QSC RMX 4050HD 2-Channel Power Amplifier

The QSC RMX 4050HD 2-Channel Power Amplifier is designed to work as hard into 2-ohm loads as most competing amps will at 4 ohms, this 3-tier. The Class H design is extremely efficient. Delivers 1,600W/ch @ 2 ohms, 1,300W @ 4 ohms, 800W @ 8 ohms, and 2,600W @ 8 ohms bridged. It features a dual-mono high-current power supply; high-current toroidal transformers; independent user-defeatable clip limiters; selectable low-frequency filters (30Hz or 50Hz); balanced 1/4" TRS, XLR, and barrier strip inputs; binding post and Neutrik Speakon outputs; front-mounted gain control; signal and clip LEDs. 3U rackmount chassis is only 16" deep.

Peavey JSX Joe Satriani Signature Head

Joe Satriani is undoubtedly one of the greatest guitar players of all time, and Peavey has built him an amp with the sound, feel, and flexibility he's always sought. With a punchy gain structure that boosts your playing with authority, this amp delivers sounds ranging from Classic 50 to vintage British, modern Triple XXX, and all the in-between tones.The versatile and comprehensive control section supplies a master volume pot and independent volume knobs for each of the three channels (Ultra, Crunch, and Clean). Tone shaping is accomplished through passive controls for Bass, Mid, and Treble on the Clean channel, while the Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls. The Clean channel is pristine yet warm and is specifically voiced to work well with effects pedals. The Ultra and Crunch channels have gain controls and fat switches to further assist in taming this thunderous tube-powered beast while achieving killer sound.Global resonance and presence knobs increase control of high-end tones, while a noise gate on the Crunch and Ultra channels cuts down on the excess noise generated by running the gain and EQ controls on high settings. Since the gate is fully adjustable, you can really clamp down, leave it slightly open, or just turn it off.The JSX uses 3 - 12AX7 preamp tubes and 4 - EL34 power amp tubes. The power amp section delivers an earth-quaking 120W of pure tube...

Peavey CS 4080HZ Power Amplifier

The CS Series is the global standard bearer for workhorse reliability. These amps benefit from Peavey's most popular audio innovations, including exclusive DDT compression/anticlipping protection. Circuitry protects against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.Have different needs than this amp provides? Check out the rest of the CS Series: 2-channel models: CS 1400 CS 2000 CS 3000 CS 40004-channel CS 800 x 4

Line 6 HD147 Guitar Amp Head

The Line 6 HD147 Guitar Amp Head starts with models of 10 essential modern high-gain amps and 8 coveted vintage models. The Line 6 designers then took the best attributes of every great high-gain amp to create 14 Line 6 custom amps that are truly outrageous. With 300W of power, it delivers everything from the obscene to the sparkly clean with headroom to spare. Includes 12 vintage effect models, stereo XLR outputs, and MIDI compatibility, allowing access to Line 6's ToneTransfer Library (in development). All encased in a beautiful chrome chassis.

Gibson GA40RVT 30W Class A Amplifier with Tube Reverb and Tremolo

Point-to-point wiring, metal film resistors, hand-wired turret board, and a pentode/triode switch to give you hot distortion at half wattage. 5 - 12AX7 preamp tubes, 2 - 6L6 power tubes pour out real-deal vintage tone. 2 channels plus a mix input provide pro flexibility.

QSC PLX3602 Lightweight Professional Power Amplifier

For users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required, the PLX3602 power amplifier is an excellent choice . Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3602 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio Quality PLX2 audio power circuitry achieves performance normally...

Fender Twin Amp 100-Watt All-Tube Guitar Amp

Look inside the Fender Twin Amp 100-Watt All-Tube Guitar Amp and you can see 'em in there, glowing with that warm, rich, physical juice a broad river of power to carry your guitar's tone. We're talking classic Fender tone with tube reverb and tremolo. A pair of the same 12" Eminence speakers found on the '65 Twin Reverb crank out bell-like tones from the Blackface-style normal channel and thick, bold lead sounds from the overdrive channel. 1/4-power switch lets you cook without blasting the walls down. Includes 4-button footswitch and cover.

Crown 180MAxPACK Amplifier with 4 JBL Control 1ST Speakers

The Crown 180MAx is the first integrated tuner mixer-amplifier designed for commercial use. Applications include restaurants, retail stores, coffee shops, and other commercial establishments.The system includes the Crown 180MAx tuner-mixer-amplifier, four JBL Control 1ST 2-way miniature loudspeakers with built-in 25V/70V transformers, XM antenna and a wireless remote control.Built into the 180MAx is an XM Radio tuner that receives satellite radio stations with digital sound quality. A front-panel LCD screen displays XM Radio channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength.The unit also accepts signals from line, telephone, or microphone (phantom power included). Bass and treble controls allow the user to tailor the tone quality of the sound system. The priority ducking feature drops the volume of the background music when a microphone is used. A VOX sensitivity setting controls how loud the voice must be before ducking occurs. Units can be linked to increase the number of input and output channels.The built-in power amplifier provides 80 watts into 4 ohms, 25V and 70V for use with the JBL Control 1ST loudspeakers. Current and thermal limiting protect the amplifier and loudpeakers from accidental overload.

QSC PLX3102 Lightweight Professional Power Amplifier

For users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required, the PLX3102 power amplifier is an excellent choice . Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio Quality PLX2 audio power circuitry achieves performance normally...

Peavey CS 4000 Power Amplifier

The CS Series is the global standard bearer for workhorse reliability. These amps benefit from Peavey's most popular audio innovations, including exclusive DDT compression/anticlipping protection. Circuitry protects against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.Have different needs than this amp provides? Check out the rest of the CS Series: 2-channel models: CS 1400 CS 2000 CS 3000 CS 4080HZ4-channel CS 800 x 4

Fender Super-Sonic Head Guitar Amp Black

The best of vintage Fender tube amp design with modern refinements that make it more flexible. It features a dual cascading-gain preamp for thick, smooth overdrive, 2 footswitchable channels (Vintage and Burn), a choice of sparkling Vibrolux or thick Bassman voicing on the Vintage channel, and 60W of power from 2 6L6GC tubes. Effects loop with levels, preamp out, power amp in-this is a pro class amplifier all the way.

Trident 4T Celebration Channel Strip

A single rackspace of Trident and Oram design ecellence features a superb mic pre, EQ Magic, precision VU metering, dtereo input, and compresser. Great for live gigs, the Trident 4T Celebration Channel Strip has an input for your guitar or synth, an XLR mic input for your vocal, and the ability to mix these 2 signals along with a stereo backing track coming into the rear-panel line level inputs. For home recording, use the stereo input for monitoring your DAW's soundcard output. An instrument input adds live-gig possibilities.

Mackie Onyx 800R 8-Channel Preamp w/192kHz Digital Out

This one-rackmount unit features 8 flagship Onyx preamps, audiophile-grade components, and analog circuitry for outstanding studio performance. The Mackie Onyx 800R Preamplifier features variable input impedance; front-panel mic/line switches on every channel; 2 front-panel instrument input jacks; and low cut, phase, and phantom power on every channel deliver flexibility. Immaculate digital audio connectivity via AES/EBU, ADAT lightpipe, and S/PDIF featuring 24-bit/192kHz A/D converters built to be the best in the industry. Rackmount chassis.

Fender Super-Sonic Head Guitar Amp

The best of vintage Fender tube amp design with modern refinements that make it more flexible. It features a dual cascading-gain preamp for thick, smooth overdrive, 2 footswitchable channels (Vintage and Burn), a choice of sparkling Vibrolux or thick Bassman voicing on the Vintage channel, and 60W of power from 2 6L6GC tubes. Effects loop with levels, preamp out, power amp in-this is a pro class amplifier all the way.

Crown XTI 4000 Power Amplifier

1,600W/ch @ 2 ohms, 1,200W/ch @ 4 ohms, 650W/ch @ 8 ohms, 3,200W bridged mono @ 4 ohms, and 2,400W bridged mono @ 8 ohms. The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon, and binding-post outputs, short-circuit protection and more.

Aguilar AG 500SC Single Channel Bass Head

Combine 500 watts of power with a 4-band active EQ and you have an amp for any style of music and any size venue. With a blendable FX loop, pure-sounding D.I., and tuner out this versatile head has all of the professional features without the price.

Gibson Plexiglas GA-5 Les Paul Junior Guitar Amplifier

A limited-edition tribute to the Les Paul-designed LP Junior of the '50s, the GA-5 produces vintage tone in a powerful, portable package using single-ended, Class A tube circuitry. Pushing out a feisty 5W of power, the GA-5 features hand-wired, turret board circuitry for maximum signal and tone. An 8" Gibson Goldtone speaker delivers creamy sound and the Plexiglas cabinet reveals the gutsy innards of this little tone monster.

QSC PLX2502 Lightweight Professional Power Amplifier

For users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required, the PLX2502 power amplifier is an excellent choice . Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX2502 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio Quality PLX2 audio power circuitry achieves performance normally...

Peavey CS 800X4 Power Amplifier

The CS Series is the global standard bearer for workhorse reliability. These amps benefit from Peavey's most popular audio innovations, including exclusive DDT compression/anticlipping protection. Circuitry protects against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.Have different needs than this amp provides? Check out the rest of the CS Series: 2-channel models: CS 1400 CS 2000 CS 3000 CS 4000 CS 4080HZ

Crown XTi 1000 Power Amplifier

700W/ch @ 2 ohms, 500W/ch @ 4 ohms, 275W/ch @ 8 ohms, 1,400W bridged mono @ 4 ohms, and 1,000W bridged mono @ 8 ohms. The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon, and binding-post outputs, short-circuit protection and more.

Roland KC-350 120W Keyboard Mixing Amp

The Roland KC-350 120W Keyboard Mixing Amp is the perfect gig amp. It sounds great and has ample output for up through medium-size gigs. With a 120W amp, 12" speaker and horn tweeter, 4-channel operation, 3-band EQ, XLR mic input, output select switch, and shape switch for quick tonal adjustment. Connectivity includes an XLR line out for connecting to mixing consoles, a 1/4" out for connecting to recording devices, a subwoofer output compatible with Roland's KCW-1, and a stereo link in/out for chaining two KC-350s for stereo performance.

Marshall AVT50HX 50 Watt Amp Head

The AVT50HX is the head version of the AVT50X combo and is armed with the exact same killer features and tones. When driving the purpose-built AVT412XA (angled) and AVT412XB (straight) Celestion-loaded 4x12 cabinets, it delivers the extra depth and sheer total weight which only a Marshall stack or half stack is capable of!If you believe that 50 watts of solid-state power isn t sufficient to gig with, then think again, because the AVT50X is definitely the exception to that rule! Its two footswitchable channels deliver glistening ECC83-driven clean tones and a roaring crunch that just oozes vintage authenticity. Contemporary, high gain sounds that pack an unbelievable focus and punch are also possible, thanks to the extremes of gain available, coupled with the closed-back cabinet and custom 12 Celestion speaker. Other features include a CD input, a headphone jack for silent practice , a speaker Emulated DI output, an Accoutronics Spring Reverb, a Series FX Loop and s sturdy LED footswitch (supplied).

Ampeg BA115T 1X15 100 Watt Bass Combo Amp

12AU7 preamp tube and a piezo tweeter for additional punch and tonal clarity at the upper end. Line out, 3-band EQ, Style control, and padded input option in a robust, tilt-back enclosure.

Ampeg B410HE 4X10 Speaker Cabinet

The B410HE speaker cab delivers classic Ampeg tone through 4 - 10" Ampeg drivers. 1" horn handles the highs, with a 3-position attenuator controlling the mix. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling.

Yamaha BBT500H 500W Digital Bass Amp Head

Delivers 500 punchy, class-D watts into 2 cabs, yet it weighs less than 11 pounds! Select from 11 of your favorite bass amp sounds, dial up the programmable parametric EQ and compressor, and store your favorite combinations to 5 front-panel presets. Add to that a noise gate, parallel effects loop, speaker simulator, MIDI capability, variable crossover, headphone and tuner outs, and you've got one heavy package-figuratively speaking. We have BBT cabs, designed to match the BBT500H perfectly. They're available in a single 10" cab, a 2 x 10" cab, and a 4 x 10" cab.