Technical English - Spanish Vocabulary.

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z

 

 


Custom Search

 

 

 



SEARCH :radiator



VIAIR 2On2 400C System - 30001
VIAIR 2On2 400C System - 30001
Vehicles & Parts > Vehicle Parts & Accessories > V
ATG_SKU_4WD_data_feed
Description : .150 PSI;Two 400C compressors;Kit includes 2 air compressors, 2 gallon six port air tank, power connectors, wiring harness, air manifold, safety valve, pressure switch and mounting hardware;California Residents: WARNING VIAIR 2On2 Systems allow the installation of a capable dual compressor onboard air system in 2007-2011 Jeep JKs which mounts between the radiator and engine, uses no additional space. 2On2 Systems are Plug & Play and provide a simplified installation of your onboard air system, without the need to find space under your rig, where components can be damaged. Available either as a JK-specific item (with cross member mounting bracket), or as a universal kit that must be installed inside your vehicle, all VIAIR 2On2. Kits include: 2 air compressors, a 2 gallon six port air tank, Environmentally-sealed power connectors, Wiring harness, Air manifold, Safety valve, Pressure switch and Mounting hardware..
**** PRICE: 767
Manufacturer : VIAIR
SKU: 818114003110
UPC: 30001
Tags: - .

Start of page

VIAIR 2On2 380C System - 30005
VIAIR 2On2 380C System - 30005
Vehicles & Parts > Vehicle Parts & Accessories > V
ATG_SKU_4WD_data_feed
Description : .200 PSI;Two 380C compressors;Kit includes 2 air compressors, 2 gallon six port air tank, power connectors, wiring harness, air manifold, safety valve, pressure switch and mounting hardware;California Residents: WARNING VIAIR 2On2 Systems allow the installation of a capable dual compressor onboard air system in 2007-2011 Jeep JKs which mounts between the radiator and engine, uses no additional space. 2On2 Systems are Plug & Play and provide a simplified installation of your onboard air system, without the need to find space under your rig, where components can be damaged. Available either as a JK-specific item (with cross member mounting bracket), or as a universal kit that must be installed inside your vehicle, all VIAIR 2On2. Kits include: 2 air compressors, a 2 gallon six port air tank, Environmentally-sealed power connectors, Wiring harness, Air manifold, Safety valve, Pressure switch and Mounting hardware..
**** PRICE: 817
Manufacturer : VIAIR
SKU: 818114003158
UPC: 30005
Tags: - .

Start of page

VP Racing Madditive Cool Down Coolant Additive - 2085
VP Racing Madditive Cool Down Coolant Additive - 2085
Vehicles & Parts > Vehicle Parts & Accessories > V
ATG_SKU_4WD_data_feed
Description : .VP Racing Fuels Madditive 16oz Cool Down Coolant System Additive;Improves performance of coolant in your radiator system;Reduces cylinder head temperatures up to 50 degrees F;Lubricates all vital components;Approved by most race sanctioning bodies;California Residents: WARNING VP Racing Madditive Octanium octane concentrate increases your gasoline octane up to 8 numbers. It’s blended for off-road racing applications and improves throttle response and acceleration, while eliminating knocks and pings. Eliminate gum and varnish build-up, clean fuel injectors, and increase horsepower with Madditive Octanium from the mad scientists at VP racing..
**** PRICE: 11
Manufacturer : VP Racing Fuels
SKU:
UPC: 2085
Tags: - .

Start of page

TeraFlex Epic Front Bumper with Hoop Kit, Center Drum Winch (Black) - 4653230
TeraFlex Epic Front Bumper with Hoop Kit, Center Drum Winch (Black) - 4653230
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Black;1.75 mandrel bent tube guard;Integrated winch mount;Fits all major centered winch models;Allows use of factory fog lights;2012 and newer models require vacuum relocation bracket sold separately, part number TER4403100;California Residents: WARNING The TeraFlex Epic front bumper for the JK Wrangler is designed to offer ultimate rock protection, and match the design styling of the JKs body. The epic front bumper is designed with an integrated winch mount. The bumper features recessed mounting, allowing taller winches to take up less grill space and increase radiator air flow for maximum cooling. This bumper will fit all major winch models with standard offset bolt pattern - including the larger Warn powerplant. A separate bumper is available for centered drum winches - like the Warn zeon. A 1.75 mandrel bent tube guard protects the winch, grill and radiator from potential damage. Integrated d-ring mounts aid with recovery equipment. The epic bumper also allows the use of the factory fog lights to retain factory styling and technology. Note: 2012+ Wranglers require the use of the JK Vacuum Pump Relocation Bracket Kit #4403100..
**** PRICE: 1214
Manufacturer : TeraFlex
SKU: 843885033172
UPC: 4653230
Tags: - .

Start of page

TeraFlex Epic Front Bumper with Hoop Kit, Offset Drum Winch (Black) - 4653130
TeraFlex Epic Front Bumper with Hoop Kit, Offset Drum Winch (Black) - 4653130
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Black;1.75 mandrel bent tube guard;Integrated winch mount;Fits all major winch models with offset bolt pattern;Allows use of factory fog lights;2012 and newer models require vacuum relocation bracket sold separately, part number TER4403100;California Residents: WARNING The TeraFlex Epic front bumper for the JK Wrangler is designed to offer ultimate rock protection, and match the design styling of the JKs body. The epic front bumper is designed with an integrated winch mount. The bumper features recessed mounting, allowing taller winches to take up less grill space and increase radiator air flow for maximum cooling. This bumper will fit all major winch models with standard offset bolt pattern - including the larger Warn powerplant. A separate bumper is available for centered drum winches - like the Warn zeon. A 1.75 mandrel bent tube guard protects the winch, grill and radiator from potential damage. Integrated d-ring mounts aid with recovery equipment. The epic bumper also allows the use of the factory fog lights to retain factory styling and technology. Note: 2012+ Wranglers require the use of the JK Vacuum Pump Relocation Bracket Kit #4403100..
**** PRICE: 1214
Manufacturer : TeraFlex
SKU: 843885033264
UPC: 4653130
Tags: - .

Start of page

TeraFlex Epic Front Bumper (Black) - 4653200
TeraFlex Epic Front Bumper (Black) - 4653200
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Integrated winch mount;Recessed mounting for taller winches;Will fit centered winches - including the Warn Zeon;D-Ring mounts aid with recovery equipment;Allows the use of the factory fog lights to retain factory styling and technology;Note: 2012+ Wranglers require the use of the JK Vacuum Pump Relocation Bracket Kit part number TER4403100;California Residents: WARNING The TeraFlex JK Epic front bumper for the JK Wrangler is designed to offer ultimate rock protection, and match the design styling of the JKs body. The Epic front bumper is designed with an integrated winch mount. The bumper features recessed mounting, allowing taller winches to take up less grill space to increase radiator air flow for maximum cooling. This bumper will fit centered winches - including the Warn Zeon. A separate bumper is available for standard offset drum winches. Integrated D-Ring mounts aid with recovery equipment. The Epic bumper also allows the use of the factory fog lights to retain factory styling and technology. Note: 2012+ Wranglers require the use of the JK Vacuum Pump Relocation Bracket Kit #4403100..
**** PRICE: 1002
Manufacturer : TeraFlex
SKU: 00843885031437
UPC: 4653200
Tags: - .

Start of page

Trail Gear Power Steering Cooler - 130516-1
Trail Gear Power Steering Cooler - 130516-1
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Non-vehicle specific;Fin area of 9 X 8;Mounting hardware included;California Residents: WARNING If you’re running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating. Our cooler features a fin area of 9 X 8 and does a great job of keeping the steering fluid temps under control in all conditions. Mounting kit is included with the oil cooler..
**** PRICE: 107
Manufacturer : Trail Gear
SKU:
UPC: 130516-1
Tags: - .

Start of page

Skid Row Off Road Radiator Guard (Black) - JP-0015
Skid Row Off Road radiator Guard (Black) - JP-0015
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .1/8 inch thick steel;Black powder coat;Easily installed protection for vulnerable lower radiator tank;Drilling of one hole required;Made in the USA;California Residents: WARNING Skid Rows radiator Guard for 1997-2006 Jeep Wranglers provides easily installed protection for the plastic and vulnerable lower radiator tank. Drilling of one hole required..
**** PRICE: 74
Manufacturer : Skid Row Off Road
SKU: 609224069819
UPC: JP-0015
Tags: - .

Start of page

Synergy Manufacturing Jeep JK Air Tank Mount - 4024
Synergy Manufacturing Jeep JK Air Tank Mount - 4024
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Designed for mounting 2 Gallon air compressor tank between the radiator and engine on Jeep JK;Kit contains 2 brackets and all mounting hardware;Compatible with Viair 2.0 Gallon Air Tank (VIAIR-91022);Not compatible with Teraflex JK Front Track Bar;Made in the U.S.A;California Residents: WARNING Provides a simple and convenient mounting place for a 2 gallon air tank in your crowded JK engine compartment..
**** PRICE: 67
Manufacturer : Synergy Manufacturing
SKU: 700006615061
UPC: 4024
Tags: - .

Start of page

Rugged Ridge Bug Screen (Stainless Steel) - 11106.01
Rugged Ridge Bug Screen (Stainless Steel) - 11106.01
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Stainless Steel;Accessories include all mounting hardware;California Residents: WARNING Protect your front grille from bugs and debris with this stainless steel weather resistant radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling. All necessary hardware included..
**** PRICE: 84
Manufacturer : Rugged Ridge
SKU: 00804314001209
UPC: 11106.01
Tags: - .

Start of page

Rugged Ridge Bug Screen (Stainless Steel) - 11106.02
Rugged Ridge Bug Screen (Stainless Steel) - 11106.02
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Stainless Steel;Accessories include all mounting hardware;California Residents: WARNING Protect your front grille from bugs and debris with this stainless steel weather resistant radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling. All necessary hardware included..
**** PRICE: 80
Manufacturer : Rugged Ridge
SKU: 00804314001469
UPC: 11106.02
Tags: - .

Start of page

Rugged Ridge Bug Screen (Stainless Steel) - 11106.03
Rugged Ridge Bug Screen (Stainless Steel) - 11106.03
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Stainless Steel;Accessories include all mounting hardware;California Residents: WARNING Protect your front grille from bugs and debris with this stainless steel weather resistant radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling. All necessary hardware included..
**** PRICE: 80
Manufacturer : Rugged Ridge
SKU: 00804314001452
UPC: 11106.03
Tags: - .

Start of page

Rugged Ridge Bug Screen (Black) - 11213.01
Rugged Ridge Bug Screen (Black) - 11213.01
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Black;Accessories include all mounting hardware;California Residents: WARNING Protect your front grille from bugs and debris with this durable black radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling. Includes all necessary hardware ..
**** PRICE: 41
Manufacturer : Rugged Ridge
SKU: 00804314002022
UPC: 11213.01
Tags: - .

Start of page

Rugged Ridge Bug Screen (Black) - 11213.03
Rugged Ridge Bug Screen (Black) - 11213.03
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Black;Accessories include all mounting hardware;Drilling required;California Residents: WARNING Protect your front grille from bugs and debris with these durable black powder-coated radiator bug shields by Rugged Ridge. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling..
**** PRICE: 51
Manufacturer : Rugged Ridge
SKU: 00804314002114
UPC: 11213.03
Tags: - .

Start of page

Rugged Ridge Bug Screen (Black) - 11213.02
Rugged Ridge Bug Screen (Black) - 11213.02
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Black powder coat;Accessories include all mounting hardware;California Residents: WARNING Protect your front grille from bugs and debris with this durable black radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling..
**** PRICE: 41
Manufacturer : Rugged Ridge
SKU: 00804314002060
UPC: 11213.02
Tags: - .

Start of page

Rugged Ridge Grille Inserts - Black Mesh - 11306.31
Rugged Ridge Grille Inserts - Black Mesh - 11306.31
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Black mesh;Protects radiator from heavy debris;Minimal drilling required;Hardware included;Limited 5 Year Warranty;California Residents: WARNING Add a bold performance-inspired look to your 2007-2017 Wrangler JK with Rugged Ridge Perforated Grille Inserts. Each insert features an inlay detailed with 7 mm perforations that is an aggressive accent to any front end. Constructed of durable UV-treated space age plastic that resists fading, cracking, and warping for years of good looks, these Mesh Grille Inserts are molded for a precise custom fit and an easy installation with no drilling or tools required..
**** PRICE: 51
Manufacturer : Rugged Ridge
SKU: 804314296094
UPC: 11306.31
Tags: - .

Start of page

Rugged Ridge Spartacus Front Bumper Overrider - 11544.22
Rugged Ridge Spartacus Front Bumper Overrider - 11544.22
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;2.5-inch diameter tubular steel construction;Provides extra protection for your grille and radiator;Bolt-on design;California Residents: WARNING Upgrade the look of any Spartacus Front Bumper on Wrangler JL or Gladiator JT models with Rugged Ridge Spartacus Overrider. With its muscular 2.5-inch diameter tubular steel construction, you’ll value the extra protection for your grille and radiator almost as much as the way it accents what is already one of the most impressive bumpers around. The simple bolt-on design features a slightly angled profile so it can be reversed for a tailored look. In addition, the Spartacus Front Bumper Overrider is an ideal location for mounting off-road lights or action cameras, when paired with our versatile X-Clamp Mounting System (Part No. 11030.01/ 11030.10 / 11030.40)..
**** PRICE: 170
Manufacturer : Rugged Ridge
SKU:
UPC: 11544.22
Tags: - .

Start of page

Rugged Ridge Arcus Front Bumper Tube Overrider - 11549.03
Rugged Ridge Arcus Front Bumper Tube Overrider - 11549.03
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .18-Current Wrangler JL, 2 & 4 Door;Accent to the Arcus Front Bumper;Protection for both grille and radiator;Practical location for mounting off-road lights or trail cameras;Built from high-strength tube steel;Matching satin black powder coat finish for superior resistance from rust and corrosion;Installs easily with the included hardware;California Residents: WARNING The Rugged Ridge Arcus Front Bumper Overrider is a rugged accent to the Arcus Front Bumper (11549.01), giving added protection for both grille and radiator and a practical location for mounting off-road lights or trail cameras. Each overrider is built from high-strength tube steel and finished with a matching satin black powder coat for superior resistance from rust and corrosion. Installs easily with the included hardware..
**** PRICE: 100
Manufacturer : Rugged Ridge
SKU:
UPC: 11549.03
Tags: - .

Start of page

Rugged Ridge Arcus Front Bumper Set with Overrider Bar - 11549.05
Rugged Ridge Arcus Front Bumper Set with Overrider Bar - 11549.05
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .18-Current Wrangler JL, 2 & 4 Door;Includes Arcus front bumper with winch tray, tow hooks and tube overrider;Protection for both grille and radiator;Practical location for mounting off-road lights or trail cameras;Built from high-strength tube steel;Matching satin black powder coat finish for superior resistance from rust and corrosion;Installs easily with the included hardware;California Residents: WARNING The Rugged Ridge Arcus Front Bumper Overrider is a rugged accent to the Arcus Front Bumper (11549.01), giving added protection for both grille and radiator and a practical location for mounting off-road lights or trail cameras. Each overrider is built from high-strength tube steel and finished with a matching satin black powder coat for superior resistance from rust and corrosion. Installs easily with the included hardware..
**** PRICE: 500
Manufacturer : Rugged Ridge
SKU:
UPC: 11549.05
Tags: - .

Start of page

Rugged Ridge XHD Stinger Guard, Steel - RUG11540.29
Rugged Ridge XHD Stinger Guard, Steel - RUG11540.29
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .2 and 4-door models;Constructed of high-strength stamped steel;Durable textured black Powdercoat;Works with XHD Stinger part number 11540.13;California Residents: WARNING The Rugged Ridge XHD Stinger Guard is the ideal complement to the XHD Stinger (11540.13). Constructed of high-strength stamped steel, the guard is contoured to match the dimensions of the XHD Stinger, adding a muscular, off-road accent to the XHD bumper. Finished with a durable textured black powder coat, the Stinger Guard allows full use of the winch retaining hook, when properly installed. Each Guard receives eight elongated relief cuts on the primary panel that allow for increased cooling airflow while still protecting the radiator and grill from off-road hazards..
**** PRICE: 61
Manufacturer : Rugged Ridge
SKU: 804314289577
UPC: 11540.29
Tags: - .

Start of page

Smittybilt SRC Gen2 Front Bumper (Black) - 76724
Smittybilt SRC Gen2 Front Bumper (Black) - 76724
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;New max solid d-ring and jack point mount - welded on the inside and out;Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions;Fender to fender protection;2 120 Wall over rider and kickers;Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch;O.E. fog light provision;Manufactured from 3/16 cold rolled steel;Towable D-ring mounts;Two-stage textured matte black powdercoat finish with 5-year limited warranty;Smittybilt Advantage limited lifetime warranty;California Residents: WARNING The new Smittybilt SRC front bumper has been completely redesigned with more aggressive styling and heavy duty features. The new bumper features an integrated over-rider bar and corners that extend to match the factory fender line for greater protection. The redesigned solid D-ring mounts feature an integrated recovery point for easy access. The winch plate has been placed lower for greater airflow to the radiator..
**** PRICE: 600
Manufacturer : Smittybilt
SKU: 00631410124132
UPC: 76724
Tags: - .

Start of page

Smittybilt Gen 2 XRC Front Bumper - 77807
Smittybilt Gen 2 XRC Front Bumper - 77807
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Two-stage light texture black finish;Solid d-ring and jack point mount;Aggressive design with raised corners for better entry and exit angles;2 .120 wall over rider with kickers;Recessed winch plate allows for greater air flow and accomodates up to 12k winch;O.E. fog light provision (excluding lights supplied with metal Rubicon front bumpers);Manufactured from 3/16 cold rolled steel;5-year finish warranty;Smittybilt Advantage Lifetime Warranty;California Residents: WARNING The new XRC Gen2 bumpers have been completely redesigned with more aggressive styling and heavy duty features, giving you the ultimate performance for rock crawling. These stubby bumpers provide increased clearance and have angled corners for more aggressive approach angles in extreme conditions - perfect for vehicles running oversized tires. The redesigned solid D-ring and jack point mounts are welded on the inside and out, and feature an integrated recovery point for easy access. This new bumper also allows the use of most OE fog lights. The winch plate has been placed lower for greater airflow to the radiator, while the new overrider is 2 diameter and has integrated mounts for additional lighting. The XRC Gen2 is available in the new Light Texture finish..
**** PRICE: 700
Manufacturer : Smittybilt
SKU:
UPC: 77807
Tags: - .

Start of page

Rampage TrailGuard Front Bumper (Black) - RPP99510
Rampage TrailGuard Front Bumper (Black) - RPP99510
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Textured black powder coat;3/16 cold rolled steel;No-drill installation;Integrated winch plate designed inside bumper allows for better air flow into radiator;Winch-protecting angled bull bar;4 light opening fits factory or aftermarket lights;Shackle mounts with D-rings included;California Residents: WARNING These new shortened, heavy-duty front and rear bumpers allow for bigger tires and an easier approach to tough terrain angles. The bumpers feature a cold-rolled steel construction, no-drill installation and an integrated winch plate..
**** PRICE: 600
Manufacturer : Rampage
SKU: 873563002992
UPC: 99510
Tags: - .

Start of page

Rampage TrailGuard Front Bumper - 99512
Rampage TrailGuard Front Bumper - 99512
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Integrated winch plate designed inside bumper allows for better air flow into radiator;Accommodates up to a 12k lb. winch, including a Warn Zeon winch;Winch-protecting angled bull bar;4 light opening fits factory or aftermarket fog lights;Shackle mounts with D-rings included;5-year limited warranty;California Residents: WARNING When you’ve got bigger tires on your Jeep and want an easier approach to tough terrain angles, Rampage new TrailGuard Front and Rear Bumpers are the answer. These shortened, heavy-duty bumpers are chock-full of features, constructed of cold-rolled steel with a lightly textured black powder-coated finish, and offer no-drill installation.".
**** PRICE: 617
Manufacturer : Rampage
SKU: 00842813100412
UPC: 99512
Tags: - .

Start of page

Rock-Slide Engineering R-SE Rigid Full Front Bumper with Bullbar (Black) - FB-F-100-JK
Rock-Slide Engineering R-SE Rigid Full Front Bumper with Bullbar (Black) - FB-F-100-JK
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Black powder coat;Made from 3/16 alloy steel;2 D-ring shackle points;Recessed winch mount;Integrated light pockets;California Residents: WARNING The Rigid Front Bumper has a unique contoured design that ensures complete front tire coverage between the bumper and stock fender flares, while adding specific strength in the areas that demand the most. Built out of 3/16 inch alloy steel and 1/4 inch mounting plates, we guarantee this will be the toughest bumper you can find. Special features include;2 recovery shackle points, integrated light pockets, a 9 inch drop winch mount to maximize airflow to the radiator, the contoured R-SE Rigid Bull Bar. Optional accessories are a LED winch work light, and a hinged winch lid to completely protect and conceal your winch. If you want aftermarket perks without aftermarket looks- the R-SE Front Bumper is for you! Available in black powder coat..
**** PRICE: 1300
Manufacturer : Rock Slide Engineering
SKU: 00887753114075
UPC: FB-F-100-JK
Tags: - .

Start of page

Rock-Slide Engineering R-SE Rigid Full Front Bumper without Bullbar (Black) - FB-F-101-JK
Rock-Slide Engineering R-SE Rigid Full Front Bumper without Bullbar (Black) - FB-F-101-JK
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Bullbar not included;Black powder coat;Made from 3/16 alloy steel;2 D-ring shackle points;Recessed winch mount;Integrated light pockets;California Residents: WARNING The Rigid Front Bumper has a unique contoured design that ensures complete front tire coverage between the bumper and stock fender flares, while adding specific strength in the areas that demand the most. Built out of 3/16 inch alloy steel and 1/4 inch mounting plates, we guarantee this will be the toughest bumper you can find. Special features include;2 recovery shackle points, integrated light pockets, a 9 inch drop winch mount to maximize airflow to the radiator, the contoured R-SE Rigid Bull Bar, a LED winch work light, and a hinged winch lid to completely protect and conceal your winch. If you want aftermarket perks without aftermarket looks- the R-SE Front Bumper is for you! Available in black powder coat. Bullbar pictures are used for illustrative purposes only. This will be the exact same bumper as the pictures, minus the Bullbar..
**** PRICE: 1025
Manufacturer : Rock Slide Engineering
SKU: 00887753114167
UPC: FB-F-101-JK
Tags: - .

Start of page

Rock-Slide Engineering R-SE Rigid Shorty Front Winch Bumper with Bullbar (Black) - FB-S-100-JK
Rock-Slide Engineering R-SE Rigid Shorty Front Winch Bumper with Bullbar (Black) - FB-S-100-JK
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Black powder coat;Made from 3/16 alloy steel;2 D-ring shackle points;Recessed winch mount;California Residents: WARNING The Rigid Shorty Front Bumper has a unique contoured design that allows for a complete range of motion when you need it most. Built out of 3/16 inch alloy steel and 1/4 inch mounting plates, we guarantee this will be the toughest bumper you can find. Special features include:2 recovery shackle points, a 9 inch drop winch mount to maximize airflow to the radiator, the contoured R-SE Rigid Bull Bar and an LED winch work light. If you want aftermarket perks without aftermarket looks- the R-SE Front Bumper is for you! Available in black powder coat..
**** PRICE: 800
Manufacturer : Rock Slide Engineering
SKU: 00887753114686
UPC: FB-S-100-JK
Tags: - .

Start of page

Rock-Slide Engineering R-SE Rigid Shorty Front Bumper without Bullbar (Black) - FB-S-101-JK
Rock-Slide Engineering R-SE Rigid Shorty Front Bumper without Bullbar (Black) - FB-S-101-JK
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Without Bullbar;Black powder coat;Made from 3/16 alloy steel;2 D-ring shackle points;Recessed winch mount;California Residents: WARNING The Rigid Shorty Front Bumper has a unique contoured design that allows for a complete range of motion when you need it most. Built out of 3/16 inch alloy steel and 1/4 inch mounting plates, we guarantee this will be the toughest bumper you can find. Special features include;2 recovery shackle points, a 9 inch drop winch mount to maximize airflow to the radiator and a hinged winch lid to completely protect and conceal your winch. If you want aftermarket perks without aftermarket looks- the R-SE Front Bumper is for you! Available in black powder coat. Picture is for illustrative purposes only, the bumper will look very similar minus the grill guard..
**** PRICE: 615
Manufacturer : Rock Slide Engineering
SKU: 00887753114709
UPC: FB-S-101-JK
Tags: - .

Start of page

RT Off-Road Grille Inserts - RT26079
RT Off-Road Grille Inserts - RT26079
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Protects The radiator Gloss Black Powder Coat Finish Formed Steel Mesh Construction 3D 1 Piece;California Residents: WARNING Grille Inserts; 1 Piece; Gloss Black Powder Coat; Formed Steel;.
**** PRICE: 274
Manufacturer : RT Off-Road
SKU: 00849603007272
UPC: RT26079
Tags: - .

Start of page

RT Off-Road Bug Screen (Black) - RT26023
RT Off-Road Bug Screen (Black) - RT26023
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Black powdercoated;Will not work with hood locks;California Residents: WARNING Protect your radiator with the Rough Trail black bug screen..
**** PRICE: 44
Manufacturer : RT Off-Road
SKU: 848399001372
UPC: RT26023
Tags: - .

Start of page

Rough Country 2 Jeep Body Lift Kit - RC605
Rough Country 2 Jeep Body Lift Kit - RC605"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with auto transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.Notes:Does NOT fit manual transmission models..
**** PRICE: 110
Manufacturer : Rough Country
SKU:
UPC: RC605
Tags: - .

Start of page

Rough Country 3 Jeep Body Lift Kit - RC606
Rough Country 3 Jeep Body Lift Kit - RC606"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with auto transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.Notes:Does NOT fit manual transmission models..
**** PRICE: 150
Manufacturer : Rough Country
SKU:
UPC: RC606
Tags: - .

Start of page

Rough Country 1 Jeep Body Mount Lift Kit - RC609
Rough Country 1 Jeep Body Mount Lift Kit - RC609"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Easy bolt-on installation;Increased ground clearance;Reduces chasis noise and vibration;No exhaust modifications required;Gain 1 of lift while replacing your old deteriorated body mounts;California Residents: WARNING Rough Country’s innovative new 1-inch Polyurethane Body Lift reduces chassis noise and vibration, featuring specially blended Polyurethane bushings that are resistant to fluids and road grime. Kit includes Grill Support Brackets, radiator Shroud Relocation Brackets, Shift Relocation Brackets for automatic transmissions and durable Grade 8 Hardware..
**** PRICE: 150
Manufacturer : Rough Country
SKU:
UPC: RC609
Tags: - .

Start of page

Rough Country 2 Jeep Body Mount Lift Kit - RC610
Rough Country 2 Jeep Body Mount Lift Kit - RC610"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Easy bolt-on installation;Increased ground clearance;Includes Grade 8 hardware;No exhaust modifications required;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;California Residents: WARNING Body lifts such as this are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These YJ Body Lift Kits include Grill Support Brackets, radiator Shroud Relocation Brackets, and Shift Relocation Brackets for automatic transmissions. This kit fits both manual and automatic equipped Jeep YJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included..
**** PRICE: 130
Manufacturer : Rough Country
SKU:
UPC: RC610
Tags: - .

Start of page

Rough Country 3 Jeep Body Mount Lift Kit - RC611
Rough Country 3 Jeep Body Mount Lift Kit - RC611"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Easy bolt-on installation;Increased ground clearance;Includes Grade 8 hardware;No exhaust modifications required;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;California Residents: WARNING Body lifts such as this are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These YJ Body Lift Kits include Grill Support Brackets, radiator Shroud Relocation Brackets, and Shift Relocation Brackets for automatic transmissions. This kit fits both manual and automatic equipped Jeep YJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included..
**** PRICE: 150
Manufacturer : Rough Country
SKU:
UPC: RC611
Tags: - .

Start of page

Rough Country 2 Jeep Body Lift Kit - RC612
Rough Country 2 Jeep Body Lift Kit - RC612"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with manual transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes Grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit automatic transmission models;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included..
**** PRICE: 130
Manufacturer : Rough Country
SKU:
UPC: RC612
Tags: - .

Start of page

Rough Country 3 Jeep Body Lift Kit - RC613
Rough Country 3 Jeep Body Lift Kit - RC613"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with manual transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes Grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit automatic transmission models;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.Notes:Does NOT fit automatic transmission models..
**** PRICE: 150
Manufacturer : Rough Country
SKU:
UPC: RC613
Tags: - .

Start of page

Rough Country 3 Jeep Body Lift Kit - RC617
Rough Country 3 Jeep Body Lift Kit - RC617"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with manual transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes Grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit automatic transmission models;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.Notes:Does NOT fit automatic transmission models..
**** PRICE: 150
Manufacturer : Rough Country
SKU:
UPC: RC617
Tags: - .

Start of page

Rough Country 2 Jeep Body Lift Kit - RC616
Rough Country 2 Jeep Body Lift Kit - RC616"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .For models with manual transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes Grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit automatic transmission models;California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ’s and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.Notes:Does NOT fit automatic transmission models..
**** PRICE: 130
Manufacturer : Rough Country
SKU:
UPC: RC616
Tags: - .

Start of page

Rough Country 1.25 Jeep Body Lift Kit - 1157
Rough Country 1.25 Jeep Body Lift Kit - 1157"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Easy bolt-on installation;Increased ground clearance;Provides 1.25 of lift opposed to the standard 1;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;California Residents: WARNING The 1.25 TJ Body Lift by Rough Country is the most complete and economical solution to tire clearance problems that does not affect your driveline, the spring rate or the steering geometry of the TJ.This Rough Country Body Lift provides a full 1.25 of additional tire clearance, as opposed to the standard 1 provided by most other manufacturers. The 1.25 body lift can be used to gain needed clearance for high clearance skid plates (tummy tucks). It requires no modifications to the fuel tank, air conditioning, radiator, and brakes.Notes:Does NOT fit 05-06 6-speed manual transmission models..
**** PRICE: 100
Manufacturer : Rough Country
SKU:
UPC: 1157
Tags: - .

Start of page

RIPP Superchargers JK Wrangler Automatic Transmission Cooler - 0714TRANS
RIPP Superchargers JK Wrangler Automatic Transmission Cooler - 0714TRANS
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Black powder coat to avoid oxidation;Copper tubing for best heat transfer;Aluminum Fins for heat dissipation;Plastic end caps for OEM look and protection;High-temperature, OEM spec hose with stainless steel clamps;Nylon mounting rods with pads Bendable, metal mounting brackets;Insta-dapt radiator adapter;All necessary hardware;Made in USA;California Residents: WARNING The transmission in JKs run hot stock, when you add larger tires and weight it works harder and gets hotter. The factory trans cooler just doesn’t cut it, its riddled with flaws. Our unit works, it keeps the basics in mind. dissipate heat...period! Copper is the best material for conducting the heat out of the fluid while aluminum is ideal for transferring and dissipating that heat Protected from possible damage during installation by plastic fin guards and powder coat finish..
**** PRICE: 124
Manufacturer : RIPP Superchargers
SKU:
UPC: 0714TRANS
Tags: - .

Start of page

Omix-ADA Heavy-Duty Radiator Outlet Hose - 56022039
Omix-ADA Heavy-Duty radiator Outlet Hose - 56022039
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .94-96 Cherokee XJ;California Residents: WARNING This heavy-duty radiator outlet hose fits Jeep Cherokee. An Omix-ADA factory direct fit replacement part..
**** PRICE: 167
Manufacturer : Omix-Ada
SKU: 804314105624
UPC: 56022039
Tags: - .

Start of page

Omix-ADA Lower Radiator Hose - 56022040
Omix-ADA Lower radiator Hose - 56022040
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .91-01 Cherokee XJ;91-92 Comanche MJ;4.0L 6 cylinder engine;Right hand drive models;California Residents: WARNING Lower radiator hose fits right hand drive Jeep Cherokee and Comanche with 4.0L engines. Omix-ADA factory direct fit replacement. PLEASE NOTE: Right Hand Drive Only..
**** PRICE: 167
Manufacturer : Omix-Ada
SKU: 804314105631
UPC: 56022040
Tags: - .

Start of page

Omix-ADA Radiator Baffle - S-55235221
Omix-ADA radiator Baffle - S-55235221
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .Driver side;California Residents: WARNING This left baffle from Omix-ADA fits 87-01 Jeep Cherokee XJ and 87-92 Comanche MJ..
**** PRICE: 106
Manufacturer : Omix-Ada
SKU: 804314103095
UPC: S-55235221
Tags: - .

Start of page

Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 11-16-020-DC
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 11-16-020-DC
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .76-86 CJ;Bare steel;3/16 plate steel;No wider than the frame rails;Stinger provides even better forward-roll prevention;Extends 17.6 forward from the front edge of the bumper;21.9 high from the top surface of the bumper;Shackle tabs are 1;California Residents: WARNING Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16 plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 13.4 forward from the front edge of the bumper, and 17 high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1 thick plate steel to provide a secure attachment point for 3/4 recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle..
**** PRICE: 460
Manufacturer : Poison Spyder Customs
SKU: 614901723564
UPC: 11-16-020-DC
Tags: - .

Start of page

Poison Spyder Hood Louver - 13-53-010
Poison Spyder Hood Louver - 13-53-010
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .87-95 Wrangler YJ;Bare aluminum;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 144
Manufacturer : Poison Spyder Customs
SKU: 614901724653
UPC: 13-53-010
Tags: - .

Start of page

Poison Spyder Hood Louver - 13-53-010-PC
Poison Spyder Hood Louver - 13-53-010-PC
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .87-95 Wrangler YJ;Black powder coat;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU: 614901724660
UPC: 13-53-010-PC
Tags: - .

Start of page

Poison Spyder Comp Stinger (Bare)- 14-12-010
Poison Spyder Comp Stinger (Bare)- 14-12-010
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .97-06 Wrangler TJ/LJ;Bare steel;Made from 3/16 steel plate;1-3/4 x.120 wall DOM tubing;36 from base at a 45 degree angle;California Residents: WARNING Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for todays extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable. The Comp Stinger is built on a base plate laser cut from 3/16 plate steel, with a Stinger hoop made of CNC-bent 1-3/4 X .120 wall DOM structural tubing. The Comp Stingers main hoop stands 36 from its base at a 45 degree angle. Poison Spyder Stingers are designed to bolt directly onto your Jeeps frame using OE mounting hardware. Poison Spyder Stingers do not include winch mounting provisions, but they will work with any manufactures winch mount plate, as will OE or most aftermarket tow hooks. Stingers are shipped bare steel..
**** PRICE: 236
Manufacturer : Poison Spyder Customs
SKU: 614901725650
UPC: 14-12-010
Tags: - .

Start of page

Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .97-06 Wrangler TJ/LJ;Bare steel;3/16 plate steel;No wider than the frame rails;Stinger provides even better forward-roll prevention;Extends 17.6 forward from the front edge of the bumper;21.9 high from the top surface of the bumper;California Residents: WARNING Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16 plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6 forward from the front edge of the bumper, and 21.9 high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1 thick plate steel to provide a secure attachment point for 3/4 recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle..
**** PRICE: 459
Manufacturer : Poison Spyder Customs
SKU: 614901725797
UPC: 14-16-020-DC
Tags: - .

Start of page

Poison Spyder Hood Louver (Black) - 19-53-010P1
Poison Spyder Hood Louver (Black) - 19-53-010P1
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;For Sport and Sahara models only;Black powder coat finish;Crafted from quality, thick gauge aluminum sheet;Aluminum makes the hood louver light weight and corrosion resistant;CNC laser-cut and die-stamped;Helps reduce hood wobble at speeds;Keeps engine cool;Easy installation with template;Require some drilling and cutting of your hood;Stainless steel fasteners are included;Full-size template with instructions for cutting the airflow holes in the hood included;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting air flow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU:
UPC: 19-53-010P1
Tags: - .

Start of page

Poison Spyder Trail Stinger (Bare)- 13-11-010
Poison Spyder Trail Stinger (Bare)- 13-11-010
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .87-95 Wrangler YJ;Bare steel;Made from 3/16 steel plate;1-3/4 x.120 wall DOM tubing;27 from base at a 47 degree angle;California Residents: WARNING Poison Spyder Customs Front Stingers are not the same look-alike rectangular Jeep bumper. The stinger is a sturdy and functional bumper built for todays extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. Built on a base plate laser cut from 3/16 plate steel, with a Stinger hoop made of CNC-bent 1-3/4 X .120 wall DOM structural tubing. The Trail Stingers main hoop stands 27 from its base at a 47 degree angle. Stingers do not include winch mounting provisions. Stingers will work with any manufactures winch mount plate. OE tow hooks will work in conjunction with Poison Spyders Trail Stinger; If a stronger recovery point is desired check out Poison Spyders D-Ring Shackle Tabs. Relocation of any bumper-mounted auxiliary lights is required. Poison Spyder offers a Fairlead Light Mount to relocate auxiliary lights to the top of the roller or hawse winch fairlead. Stingers are shipped bare steel..
**** PRICE: 215
Manufacturer : Poison Spyder Customs
SKU: 614901724363
UPC: 13-11-010
Tags: - .

Start of page

Poison Spyder Comp Stinger (Bare)- 13-12-010
Poison Spyder Comp Stinger (Bare)- 13-12-010
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .87-95 Wrangler YJ;Bare steel;Made from 3/16 steel plate and 1-3/4 x.120 wall DOM tubing;36 from base at a 45 degree angle;California Residents: WARNING Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for todays extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable. The Comp Stinger is built on a base plate laser cut from 3/16 plate steel, with a Stinger hoop made of CNC-bent 1-3/4 X .120 wall DOM structural tubing. The Comp Stingers main hoop stands 36 from its base at a 45 degree angle. Poison Spyder Stingers are designed to bolt directly onto your Jeeps frame using OE mounting hardware. Poison Spyder Stingers do not include winch mounting provisions, but they will work with any manufactures winch mount plate, as will OE or most aftermarket tow hooks. Stingers are shipped bare steel..
**** PRICE: 236
Manufacturer : Poison Spyder Customs
SKU: 614901724370
UPC: 13-12-010
Tags: - .

Start of page

Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 13-16-020-DC
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 13-16-020-DC
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .87-95 Wrangler YJ;Bare steel;3/16 plate steel;No wider than the frame rails;Stinger provides even better forward-roll prevention;Extends 17.6 forward from the front edge of the bumper;21.9 high from the top surface of the bumper;California Residents: WARNING Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16 plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 13.4 forward from the front edge of the bumper, and 17 high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1 thick plate steel to provide a secure attachment point for 3/4 recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle..
**** PRICE: 461
Manufacturer : Poison Spyder Customs
SKU: 614901724479
UPC: 13-16-020-DC
Tags: - .

Start of page

Poison Spyder Trail Stinger (Bare)- 14-11-010
Poison Spyder Trail Stinger (Bare)- 14-11-010
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .97-06 Wrangler TJ/LJ;Bare steel;Made from 3/16 steel plate;1-3/4 x.120 wall DOM tubing;27 from base at a 47 degree angle;California Residents: WARNING Poison Spyder Customs Front Stingers are not the same look-alike rectangular Jeep bumper. The stinger is a sturdy and functional bumper built for todays extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. Built on a base plate laser cut from 3/16 plate steel, with a Stinger hoop made of CNC-bent 1-3/4 X .120 wall DOM structural tubing. The Trail Stingers main hoop stands 27 from its base at a 47 degree angle. Stingers do not include winch mounting provisions. Stingers will work with any manufactures winch mount plate. OE tow hooks will work in conjunction with Poison Spyders Trail Stinger; If a stronger recovery point is desired check out Poison Spyders D-Ring Shackle Tabs. Relocation of any bumper-mounted auxiliary lights is required. Poison Spyder offers a Fairlead Light Mount to relocate auxiliary lights to the top of the roller or hawse winch fairlead. Stingers are shipped bare steel..
**** PRICE: 215
Manufacturer : Poison Spyder Customs
SKU: 614901725643
UPC: 14-11-010
Tags: - .

Start of page

Poison Spyder Hood Louver - 14-53-010
Poison Spyder Hood Louver - 14-53-010
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .03-06 Wrangler TJ/LJ;Bare aluminum;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;One washer nozzle port;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 140
Manufacturer : Poison Spyder Customs
SKU: 614901726084
UPC: 14-53-010
Tags: - .

Start of page

Poison Spyder Hood Louver - 14-53-010-PC
Poison Spyder Hood Louver - 14-53-010-PC
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .03-06 Wrangler TJ/LJ;Black powder coat;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;One washer nozzle port;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU: 614901726091
UPC: 14-53-010-PC
Tags: - .

Start of page

Poison Spyder Hood Louver - 14-53-011
Poison Spyder Hood Louver - 14-53-011
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .97-02 Wrangler TJ;Bare aluminum;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;Two washer nozzle ports;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 140
Manufacturer : Poison Spyder Customs
SKU: 614901726107
UPC: 14-53-011
Tags: - .

Start of page

Poison Spyder Hood Louver - 14-53-011-PC
Poison Spyder Hood Louver - 14-53-011-PC
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .97-02 Wrangler TJ;Black powder coat;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;Two washer nozzle ports;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU: 614901726114
UPC: 14-53-011-PC
Tags: - .

Start of page

Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .97-06 Wrangler TJ/LJ;Bare steel;Mid-width high clearance bumper;3/16 plate steel;CNC laser-cut;Extends far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access;California Residents: WARNING The RockBrawler front bumper is a mid-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The faceted design of the RockBrawler front bumper provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The Brawler Bar is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. CNC laser-cut brake-formed 3/16 plate steel gussets further strengthen the Brawler Bar. Any winch with a standard 10 X 4.5 mounting pattern will bolt right on to the RockBrawler front bumper. If mounting a winch, you’ll need a Winch Fairlead Mount, sold separately. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 thick steel billet, specifically designed to accept our heavy duty 3/4 Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the RockBrawler bumper..
**** PRICE: 550
Manufacturer : Poison Spyder Customs
SKU: 614901726169
UPC: 14-59-010-DB
Tags: - .

Start of page

Poison Spyder Customs Bruizer Front Bumper (Black) - 17-57-010DBTP1
Poison Spyder Customs Bruizer Front Bumper (Black) - 17-57-010DBTP1
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles;Recessed winch mount;Brawler Bar made of DOM tubing with tube gussets;SpyderShell Armor Coat semi-gloss black finish;Recessed light mounts accept LED cube lights;California Residents: WARNING The Bruiser? front bumper for JK is a grille-width, high clearance bumper with recessed winch mounting. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design for optimum off-road performance. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This product is finished in black with Poison Spyders proprietary SpyderShell? Armor Coat process. Plate Steel Construction - Bruiser? series bumpers are fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. Recessed Winch Mount - A Winch may be installed into a heavy-duty winch mount cradle that is separate from the structure of the Bruiser? bumper shell. This provides maximum mounting strength for the winch, while also locating it as low as possible within the bumper shell. The recessed winch provides unimpeded airflow through the Jeeps radiator at highway speeds, and keeps the weight of the winch as low as possible to achieve a Low Center Of Gravity. Your winch fairlead mounts directly to the integrated fairlead mount on the front of the bumper, eliminating the need to purchase a separate fairlead mount. The Bruiser bumper is compatible with most Warn, Smittybilt, and other brand winches that use the popular 10 x 4.5 mounting pattern, including Warn ZEON series winches up to model 10S. (Poison Spyder ZEON Winch Spacers are not necessary with this bumper). Brawler Bar - The Brawler Bar is modeled after the bar found on our original RockBrawler? front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched,.
**** PRICE: 800
Manufacturer : Poison Spyder Customs
SKU:
UPC: 17-57-010DBTP1
Tags: - .

Start of page

Poison Spyder Brawler Lite Front Bumper with Brawler Bar (Bare)- 17-59-010-B
Poison Spyder Brawler Lite Front Bumper with Brawler Bar (Bare)- 17-59-010-B
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Bare steel;3/16 plate steel;Mid-width high clearance bumper;Ends extend far enough to protect the lower corner of the JK grille;Features recessed buckets to mount the factory fog lamps;Integrated winch mount;Brawler Bar is 1-3/4 diameter .120 wall DOM tubing;D-ring mounts are not included on this bumper;California Residents: WARNING The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects.
**** PRICE: 615
Manufacturer : Poison Spyder Customs
SKU: 614901727166
UPC: 17-59-010-B
Tags: - .

Start of page

Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare)- 17-59-010-DB
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare)- 17-59-010-DB
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;3/16 plate bare steel;Mid-width high clearance bumper;Ends extend far enough to protect the lower corner of the JK grille;Features recessed buckets to mount the factory fog lamps;Integrated winch mount;Brawler bar is 1-3/4 diameter .120 wall DOM tubing;Shackle tabs made of 1 thick plate steel;California Residents: WARNING The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects.
**** PRICE: 650
Manufacturer : Poison Spyder Customs
SKU: 614901727203
UPC: 17-59-010-DB
Tags: - .

Start of page

Poison Spyder Customs Crawler MID Front Bumper (Black) - 17-52-010DBP1
Poison Spyder Customs Crawler MID Front Bumper (Black) - 17-52-010DBP1
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires;Large radius bends for strength and great looks;Brawler Bar made of DOM tubing with tube gussets;SpyderShell Armor Coat semi-gloss black finish;Recessed light mounts accept LED cube lights;California Residents: WARNING The JK Crawler? Front Bumper is a grille-width and combines tough off-road performance with cutting edge styling in a full featured premium bumper. Fabricated entirely of high strength 3/16 plate steel, special proprietary tooling gives these bumpers their signature large-radius-bend features. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This product is finished in black with Poison Spyders proprietary SpyderShell? Armor Coat process. Plate Steel Construction - Crawler? series bumpers are fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. Proprietary tooling is used to form the Crawler series signature large-radius bends, giving the bumper its unique styling that’s a great match for the subtle curves of the Jeeps body lines. The ends of the bumper extend to about the middle of the Jeeps tire width to provide extra protection for the grille and corner of the Jeep, while maintaining clearance for up to 37 tires at full suspension articulation. Winch Compatibility - The Crawler?s top-mounted, integrated winch mount is part of the fully boxed, internally gusseted bumper shell. This bumper is designed to accept most Warn and other brand winches that use the popular 10 x 4.5 mounting pattern, with a few small exceptions. Mounting Warn ZEON series winches require our Zeon Winch Spacer Plates. Brawler Bar - The Brawler Bar is modeled after the bar found on our original RockBrawler? front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to multiple planes on the surface of the bumper, providing incredible strength. The Brawler Bar is supported by a pair of beefy gussets,.
**** PRICE: 820
Manufacturer : Poison Spyder Customs
SKU:
UPC: 17-52-010DBP1
Tags: - .

Start of page

Poison Spyder Hood Louver - 17-53-010
Poison Spyder Hood Louver - 17-53-010
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .07-12 Wrangler JK, 2 & 4 Door;Bare aluminum;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 144
Manufacturer : Poison Spyder Customs
SKU: 614901727098
UPC: 17-53-010
Tags: - .

Start of page

Poison Spyder Hood Louver - 17-53-010-PC
Poison Spyder Hood Louver - 17-53-010-PC
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .07-12 Wrangler JK, 2 & 4 Door;Black powder coat;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU: 614901727104
UPC: 17-53-010-PC
Tags: - .

Start of page

Poison Spyder Hood Louver - 17-53-011
Poison Spyder Hood Louver - 17-53-011
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .13-Current Wrangler JK, 2 & 4 Door;Bare aluminum;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 144
Manufacturer : Poison Spyder Customs
SKU: 614901727111
UPC: 17-53-011
Tags: - .

Start of page

Poison Spyder Hood Louver - 17-53-011-PC
Poison Spyder Hood Louver - 17-53-011-PC
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .13-Current Wrangler JK, 2 & 4 Door;Black powder coat;CNC laser-cut and die-stamped;Keeps engine cool;Easy installation with template;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air. Rock-crawlers and slow-moving vehicles are especially susceptible, as slower speeds naturally result in reduced airflow. Poison Spyder Hood Louvers are crafted from quality, thick gauge aluminum sheet. They are CNC laser-cut and precision die-stamped. Aluminum makes the hood louver both light weight and corrosion resistant. But its thick enough to add some rigidity to the Jeeps notoriously thin sheet metal hood, helping to reduce hood wobble at speeds. Hood Louvers are fairly easy to install but do require some drilling and cutting of your hood. Stainless steel fasteners are supplied, as well as a full-size template with instructions for cutting the airflow holes in the hood..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU: 614901727128
UPC: 17-53-011-PC
Tags: - .

Start of page

Poison Spyder Customs Bruizer MID Front Bumper (Black) - 17-55-010DBTP1
Poison Spyder Customs Bruizer MID Front Bumper (Black) - 17-55-010DBTP1
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-Current Wrangler JK, 2 & 4 Door;Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires;Recessed winch mount;Brawler Bar made of DOM tubing with tube gussets;SpyderShell Armor Coat semi-gloss black finish;Recessed light mounts accept LED cube lights;California Residents: WARNING The Bruizer MID front bumper for JK is a mid-width heavy duty bumper with extra protection for the grille and tires. A recessed winch mount provides allows free airflow to the radiator and a lower center of gravity. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design for optimum off-road performance. The ends of the bumper extend far enough to protect the lower corners of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This product is finished in black with Poison Spyders proprietary SpyderShell Armor Coat process. Plate Steel Construction: Bruizer series bumpers are fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend to about the middle of the Jeeps tire width to provide extra protection for the grille and corner of the Jeep, while maintaining clearance for up to 37 tires at full suspension articulation. Recessed Winch Mount: A winch may be installed into a heavy-duty winch mount cradle that is separate from the structure of the Bruizer bumper shell. This provides maximum mounting strength for the winch, while also locating it as low as possible within the bumper shell. The recessed winch provides unimpeded airflow through the Jeeps radiator at highway speeds, and keeps the weight of the winch as low as possible to achieve a Low Center Of Gravity. Your winch fairlead mounts directly to the integrated fairlead mount on the front of the bumper, eliminating the need to purchase a separate fairlead mount. The Bruizer bumper is compatible with most Warn, Smittybilt, and other brand winches that use the popular 10 x 4.5 mounting pattern, including Warn ZEON series winches up to model 10S. (Poison Spyder ZEON Winch Spacers are not necessary with this bumper). Brawler Bar - The Brawler Bar is modeled after the bar found.
**** PRICE: 820
Manufacturer : Poison Spyder Customs
SKU:
UPC: 17-55-010DBTP1
Tags: - .

Start of page

Poison Spyder Customs JL Bruizer Front Bumper - 19-57-010DBTP1
Poison Spyder Customs JL Bruizer Front Bumper - 19-57-010DBTP1
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles;Recessed winch mount;Brawler Bar made of DOM tubing with tube gussets;SpyderShell Armor Coat semi-gloss black finish;Recessed light mounts accept LED cube lights;California Residents: WARNING The JL Bruizer front bumper for JL is a grille-width, high clearance bumper with recessed winch mounting. This bumper is fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design for optimum off-road performance. The ends of the bumper extend far enough to protect the lower corner of the JL grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This product is finished in black with Poison Spyder’s proprietary SpyderShell Armor Coat process. Bruizer series bumpers are fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JL grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.A Winch may be installed into a heavy-duty winch mount cradle that is separate from the structure of the Bruizer bumper shell. This provides maximum mounting strength for the winch, while also locating it as low as possible within the bumper shell. The recessed winch provides unimpeded airflow through the Jeep’s radiator at highway speeds, and keeps the weight of the winch as low as possible to achieve a Low Center Of Gravity. Your winch fairlead mounts directly to the integrated fairlead mount on the front of the bumper, eliminating the need to purchase a separate fairlead mount. The Bruizer bumper is compatible with most Warn, Smittybilt, and other brand winches that use the popular 10 x 4.5 mounting pattern,, including Warn ZEON series winches up to model 10S. (Poison Spyder ZEON Winch Spacers are not necessary with this bumper).The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM.
**** PRICE: 800
Manufacturer : Poison Spyder Customs
SKU:
UPC: 19-57-010DBTP1
Tags: - .

Start of page

Poison Spyder Customs JL Crawler Front Bumper - 19-58-010DBP1
Poison Spyder Customs JL Crawler Front Bumper - 19-58-010DBP1
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles;Large radius bends for strength and great looks;Brawler Bar made of DOM tubing with tube gussets;SpyderShell Armor Coat semi-gloss black finish;Recessed light buckets accept OE fog lamps or Rigid Industries Dually’s by use of adapter plate (sold separately);California Residents: WARNING The JL Crawler Front Bumper is a grille-width and combines tough off-road performance with cutting edge styling in a full featured premium bumper. Fabricated entirely of high strength 3/16 plate steel, special proprietary tooling gives these bumpers their signature large-radius-bend features. The ends of the bumper extend far enough to protect the lower corner of the JL grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This product is finished in black with Poison Spyder’s proprietary SpyderShell Armor Coat process.Plate Steel Crawler series bumpers are fabricated from 3/16 plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.The Crawler’s top-mounted, integrated winch mount is part of the fully boxed, internally gusseted bumper shell. This bumper is designed to accept most Warn and other brand winches that use the popular 10 X 4.5 mounting pattern, with a few small exceptions. Mounting Warn ZEON series winches require our Zeon Winch Spacer Plates.The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3/4 diameter .120 wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to multiple planes on the surface of the bumper, providing incredible strength. The Brawler Bar is supported by a pair of beefy gussets, CNC laser cut from 1/4 thick plate steel.The Crawler Front Bumper is installed without cutting or altering the Jeep’s frame rails. The faceted design provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar requires.
**** PRICE: 770
Manufacturer : Poison Spyder Customs
SKU:
UPC: 19-58-010DBP1
Tags: - .

Start of page

Poison Spyder Hood Louver (Black) - 19-53-012P1
Poison Spyder Hood Louver (Black) - 19-53-012P1
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;For Rubicon models only;Black powder coat finish;Crafted from quality, thick gauge aluminum sheet;Aluminum makes the hood louver light weight and corrosion resistant;CNC laser-cut and die-stamped;Helps reduce hood wobble at speeds;Keeps engine cool;Easy installation with template;Require some drilling and cutting of your hood;Stainless steel fasteners are included;Full-size template with instructions for cutting the airflow holes in the hood included;California Residents: WARNING The Poison Spyder Hood Louver helps keep your engine running cool by promoting airflow through the engine compartment. Many factors can contribute to high under-hood temperatures, which can translate to higher engine coolant temperatures and overheating. Headers, slow speeds, flex fans, and the cramped spaces of the engine compartment can all contribute to increased heat and reduced airflow. This Hood Louver kit frees up airflow through the engine compartment, allowing hot air to escape and cooler air to be drawn in through the radiator, improving cooling of both the engine coolant and under-hood air..
**** PRICE: 170
Manufacturer : Poison Spyder Customs
SKU:
UPC: 19-53-012P1
Tags: - .

Start of page

PSC Steering 16 Single Pass Heat Sink Super Flow Cooler (-6 AN Fittings) - CK100-6
PSC Steering 16 Single Pass Heat Sink Super Flow Cooler (-6 AN Fittings) - CK100-6"
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .Heat sink design produces high heat transfer with minimal air flow;External and internal heat dissipating fins;Compact 3 diameter core can be mounted in a variety of locations;The cooler should always be mounted below the pump and outside the engine compartment;California Residents: WARNING The internal and external cooling fins in these heat sink power steering coolers provide maximum cooling efficiency without relying on direct airflow. Their compact diameter means that they can be mounted in a variety of locations, such as in front of the radiator, directly under the radiator, under the floorboards, etc. Their rugged aluminum extrusion features welded ends for long service life, in even the toughest environments..
**** PRICE: 55
Manufacturer : PSC Steering
SKU:
UPC: CK100-6
Tags: - .

Start of page

Putco Front Bumper Grille Inserts - 85197
Putco Front Bumper Grille Inserts - 85197
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .13-Current Wrangler JK, 2 & 4 Door;2-piece inserts;Black powder coat;Includes easy to follow instructions for easy installation;Putco’s NeveRust Lifetime Warranty;California Residents: WARNING Putco’s application specific Bumper Grille Inserts install easily into the bumper or the radiator factory grille opening of your vehicle depending on specific part..
**** PRICE: 96
Manufacturer : Putco
SKU: 010536851977
UPC: 85197
Tags: - .

Start of page

Painless Wiring Electric Fan Relay with Thermostat Protection - 30102
Painless Wiring Electric Fan Relay with Thermostat Protection - 30102
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .200 degrees on/185 degrees off;California Residents: WARNING Do not want to probe the radiator? This Electric Fan Relay comes with a threaded thermostat that screws into the engine block or manifold for a professional installation. Thermostat thread size: 3/8 inch 18 NPTF fitting..
**** PRICE: 50
Manufacturer : Painless Wiring
SKU: 00749823301023
UPC: 30102
Tags: - .

Start of page

Painless Wiring Electric Fan Relay with Thermostat Protection - 30103
Painless Wiring Electric Fan Relay with Thermostat Protection - 30103
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .185 degrees on/170 degrees off;California Residents: WARNING Do not want to probe the radiator? This Electric Fan Relay comes with a threaded thermostat that screws into the engine block or manifold for a professional installation. Thermostat thread size: 3/8 inch 18 NPTF fitting..
**** PRICE: 47
Manufacturer : Painless Wiring
SKU: 00749823301030
UPC: 30103
Tags: - .

Start of page

Omix-ADA Radiator Fan Relay - 17237.19
Omix-ADA radiator Fan Relay - 17237.19
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .99-04 Grand Cherokee WJ;OE style replacement;California Residents: WARNING If your radiator fan relay quits working, it prevents your electric fan from switching on and off. This could cause your engine to overheat. Simply replacing it with our high quality radiator fan relay will get you back on the road..
**** PRICE: 49
Manufacturer : Omix-Ada
SKU: 00804314259396
UPC: 17237.19
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.26
Omix-ADA Replacement 1 Core radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.26
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .99-04 Grand Cherokee WJ;4.0L 6 cylinder engine;Automatic transmission;Core Size: 23-1/2 x 21-7/8;1 Row;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 242
Manufacturer : Omix-Ada
SKU: 00804314052874
UPC: 17101.26
Tags: - .

Start of page

Omix-ADA Replacement 2 Core Radiator for 5.2L & 5.9L V8 Engines with Automatic Transmission - 17101.27
Omix-ADA Replacement 2 Core radiator for 5.2L & 5.9L V8 Engines with Automatic Transmission - 17101.27
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .93-97 Grand Cherokee ZJ;5.2L and 5.9L V8 Engines;Automatic transmission;Core Size: 22-1/8 x 19-3/8;2 Rows;Inlet 1-1/2;Outlet 1-3/4;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 407
Manufacturer : Omix-Ada
SKU: 00804314051365
UPC: 17101.27
Tags: - .

Start of page

Omix-ADA Replacement 2 Core Radiator for 5.2L & 5.9L V8 Engine with Automatic Transmission - 17101.28
Omix-ADA Replacement 2 Core radiator for 5.2L & 5.9L V8 Engine with Automatic Transmission - 17101.28
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .95-97 Grand Cherokee ZJ;5.2L and 5.9L V8 Engines;Automatic transmission;Core Size: 22-1/8 x 19-3/8;2 Row;Inlet 1-1/2;Outlet 1-3/4;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 356
Manufacturer : Omix-Ada
SKU: 00804314031237
UPC: 17101.28
Tags: - .

Start of page

Omix-ADA Replacement 2 Core Radiator for 5.2L & 5.9L V8 Engine with Automatic Transmission - 17101.29
Omix-ADA Replacement 2 Core radiator for 5.2L & 5.9L V8 Engine with Automatic Transmission - 17101.29
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .1998 Grand Cherokee ZJ;5.2L and 5.9L V8 Engine;Automatic transmission;Core Size: 22-1/4 x 19-3/4;2 Row;Direct bolt in;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 508
Manufacturer : Omix-Ada
SKU: 00804314052928
UPC: 17101.29
Tags: - .

Start of page

Omix-ADA Replacement 1 Row Radiator for 4.7L V8 Engine with Automatic Transmission - 17101.30
Omix-ADA Replacement 1 Row radiator for 4.7L V8 Engine with Automatic Transmission - 17101.30
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .99-00 Grand Cherokee;4.7L V8 engine;Automatic transmission;Core Size: 23-1/2 x 21-7/8;1 row;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 291
Manufacturer : Omix-Ada
SKU: 00804314052867
UPC: 17101.30
Tags: - .

Start of page

Omix-ADA Replacement 1 Row Radiator for 4.7L V8 Engine with Automatic Transmission - 17101.31
Omix-ADA Replacement 1 Row radiator for 4.7L V8 Engine with Automatic Transmission - 17101.31
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .01-04 Grand Cherokee WJ;4.7 V8 engines;Automatic transmission;Core size: 23-1/2 x 21-7/8;1 row;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 321
Manufacturer : Omix-Ada
SKU: 00804314138127
UPC: 17101.31
Tags: - .

Start of page

Omix-ADA Replacement 2 Core Radiator for 5.9L & 6.6L V8 Engines with Automatic Transmission - 17101.32
Omix-ADA Replacement 2 Core radiator for 5.9L & 6.6L V8 Engines with Automatic Transmission - 17101.32
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .74-79 SJ Full Size Grand Wagoneer;5.9L and 6.6L V8 engines;Automatic transmission;2 row;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 712
Manufacturer : Omix-Ada
SKU: 00804314035488
UPC: 17101.32
Tags: - .

Start of page

Omix-ADA Replacement 2 Row Radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.34
Omix-ADA Replacement 2 Row radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.34
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .93-94 Cherokee XJ;Right hand drive;4.0L 6 cylinder engines;Automatic transmission;2 core;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 464
Manufacturer : Omix-Ada
SKU: 00804314052065
UPC: 17101.34
Tags: - .

Start of page

Omix-ADA Replacement 2 Row Radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.35
Omix-ADA Replacement 2 Row radiator for 4.0L 6 Cylinder Engine with Automatic Transmission - 17101.35
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .2001 Cherokee XJ;4.0L 6 cylinder engines;Automatic transmission;2 core;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 262
Manufacturer : Omix-Ada
SKU: 00804314138004
UPC: 17101.35
Tags: - .

Start of page

Omix-ADA Replacement 1 Row Radiator for 3.7L V6 Engine with Automatic Transmission - 17101.36
Omix-ADA Replacement 1 Row radiator for 3.7L V6 Engine with Automatic Transmission - 17101.36
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .02-07 Liberty;3.7L V6 engine;Automatic transmission;1 core;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 350
Manufacturer : Omix-Ada
SKU: 00804314002749
UPC: 17101.36
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for 2.4L 4 Cylinder Engine with Air Conditioning - 17101.37
Omix-ADA Replacement 1 Core radiator for 2.4L 4 Cylinder Engine with Air Conditioning - 17101.37
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .02-07 Liberty;2.4L 4 cylinder engine;With A/C;1 row radiator;Direct fit;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 307
Manufacturer : Omix-Ada
SKU: 00804314138172
UPC: 17101.37
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for V6 Engine with Automatic Transmission - 17101.38
Omix-ADA Replacement 1 Core radiator for V6 Engine with Automatic Transmission - 17101.38
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-11 Wrangler JK, 2 & 4 Door;3.8L 6 cylinder engine;One row radiator;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 330
Manufacturer : Omix-Ada
SKU: 00804314225056
UPC: 17101.38
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for V6 and V8 Engine with Automatic Transmission - 17101.39
Omix-ADA Replacement 1 Core radiator for V6 and V8 Engine with Automatic Transmission - 17101.39
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .05-08 Grand Cherokee WK;3.7L, 4.7L and 6.1L engines;Fits automatic or manual transmissions;One row radiator;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 445
Manufacturer : Omix-Ada
SKU: 00804314229191
UPC: 17101.39
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for 5.7L V8 Engine with Automatic Transmission - 17101.40
Omix-ADA Replacement 1 Core radiator for 5.7L V8 Engine with Automatic Transmission - 17101.40
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .06-12 Grand Cherokee;5.7L V8 engine;One row radiator;Automatic transmission;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 251
Manufacturer : Omix-Ada
SKU: 00804314229207
UPC: 17101.40
Tags: - .

Start of page

Omix-ADA Replacement 1 Core Radiator for 2.0L,2.4L 4 cylinder engine with Air Conditioning - 17101.41
Omix-ADA Replacement 1 Core radiator for 2.0L,2.4L 4 cylinder engine with Air Conditioning - 17101.41
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .07-10 Compass and Patriots;2.0L or 2.4L 4 cylinder engines;1 core;With air conditioning;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 254
Manufacturer : Omix-Ada
SKU: 00804314241322
UPC: 17101.41
Tags: - .

Start of page

Omix-ADA Replacement Radiator - 17101.42
Omix-ADA Replacement radiator - 17101.42
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .08-12 Liberty;With 3.7L V6 engine and automatic transmission;5 year limited warranty;California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty..
**** PRICE: 340
Manufacturer : Omix-Ada
SKU: 00804314258054
UPC: 17101.42
Tags: - .

Start of page

Omix-ADA Replacement Heavy-Duty Radiator - 17101.43
Omix-ADA Replacement Heavy-Duty radiator - 17101.43
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .11-Current Grand Cherokee WK2;3.7L V6 engine or 5.7L Hemi V8 engine and automatic transmission;Minimum 5 Year Limited Warranty;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 294
Manufacturer : Omix-Ada
SKU: 00804314258061
UPC: 17101.43
Tags: - .

Start of page

Omix-ADA Replacement Radiator - 17101.44
Omix-ADA Replacement radiator - 17101.44
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .11-Current Grand Cherokee WK2;3.7L V6 or 5.7L Hemi V8 engine;1-core;With automatic transmission;Minimum 5 year limited warranty;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 251
Manufacturer : Omix-Ada
SKU: 00804314258078
UPC: 17101.44
Tags: - .

Start of page

Omix-ADA Replacement Radiator - 17101.45
Omix-ADA Replacement radiator - 17101.45
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .97-06 Wrangler TJ/LJ;With 2.4L or 2.5L 4 cylinder engine or 4.0L 6 cylinder engine;Minimum 5 Year Limited Warranty;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 280
Manufacturer : Omix-Ada
SKU: 00804314258085
UPC: 17101.45
Tags: - .

Start of page

Omix-Ada Replacement Radiator - 17101.47
Omix-Ada Replacement radiator - 17101.47
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .15-Current Jeep Renegade;1.4 liter turbo L4 engine;Factory replacement;California Residents: WARNING Omix-ADA offers a wide variety of OE quality replacement parts for your Jeep vehicle. This radiator fits 15-Current Renegade models equipped with the 1.4 liter turbo L4 engine. Replaces OE# 68260449AA..
**** PRICE: 183
Manufacturer : Omix-Ada
SKU: 804314293833
UPC: 17101.47
Tags: - .

Start of page

Omix-Ada Replacement Radiator - 17101.48
Omix-Ada Replacement radiator - 17101.48
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .15-Current Jeep Renegade; 2.4 liter L4 gas engine;Factory replacement;California Residents: WARNING Omix-ADA offers a wide variety of OE quality replacement parts for your Jeep vehicle. This radiator fits 15-Current Renegade models equipped with the 2.4 liter L4 engine gasoline engine. Replaces OE# 68247208AA..
**** PRICE: 220
Manufacturer : Omix-Ada
SKU: 804314293840
UPC: 17101.48
Tags: - .

Start of page

Omix-Ada Radiator Mount Nut - 17101.50
Omix-Ada radiator Mount Nut - 17101.50
Vehicles & Parts > Vehicle Parts & Accessories > M
ATG_SKU_4WD_data_feed
Description : .84-86 CJ;84-96 Cherokee XJ;86-92 Comanche MJ;84-85 SJ Grand Wagoneer;Sold individually;California Residents: WARNING Omix-ADA proudly offers high-quality replacement parts for your Jeep that meet or exceed OE standards for a great fit and reliable performance. This replacement radiator mounting nut fits 84-96 Cherokee XJ, 86-92 Comanche MJ, 84-85 Grand Wagoneer SJ and 84-86 CJ models (Sold individually). This is a factory surplus part so fit is as original. Replaces OE J4004587..
**** PRICE: 3
Manufacturer : Omix-Ada
SKU:
UPC: 17101.50
Tags: - .

Start of page

Omix-ADA Radiator Fan Shroud - 17102.02
Omix-ADA radiator Fan Shroud - 17102.02
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .74-81 CJ with 3.8L or 4.2L engine;81-86 CJ with an offset radiator cap;WIth heavy duty cooling;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 113
Manufacturer : Omix-Ada
SKU: 00804314036485
UPC: 17102.02
Tags: - .

Start of page

Omix-ADA Radiator Fan Shroud - 17102.03
Omix-ADA radiator Fan Shroud - 17102.03
Vehicles & Parts > Vehicle Parts & Accessories
ATG_SKU_4WD_data_feed
Description : .74-86 CJ;AMC 8 cylinder engine;California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty..
**** PRICE: 143
Manufacturer : Omix-Ada
SKU: 00804314034740
UPC: 17102.03
Tags: - .

Start of page


#24 << Previous Page - Page #1 - Next Page >> #2


PAGES : >> 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | -