length: 9 1/2 - 240mm Adjustments: 5 Capacity: 1-1/2 - 38mm Curved jawCHANNELLOCK uses high carbon C1080 steel for superior performance on the job and an electric coating for ultimate rust prevention. There was no sacrifice made these have comfort and durability needed to last!.
    **** PRICE: USD 28
    Manufacturer : Channellock
    SKU: DOBA5366
    UPC: 255823008744
    Tags: Channellock

    Start of page

    Channellock CHA431KB 5 Piece Pliers Set in Kit Bag
    Channellock CHA431KB 5 Piece Pliers Set in Kit Bag
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits: Made with high carbon C1080 steel for superior performance on the job and an electronic coating for ultimate rust prevention All included in a roll-up kit bagTo a tradesman having the right tool at his side is as important as his training or experience. CHANNELLOCk pliers are made of high carbon C1080 steel for superior performance on the job and an electronic coating for ultimate rust prevention. This set includes each of the following:CHA430 CHA420 Tongue and groove plier; CHA337 Cutting plier CHA3017 Long Nose plier and CHA526 Slip Joint plier. All made with the CHANNELLOCk BLUE comfort grips..
    **** PRICE: USD 109
    Manufacturer : Channellock
    SKU: DOBA5359
    UPC: 025582540212
    Tags: Channellock

    Start of page

    Channellock CHA442 12 Inch Tongue and Groove Curved Jaw Pliers
    Channellock CHA442 12 Inch Tongue and groove Curved Jaw Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits: Right angle teeth grip in all directions Undercut tongue and groove won t slip PermaLock Fastener eliminates nut and bolt failure Reinforcing edge that minimizes stress breakage CHANNELLOCK BLUE comfort gripsCHANNELLOCK uses high carbon C1080 steel for superior performance on the job and an electric coating for ultimate rust prevention. There was no sacrifice made these have comfort and durability needed to last!.
    **** PRICE: USD 32
    Manufacturer : Channellock
    SKU: DOBA5339
    UPC: 025582301871
    Tags: Channellock

    Start of page

    Channellock CHAGS3 3 Piece Tongue and Groove Plier Set
    Channellock CHAGS3 3 Piece Tongue and groove Plier Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits: Right angle teeth grip in all directions Undercut tongue and groove won t slip Permalock fastener eliminates nut and bolt failure Reinforcing edge that minimizes stress breakage Channellock Blue comfort gripsThis set of three tongue and groove pliers include the following: 6.5 CHA426 9.5 CHA420 and 12 CHA440. All included in a carded packet..
    **** PRICE: USD 80
    Manufacturer : Channellock
    SKU: DOBA5325
    UPC: 025582520180
    Tags: Channellock

    Start of page

    Channellock CHAGLS3 3pc. Groove Joint Plier Set
    Channellock CHAGLS3 3pc. groove Joint Plier Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .This item features: -Special jaw shape accommodates many shapes. -Ergonomically designed offset head for greater leverage. -PermaLock Fastener eliminates nut and bolt failure. -Jaw Shape: Hex Jaw. -Handle Type: Plastic-Dipped. -Material: High Carbon Steel. -Finish: Black.
    .
    **** PRICE: USD 55
    Manufacturer : Channellock
    SKU: DOBA5306
    UPC: 025582520067
    Tags: Channellock

    Start of page

    Vise Grip VGP2078120 20 Inch Groovelock Plier
    Vise Grip VGP2078120 20 Inch groovelock Plier
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits Quick adjusting - Press-N-Slide button adjusts jaw All-Purpose Jaw - grips flat round hex and square surfaces Multi-groove Ratcheting System - allows for precise positioning twice the groove positions of the traditional groove joint pliers ProTouch Grips - molded handles for comfort and less hand fatigue Metal Injection Molding (MIM) - patented techology precision parts deliver strength and exceptional performanceWith patented Metal Injection Molding (MIM) technology these pliers adjust 50 percent faster and have twice the groove positions of standard groove joint pliers. These innovative features allow you to grip work pieces faster and easier than ever before..
    **** PRICE: USD 73
    Manufacturer : Vise Grip
    SKU: DOBA15044
    UPC: 038548088105
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078712 8 Piece GrooveLock / ProPliers Kit Bag Set
    Vise Grip VGP2078712 8 Piece grooveLock / ProPliers Kit Bag Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Set includes one each:8 10 12 in. grooveLock Pliers10 in. Adjustable Wrench8 inch Long Nose Plier8 inch Linesman s Plier6 inch Diagonal Cutter6 inch Slip Joint Plier Durable long-lasting qualityProTouch grip - comfort and reduced hand fatigueRust-resistant finishGV-Quick adjustment - Press-N-Slide button quickly adjusts lower jaw (50 percent faster)Anti-pinch design prevents handles from pinching.
    **** PRICE: USD 137
    Manufacturer : Vise Grip
    SKU: DOBA15035
    UPC: 038548040851
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078116 16 Inch Groovelock Plier
    Vise Grip VGP2078116 16 Inch groovelock Plier
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits Quick adjusting - Press-N-Slide button adjusts jaw All-purpose jaw - grips flat round hex and square surfaces Multi-groove Ratcheting System - allow for precise positioning twice the groove positions of the traditional groove joint plier ProTouch Grips - molded handles for comfort and less hand fatigue Metal Injection Molding (MIM)- patented technology precision parts deliver strength and exceptional performanceWith patented Metal Injection Molding (MIM) technology these pliers adjust 50 percent faster and have twice the groove positions of standard groove joint pliers. These innovative features allow you to grip work pieces faster and easier than ever before..
    **** PRICE: USD 66
    Manufacturer : Vise Grip
    SKU: DOBA15043
    UPC: 038548088099
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078704 3 Pc. ProPliers Set
    Vise Grip VGP2078704 3 Pc. ProPliers Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Set includes one each:6 in. Long Nose6 in. Slip Joint10 in. groove Joint PliersPliers are constructed of high quality materials to provide exceptional durabilityThe machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longerProTouch grips provide extra comfort for less hand fatigueRust-resistant finishProTouch Grips - comfort and reduced hand fatigue.
    **** PRICE: USD 38
    Manufacturer : Vise Grip
    SKU: DOBA15034
    UPC: 038548040769
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078711 3 Pc. GrooveLock Kit Bag Set
    Vise Grip VGP2078711 3 Pc. grooveLock Kit Bag Set
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .Features and Benefits:Includes one each of the following: 8 10 12 inch grooveLock Pliers. The specially engineered all purpose jaw grips round hex square and flat surfaces for incredible versatility. grooveLock pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning-providing superior grip.Quick AdjustmentPress-N-Slide button quickly adjusts lower jaw (50 percent faster)ProTouch Grips - molded handles for comfort and improved gripAnti-pinch design - built in handle stop prevents pinching ones hand.
    **** PRICE: USD 78
    Manufacturer : Vise Grip
    SKU: DOBA14994
    UPC: 038548040844
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078710 3 Pc. GrooveLock Tray Set
    Vise Grip VGP2078710 3 Pc. grooveLock Tray Set
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .Features and Benefits:Set includes one each of the following: 8 10 and 12 inch grooveLock Pliers. The specially engineered all purpose jaw grips round hex square and flat surfaces for incredible versatility. grooveLock pliers are designed with twice the number of groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning. Quick Adjustment - Press-N-Slide button quickly adjusts lower jaw (50 percent faster)ProTouch Grips - molded handles for comfort and improved gripBuilt in handle stop prevents pinching hands.
    **** PRICE: USD 79
    Manufacturer : Vise Grip
    SKU: DOBA15026
    UPC: 038548040837
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078705 4 Piece ProPliers Set
    Vise Grip VGP2078705 4 Piece ProPliers Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:4 Pc. ProPliers Set includes one each6 inch Long Nose Plier6 inch Slip Joint Plier10 inch Adjustable Wrench10 inch groove Joint PlierPliers are constructed of high quality material to provide exceptional durabilityThe machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longerProTouch grips provide extra comfort for less hand fatigueChrome vanadium constructionRust-resistant finish.
    **** PRICE: USD 72
    Manufacturer : Vise Grip
    SKU: DOBA15030
    UPC: 038548040776
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078709 2 Pc GrooveLock Pliers Clamshell Set
    Vise Grip VGP2078709 2 Pc grooveLock Pliers Clamshell Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Set includes one each: 8 in. and 10 in. grooveLock Pliers. The specially engineered all purpose jaw grips round hex square and flat surfaces for incredible versatility. grooveLock pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning-providing superior grip.Quick AdjustmentPress-N-Slide button quickly adjusts lower jaw (50 percent faster)ProTouch Grips - molded handles for comfort and improved gripAnti-pinch design - built in handle stop prevents pinching ones hands.
    **** PRICE: USD 39
    Manufacturer : Vise Grip
    SKU: DOBA15027
    UPC:
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078110 10 Inch Groovelock Plier
    Vise Grip VGP2078110 10 Inch groovelock Plier
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits: 10 in. groovelock quick adjusting all purpose pliers Quick adjusting jaw - easily adjusts to fit multiple sizes Pro touch comfort grips provide durability and comfort Ratcheting jaw action - precise jaw positioning All purpose jaws - works on flat round hex and square work pieces Anti pinch handle design - maximizes firm gripping power.
    **** PRICE: USD 29
    Manufacturer : Vise Grip
    SKU: DOBA14986
    UPC:
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078708 5 Piece ProPliers Kit Bag Set
    Vise Grip VGP2078708 5 Piece ProPliers Kit Bag Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:Set includes one each of the following:6 in. Slip Joint Plier6 in. Diagonal Cutting Plier8 in. Linesman s Plier 10 in. Adjustable Wrench10 in. groove Joint Plier Pliers are constructed of high quality materials to provide exceptional durabilityThe machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longerProTouch grips provide extra comfort for less hand fatigueRust-resistant finish.
    **** PRICE: USD 82
    Manufacturer : Vise Grip
    SKU: DOBA15033
    UPC:
    Tags: Vise Grip

    Start of page

    Vise Grip VGP2078707 4 Piece ProPliers Tray Set
    Vise Grip VGP2078707 4 Piece ProPliers Tray Set
    Housewares>Tools>Pliers
    Product Catalog
    Description : .Features and Benefits:4 Pc. ProPliers Tray Set includes one each:6 inch Diagonal Cutting Plier6 inch Slip Joint Plier8 inch Long Nose Plier10 inch groove Joint PlierPliers are constructed of high quality materials to provide exceptional durabilityThe machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longerProTouch grips provide extra comfort for less hand fatigueChrome Vanadium ConstructionRust-resistant finish.
    **** PRICE: USD 48
    Manufacturer : Vise Grip
    SKU: DOBA15031
    UPC: 038548040790
    Tags: Vise Grip

    Start of page

    Arrow Fasteners T25 T25 Low-Voltage Wire Staple Gun
    Arrow Fasteners T25 T25 Low-Voltage Wire Staple Gun
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • Fits up to 1/4.
  • All steel construction.
  • Durable chrome finish.
  • grooved driving blade.
  • Jam-resistant mechanism.
  • Short-span handle for easy compression.
  • Dimensions: 12 x 10 x 4..
    **** PRICE: USD 50
    Manufacturer : Arrow Fastener
    SKU: PTR25137
    UPC:
    Tags: Arrow Fastener

    Start of page

    STANLEY 020800R FATMAX 4-IN-1 MOBILE WORK STATION
    STANLEY 020800R FATMAX 4-IN-1 MOBILE WORK STATION
    Housewares>Tools>Tool Shop Equipment>Tool Shop Equipment
    Product Catalog
    Description : .
  • 4 storage solutions in one includes toolbox part bins portable tray and oversized lower bin for larger items.
  • Patented tiered cantilever multi-level rolling system allows easy access to all 4 storage areas at the same time.
  • Durable Structural Foam construction.
  • Telescopic handle for easy maneuvering.
  • Easy latch system includes a quick push to close feature.
  • Large front latch that locks the entire unit.
  • Ball bearing slides for smooth operation even under heavy load.
  • V-groove on top of lid holds materials such as lumber and pipes in place for cutting.
  • Extra large heavy duty metal latches with pad lockable eye lets.
  • Extra heavy duty rubber-coated 7 wheels - for maximum stability.
  • Height: 29.
  • Length: 17.
  • Width: 22..
    **** PRICE: USD 145
    Manufacturer : STANLEY
    SKU: PESTYS020800R
    UPC: 076174942101
    Tags: STANLEY

    Start of page

    Roadpro RPS5538 10 Mulit-groove Adjustable Wrench
    Roadpro RPS5538 10 Mulit-groove Adjustable Wrench
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • Comfort Grip Handle.
  • Premium Alloy Steel Construction.
  • Right Angle Teeth Grip in all Directions for Maximum Bite.
  • The Perfect Pliers for Hard to Reach Areas.
  • All Purpose groove Joint Pliers for Truck Shop or Home Use..
    **** PRICE: USD 15
    Manufacturer : Roadpro
    SKU: DAS4499
    UPC: 045464234264
    Tags: Roadpro

    Start of page

    Arrow Fasteners T25 T25 Low-Voltage Wire Staple Gun
    Arrow Fasteners T25 T25 Low-Voltage Wire Staple Gun
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • Fits up to 1/4.
  • All steel construction.
  • Durable chrome finish.
  • grooved driving blade.
  • Jam-resistant mechanism.
  • Short-span handle for easy compression.
  • Dimensions: 12 x 10 x 4..
    **** PRICE: USD 50
    Manufacturer : Arrow Fastener
    SKU: PTR25137
    UPC:
    Tags: Arrow Fastener

    Start of page

    STANLEY 020800R FATMAX 4-IN-1 MOBILE WORK STATION
    STANLEY 020800R FATMAX 4-IN-1 MOBILE WORK STATION
    Housewares>Tools>Tool Shop Equipment>Tool Shop Equipment
    Product Catalog
    Description : .
  • 4 storage solutions in one includes toolbox part bins portable tray and oversized lower bin for larger items.
  • Patented tiered cantilever multi-level rolling system allows easy access to all 4 storage areas at the same time.
  • Durable Structural Foam construction.
  • Telescopic handle for easy maneuvering.
  • Easy latch system includes a quick push to close feature.
  • Large front latch that locks the entire unit.
  • Ball bearing slides for smooth operation even under heavy load.
  • V-groove on top of lid holds materials such as lumber and pipes in place for cutting.
  • Extra large heavy duty metal latches with pad lockable eye lets.
  • Extra heavy duty rubber-coated 7 wheels - for maximum stability.
  • Height: 29.
  • Length: 17.
  • Width: 22..
    **** PRICE: USD 145
    Manufacturer : STANLEY
    SKU: PESTYS020800R
    UPC: 076174942101
    Tags: STANLEY

    Start of page

    Roadpro RPS5538 10 Mulit-groove Adjustable Wrench
    Roadpro RPS5538 10 Mulit-groove Adjustable Wrench
    Housewares>Tools>Hand Tools
    Product Catalog
    Description : .
  • Comfort Grip Handle.
  • Premium Alloy Steel Construction.
  • Right Angle Teeth Grip in all Directions for Maximum Bite.
  • The Perfect Pliers for Hard to Reach Areas.
  • All Purpose groove Joint Pliers for Truck Shop or Home Use..
    **** PRICE: USD 15
    Manufacturer : Roadpro
    SKU: DAS4499
    UPC: 045464234264
    Tags: Roadpro

    Start of page

    Procter & Gamble Commercial PAG3700016944 Swiffer Dusters Refills- 6 Count- Unscented
    Procter & Gamble Commercial PAG3700016944 Swiffer Dusters Refills- 6 Count- Unscented
    Housewares>Cleaning Supplies>dusters
    Product Catalog
    Description : .Swiffer 360 Degree Dusters remove up to 90 percent of allergens from cats dogs and dustmites. Thousands of fluffy fibers clean deep into grooves and crevices to trap and lock dust and allergens better than regular dry cloths. All-around design has 50 percent more fibers than regular Swiffer Dusters allowing it to lock dust away for good..
    **** PRICE: USD 18
    Manufacturer : PG
    SKU: SPRCH16959
    UPC: 037000169444
    Tags: PG

    Start of page

    Flambeau 6089TB 7 Tray - Hip Roof
    Flambeau 6089TB 7 Tray - Hip Roof
    Housewares>Tools>Tool Cases>Tool Organizers
    Product Catalog
    Description : .Keep your tackle and baits organized with this 7 tray hip-roof tackle box!! Largest capacity of any Hip-Roof with unique 7-tray design.

  • Unique 7 tray storage surpasses the storage level of all other 6-tray Hip Roof boxes.
  • Interior hanging bait and tool storage.
  • Up to 59 divisible compartments.
  • Aggressive styling and design.
  • Unique handle locking system.
  • Interlocking tongue-and-groove closure with Drawtite latches.
  • Also includes to beverage holders on the cover of the box.
  • Dimensions - 20 X 11.625 X 10.625.
    **** PRICE: USD 65
    Manufacturer : Flambeau Inc
    SKU: FLMB827
    UPC:
    Tags: Flambeau Inc

    Start of page

    Flambeau 6147TB Front Load Brush Guard
    Flambeau 6147TB Front Load Brush Guard
    Housewares>Tools>Tool Cases>Tool Cases
    Product Catalog
    Description : .Keep your tackle and baits organized with this tackle box!! Superior looks and performance for the fisherman who wants the best!

  • Dual top lid access doors for terminal tackle and hanging baits.
  • Aggressive styling and design.
  • Tongue-and-groove construction.
  • Drawtite latch.
  • Dimensions - 21 X 12.25 X 14.5..
    **** PRICE: USD 64
    Manufacturer : Flambeau Inc
    SKU: FLMB833
    UPC:
    Tags: Flambeau Inc

    Start of page

    Proxxon 37160 Micro Chop Saw KGS 80
    Proxxon 37160 Micro Chop Saw KGS 80
    Housewares>Tools>Hardware
    Product Catalog
    Description : .For clean and safe chop and miter cuts of non-ferrous metals plastics and wood. 1. Saw head moves laterally making it possible to get extremely close to the vise holding the work piece when making the cut affording a vibration-free and burr-free cut. 2. With longitudinal fence stop (overhang 12 / 300 mm). 3. Ergonomically correct grip with integrated switch and saw head release mechanism. 4. Carbide tipped saw blade for non-ferrous metals wood and plastics. Power transfer via quietly operating toothed drive belt. 5. Continuously adjustable (may be tightened in any position) round table mad of pressure-cast aluminum swivels 45° in both directions with positive stops at 15° intervals. 6. Integrated tightening mechanism with self-centering clamps. V-groove for round pieces. Front side groove for clamping thin work pieces. Ideal for miter cuts: Instead of swivelling the saw head the table with clamped down work piece is turned! The laterally moving saw head (Patent DP 103.18.479.1) prevents colliding of the saw blade with the vise jaws. This allows for a minimal gap between the work piece vise and the actual cut which is vibration-free and leaves no burr. Base with round table of pressure-cast aluminum and CNC-machined guides and fittings! By using the longitudinal fence stop (overhang 12 / 300 mm) and counter-rotating the table 2 x 45° one can get the opposite angles for two equally long framing pieces by simply reversing them. Powerful very quiet DC motor. Power transfer via quietly operating toothed drive belt. Complete with Carbide tipped saw blade 3 1/8 x 1/16 x 3/8 (80 x 1.6 x 10 mm) 24 teeth. Technical data: 110 - 120V AC. 200 W. 50/60 Hz. 6000 rpm. Table area 9 x 9 (230 x 230 mm). Weight 12 lb (6 kg). Cutting capacity at 90° (Perpendicular cut): With material thickness up to (in mm and inch) - Maximum material width (in mm and inch) -Maximum round stock d.
    **** PRICE: USD 360
    Manufacturer : Proxxon
    SKU: PXTECH266
    UPC: 4006274371606
    Tags: Proxxon

    Start of page

    Proxxon 28132 Machine Vise MS 4
    Proxxon 28132 Machine Vise MS 4
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Perfect for Bench Drill Machine T B M 115 and Drill Stand M B 140/S.
  • The perfect accessory easy and quick to install.
  • The vise is made of die-cast zinc and has three machined sides.
  • The grooved base fits perfectly the adjustable fence of either Drill Stand M B 140/S or Bench Drill Machine T B M 115.
  • The jaws are 2 wide and 25/64 high and provide horizontal and vertical V-slots for holding round work pieces.
  • The maximum clamping W is 1-11/32.
  • The anvil top with a cast-in hole is optimal for supporting small and fine parts when drilling.
  • Has horizontal and vertical V-slots for holding round work pieces.
  • The top with a cast-in hole is optimal for supporting small and fine parts when drilling..
    **** PRICE: USD 29
    Manufacturer : Proxxon
    SKU: PXTECH217
    UPC: 400627428137
    Tags: Proxxon

    Start of page

    Proxxon 29020 Router Bit Set- 10 pcs.- in wooden box
    Proxxon 29020 Router Bit Set- 10 pcs.- in wooden box
    Housewares>Tools>Tool Sets
    Product Catalog
    Description : .Router Bits: Made from high speed steel with 1/8 (32 mm) shanks inverse ground flutes and maximum speeds up to 30000 rpm in different profiles for optimal results. HSS Router Bit Set in wooden box. Set with 10 profiles (cove corner round straight beading rabbeting plunge core box and V-groove). Note: These router cutters should only be used in machines or accessories such as the Proxxon 37050 MICRO Shaper MT 300 router base OFV or the router table FT 300. Free-hand use of these cutters is extremely dangerous!.
    **** PRICE: USD 51
    Manufacturer : Proxxon
    SKU: PXTECH187
    UPC: 400627429024
    Tags: Proxxon

    Start of page

    Proxxon 28572 Set of karving knives for SGM- 5 pcs.
    Proxxon 28572 Set of karving knives for SGM- 5 pcs.
    Housewares>Tools>Tool Sets
    Product Catalog
    Description : .For routing notches grooves and edges. If you make small boxes frames or furniture this router attachment is the right size tool for you. Made from die-cast aluminum with milled work surfaces. Used to route slots notches grooves edges and profiles with or without the fence or circle attachment (both supplied). The adjustable depth stop provides a selectable travel stroke. The unit may be used free-hand but as well as a drill or horizontal stand. The max. width of cut with fence is 5 7/8 (150 mm) and the circle diameter ranges from 3 7/8 to 15 3/4 (100 to 400 mm). The Router base OFV fits all MICROMOT rotary tool units with 3/4 (20 mm) collar. Note: The Professional Grinder IB/E shown in the picture here is not included! Router Bits Made with tungsten carbit steel tips and with 1/8 (32 mm) shanks inverse ground flutes and maximum speeds up to 30000 rpm in different profiles for optimal results. Straight 1/8 (32 mm). NO 29024 Straight 3/16 (50 mm). NO 29026 Straight 1/4 (65 mm). NO 29028 Core box 1/4 (64 mm). NO 29030 V-groove 90° 1/4 (65 mm). Plunge 1/4 (65/25 mm). NO 29034 Piloted round over R 1/8 (32 mm). NO 29036 Rabbeting 1/8 (64 mm). NO 29038 Beading 3/32 (50 mm). NO 29040 Piloted cove 3/16 (13 mm). NO 29042 Tungsten carbit tiped Router Bit Set in wooden box Set with 10 profiles (cove corner round straight beading rabbeting plunge core box and V-groove). NO 29020 Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300 or the Router Base OFV. Free-hand use of these cutters is extremely dangerous! All new tools come with a 2 year factory warranty..
    **** PRICE: USD 59
    Manufacturer : Proxxon
    SKU: PXTECH157
    UPC: 400627428581
    Tags: Proxxon

    Start of page

    NuMax SFL618 3-in-1 Flooring Stapler/Nailer with Rubber Mallet - White
    NuMax SFL618 3-in-1 Flooring Stapler/Nailer with Rubber Mallet - White
    Housewares>Tools>Power Tools>Power Tools
    Product Catalog
    Description : .The 3 in1 flooring nailer from NuMax is great for the professional and homeowner alike. This nailer is easy to operate and conveniently shoots all three types of flooring fasteners; flooring staples T-Cleats and L-Cleats ranging in size from 11/2 to 2 long. The NuMax nailer has a long handle that provides more comfortable use and interchangeable base plates that allow you to install 1/2 15/32 5/8 19/32 3/4 and 25/32 tongue and groove wood flooring. The NuMax flooring nailer also comes with a white rubber mallet that will not leave marks on your floor oil and wrenches. The NuMax flooring nailer is backed by a one year warranty. The NuMax nailers offer the best option over renting a flooring nailer due to its overall value in the flooring nailer category quickly justifying its cost in relation to rental fees and time lost picking-up and returning the tool. The purchase on a flooring nailer allows you to work at your own pace making sure the job is done right and not in a rush..
    **** PRICE: USD 195
    Manufacturer : NuMax
    SKU: PRMGB015
    UPC: 855629002276
    Tags: NuMax

    Start of page

    Proxxon 28054 Jigsaw blades- special steel- 2 pcs.
    Proxxon 28054 Jigsaw blades- special steel- 2 pcs.
    Housewares>Tools>Hardware
    Product Catalog
    Description : .Router Table FT 300 - ideal for model building picture framing dollhouses and antiques. Note: The professional grinder IB/E shown here is not included. Independently adjustable fence halves assure that even the profiled or machined section slides securely against the out feed part of the fence. The table fits all MICROMOT rotary tools with 3/4 (20 mm) collars. The 11 13/16 x 7 3/32 (300 x 180 mm) table is made of die-cast aluminum and supplied with a mitre gauge. The transparent guard prevents accidental contact with the cutter and the mitre gauge slides in a machined slot. The drive unit is fitted under the table in the 3/4 (20 mm) collar adapter. The depth of the cut is adjustable by means of a knob and the cutter/drive may be tilted up to 45°. This facilitates additional profiles without having to purchase numerous cutters. The complete table is secured to the worktop by four screws. When occasionally using the unit a plate and two clamps should suffice. Independently adjustable fence halves assure that even the profiled or machined section slides securely against the out feed part of the fence. Tungsten carbit tiped Router Bit Set in wooden box Set with 10 profiles (cove corner round straight beading rabbeting plunge core box and V-groove). NO 29 020 Independently adjustable fence halves assure that even the profiled or machined section slides securely against the out feed part of the fence. Straight 1/8 (32 mm) NO 29 024 Straight 3/16 (50 mm) NO 29 026 Straight 1/4 (65 mm) NO 29 028 Core box 1/4 (64 mm) NO 29 030 V-groove 90° 1/4 (65 mm) NO 29 032 Plunge 1/4 (65/25 mm) NO 29 034 Piloted round over R 1/8 (32 mm) NO 29 036 Rabbeting 1/8 (64 mm) NO 29 038 Beading 3/32 (50 mm) NO 29 040 Piloted cove 3/16 (13 mm)&#.
    **** PRICE: USD 11
    Manufacturer : Proxxon
    SKU: PXTECH002
    UPC: 400627428054
    Tags: Proxxon

    Start of page

    Freeman PFBC940 4-In-1 Mini-Flooring Nailer
    Freeman PFBC940 4-In-1 Mini-Flooring Nailer
    Housewares>Tools>Power Tools>Power Tools
    Product Catalog
    Description : .The Freeman PFBC940 4-in-1 Mini Flooring Gun has the ability to fasten T&G flooring and various finishing projects. This nailer is ideal for 1/2 in. and below engineered or solid tongue and groove flooring also great tacking down flooring while glue sets. The PFBC940 is extremely durable and ergonomically designed to provide extra comfort when working on your wood working projects.The PFBC940 quickly converts to a straight 18 gauge brad nailer which can be used for finish molding to complete your flooring project. This nailer/stapler is equipped with a comfort grip handle 360 degrees adjustable exhaust anodized aluminum cylinder anodized aluminum magazine air filter/anti-dust cap tool-free depth adjustment and a reload indicator. The PFBC940 is an Oil-free design that includes oil (which is not necessary; however recommended) goggles and wrenches. Freeman Pneumatic nailers are manufactured under the strict guidelines to ensure professional-grade standards. This nailer is also backed by the Freeman 7 Year Limited Warranty..
    **** PRICE: USD 194
    Manufacturer : FREEMAN
    SKU: PRMGB005
    UPC: 855629002313
    Tags: FREEMAN

    Start of page

    Dixon Valve 238-200-B-BR 2 Andrews Type B Cam and Groove Couplers
    Dixon Valve 238-200-B-BR 2 Andrews Type B Cam and groove Couplers
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Female.
  • Male Thread: 2 (NPT).
  • Female Quick: 2.
  • Operating Pressure: 250.0 psi [Max].
  • Body Material: Brass.
  • Type: Cam & groove Coupler..
    **** PRICE: USD 697
    Manufacturer : Dixon Valve
    SKU: ORSNO11943
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-75-A-SS Stainless Steel Adaptor
    Dixon Valve 238-75-A-SS Stainless Steel Adaptor
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Female.
  • Male Quick: 3/4 in.
  • Female Thread: 3/4 in (NPT).
  • Operating Pressure: 250.0 psi [Max].
  • Body Material: Stainless Steel.
  • Type: Cam & groove Adapter..
    **** PRICE: USD 377
    Manufacturer : Dixon Valve
    SKU: ORSNO39873
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-400-D-AL 4 Andrews Type B Coupler
    Dixon Valve 238-400-D-AL 4 Andrews Type B Coupler
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Female/Female
  • Female Thread: 4 in (NPT)
  • Female Quick: 4 in
  • Operating Pressure: 100.0 psi [Max]
  • Body Material: Aluminum
  • Type: Cam & groove Coupler.
    **** PRICE: USD 62
    Manufacturer : Dixon Valve
    SKU: ORSNO22677
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-300-C-AL 3 Andrews Type C Cam and Groove Couplers
    Dixon Valve 238-300-C-AL 3 Andrews Type C Cam and groove Couplers
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Female.
  • Male Barb/Hose: 3 in.
  • Female Quick: 3 in.
  • Operating Pressure: 125.0 psi [Max].
  • Body Material: Aluminum.
  • Type: Cam & groove Coupler..
    **** PRICE: USD 51
    Manufacturer : Dixon Valve
    SKU: ORSNO16648
    UPC:
    Tags: Dixon Valve

    Start of page

    Irwin Vise-Grip 586-2078712 8 Pc Groovelock Plierssets
    Irwin Vise-Grip 586-2078712 8 Pc groovelock Plierssets
    Housewares>Tools>Pliers
    Product Catalog
    Description : .groovelock Plierssets.

  • Includes: 8 10 12 in. groovelocks 10 in. Adjustable Wrench 8 in. Long Nose Pliers 8 in. Linesman Pliers 6 in. Diagonal Cutter Pliers 6 in. Slip Joint Pliers Pouch..
    **** PRICE: USD 124
    Manufacturer : Irwin Vise-Grip
    SKU: ORSNO12546
    UPC: 038548040851
    Tags: Irwin Vise-Grip

    Start of page

    Dixon Valve 238-300-F-AL 3 Andrews and Boss - Lock Type F Adaptor
    Dixon Valve 238-300-F-AL 3 Andrews and Boss - Lock Type F Adaptor
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Male.
  • Male Thread: 3 (NPT).
  • Male Quick: 3.
  • Operating Pressure: 125.0 psi [Max].
  • Body Material: Aluminum.
  • Type: Cam and groove Adapter..
    **** PRICE: USD 36
    Manufacturer : Dixon Valve
    SKU: ORSNO16655
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-300-B-AL 3 Andrews Type B Cam and Groove Couplers
    Dixon Valve 238-300-B-AL 3 Andrews Type B Cam and groove Couplers
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Female.
  • Male Thread: 3 in (NPT).
  • Female Quick: 3 in.
  • Operating Pressure: 125.0 psi [Max].
  • Body Material: Aluminum.
  • Type: Cam & groove Coupler..
    **** PRICE: USD 48
    Manufacturer : Dixon Valve
    SKU: ORSNO16647
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-200-F-AL 2 Andrews and Boss - Lock Type F Adaptor
    Dixon Valve 238-200-F-AL 2 Andrews and Boss - Lock Type F Adaptor
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Male.
  • Male Thread: 2 in (NPT).
  • Male Quick: 2 in.
  • Operating Pressure: 250.0 psi [Max].
  • Body Material: Aluminum.
  • Type: Cam & groove Adapter..
    **** PRICE: USD 22
    Manufacturer : Dixon Valve
    SKU: ORSNO11953
    UPC:
    Tags: Dixon Valve

    Start of page

    Dixon Valve 238-200-A-AL 2 Inch Cam & Groove Adapter
    Dixon Valve 238-200-A-AL 2 Inch Cam & groove Adapter
    Housewares>Tools>Hardware
    Product Catalog
    Description : .
  • Connection Type: Male/Female.
  • Male Quick: 2 in.
  • Female Thread: 2 in (NPT).
  • Operating Pressure: 250.0 psi [Max].
  • Body Material: Aluminum.
  • Packing Type: Cam & groove Adapter..
    **** PRICE: USD 152
    Manufacturer : Dixon Valve
    SKU: ORSNO11940
    UPC:
    Tags: Dixon Valve

    Start of page

    Weiler 804-21109 Ds-5-8 .0085-8In Dia P
    Weiler 804-21109 Ds-5-8 .0085-8In Dia P
    Housewares>Tools>Abrasives
    Product Catalog
    Description : .Also known as internal brushes Weilers comprehensive line of power and hand tube brushes provide fast efficient cleaning and finishing of hard-to-reach areas such as internal diameters crevices threaded surfaces and other difficult-to-access areas.

    Brushes are available in many configurations and fill materials such as steel Type 302 stainless steel brass horsehair nylon and tampico.

  • Deburring and cleaning drilled holes and internal threads.
  • Cleaning and finishing internal diameters of pipes and tubes.
  • Deburring and cleaning internal keyways and grooves.
  • Carbon removal.
  • Crosshole deburring.
  • Wire Material: Steel.
  • Dia.: 1/2.
  • Wire Size: 0.0060.
  • Brush Length: 2.
  • Stem Diam: 5/32.
  • Length: 5.
  • Applications: Cleaning Deburring.
  • Type: Tube Brush.
  • Used With: Power Tools..
    **** PRICE: USD 17
    Manufacturer : Weiler Corporation
    SKU: ORSNO12964
    UPC: 012382211097
    Tags: Weiler Corporation

    Start of page

    Empire Level 272-581-9 9 Inch Magnetic Torpedo Level
    Empire Level 272-581-9 9 Inch Magnetic Torpedo Level
    Housewares>Tools>Measuring Tools and Templates>Levels
    Product Catalog
    Description : .
  • Length: 9.
  • Number of Vials: 3.
  • Vial Positions: 1-45° 1 Level 1 Plumb.
  • Vial Material: Plastic.
  • Base Type: grooved Magnetic.
  • Structure: I-Beam.
  • Body Material: Aluminum.
  • Brand Name: Unitek.
  • Type: Torpedo Spirit Level..
    **** PRICE: USD 15
    Manufacturer : Empire Level Manufacturing Co
    SKU: ORSNO32608
    UPC: 015812058194
    Tags: Empire Level Manufacturing Co

    Start of page

    Empire Level 272-331-9 9 Inchmagnetic Torpedo Level
    Empire Level 272-331-9 9 Inchmagnetic Torpedo Level
    Housewares>Tools>Measuring Tools and Templates>Levels
    Product Catalog
    Description : .9Magnetic Torpedo Level.

  • Length: 9.
  • No. of Vials: 3.
  • Vial Positions: 1 45° 1 Level 1 Plumb.
  • Vial Material: Plastic.
  • Base Type: grooved Magnetic.
  • Structure: I-Beam.
  • Body Material: Plastic.
  • Brand Name: Polycast.
  • Type: Torpedo Spirit Level..
    **** PRICE: USD 13
    Manufacturer : Empire Level Manufacturing Co
    SKU: ORSNO19288
    UPC: 015812033191
    Tags: Empire Level Manufacturing Co

    Start of page

    Empire Level 272-84-5  Pocket Level
    Empire Level 272-84-5 Pocket Level
    Housewares>Tools>Measuring Tools and Templates>Levels
    Product Catalog
    Description : .
  • No of Vials: 1.
  • Vial Positions: 1 Level.
  • Display Base Type: grooved.
  • Structure: I-Beam.
  • Body Material: Plastic.
  • Measurement Type: Pocket Spirit Level..
    **** PRICE: USD 14
    Manufacturer : Empire Level Manufacturing Co
    SKU: ORSNO41972
    UPC: 015812008458
    Tags: Empire Level Manufacturing Co

    Start of page

    Procter And Gamble PGC 16449 Mr. Clean Magic Eraser Extra Power
    Procter And Gamble PGC 16449 Mr. Clean Magic Eraser Extra Power
    Housewares>Cleaning Supplies>miscellaneous cleaners
    Product Catalog
    Description : .Give new life to the grimiest surfaces around your home. Mr. Clean Magic Eraser Extra Power will help you clean your tough messes inside and out. The water activated micro-scrubbers reach into surface grooves lifting away the toughest soils with water alone. Its 50 percent stronger than Magic Eraser Original which means it holds up to tough messes better and lasts longer before you need to replace it. Try Magic Eraser Extra Power on kitchen appliances tiles and grout and even grill grates lawn furniture and more. With such an easy great clean you can get to enjoying your favorite space to the fullest whether thats getting cozy in the kitchen or relaxing in the yard. 30 cleaning pads per case..
    **** PRICE: USD 66
    Manufacturer : Procter & Gamble
    SKU: LGSE5756
    UPC:
    Tags: Procter & Gamble

    Start of page

    GearWrench 329-82220 Extendable Index Pry Bar
    GearWrench 329-82220 Extendable Index Pry Bar
    Housewares>Tools>Pry Bars
    Product Catalog
    Description : .
  • Head locks in 14 positions.
  • Stock Shape: Round.
  • Overall Length: 18 in [Min] 29 in [Max].
  • Tip Type: grooved.
  • Material: Alloy Steel.
  • Finish: Paint.
  • Satisfaction Ensured..
    **** PRICE: USD 106
    Manufacturer : Gearwrench
    SKU: ORSNO41556
    UPC:
    Tags: Gearwrench

    Start of page

    Ampco Safety Tools 065-P-39 9.5 Inch Groove Joint Pliers
    Ampco Safety Tools 065-P-39 9.5 Inch groove Joint Pliers
    Housewares>Tools>Pliers
    Product Catalog
    Description : .
  • Non-sparking.
  • Non-magnetic.
  • Corrosion resistant.
  • Made in the USA.
  • Beryllium-free.
  • Overall Length: 10.
  • Jaw Opening: 1-1/2.
  • Jaw Shape: Straight..
    **** PRICE: USD 161
    Manufacturer : Ampco Safety Tools
    SKU: ORSNO55652
    UPC:
    Tags: Ampco Safety Tools

    Start of page

    DeWalt 115-DW680K Heavy-Duty Planer Kit
    DeWalt 115-DW680K Heavy-Duty Planer Kit
    Housewares>Tools>Power Tools>Power Tools
    Product Catalog
    Description : .Heavy-Duty motor provides a smooth even finish in the hardest of woods .
  • 3/32 (2.5 mm) maximum cut in one pass reduces the amount of passes on your material .
  • Accepts large resharpenable high speed steel blades for straight edging or framing applications .
  • Calibrated Depth Adjustment Knob for accurate depth setting and eliminating the need to re-zero your depth .
  • Also accepts reversible carbide blades for more detailed accurate woodworking .
  • Precision-machined shoe bottom and side provides flat surface finish as well as accurate and square rabbet joints .
  • Kick stand allows you to rest the planer on the material in between passes without gouging your material .
  • Rubber-coated front-height adjustment knob for greater comfort and better control .
  • Three precision machined grooves in front shoe provide three different sizes for edge chamfering .
  • Poly-V drive belt provides increased belt durability .
  • Ergonomically designed two finger trigger for increased comfort and less user fatigue.
    **** PRICE: USD 280
    Manufacturer : DeWalt
    SKU: ORSNO50185
    UPC: 28875106801
    Tags: DeWalt

    Start of page

    Ridgid 632-56672 Roller Head High Pipe Stand