Shop Online

www.sapiensman.com



  HOME : Sapiensman Shop Online -

  Buy (Products from over 160 countries). Sell (Sell a single item or create your own store) . Bid ( Penny auctions). Play ( Online games).


 

 

<< Previous Catalog - Home - Next Catalog >>

 


#30 << Previous Page - Page #1 - Next Page >> #2


Fundamentals of HVAC Systems - ControlsFundamentals of HVAC Systems - Energy ConservationFundamentals of HVAC Systems - Special ApplicationsASHRAE Standard 62.1 - Recirculating and Treating Indoor AirASHRAE Standard 62.1 - Natural Ventilation and ExhaustIndoor Air Quality Procedure (IAQ) – the scientific approach to ventilationASHRAE Standard 62.1 - Purpose: Why We Ventilate BuildingsCommissioningVarying Operating Conditions - Do we need all this air all the time?ASHRAE Standard 62.1 - Moisture and Mold ControlFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Indoor Environmental QualityFundamentals of HVAC Systems - Central PlantsVentilation Rate Procedure (VRP) – The current engineering approach to ventilationVentilation Rate Procedure for Multiple-Zones – Ventilation for multi-purpose and large buildingsASHRAE Standard 62.1 - Scope, Definitions, App G & Example BuildingsASHRAE Standard 62.1 - VRP Multiple Zones General Case – Complex Ventilation SystemsASHRAE Standard 62.1 - Construction, Startup, and MaintenanceDocumentation – What we did and whyVRP Multiple Zones VAV - An approach to saving fan energyFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - The Basics of Sustainable DesignFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - LEED GuidanceFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Integrated DesignFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Energy ConservationHVAC System Selection IssuesOccupant Comfort and HealthThe Design ProcessLighting: Small Office BuildingsIntroduction to All-Air SystemsService Water Heating: Small Office BuildingsSingle-Zone and Variable-Air-Volume All-Air SystemsSimple Rooftop All-Air SystemsAll-Water SystemsFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Water ConservationFundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Building ControlAir-Conditioning System Components—Source EquipmentAir-Conditioning System Components—Heat Transfer EquipmentAll-Air Reheat SystemsDual-Duct and Multizone All-Air SystemsDesign Strategies and Recommendations: Small Retail BuildingsQuality Assurance: Small Office BuildingsBuilding Envelope: Small Office BuildingsAir-Conditioning System Components—Pumps, Valves, Piping, and DuctworkHVAC Equipment and Systems: Small Office BuildingsBonus Savings: Small Office BuildingsHVAC&R Controls2102 - Types of Protective Relays2103 - Monitoring System Conditions2104 - Fault Characteristics2108 - Motor Protection2114 - Fault Investigation and AnalysisSpecial HVAC Systems2105 - Generator Protection2106 - Transformer Protection2109 - Line Protection2110 - Pilot Protection2115 - Introduction to Static Relaying2117 - Power Supply for Protection and ControlAir-and-Water Systems2101 - Elements of System Protection2107 - Bus Protection2111 - Protection for System Stability2112 - Testing and Commissioning of Protective Schemes2113 - Power Line Carriers2118 - Energy Center Operations2121 - Supervisory Control System (SCADA)2116 - Coordination of Protection Devices2119 - Telecommunications Protection I: HVSP Devices2120 - Telecommunications Protection II: Installation and ConfigurationFundamentals of HVAC Control Systems -  Introduction to HVAC Control SystemsFundamentals of HVAC Control Systems - Control Valves and DampersFundamentals of HVAC Control Systems - Sensors and Auxiliary DevicesFundamentals of HVAC Control Systems - Self- and System-Powered ControlsFundamentals of HVAC Systems - Introduction to HVAC DesignFundamentals of HVAC Systems - Introduction to HVAC SystemsFundamentals of HVAC Systems - Introduction to ZonesFundamentals of HVAC Systems - Single Zone Air Handlers and Unitary EquipmentASHRAE Standard 62.1 - Outdoor Air QualityFundamentals of HVAC Control Systems - Basics of ElectricityFundamentals of HVAC Control Systems - Pneumatic ControlsFundamentals of HVAC Control Systems - Analog Electronic ControlFundamentals of HVAC Systems - Ventilation and Indoor Air QualityFundamentals of HVAC Control Systems - Control Diagrams and SequencesFundamentals of HVAC Control Systems - Electric ControlsFundamentals of HVAC Systems - Thermal ComfortFundamentals of HVAC Control Systems - Introduction to DDC Hardware and SoftwareFundamentals of HVAC Systems - Multiple Zone Air SystemsFundamentals of HVAC Systems - Hydronic Systems (I-P)ASHRAE Standard 62.1 - Outdoor Air Intakes and ExhaustFundamentals of HVAC Systems - Central PlantsFundamentals of HVAC Control Systems - DDC Networks and ProtocolsFundamentals of HVAC Systems - Hydronic System ArchitectureFundamentals of HVAC Systems - ControlsFundamentals of HVAC Systems - Energy ConservationFundamentals of HVAC Systems - Special ApplicationsASHRAE Standard 62.1 - Recirculating and Treating Indoor AirVRP Multiple Zones VAV - An approach to saving fan energyASHRAE Standard 62.1 - Natural Ventilation and ExhaustIndoor Air Quality Procedure (IAQ) – the scientific approach to ventilationASHRAE Standard 62.1 - Purpose: Why We Ventilate BuildingsCommissioning


#30 << Previous Page - Page #1 - Next Page >> #2
PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 -
Fundamentals of HVAC Systems - Controls


Fundamentals of HVAC Systems - Controls
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Controls


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Energy Conservation


Fundamentals of HVAC Systems - Energy Conservation
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Energy Conservation Measures


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Special Applications


Fundamentals of HVAC Systems - Special Applications
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Special Applications


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Recirculating and Treating Indoor Air


ASHRAE Standard 62.1 - Recirculating and Treating Indoor Air
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Recirculating and Treating Indoor Air - Good air separation makes good neighbors


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Natural Ventilation and Exhaust


ASHRAE Standard 62.1 - Natural Ventilation and Exhaust
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Natural Ventilation and Exhaust - The historical approach to ventilation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Indoor Air Quality Procedure (IAQ) – the scientific approach to ventilation


Indoor Air Quality Procedure (IAQ) – the scientific approach to ventilation
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Indoor Air Quality Procedure (IAQ) - the scientific approach to ventilation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Purpose: Why We Ventilate Buildings


ASHRAE Standard 62.1 - Purpose: Why We Ventilate Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Purpose - Why We Ventilate Buildings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Commissioning


Commissioning
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Commissioning


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Varying Operating Conditions - Do we need all this air all the time?


Varying Operating Conditions - Do we need all this air all the time?
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Varying Operating Conditions


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Moisture and Mold Control


ASHRAE Standard 62.1 - Moisture and Mold Control
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Moisture and Mold Control - What's growing in there?


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Indoor Environmental Quality


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Indoor Environmental Quality
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Indoor Environmental Quality and Energy Delivery


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Central Plants


Fundamentals of HVAC Systems - Central Plants
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Central Plants


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Ventilation Rate Procedure (VRP) – The current engineering approach to ventilation


Ventilation Rate Procedure (VRP) – The current engineering approach to ventilation
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Ventilation Rate Procedure


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Ventilation Rate Procedure for Multiple-Zones – Ventilation for multi-purpose and large buildings


Ventilation Rate Procedure for Multiple-Zones – Ventilation for multi-purpose and large buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Ventilation Rate Procedure for Multiple-Zones


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Scope, Definitions, App G & Example Buildings


ASHRAE Standard 62.1 - Scope, Definitions, App G & Example Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Scope, Definitions, Appendix G, and Example Buildings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - VRP Multiple Zones General Case – Complex Ventilation Systems


ASHRAE Standard 62.1 - VRP Multiple Zones General Case – Complex Ventilation Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

VRP Multiple Zones General Case - Complex Ventilation Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Construction, Startup, and Maintenance


ASHRAE Standard 62.1 - Construction, Startup, and Maintenance
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Construction, Startup, and Maintenance - Now that we have a plan, what do we do next?


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Documentation – What we did and why


Documentation – What we did and why
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

In this course following topics have been covered:

  1. The components of an outdoor air quality reportthat complies with standard 62.1-2007
  2. The minimum requirement for design documentation that complies with standard 62.1-2007
  3. The components when the IAQ procedure is used to comply with standard 62.1-2007
  4. The minimum requirements for an O&M manual that complies with standard 62.1-2007

**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
VRP Multiple Zones VAV - An approach to saving fan energy


VRP Multiple Zones VAV - An approach to saving fan energy
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

VRP Multiple Zones VAV - An approach to saving fan energy


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - The Basics of Sustainable Design


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - The Basics of Sustainable Design
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The Basics Of Sustainable Design


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - LEED Guidance


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - LEED Guidance
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Leed Guidance


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Integrated Design


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Integrated Design
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Leed Guidance


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Energy Conservation


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Energy Conservation
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Energy Conservation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
HVAC System Selection Issues


HVAC System Selection Issues
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

HVAC System Selection Issues


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Occupant Comfort and Health


Occupant Comfort and Health
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Occupant Comfort and Health


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
The Design Process


The Design Process
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The Design Process


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Lighting: Small Office Buildings


Lighting: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Lighting


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Introduction to All-Air Systems


Introduction to All-Air Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Introduction to All-Air Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Service Water Heating: Small Office Buildings


Service Water Heating: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Service Water Heating


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Single-Zone and Variable-Air-Volume All-Air Systems


Single-Zone and Variable-Air-Volume All-Air Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Single-Zone and Variable-Air-Volume All-Air Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Simple Rooftop All-Air Systems


Simple Rooftop All-Air Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Simple Rooftop All-Air Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
All-Water Systems


All-Water Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

All-Water Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Water Conservation


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Water Conservation
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Water Conservation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Building Control


Fundamentals of Sustainable Buildings and High Performance Systems Design (GREENGUIDE) - Building Control
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Building Controls


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Air-Conditioning System Components—Source Equipment


Air-Conditioning System Components—Source Equipment
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Air-Conditioning System Components -- Source Equipment


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Air-Conditioning System Components—Heat Transfer Equipment


Air-Conditioning System Components—Heat Transfer Equipment
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Air-Conditioning System Components


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
All-Air Reheat Systems


All-Air Reheat Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

All-Air Reheat Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Dual-Duct and Multizone All-Air Systems


Dual-Duct and Multizone All-Air Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Dual-Duct and Multizone All-Air Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Design Strategies and Recommendations: Small Retail Buildings


Design Strategies and Recommendations: Small Retail Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Design Strategies and Recommendations: Small Retail Buildings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Quality Assurance: Small Office Buildings


Quality Assurance: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Quality Assurance: Small Office Buildings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Building Envelope: Small Office Buildings


Building Envelope: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Building Envelope:


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Air-Conditioning System Components—Pumps, Valves, Piping, and Ductwork


Air-Conditioning System Components—Pumps, Valves, Piping, and Ductwork
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Air-Conditioning System Components


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
HVAC Equipment and Systems: Small Office Buildings


HVAC Equipment and Systems: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

HVAC Equipment and Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Bonus Savings: Small Office Buildings


Bonus Savings: Small Office Buildings
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Bonus Savings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
HVAC&R Controls


HVAC&R Controls
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

HVAC&R Controls


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2102 - Types of Protective Relays


2102 - Types of Protective Relays
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objectives of this module is to demonstrate the operation of the most common types of protective relay. This in turn will prepare the participant for succeeding modules which deal with protective schemes often using a combination of these relays. After study of this module, the participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Components of the differential relay, Where differential protection is applied, The differential principle - bus protection, Transformer differential protection, Restraint and harmonic restraint, Components of the overcurrent relay, Instantaneous overcurrent protection, Time-over current protection, Adjustment of pick-up and time dial, Construction of directional relays, The need for directional elements, Operation of directional relays, The induction cylinder relay, Operation of distance relays - balanced beam and MHO type, Circle diagrams, Effect of load impedance, Three-zone elements; back-up protection.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2103 - Monitoring System Conditions


2103 - Monitoring System Conditions
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this tape is to present concepts which are vital tools in the interpretation of system operating conditions. After study of this course and the associated workbook, the participant should be able to understand the following overall concepts and apply them to his/her day-to-day work activities. He/she will also be able to answer test questions on the following subjects: Function of current and voltage transformers, Effect of burden and saturation, CT performance ratings, VT connections, The coupling capacitor VT, Polarity, polarity test, Three phase circuit diagrams, Directional sensing for ground faults, Phasor diagrams, construction and interpretation, Phase rotation - sequence, Per unit calculations, Base voltage and base MVA, OHMIC impedance and per unit impedance, MVA fault capacity.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=4.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2104 - Fault Characteristics


2104 - Fault Characteristics
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this course is to discuss the characteristics of different types of faults, and their effects on the power system. Knowledge of this material is vital to understanding the protective schemes that are presented in future courses. After study of this module and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Effect of load impedance on current flow, Effect of short circuit impedance on fault current, Voltage drop through the system under fault conditions, Impedance phase angle, Safety grounding: the ground mat, Neutral grounding: generator or transformer, Delta system grounding transformer, Aerial ground wires on transmission lines, Limitation of ground fault current through impedance grounding, Ungrounded systems - Hazards and ground fault detection, Phasor diagrams for different types of faults, Resonance, Ferroresonance, Distortion of balanced conditions under the various types of faults, Transposition of balanced conditions at generator to unbalanced conditions at the fault, Production of positive, negative, and zero sequence components, Effect of negative and zero sequence components, Zero and negative sequence relays, Rules for study of symmetrical components.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2108 - Motor Protection


2108 - Motor Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The purpose of this course is to familiarize the participant with the features of motor operation and the most common types of protective devices that are installed. After study of this course and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Motor application: voltage levels, Induction motor characteristics, Torque curves: speed, slip, stall, Potential motor hazards, Starting arrangements, Current - time curves, Thermal limits for overload and start-up, Thermal and time overcurrent protection, Locked rotor protection, Phase fault protection, Ground fault protection, Differential protection, Protection against unbalanced conditions, Undervoltage protection, Synchronous motor protection.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2114 - Fault Investigation and Analysis


2114 - Fault Investigation and Analysis
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this videotape is to demonstrate the various methods that are used to investigate equipment performance during fault conditions. While various types of fault recorders are considered, particular emphasis is placed upon the interpretation of oscillograms. After study of this course and the associated workbook participants should be able to understand the following overall concepts and be able to apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Objectives of fault investigation and analysis, Disturbances, faults, power swings, Gathering of fault data (after the fact), Operational reports, relay targets, Sequence of event recorders (SOER), Oscillograms from digital relays, Features of oscillograph machines: Quick start, Pre-fault, Continuous, Starting sensors: Neutral overcurrent, Zero sequence voltage, Negative sequence voltage, Location of oscillographs on the power system, Selection of data to be monitored, Information available from oscillograms, The need to monitor carrier signals, Coordination of data from all sources for analysis, i.e. relay targets, operational reports, system one-line diagrams, oscillograms and SOERs. Interpretation of data.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Special HVAC Systems


Special HVAC Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Special HVAC Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2105 - Generator Protection


2105 - Generator Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this course is to review the types of fault that can occur on generators and discuss the various protection schemes that are used on both small and large generators. After studying this course and the associated workbook, the participant should be able to understand the following overall concepts and apply them to his day-to-day work activities. He will also be able to answer related test questions on these subjects: Types of prime movers, Generator terminal connections, Generator bus connections, Unit and station service transformers, Generator mechanical problems, General electrical faults, Generator and prime mover tripping arrangements, Phase fault primary protection, Ground fault primary protection, Backup protection, Negative phase sequence protection, Generator capability curve, Loss of field protection, Effect of system disturbances, Generator off-line protection.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2106 - Transformer Protection


2106 - Transformer Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this course is to review the types of faults that can occur in transformers and to present the different protection schemes that are installed on large and small transformers. After study of this course and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Transformer features, Types of faults, Overcurrent protection, Backup coordination, Primary fuses, Differential protection, In-rush current: harmonic filter, Phasing of differential CTs, Selecting CT taps, Calculation of mismatch, Differential protection for multi-winding transformers, Connection of multiple restraint coils, Limitations due to parallel CTs, Single-phase transformer CT connections, Ground (zero-sequence) protection, Directional ground protection, Remote transfer tripping, Thermal relays, Gas pressure relays, Transformer overall protection schemes, Protection of transformers in parallel, Reactor protection, Shunt capacitor protection.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2109 - Line Protection


2109 - Line Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to present the broad categories of line configuration and discuss the various types of protection schemes that are employed. Particular attention is paid to coordination for selective tripping and isolation of faulty circuits. After study of this course and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Classification of lines and feeders, Typical system configurations, Faults on radial and loop systems, Reclosing arrangements, Breaker failure protection, Application of overcurrent relays, Setting of relay pickup and time dial, Coordination with downstream fuses and reclosers, Coordination procedure for loop systems, Maximum and minimum fault levels, Application of instantaneous overcurrent relays, Voltage control (restraint) overcurrent relays, Ground fault protection with directional overcurrent relays, Polarizing sources; current; voltage, Polarizing by negative sequence voltage, Effects of mutual induction, Limitations of overcurrent relays, Characteristics of distance relays, RX diagram, Protection zones; primary and backup, Multiple lines and power sources, Tapped lines; multi-terminal lines, Ground fault protection by distance relays, Backup protection.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2110 - Pilot Protection


2110 - Pilot Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The purpose of this videotape is to familiarize participants with the principles of pilot protection, the various schemes used and the different types of communication channels employed. After study of this course and the associated workbook, participant should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Pilot wire differential protection - 60 Hz signal, Twisted pair - solid conductors, Distance limitations, DC polar units, Effect of pilot wire open circuit or short circuit, Monitoring the pilot wire, Drainage reactors, Effect of ground potential rise, Neutralizing transformer, Communication channels, Power line carrier; on/off mode, PLC, frequency shift keying (FSK), Audio tones, Microwave, Fiber optics, Direct transfer tripping, Directional comparison under-reach, Directional comparison overreach, Phase comparison, Tripping, blocking, permissive commands.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2115 - Introduction to Static Relaying


2115 - Introduction to Static Relaying
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to introduce and present the major features of static relaying, including analog-type solid-state relays and digital microprocessor relays. At this stage in the program, it is assumed that all participants are thoroughly familiar with the functions and characteristics of the different types of relays. This module focuses upon the differences between solid state and electromechanical relays. After study of this tape and the associated workbook, participants should be able to understand the following overall concepts and apply them in their day-to-day work activities. They will also be able to answer related test questions on these subjects: Advantages and disadvantages of static relays, Static relay solid state components: diode, transistor, Transistor circuits, Thyristors, Integrated circuits; operational amplifier, FETs and MOSFETs, Basic relay circuits, Signal level detector, timer, Polarity detector, square wave generator, Phase comparison circuits, Amplitude comparison, Logic circuits, Switching circuits, Relay power supplies, voltage regulation, Examples of solid-state relays, Overcurrent relays, directional relays, Differential relays, distance relays, Digital microprocessor relaying, Signal sampling, analog-digital conversion, Reference algorithms, Function of printed circuit board modules, Monitoring, remote and local, Relay programming, remote and local, Substation control systems.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2117 - Power Supply for Protection and Control


2117 - Power Supply for Protection and Control
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this videotape is to stress the importance of uninterruptible power supplies for protection and control circuits, and to look at different means of achieving this. The provision of both continuous AC and continuous DC power supply is discussed and attention is paid to individual power supplies for electronic equipment. Some time is devoted to studying operation and maintenance of the common storage battery. This area often seems to be neglected, even though it is after all, the heart of uninterruptible power supplies. After study of this tape and the associated workbook participants should be able to understand the following overall concepts, and apply them in their day-to-day work activities. They will also be able to answer related test questions on these subjects: The need for 'reliable' continuous power supplies to operate protection and control relays and circuits. Different voltage level requirements, The lead acid cell; lead antimony; lead calcium, Connection of cells in series to form a storage battery, Ampere hour rating, Battery charge rate, overcharging, Hydrogen release, Significance of specific gravity and output voltage per cell, Equalization procedure, Sulfation, Safety precautions against acid, The nickel cadmium cell, Supply to the DC bus, The SCR battery charger, Control of SCR firing, DC output filter circuit, Charger adjustments: float voltage, equalization voltage, programmed equalization, output slope, and current limiter, The controlled ferroresonant battery charger, The need for uninterruptible AC power supply, The DC to AC inverter, Pulse generation and pulse width modulation, The off-line UPS system, The on-line UPS system, The reverse transfer UPS, The triport UPS system, Power supplies for electronic equipment, The need for clean DC power, The need to shield connecting leads, The transformer rectifier circuit, Features of the filter capacitor, Regulation of DC voltage supply, The series pass transistor regulator, Interference from VHF radios, The switching transistor voltage regulator.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Air-and-Water Systems


Air-and-Water Systems
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

Air-and-Water Systems


**** PRICE: USD 20.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2101 - Elements of System Protection


2101 - Elements of System Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to overview the function of protection schemes, including general protection philosophy and its impact on the operation of the system. After study of this course and the associated workbook, the participant should be able to understand the following overall concepts and apply them to his day-to-day work activities.

If you are taking this course for NERC credit, the following credits will be reported.

CE HOURS=4; OPS Topics=4; Standards=0; Simulation=0; EO=4


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2107 - Bus Protection


2107 - Bus Protection
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to review the different bus layouts that are used in power systems and to present the different protection schemes that are installed to protect against bus faults. After study of this course and the associated workbook the participant should be able to understand the following overall concepts and apply them to his/her day-to-day work activities. He/she will also be able to answer related test questions on these subjects: Features of different bus arrangements, Single breaker - single bus, Single buses connected with bus tie breaker, Main and transfer buses with single breaker, Single breaker - double bus, Double breaker - double bus, Ring bus, Breaker-and-a-half bus, Special problems of bus protection, The ground fault bus, Partial differential protection with overcurrent relays, Directional comparison schemes, Residual current differential schemes, CT saturation problems, Multi-restraint relays, Linear coupler, High impedance relays.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2111 - Protection for System Stability


2111 - Protection for System Stability
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The purpose of this videotape is to present protection schemes that are used to assist in maintaining system stability. The concept of steady-state operation and dynamic response is demonstrated with particular reference to the power angle curve. The physical consequences of instability are also discussed. After study of this course and associated workbook, participants should be able to understand the following overall concepts and be able to apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Power transmission, Steady-state operation, Function of turbine governor and voltage regulator, Power transfer equation, Effect of change in V, XL and power angle, Critical power angle 90º, Dynamic response - rotor inertia, Power angle curve - equal area concept, Loss of transmission line, Effect of initial loading, Phase-to-phase faults, Automatic reclosing of transmission lines, Automatic reclosing of distribution lines, Limitations of automatic reclosing, Synchrocheck relays, Single pole tripping and reclosing, Instability out-of-step operation, Load swings, Voltage profile - effect on distance relays, Out-of-step relays, blocking and tripping, Load shedding, Frequency relays.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=4.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2112 - Testing and Commissioning of Protective Schemes


2112 - Testing and Commissioning of Protective Schemes
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this course is to present and discuss the many factors involved in commissioning new power installations, placing particular emphasis on the testing of protective schemes. After study of this course, participants should be able to understand the following overall concepts and apply them to their work activities. They will also be able to answer test questions on these subjects: Objectives of commissioning tests, Coordination of commissioning activities, Safety requirements, The need for documentation, Review of block diagrams, Inspection of primary installation, Review of protection schematics and wiring diagrams, Checking of secondary wiring, IR and continuity, Checking of control wiring, energizing the DC system, Testing VTs for insulation, ratio, polarity, Testing CTs for insulation, ratio, polarity, and excitation, Testing CT connections, Testing and calibrating relays, Secondary injection tests, Functional testing of protection schemes, Primary injection tests, Requirements prior to energization, Tests for phasing and phase sequence, In-service tests with load applied, Company test procedures and records.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2113 - Power Line Carriers


2113 - Power Line Carriers
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this videotape is to present a more detailed examination of power line carrier (PLC) systems. Earlier tapes looked at the protection schemes that employ PLC as the communication medium. This course focuses upon the PLC equipment itself. After study of this tape and the associated workbook, participants should be able to understand the following overall concepts and apply them to his day-to-day work activities. They will also be able to answer related test questions on these subjects: Principle of line traps, Inductors, series resonance with bus, LC line traps, parallel resonance, High Q and low Q traps, Two frequency traps, Wide band traps, Tuning line traps, Coupling capacitor grounding equipment, Carrier signal injection, Line tuning equipment, Impedance matching, Reflectivity, Standing wave test, Coaxial cable, Signal loss attenuation, Expression for loss in dB, Table: dB loss versus power ratio and voltage ratio, Examples of dB loss, dBm - examples, Loss between adjacent transmitter and receiver, Hybrid units, Transmitter basic components, Transmitter tests and adjustments, Receiver basic components, Receiver tests and adjustments, Line and coupling equipment tests, Special test equipment, Overall trip tests, Audio signals, frequency band, Modulation and demodulation, Upper and lower sidebands, SSB carrier equipment and features.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2118 - Energy Center Operations


2118 - Energy Center Operations
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to review, for the benefit of relay personnel, the responsibilities of the power system operators and the activities that take place in the energy control center. The operation of protection schemes is of vital importance to the correct functioning of the power system. Complete cooperation between power system operators and relay personnel is essential, and communication must be maintained in both directions. After study of this course and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: The overall objectives of the power system operator, Clearance procedures, i.e. isolation of equipment, Frequency control: economic load dispatch, Daily load forecast, Daily generation schedule, including spinning reserve, System overload, falling frequency, load shedding, Inter-ties to neighbouring utilities, power interchange, Generation unit characteristics, i.e. type of prime mover, Incremental cost of generation, Rate of start-up and load change availability, Frequency control by AGC (automatic generation control), Turbine governor droop characteristic, Generator load angle, Control of excitation, reactive power, Transmission line impedance characteristics, Effect of conductor resistance, i.e. heating, Shunt capacitance, charging current, Ferranti effect, Special switching procedure on long lines, Inductive voltage drop along transmission lines, Shunt capacitors and shunt reactors, Power angle across transmission lines, Effect of transmission line voltage on power transfer, Power transfer distribution through a complex network, Power angle limit for stability, System operator actions to improve system stability, Effect of equipment outages on system operation, Planned outages, system operation precautions, Forced outages; states of 'alert' and 'emergency', System separation, i.e. islanding, Energy center communications, Energy center information presentation.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=4.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2121 - Supervisory Control System (SCADA)


2121 - Supervisory Control System (SCADA)
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this course is to discuss the application of SCADA systems (EMS, and DISTRIBUTION AUTOMATION), and to present the main features of modern installations including equipment layout, communications, operations and maintenance. After completion of this videotape and associated workbook, the participant will be able to understand the following concepts, and apply them to his day to day work activities. He will also be able to answer related test questions: Typical applications of SCADA, Basic features of SCADA, i.e. remote data collection, transmission, processing, display, remote control, Polling by RTU address, RTU reporting by exception; 2 second updates, Control commands; select - check - operate sequence, RTU data collection, Analog points, transducers, analog digital conversion, RTU inputs; analog, status points, pulse accumulation, RTU outputs; control of switching, load shedding, generation, Review of binary numbering system, Modems, signal transmission, FSK, PSK, A.M. Rate of signal transmission, baud, Components of 32 bit signal, Communication line arrangements, i.e. party-line, or separate radial connections, Master station assembly and peripherals, Front-end communications controller: functions, Display computer, display stations, operator input, Standby (redundant) station, failover, Applications software, executive software, CPU priority tasking, On-line diagnostics, Operator interface, workstations, Operator input, display response, Power system equipment status, tagging, Alarm system, Logging, reports, trends, sequence-of-events, SCADA installations, power supply, Preventive maintenance activities, Functional tests, test sets, test points, Software update, modification, Maintenance records.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2116 - Coordination of Protection Devices


2116 - Coordination of Protection Devices
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this tape is to present a more detailed study of the subject of 'coordination' of protective devices, particularly in the area of distribution systems. After study of this course and the associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: The coordination problem, Sensitivity and selectivity, Inverse time characteristic of protection devices, Expulsion fuses, Current limiting fuses - High Rupturing Capacity (HRC), Fuse curves, Minimum melt and damage curves, Fuse coordination procedure, Coordination of fuse with overcurrent relays, Coordination of capacitor bank fuses, Recloser application, Recloser characteristics, Fast and slow recloser curves, Function of sectionalizers, Voltage restraint sectionalizers, Coordination of reclosers, sectionalizers and fuses, Conductor damage curve, Industrial consumer protection devices, Low voltage circuit breakers.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2119 - Telecommunications Protection I: HVSP Devices


2119 - Telecommunications Protection I: HVSP Devices
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The objective of this module is to draw attention to the high voltage hazards that can occur on telecommunication circuits entering substations and power stations, and to review the protection devices that are used to combat this problem. After study of the videotape and the associated workbook the participants should be able to understand the following overall concepts and apply them in their day-to-day activities. They will also be able to answer test related questions on these subjects: Communication line interface, Routing of telephone cables by Telco, Effect on telephone lines of power system faults, Longitudinal common mode induction, GPR - Ground Potential Rise, Remote ground and local ground, High voltage hazards to personnel and equipment, Location of demarcation interface, Standard telephone line protection, Air gap arrestors, Carbon block protectors, Gas tube protectors, Solid-state protectors, Limitations of protectors, Disadvantage of voltage clamping (i.e. circuit shut down), Mutual drainage reactor, High voltage interface, Dedicated entrance cable; features, Grounding of dedicated cable, High voltage special protection, Neutralizing transformer, Neutralizing reactor, Isolation transformers, High voltage relay for DC signals, Safety precautions for personnel, Optical isolators: teleline isolator, TUCON fiber optic link, Fiber optic cable and multiplexer.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
2120 - Telecommunications Protection II: Installation and Configuration


2120 - Telecommunications Protection II: Installation and Configuration
Trades and Engineering > Engineering PDH > Illinois
360Training Product Catalog
Description :

The purpose of this videotape is to continue on from SPT 19 the discussion of telecommunications protection. While SPT 19 presented protection devices, this module focuses on specific installation practice and typical configurations. After study of the course and associated workbook, participants should be able to understand the following overall concepts and apply them to their day-to-day activities. They will also be able to answer related questions on these subjects: Definition of types of communication service, Definition of SPO classification; A, B, C, Level of voltage rise at station, Protection requirements for different SPO classification and voltage level rise, HVSP configurations for different circuits, Location of protection (TELCO, RDL, HVI, NI), Selection and limitation of protectors, Grounding arrangements at RDL, TELCO and HVI, Grounding of dedicated cable sheath, Isolating of dedicated cable sheath, Surge arrester connections, Centre tapped isolating transformer as MDR, Location and mounting of HVI cabinet, Grounding of HVI, Installation of neutralizing transformer (typical), Need for rubber gloves, Primary winding connections to station and RDL grounds, Use of spare conductors in dedicated cable, Protection of unassigned pairs in dedicated cable, Connection of secondary windings, Insulation of isolating transformer (typical), HVI layout, terminal strips, ground bus, Remote side wiring, Station side wiring, Cable connections, Connection of protectors and MDRs, Circuit identification and documentation, Modular HVI, Installation pitfalls, Maintenance and inspection items, Safety considerations.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


**** PRICE: USD 85.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems -  Introduction to HVAC Control Systems


Fundamentals of HVAC Control Systems - Introduction to HVAC Control Systems
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Introduction to HVAC Control System


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Control Valves and Dampers


Fundamentals of HVAC Control Systems - Control Valves and Dampers
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Control Valves and Dampers


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Sensors and Auxiliary Devices


Fundamentals of HVAC Control Systems - Sensors and Auxiliary Devices
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers the terminology and attributes of sensors, the selection of moisture sensors, pressure, flow and auxiliary devices.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Self- and System-Powered Controls


Fundamentals of HVAC Control Systems - Self- and System-Powered Controls
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course provides the electrical knowledge needed to understand controls and the use of electrical circuit drawing.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Introduction to HVAC Design


Fundamentals of HVAC Systems - Introduction to HVAC Design
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course is an introduction to air-conditioning, the enviromental factors influencing comfort, and how to determine and prioritise system design objectives.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Introduction to HVAC Systems


Fundamentals of HVAC Systems - Introduction to HVAC Systems
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers how to understand and use simple psychrometric charts, description of basic system components and operation of the economizer cycle.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Introduction to Zones


Fundamentals of HVAC Systems - Introduction to Zones
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Introduction to Zones


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Single Zone Air Handlers and Unitary Equipment


Fundamentals of HVAC Systems - Single Zone Air Handlers and Unitary Equipment
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers calculating and mixed air temprature with Single-zone Air Handlers and Refrigeration Equipments.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Outdoor Air Quality


ASHRAE Standard 62.1 - Outdoor Air Quality
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Outdoor Air Quality - What is in the air outside?


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Basics of Electricity


Fundamentals of HVAC Control Systems - Basics of Electricity
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Basics of Electricity


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Pneumatic Controls


Fundamentals of HVAC Control Systems - Pneumatic Controls
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

The course covers the components of pneumatic system and control applications diagrams.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Analog Electronic Control


Fundamentals of HVAC Control Systems - Analog Electronic Control
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers the understanding of wiring conventions, application-specific electronic controllers and how to use them in HVAC applications.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Ventilation and Indoor Air Quality


Fundamentals of HVAC Systems - Ventilation and Indoor Air Quality
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers the understanding types, sources and effects of air contaminants and how to control them and the basic concepts of ASHRAE standard 62.1.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Control Diagrams and Sequences


Fundamentals of HVAC Control Systems - Control Diagrams and Sequences
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers the use of written specifications , scedules and drawings and to clearly identify what is to be installed, how it is to be installed and how it is expected to operate.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Electric Controls


Fundamentals of HVAC Control Systems - Electric Controls
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course is an introduction to electric controls, control diagrams and control logic.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Thermal Comfort


Fundamentals of HVAC Systems - Thermal Comfort
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course covers understanding the factors determining thermal comfort and the comfort envelope to design systems that operate within acceptable range. "


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - Introduction to DDC Hardware and Software


Fundamentals of HVAC Control Systems - Introduction to DDC Hardware and Software
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

This course explains Direct Digital Controls (DDC) components, their inputs and outputs, and the programming of DDC routine.


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Multiple Zone Air Systems


Fundamentals of HVAC Systems - Multiple Zone Air Systems
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Multiple Zone Air Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Hydronic Systems (I-P)


Fundamentals of HVAC Systems - Hydronic Systems (I-P)
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Hydronic Systems


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Outdoor Air Intakes and Exhaust


ASHRAE Standard 62.1 - Outdoor Air Intakes and Exhaust
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Outdoor Air Intakes and Exhaust - How to get 'good' air inside and 'bad' air outside


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Central Plants


Fundamentals of HVAC Systems - Central Plants
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Central Plants


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Control Systems - DDC Networks and Protocols


Fundamentals of HVAC Control Systems - DDC Networks and Protocols
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

DDC Networks and Controls Protocols


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Hydronic System Architecture


Fundamentals of HVAC Systems - Hydronic System Architecture
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Hydronic System Architecture


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Controls


Fundamentals of HVAC Systems - Controls
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Controls


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Energy Conservation


Fundamentals of HVAC Systems - Energy Conservation
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Energy Conservation Measures


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Fundamentals of HVAC Systems - Special Applications


Fundamentals of HVAC Systems - Special Applications
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Special Applications


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Recirculating and Treating Indoor Air


ASHRAE Standard 62.1 - Recirculating and Treating Indoor Air
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Recirculating and Treating Indoor Air - Good air separation makes good neighbors


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
VRP Multiple Zones VAV - An approach to saving fan energy


VRP Multiple Zones VAV - An approach to saving fan energy
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

VRP Multiple Zones VAV - An approach to saving fan energy


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Natural Ventilation and Exhaust


ASHRAE Standard 62.1 - Natural Ventilation and Exhaust
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Natural Ventilation and Exhaust - The historical approach to ventilation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Indoor Air Quality Procedure (IAQ) – the scientific approach to ventilation


Indoor Air Quality Procedure (IAQ) – the scientific approach to ventilation
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Indoor Air Quality Procedure (IAQ) - the scientific approach to ventilation


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
ASHRAE Standard 62.1 - Purpose: Why We Ventilate Buildings


ASHRAE Standard 62.1 - Purpose: Why We Ventilate Buildings
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Purpose - Why We Ventilate Buildings


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page
Commissioning


Commissioning
Trades and Engineering > Engineering PDH > Indiana
360Training Product Catalog
Description :

Commissioning


**** PRICE: USD 95.00
Manufacturer : 360training.com
Tags: Education. Courses. School Supplies.

Start of page

 

 

 


www.sapiensman.com