10, 000 Hour Meter

$24.99

1in. x 2in. gauge mounts into dash of your heavy equipment and connects directly to electrical system. Range: 10-80V DC. Auto reset at 10, 000 hours. U.S.A. Display Shows: Hours, Works With: Heavy equipment, Dimensions W x D x H (in.): 1 x 2, Capacity: 10, 000 Hours [Read more]

Store: NorthernTool.com

110V Electric Starter Kit, Model# 29

$149.99

For fast, easy starts. Fits Tecumseh 8 and 10 HP vertical engines VM80 and VM100 as well as Tecumseh 8 and 10 HP horizontal engines HM80 and HM100. U.S.A. Engine: 110 Volt, Engine Type: Electric, HP: 8 - 10 Kit Includes: Starter Switchbox Switchcord Screws WARNING: Must be plugged into a 110 Volt, 3-wire GFCI receptacle Do not use in the rain [Read more]

Store: NorthernTool.com

12 Volt Electric Starter for Kohler from Oregon Equipment Parts, Model# 33-714

$159.99

Replacement 12V electric starter motor; solenoid shift style. Fits Kohler models CH12.5, 13, 14, 15, 18, 20, 22, 25 and CV12.5, 15, 15S, 16, 18, 20, 22, 25. Replaces Kohler OEM #12-098-03. Engine: Kohler, Engine Type: 12V electric, Application: Replacement Fits many Kohler vertical and horizontal shaft engines [Read more]

Store: NorthernTool.com

12V Electric Starter Briggs & Stratton Single Cylinder Aluminum Block Engines, Model# 693551

$149.99

Replacement 12 Volt electric starter motor for Briggs & Stratton single cylinder aluminum block engines with a metal ring gear on the flywheel, Model #693551. Engine: Single cylinder, Engine Type: Electric Fits most Briggs & Stratton single cylinder aluminum block engines with metal ring gear on the flywheel [Read more]

Store: NorthernTool.com

Boss MagnaFilter Magnetic Pre-Oil Filter For All Cummins V8 Diesel Engines, Model# 3701016

$29.99

The Boss MagnaFilter uses magnets to trap and remove metal particles produced through normal wear and tear. Removing these particles increases fluid efficiency and extends engine life. Contact your sales representative for specific model information. Filter uses magnets to trap and remove metal particles produced through normal wear and tear Removing these particles increases fluid efficiency and extends engine life Protects for up to 50, 000 miles Screws on top of your spin-on oil filters Kit includes filter and threaded insert For all Cummins V8 diesel engines Contact your sales representative for specific model information [Read more]

Store: NorthernTool.com

Briggs & Stratton 1550 Series Engine 342cc, 1in. dia. x 2 21/32&Quot;L Shaft, Model# 21S132-0036-F1

$519.99

Briggs & Stratton 1550 series engine starts quick and works great with tillers, compressors and log splitters. U.S.A. Displacement (cc): 342, Shaft Dimensions Diameter x L (in.): 2 21/32 x 1, Application: Tillers, compressors, log splitters, Torque (ft./lbs.): 15.5, Shaft Output: Horizontal, Engine Type: 1550 Series, Start Type: Recoil, Mounting Base L x W (in.): 7 3/4 x 4, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/1620, Max. RPM: 3, 600, Ignition System: Magnetron electronic, Fuel Tank Capacity (qt.): 4, Air Cleaner Type: Automotive-type foam, Muffler Included: Yes, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 3.3 x 2.44, Cylinder Bore: Cast iron, Carburetor: Float, Dimensions L x W x H (in.): 16 x 16 x 16, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: NorthernTool.com

Briggs & Stratton 525 Series Engine 148cc, 3/4in.dia. x 2 5/16in.L Shaft, 3300 RPM Model# 97302-0016-F1

$349.99

Briggs & Stratton 1550 series engine is great with tillers, compressors and log splitters. Automotive-type air filter ensures long life. U.S.A. 3300 RPM 5.25 ft.-lbs. Gross Torque Magnetron electronic ignition for quick, dependable starts Recoil start Aluminum alloy bore for cooler operation 3 5/8in. flange mount bolt circle 6 3/8in.L x 3 1/8in.W base 3/4in. dia. x 2 5/16in.L shaft Automotive-type air filter for long life For tillers, compressors, or log splitters EPA/CARB compliant [Read more]

Store: NorthernTool.com

Briggs & Stratton 675 Series Engine 1in.dia. x 3 5/32in. Horizontal Shaft Model# 126L02-1031-F1

$209.99

The Briggs & Stratton 675 series engine is designed to work with Toro lawn mowers. Maintenance-free Magnetron electronic ignition guarantees an easy start, everytime. Application: Toro lawn mowers, Torque (ft./lbs.): 6.75, Shaft Output: Vertical, Engine Type: 675 series, Mounting Base L x W (in.): 8, Ignition System: Magnetron electronic, Air Cleaner Type: Dual element, Cylinder Bore: Aluminum alloy, Carburetor: Float feed, EPA/CARB Approval (California Air Resource Board): Yes Works with Toro personal pace mowers 6.75ft.-lbs. Gross Torque Ready Start system, mechanical compression, and large rewind starter make starting easier Maintenance-free Magnetron electronic ignition Float-feed carburetor Mechanical torque control for additional power Aluminum alloy bore for cooler operation Dual element filter with paper and foam pre-cleaner 8in. mounting base EPA/CARB compliant [Read more]

Store: NorthernTool.com

Briggs & Stratton 675 Series Engine 7/8in. Vertical Shaft, Model# 126L02-1010-F1

$209.99

The Briggs & Stratton 675 series engine is designed to work with Toro lawn mowers. Maintenance-free Magnetron electronic ignition guarantees an easy start, everytime. Displacement (cc): 190, Application: Toro blade brake control mowers, Torque (ft./lbs.): 6.75, Shaft Output: Vertical, Engine Type: 675 Series, Start Type: Recoil, Shaft End Tapped (in.): 7/1620, Max. RPM: 3, 100, Ignition System: Magnetron electronic, Fuel Tank Capacity (qt.): 1.6, Air Cleaner Type: Paper and foam, Muffler Included: Yes, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.04, Cylinder Bore: Aluminum, Carburetor: Float, Dimensions L x W x H (in.): 13 x 11 1/2 x 9 3/4, EPA/CARB Approval (California Air Resource Board): Yes Ready Start system, mechanical compression Mechanical torque control for additional power 8in. mounting base [Read more]

Store: NorthernTool.com

Briggs & Stratton 875 Series Vertical OHV Engine 190cc, Model# 12S502-0025-B1

$269.99

This Briggs & Stratton 875 Series vertical engine is an ideal choice for a replacement engine for push mowers. U.S.A. Not for use with riding mowers. Not for sale in California. Displacement (cc): 190, Shaft Dimensions Diameter x L (in.): 22mm x 3 5/32, Application: Walk behind lawn mower, Torque (ft./lbs.): 8.75, Shaft Output: Vertical, Engine Type: OHV, Start Type: Recoil, Bolt Circle (in.): 8, Max. RPM: 3, 100, Ignition System: Magnetron electronic, Oil Capacity (qt.): 22-oz, Air Cleaner Type: Dual element, Muffler Included: Yes, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.04, Cylinder Bore: Cast iron, Carburetor: Float, Governor System: Mechanical, Dimensions L x W x H (in.): 18.7 x 15.3 x 15.7 8.75 ft.-lbs. Gross Torque Shaft 25mm x 3 5/32in. OHV design for cooler operation, longer valve life Magnetron electronic ignition Recoil start; One-Start float carburetor Aluminum alloy bore for cooler operation Dual-Clean air filter Muffler and exhaust m... [Read more]

Store: NorthernTool.com

Briggs & Stratton 900 Series CARB Compliant OHV Engine 205cc, 3/4in. x 2&Quot; Shaft, Model# 12S452-0549-F8

$429.99

This Briggs & Stratton OHV replacement engine features 6:1 gear reduction, making it ideal for cement mixers and pumps. CARB compliant engine is good for sale in all states, including California. Displacement (cc): 205, Shaft Dimensions Diameter x L (in.): 3/4 x 2 (Gear reduction), Application: Cement mixers and pumps, Torque (ft./lbs.): 9, Shaft Output: Horizontal, Engine Type: CARB OHV, Start Type: Recoil, Mounting Base L x W (in.): 6.38 x 3.13, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 5/1624, Max. RPM: 3600, Ignition System: Magnetron Electronic, Oil Capacity (qt.): 5/8 (20oz.), Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Compression Ratio: 6:1, Bore x Stroke (in.): 2.69 x 2.20, Cylinder Bore: Cast iron, Carburetor: Float type, Governor System: Mechanical, Dimensions L x W x H (in.): 12.4 x 16 x 17, EPA/CARB Approval (California Air Resource Board): Yes CARB compliant engine; good for s... [Read more]

Store: NorthernTool.com

Briggs & Stratton Air Filter 12.5 to 17 HP, Model# 5053D

$16.99

12.5-17 HP single cylinder engines. Includes pre-cleaner. B&S Service Part #496894S (Filter), #272403S. (Pre-cleaner). B&S Packaged Part #5053D. U.S.A. Application: Air filter, Works With: Briggs & Stratton, HP: 12.5 - 17 [Read more]

Store: NorthernTool.com

Briggs & Stratton Air Filter 12.5 to 20 HP, Model# 5050D

$15.99

For 12.5-20 HP horizontal crankshaft L-head twin cylinder and Vanguard OHV V-twin engines. Includes pre-cleaner. B&S Service Part #394018S (Filter), #272490S (Pre-cleaner). B&S Packaged Part #5050D. U.S.A. Application: Air filter, Works With: Briggs & Stratton, HP: 12.5 - 20, Engine Type: OHV [Read more]

Store: NorthernTool.com

Briggs & Stratton Air Filter 12.5 to 20 HP, Model# 5052D

$15.99

For 12.5-20 HP vertical crankshaft L-head twin cylinder engines. Includes pre-cleaner. B&S Service Part #394019S (Filter), #272490S (Pre-cleaner). B&S Packaged Part #5052D. U.S.A. Application: Air filter, Works With: Briggs & Stratton, HP: 12.5 - 20, Engine Type: Vertical [Read more]

Store: NorthernTool.com

Briggs & Stratton Air Filter 3 1/2 and 3.75 HP Classic and Sprint after 92, 4HP Quattro

$4.99

3 1/2 and 3.75 HP Classic and Sprint after 92 and 4HP Quattro engines. U.S.A. Application: Air filter, Works With: Briggs & Stratton, HP: 4 [Read more]

Store: NorthernTool.com

Briggs & Stratton Air Filter Intek 5.56.75 HP

$10.99

Briggs & Stratton Air Filter Intek 5.56.75 HP Application: Briggs & Stratton, HP: 5.5 - 6.75 [Read more]

Store: NorthernTool.com

Briggs & Stratton Extended Life Series Intek V-Twin Engine with Electric Start 26 HP, 1in. x 3 5/32in. Shaft, Model# 44Q777-0127-G1

$869.99

The Briggs & Stratton 27 HP Extended Life Series Intek V-Twin Engine is a powerful choice for OEM and replacement use. The engine is designed with easy maintenance points and longer-lasting components to save time and money over the long run. Premium engine offers world class power, performance and reliability, with features like Magnetron electronic ignition, a large dual-barrel carburetor and an advanced debris management system. Displacement (cc): 724, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Application: Commercial mowers, Zero-Turn-Radius Mowers, and lawn tractors, Shaft Output: Vertical, Engine Type: V-Twin OHV, Start Type: Electric, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 300, Charging System Amps: 16, Ignition System: Magnetron Electronic, Cylinders (qty.): 2, Oil Capacity (qt.): 4, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: ... [Read more]

Store: NorthernTool.com

Briggs & Stratton Fuel Filter, Model# 5018H

$4.99

Original equipment fuel filter used for Briggs & Stratton engines and other small engine-powered outdoor equipment. This fuel filter has a 150-micron rating and is primarily used on small engines without a fuel pump. Replaces B&S Service Part #298090S. [Read more]

Store: NorthernTool.com

Briggs & Stratton Horizontal 1450 Series I/C OHV Engine with Electric Start 14.5 Gross Torque, 305cc, 3/4in. x 2 21/32in. Shaft, Model# 205437&#4

$659.99

Briggs & Stratton Horizontal 1450 Series I/C OHV Engine with Electric Start delivers 14.5 ft.-lbs. Gross Torque to get the job done. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for One-Pull starts and smooth operation. U.S.A. Displacement (cc): 305, Shaft Dimensions Diameter x L (in.): 3/4 x 2 21/32, Application: Troy-bilt tillers, log splitters, compressors, pressure washers and blowers, Torque (ft./lbs.): 14.5, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Electric with rewind back-up start, Mounting Base L x W (in.): 7.69 x 3.97, Bolt Circle (in.): 3 5/8, 5, 6 1/2, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 3/8-24, Max. RPM: 3, 600, Charging System Amps: 3, Ignition System: Magnetron Elec... [Read more]

Store: NorthernTool.com

Briggs & Stratton I/C Horizontal Engine 305cc 1350 Series, 13.5 Gross Torque, 1in. x 3 21/32in. Threaded Shaft, Model# 202332-0535-B1

$579.99

Briggs & Stratton 305cc 1350 Series Industrial/Commercial Horizontal Engine produces 13.5 ft.-lbs. Gross Torque to get the job done. Externally threaded PTO for use on pumps. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for One-Pull starts and smooth operation. U.S.A. Displacement (cc): 305, Shaft Dimensions Diameter x L (in.): 1 x 3 21/32, Threaded, Application: Pumps, Torque (ft./lbs.): 13.5, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Mounting Base L x W (in.): 7.69 x 3.97, Bolt Circle (in.): 3 5/8, 5, 6 1/2, PTO Height (in.): 4.17, Max. RPM: 3, 750, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 26-28 oz., Air Cleaner Type: Dual element includes au... [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Edge Vertical OHV Engine 6.5 HP, Shaft Tapered 5/16in., Model# 121612-0545-E1

$369.99

This Briggs & Stratton 6.5 HP Intek Edge vertical OHV engine is an ideal replacement engine for generators. U.S.A. Displacement (cc): 190, Application: Generators, Shaft Output: Vertical, Engine Type: OHV, Start Type: Recoil, Bolt Circle (in.): 8, Shaft Keyway (in.): 5/16-24 tapered, Ignition System: Magnetron electronic, Fuel Tank Capacity (qt.): 1.6, Air Cleaner Type: Dual clean, Muffler Included: Yes, Bore x Stroke (in.): 2.69 x 2.04, Cylinder Bore: Cast iron, Carburetor: One-Start float Briggs & Stratton 6.5 HP Intek Edge vertical OHV engine Shaft tapered 5/16in.-24 keyway 11.5 cu. in. displacement Dual-Clean air cleaner with pleated paper filter with foam pre-cleaner Includes aluminized Lo-Tone muffler for low noise operation Mechanical torque control for additional power [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Engine 205cc, 3/4in. x 2 5/16in. Shaft, Model# 126392-0070-B8

$349.99

This Briggs & Stratton Intek engine is built for power and unmatched reliability to deliver superior performance and durability. Not for sale in California Displacement (cc): 205, Shaft Dimensions Diameter x L (in.): 3/4 x 2 5/16, Torque (ft./lbs.): 8.5, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Mounting Base L x W (in.): 6.38 x 3.13, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 5/1624, Max. RPM: 3800, Ignition System: Magnetron Electronic, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 20 oz., Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Cylinder Bore: Aluminum alloy, Carburetor: Float type Includes auxiliary PTO shaft with 1/2in. dia. [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Snow Horizontal Engine 7.5 HP, 1in. x 2 27/64in. Shaft, Model# 12D412-0009-E1

$429.99

Briggs & Stratton 7.5 HP Intek Snow Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Freeze resistant recoil starter provides smooth easy starts. Ergonomically designed rewind handle and controls for easy use in cold, snowy weather. Computer optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up. U.S.A. Displacement (cc): 205, HP: 7.5, Application: Snow Blowers, Shaft Output: Horizontal, Engine Type: Snow - OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.12, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 1/4, Sh... [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Vertical OHV Engine with Electric Start 13.5 HP, 1in. x 3 5/32in. Shaft, Model# 21B907-0026-G1

$699.99

Briggs & Stratton 13.5 HP Intek OHV Vertical Engine. Anti-Vibration System (AVS) is a patented linear balancing system that eliminates side-to-side motion of traditional counter and rotating balancing engines to provide a smooth ride. (Image is representative of this type of engine; oil pump and filter is not included with this model.) U.S.A. Displacement (cc): 344, HP: 13.5, Application: Riding lawn mowers and lawn tractors, Shaft Output: Vertical, Engine Type: OHV, Start Type: Electric, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 300, Charging System Amps: 3 Amps DC and 14 Volts AC, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Si... [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Vertical OHV Engine with Electric Start 17.5 HP, 1in. x 3 5/32in. Shaft, Model# 31G707-0026-G1

$899.99

Briggs & Stratton 17.5 HP Intek AVS Vertical Engine. Anti-Vibration System (AVS) is a patented linear balancing system that eliminates side-to-side motion of traditional counter and rotating balancing engines to provide a smooth ride. U.S.A. Displacement (cc): 500, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Application: Riding lawn mowers and lawn tractors, Shaft Output: Vertical, Engine Type: OHV, Start Type: Electric, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 300, Charging System Amps: 9, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 3.56 x 3.06, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: Yes, Gove... [Read more]

Store: NorthernTool.com

Briggs & Stratton Intek Vertical OHV Engine with Electric Start 21 HP, 1in. x 3 5/32in. Shaft, Model# 331877-0036-G1

$619.99

Briggs & Stratton 21 HP Intek Vertical OHV Engine with Electric Start delivers top performance to meet the demands of professionals. The OHV engine features a pressure lubrication system with an automotive full-flow style spin-on oil filter that cleans contaminants from the oil. U.S.A. Displacement (cc): 540, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Application: Riding lawn mowers and lawn tractors, Shaft Output: Vertical, Engine Type: OHV, Start Type: Electric, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 300, Charging System Amps: 9, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Full Pressure, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 3.70 x 3.06, Cylinder Bore: Cast iron, Cooling System: Air ... [Read more]

Store: NorthernTool.com

Briggs & Stratton Oil Filter, Model# 5049D

$9.99

Original equipment oil filter used for most Intek and Vanguard OHV engines, and selected L-head twin cylinder Briggs & Stratton pressure lubricated engines. Has a height of 2 14in. Replaces B&S Service Part #492932S. Replaces B&S Retail Packaged Part #5049D. U.S.A. Application: Intek and Vanguard OHV engines, Height (in.): 2 1/4 [Read more]

Store: NorthernTool.com

Briggs & Stratton Powerbuilt Vertical Engine 10.5 HP, 1in. x 3 5/32in. Shaft, Model# 215702-0015-G1

$469.99

Briggs & Stratton 10.5 HP Powerbuilt OHV Vertical Engine. Overhead valve design runs cooler and cleaner, delivering more power, longer engine life and improved fuel economy. Improved breather system lowers oil consumption and reduces emissions. Displacement (cc): 344, HP: 10.5, Application: Riding lawn mowers and lawn tractors, Shaft Output: Vertical, Engine Type: OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 400, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Oil Capacity (qt.): 3, Air Cleaner Type: Automotive-type pleated paper air filter, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (mm): 3.44 x 2.26, Cylinder Bore: Aluminum alloy, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: Yes, Governor System: Mechanical, Auto Compression Release: Ye... [Read more]

Store: NorthernTool.com

Briggs & Stratton Quantum Vertical Engine 5 HP, 7/8in. x 1 13/16in. Shaft, Model# 122K02-0018-E

$249.99

Briggs & Stratton 5 HP Quantum Vertical Engine. Quantum engines are designed with performance and dependability in mind. Known for easy starting and power, Quantum engines also have larger muffler for quiet operation. Prime N Pull easy starting system delivers the right amount of fuel to the carburetor for consistent one-pull starts. U.S.A. Displacement (cc): 190, HP: 5, Application: Walk mowers, Torque (ft./lbs.): 6.75, Shaft Output: Vertical, Engine Type: OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 7/8 x 1 13/16, Mounting Base L x W (in.): 8, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 3/8-24 and 2 woodruff key slots, Max. RPM: 3, 100, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 1.6, Oil Capacity (qt.): 1.25, Air Cleaner Type: Automotive-type pleated paper air filter, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Gear driven, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x ... [Read more]

Store: NorthernTool.com

Briggs & Stratton Single Cylinder L Head Repair Manual, Model# 270962

$15.99

For the experienced do-it-yourselfer this manual contains common specifications and detailed instructions on how to adjust, tune up and repair Briggs & Stratton engines. Contains repair information on single cylinder L head engines manufactured after 1981. U.S.A. [Read more]

Store: NorthernTool.com

Briggs & Stratton V-Twin Vanguard OHV Engine with Electric Start 18 HP, 1in. x 2 29/32in. Shaft, Model# 356447-0079-G1

$1,449.99

Briggs & Stratton 18 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90 overhead valve design runs cooler, cleaner and more efficiently, providing more HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. Displacement (cc): 570, Shaft Dimensions Diameter x L (in.): 1 x 2 29/32, Application: Many commercial applications including compressors, pressure washers, conveyors, etc., Shaft Output: Horizontal, Engine Type: V-Twin OHV, Start Type: Electric, Mounting Base L x W (in.): 7.68 x 4.02, Bolt Circle (in.): 5, 6.5, 7.75, PTO Height (in.): 5.248, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 3/8-24, Max. RPM: 3, 600, Charging System Amps: 16, Ignition System: Magnetron Electronic, Cylinders (qty.): 2, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filte... [Read more]

Store: NorthernTool.com

Briggs & Stratton Vanguard Diesel Engine with Electric Start 23.6 HP, 1in. x 3in. Shaft, Model# 825368

$5,399.99

Super power for your toughest jobs. Compact, lightweight, and POWERFUL. 3 in-line cylinders, liquid cooled. Cast iron block for long life and quiet operation. Pressure feed lubricating system with spin-on oil filter. Electric start for easy start-ups. Exceptionally well balanced for low vibration. Meets CARB and EPA regulations. Truck Ship. 2-year limited warranty. Displacement (cc): 850, HP: 23.6, Application: Many commercial applications including compressors, pressure washers, conveyors, etc., Torque (ft./lbs.): 39.4 at 2, 400 RPM, Engine Type: Diesel, Start Type: Electric, Shaft Dimensions Diameter x L (in.): 1 x 3 (shaft not included), Max. RPM: 23.6 HP at 3, 600 RPM, Charging System Amps: 40, Ignition System: Electronic, Cylinders (qty.): 3, Oil Capacity (qt.): 3.2, Air Cleaner Type: Dual-stage Cyclonic, Muffler Included: Yes, Low Oil Alert: Yes, Lubrication System: Pressure feed, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.68 x 3.07, Cylinder Bore: Cast ... [Read more]

Store: NorthernTool.com

Briggs & Stratton Vanguard Diesel Engine with Electric Start 26.5 HP, 1in. x 3in. Shaft, Model# 582447

$5,599.99

Super power for your toughest jobs. Compact, lightweight, and POWERFUL. 3 in-line cylinders, liquid cooled. Cast iron block for long life and quiet operation. Pressure feed lubricating system with spin-on oil filter. Electric start for easy start-ups. Exceptionally well balanced for low vibration. Meets CARB and EPA regulations. Displacement (cc): 952, HP: 26.5, Application: Many commercial applications including compressors, pressure washers, conveyors, etc., Torque (ft./lbs.): 43.5 at 2, 400 RPM, Engine Type: Diesel Powerunit, Start Type: Electric, Shaft Dimensions Diameter x L (in.): 1 x 3 (shaft not included), Max. RPM: 26.5 HP at 3, 600 RPM, Charging System Amps: 40, Ignition System: Electronic, Cylinders (qty.): 3, Oil Capacity (qt.): 3.2, Air Cleaner Type: Dual-stage Cyclonic, Muffler Included: Yes, Low Oil Alert: Yes, Lubrication System: Pressure feed, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.83 x 3.07, Cylinder Bore: Cast iron, Cooling System: Liqui... [Read more]

Store: NorthernTool.com

Briggs & Stratton Vanguard Horizontal Engine 6 HP, 3/4in. x 2 27/64in. Shaft, Model# 118432-0036-E1

$549.99

Briggs & Stratton 6 HP Vanguard OHV Horizontal Engine. Overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. Dura-Bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control. required. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Displacement (cc): 182, Shaft Dimensions Diameter x L (in.): 3/4 x 2 27/64, Application: Tillers, compressors, log splitters and edgers, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Mounting Base L x W (in.): 7.80 x 4.65, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 5/16-24, Max. RPM: 3, 600, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 3.8, Oil Capacity (qt.): 1.5, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Incl... [Read more]

Store: NorthernTool.com

Briggs & Stratton Vanguard V-Twin Horizontal Engine 23 HP, 1in. x 2 29/32in. Shaft, Model# 386447-0079-G1

$1,649.99

Briggs & Stratton 23 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90 overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. U.S.A. Displacement (cc): 627, Shaft Dimensions Diameter x L (in.): 1 x 2 29/32, Application: Many commericial applications including compressors, pressure washers, conveyors, etc., Shaft Output: Horizontal, Engine Type: V-Twin OHV, Start Type: Electric, Mounting Base L x W (in.): 7.68 x 4.02, Bolt Circle (in.): 5, 6.5, 7.75, PTO Height (in.): 5.248, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 3/8-24, Max. RPM: 3, 600, Charging System Amps: 16, Ignition System: Magnetron Electronic, Cylinders (qty.): 2, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter ... [Read more]

Store: NorthernTool.com

Briggs & Stratton Vertical OHV Engine with Electric Start 17.5 HP, 1in. x 3 5/32in. Shaft, Model# 31C707-0026-G1

$509.99

Briggs & Stratton vertical OHV replacement engine for riding lawn mowers and lawn tractors. U.S.A. Displacement (cc): 500, Shaft Dimensions Diameter x L (in.): 1 x 3 5/32, Application: Riding lawn mowers and lawn tractors, Shaft Output: Vertical, Engine Type: OHV, Start Type: Electric, Mounting Base L x W (in.): 10, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 7/16-20, Max. RPM: 3, 330, Charging System Amps: 9, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Oil Capacity (qt.): 3, Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 3.56 x 3.06, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: No, Governor System: Mechanical, Auto Compression Release: No, Dimensions L x W x H (in.): 19 x 16 x 13, EPA/CARB Approval (California Air Resource Boar... [Read more]

Store: NorthernTool.com

Drainzit Oil Changing Aid Model# HON1012

$15.99

Change oil without the mess! Drainzit is easy to install, simple to use and requires no engine modification. May be used on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, go-karts, lawn mowers and more. 12mm drain port Fits Honda GX240, GX270, GX340, GX390, GC160 and Kohler CS8.5, CS10 and CS12 engines 14in. overall length Quality brass fittings [Read more]

Store: NorthernTool.com

Drainzit Oil Changing Aid Model# STAN1025

$16.99

Change oil without the mess! Drainzit is easy to install, simple to use and requires no engine modification. May be used on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, go-karts, lawn mowers and more. 1/4in. NPT drain port Fits many Briggs & Stratton and Tecumseh engines 14in. overall length Quality brass fittings [Read more]

Store: NorthernTool.com

Electric Replacement Starter Briggs & Stratton Single Cylinder Engine

$129.99

Popular electric replacement starters for Briggs and Stratton and Kohler engines meet or exceed OEM specifications. Engine: Single Cylinder, Engine Type: Electric, Application: Replacement starter Fits: Briggs and Stratton Single Cylinder Aluminum Block Engines Replaces Part#: Briggs and Stratton 497595 [Read more]

Store: NorthernTool.com

Electric Replacement Starter Briggs & Stratton Twin Cylinder Engine

$129.99

Popular electric replacement starters for Briggs and Stratton and Kohler engines meet or exceed OEM specifications. Engine: Twin cylinder, Engine Type: Electric, Application: Replacement starter Fits most Briggs and Stratton Twin Cylinder 14, 16, 18, 20 HP Engines Replaces Part#: Briggs and Stratton 497596 [Read more]

Store: NorthernTool.com

Hatz Diesel Engine 10 HP, Recoil Start, 1in. x 2.84in. Shaft, Model# 1B40U2RS-9928

$2,199.99

Low-maintenance diesel engine is compact, lightweight, durable, fuel-efficient and extremely quiet. Features recoil start, dry-type air cleaner, serviceable muffler and tip-over leak protection. HP: 10, Engine Type: Diesel, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 2.84, Shaft End Tapped (in.): 7/16-20, Air Cleaner Type: Dry, Muffler Included: Yes 10 HP air-cooled single cylinder diesel engine Flange mount bolt circle diameter: SAE-A 92.08mm., SAE-B 146.1mm. Small, light, powerful, and universally applicable Light alloy [Read more]

Store: NorthernTool.com

Honda GX Muffler Kit 24 HP Engine, Left, Model# VHLM4

$149.99

Hi mount left (facing the PTO shaft) discharge muffler, for our #60242 and 60243 engines. Sides: Left, Application: Honda, HP: 24 [Read more]

Store: NorthernTool.com

Honda Horizontal Engine with Cyclone Air Filter 270cc, GX Series, 1in x 2 3/54in. Shaft, Model# GX270UTQXC9

$669.99

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Displacement (cc): 270, Shaft Dimensions Diameter x L (in.): 1 x 2 3/54, Application: Pressure washers, compressors, go-karts, log splitters, chipper/shredders, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Mounting Base L x W (in.): 7.7 x 3.2 to 3.7, Bolt Circle (in.): 5, 6 1/2, Air Cleaner Type: Cyclone, Low Oil Alert: Yes, Cylinder Bore: Cast iron, EPA/CARB Approval (C... [Read more]

Store: NorthernTool.com

Robin Subaru Muffler Kit for Item# 60221

$99.99

Top-mount muffler kit for Item# 60221 Robin 22 HP engine. Right or left side outlet. Sides: Left or Right, Application: Muffler kit, Engine Type: Robin, HP: 22 [Read more]

Store: NorthernTool.com