25PC TOOL SET W/RCHT & BIT

$12.89

Maxam 25pc SAE Tool Set includes: ratcheting Thandle magnetic bit holder 10 bits (including hex Phillips slotted and a 1/4 inch adapter) 4pc precision screwdriver set 8pc sockets and travel storage case with integrated flashlight. Requires 4AA batteries (not included). Case measures 75/8 inch x 5 inch x 31/2 inch. Limited lifetime warranty on tools only. Gift boxed 2 lbs. 1800PT 21. 95 Item MT25 [Read more]

Brand: SCG

3M Automotive Products 2 Inch Roloc 50 Grit Grinding Discs - 25 Pk. (Green)

$42.69

Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing [Read more]

Brand: 3M Automotive Products

3M Automotive Products 3 Inch Roloc 50 Grit Grinding Discs - 25 Pk. (Green)

$48.23

Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing [Read more]

Brand: 3M Automotive Products

3M Automotive Products 3 Inch Roloc 50 Grit Grinding Discs - 25 Pk. (Green)

$43.15

Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing [Read more]

Brand: 3M Automotive Products

3M Automotive Products 6 Inch Stickit Gold P220 Grade Sanding Discs- 75 Disc Roll

$46.32

Durable and longer lasting disc product. Discs have pressure-sensitive adhesive for easy application and removal. [Read more]

Brand: 3M Automotive Products

3M Automotive Products 6 Inch Stickit Gold P80 Grade Sanding Discs- 75 Disc Roll

$45.17

Durable and longer lasting disc product. Discs have pressure-sensitive adhesive for easy application and removal. [Read more]

Brand: 3M Automotive Products

3M Automotive Products 6 Inch Stickit Green Fre-Cut 80D Grade Sanding Discs- 100 Disc Roll

$132.07

100 discs, 80D grade Durable and longer lasting disc product Discs have pressure-sensitive adhesive for easy application and removal [Read more]

Brand: 3M Automotive Products

3M Automotive Products Cut Off Wheels 50 Pack 3 Inch X 1/16 Inch

$94.16

Abrasive Mineral Type, Aluminum Oxide General purpose cut-off wheels with 3/8 inch arbor hole Used for cutting autobody sheet metal, frame rails, exhaust pipes, clamps and rusted bolts For use on utility type cut-off tools [Read more]

Brand: 3M Automotive Products

3M Automotive Products Green Corps Cut-Off Wheel, 3 In X 1/16 In X 3/8 In - 5 Pack

$34.03

General purpose cut-off wheels with 3/8 inch arbor hole. 3M s highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels. Typically last 3 to 8 times longer than competitive aluminum oxide cut-off wheels on the following materials: steel, stainless steel, sheet metal, fiberglass and aircraft alloys. Green Corps brand cut-off wheels resist cracking and chipping and generate a cooler cutting action on most materials. Max Operating Speed: 26, 000 [Read more]

Brand: 3M Automotive Products

3M Automotive Products Green Corps Cut-Off Wheel, 3 In X 1/32 In X 3/8 In - 5 Pack

$36.96

General purpose cut-off wheels with 3/8 inch arbor hole. 3M s highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels. Typically last 3 to 8 times longer than competitive aluminum oxide cut-off wheels on the following materials: steel, stainless steel, sheet metal, fiberglass and aircraft alloys. Green Corps brand cut-off wheels resist cracking and chipping and generate a cooler cutting action on most materials. Max Operating Speed: 26, 000 [Read more]

Brand: 3M Automotive Products

3M Automotive Products Hookit SBS Back-Up Pad For 8 Inch Pads

$61.47

Designed to be used with compounding pads and foam pads in 8 inch and 9 inch diameters 5/8 inch threads for use on most slow-speed polishers [Read more]

Brand: 3M Automotive Products

3M Automotive Products Roloc Bristle Discs - 3 Inch White 10 Pack

$82.43

Super Tough plastic bristle brush, embedded with abrasive, wear as they clean continually exposing fresh abrasive. The ideal tool to replace scrapers, wire wheels and chemical strippers. Roloc - 1/2 turn on, 1/2 turn off Bristles ride over surface without gouging Use green on steel parts and yellow or white for aluminum. [Read more]

Brand: 3M Automotive Products

3M Automotive Products Roloc Clean Clean N Strip 4 Inch Disc

$17.92

Aggressively removes paint and rust from seams, door jambs, drip mouldings, pinch welds and other hard-to-reach areas 3-dimensional abrasive web conforms to work area Safer than wire bristle tools Durable web design lasts longer and will not rust 8000 RPM max. Operating speed Use with 3M Roloc Holder (3M 7500) [Read more]

Brand: 3M Automotive Products

3M Automotive Products Scotch-Brite Disc Back-Up Pad With Shaft - 2 Inch

$10.44

Hook&Loop type [Read more]

Brand: 3M Automotive Products

3M Automotive Products Scotch-Brite Roloc Surface Conditioning Discs - 3 Inch Coarse/Brown 25-Pack

$55.31

Scotch Brite Surface prep discs will quickly remove gasket materials and surface oxidation/rust. Roloc - 1/2 turn on, 1/2 turn off Use with appropriately sized Roloc Disc Back-up Pad Assembly [Read more]

Brand: 3M Automotive Products

Acme Automotive 1/4 Inch NPT Chrome-Plated Blow Gun With High Flow Tip

$37.87

The Typhoon Pro provides the same high flow as the standard Typhoon but in an all-metal design for hardcore users. Chrome plating on an aluminum body resists chemicals and solvents and makes this gun easy to clean. The gun can also be disassembled for easy maintenance and internal cleaning. Standard with chrome-plated high flow tip. Flow is 34 CFM at 125 PSI. Generates 2. 1 lbs. Of Thrust. Maximum flow for easy clean up and blow-off of even the heaviest shavings and chips. Meets or exceeds OSHA regulations. Variable flow trigger for controlled blow-off. Durable, all metal construction. Chrome-plated to resist chemicals and solvents. Can be disassembled for easy maintenance and internal cleaning. Uses the same tips and extensions as the regular Typhoon. Specifications Body Material: Chrome-plated aluminum Trigger Material: Die-Cast Zinc Tip Material: Chrome-Plated Brass Weight: 12oz. Sound Level at 125 PSI (Db): 85 Length: 10. 5 inch Width: 5. 75 inch Height: 2. 125 inch [Read more]

Brand: Acme Automotive

Acme Automotive Air Tool Oil - 4 Oz. Bottle

$9.59

Rust proofs, removes moisture and lubricates Prolongs tool life Specially formulated high grade 10 weight lubricant Maximizes tool performance Will not harm polycarbonate bowls [Read more]

Brand: Acme Automotive

Acme Automotive Ball Swivel Air Hose Plug - 1/4 Inch X 1/4 Inch Male Threads - ARO Interchange, A Style

$13.24

Combines the best features of the ball swivel fittings and connectors, resulting in a secure and ergonomic connection that eliminates the need for a separate swivel fitting Reduces leak points and creates a more lightweight tool-to-hose connection! Swivel ability extends hose life and minimizes user fatigue Connector and nut are nickel-plated hardened steel; threaded fitting is brass [Read more]

Brand: Acme Automotive

Acme Automotive Deluxe Blow Gun Kit With 13 Interchangeable Tips

$45.91

Pistol-Grip Blow Gun - lightweight yet rugged with variable flow control. Plus 13 interchangeable tips: Non-Safety Tip - for applications requiring a concentrated air stream; Standard Safety Tip (OSHA compliant); Safety Booster Tip (OSHA compliant); High Volume Safety Tip (OSHA compliant); Inflator Tip - fits over valves to inflate tires; Rubber Tip - for blowing out molds or use with other delicate surfaces; Assortment of Five Needle Tips - for precise air delivery; 10 inch Safety Extension Tip (OSHA compliant); Comes in molded case. [Read more]

Brand: Acme Automotive

Acme Automotive Deluxe Blow Gun Kit With 13 Interchangeable Tips

$46.31

Pistol-Grip Blow Gun - lightweight yet rugged with variable flow control. Plus 13 interchangeable tips: Non-Safety Tip - for applications requiring a concentrated air stream; Standard Safety Tip (OSHA compliant); Safety Booster Tip (OSHA compliant); High Volume Safety Tip (OSHA compliant); Inflator Tip - fits over valves to inflate tires; Rubber Tip - for blowing out molds or use with other delicate surfaces; Assortment of Five Needle Tips - for precise air delivery; 10 inch Safety Extension Tip (OSHA compliant); Comes in molded case. [Read more]

Brand: Acme Automotive

Acme Automotive FLEXEEL Reinforced Polyurethane Air Hose - 3/8 Inch X 25 Foot

$38.91

FLEXEEL Polyurethane Reinforced Hose offers an excellent alternative to bulkier rubber hoses. Extremely lightweight and tough. FLEXEEL is ideal for either outdoor road service use or indoor paint & body shop use. FLEXEEL retains its flexibility even in cold environments (down to -40 degrees Fahrenheit). The reinforced construction eliminates the possibility of having the various layers separate due to constant expansion and contraction during pulsating operations. Retains Flexibility in subzero temperature UV stabilized for longer outdoor service life. Easy to wrap & store. Resistant to lubricating oils, greases & abrasion. 3/8 inch I. D. 50 Feet long, 1/4 inch threaded ends. [Read more]

Brand: Acme Automotive

Acme Automotive FLEXEEL Reinforced Polyurethane Air Hose - 3/8 Inch X 50 Foot

$59.83

FLEXEEL Polyurethane Reinforced Hose offers an excellent alternative to bulkier rubber hoses. Extremely lightweight and tough. FLEXEEL is ideal for either outdoor road service use or indoor paint & body shop use. FLEXEEL retains its flexibility even in cold environments (down to -40 degrees Fahrenheit). The reinforced construction eliminates the possibility of having the various layers separate due to constant expansion and contraction during pulsating operations. Retains Flexibility in subzero temperature UV stabilized for longer outdoor service life. Easy to wrap & store. Resistant to lubricating oils, greases & abrasion. 3/8 inch I. D. 50 Feet long, 1/4 inch threaded ends. [Read more]

Brand: Acme Automotive

Acme Automotive Inflator Gauge With Heavy Duty 12 Inch Hose

$35.81

Chrome-plated casting, brass internals, heavy duty valve and plated steel chuck. Straight-on tapered chuck inflator design. Comes with a 12 inch heavy duty rubber hose. 1/4 inch NPT female inlet. Easy to read and measures in 2 lb. Increments. Commonly used on coin-operated tire inflators at gas stations. [Read more]

Brand: Acme Automotive

Acme Automotive Inflator Gauge With Heavy Duty 12 Inch Hose

$25.88

Chrome-plated casting, brass internals, heavy duty valve and plated steel chuck. Straight-on tapered chuck inflator design. Comes with a 12 inch heavy duty rubber hose. 1/4 inch NPT female inlet. Easy to read and measures in 2 lb. Increments. Commonly used on coin-operated tire inflators at gas stations. [Read more]

Brand: Acme Automotive

Acme Automotive Multi-Jet 2 Ft Extension For The Typhoon Blow Gun

$24.56

Meets or exceeds OSHA regulations. Ideal for heavy-duty clean-up & blow-off of even the heaviest shavings & chips. Lightweight and ergonomic. Variable trigger for controlled blow-off. Max Flow - 34 CFM 125 PSI; 2. 1 Lbs. Of thrust. Plastic trigger [Read more]

Brand: Acme Automotive

Astro Pneumatic 1/2 Inch Extra Heavy Duty Reversible Air Drill

$86.91

Side handle for greater operator control One hand reverse lever for reversible action Positive action trigger for speed control Variable speed throttle for ease of starting hole Handle exhaust directs air away from work Built-in muffler reduces noise level Planetary gear system for long life Low speed, high torque design. Specifications: Chuck Capacity: 1/2 inch Free Speed: 500rpm Overall Length: 9-1/4 inch (235mm) Net Weight: 4-1/3lbs. (1. 95kg) Motor: 1/2hp Air Inlet Thread NPT: 1/4 inch Air Hose I. D. Size: 3/8 inch (10mm) Avg. Air Consumpt. 7cfm Air Pressure: 90-120psi [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 1/4 Inch 30 Degree Angle Die Grinder

$57.00

Gearless Ergonomic design fits comforatbly in the palm of your hand allowing for extended use with little strain on the hand and wrist Composite handle reduces vibration Lever throttle for feathering control Comes with brass regulator Front exhaust Specifications: Collet size: 1/4 inch Free speed: 25, 000 RPM Overall length 7-3/4 inch (197 mm) Net weight: 1 lb. (. 46 kg) Motor HP: 1/3 Air inlet thread: 1/4 inch NPT Working air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 1/4 Inch 90 Degree Composite Body Die Grinder

$62.33

Composite handle reduces vibration Rib textured handle provides a firm grip Lever throttle for feathering control Compact lightweight Built-in regulator Front exhaust Specifications: Collet Size: 1/4 inch Free Speed: 20, 000 Overall Length: 5-1/4 inch (133mm) Net Weight 7/8 inch (. 42mm) Motor HP: 1/3 Air Inlet Thread NPT: 1/4 inch Average Air Consumption: 3 cfm Working air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 1/4 Inch Medium Die Grinder

$36.61

Composite handle reduces vibration Compact and lightweight Lever throttle for feathering control Rib textured handle provides a firm grip Rear exhaust air flow system directs air away from work surface Specifications: Collet Size in. 1/4 Free Speed RPM: 22, 000 Overall Length in. 6-7/8 Net Weight lb. 1-1/8 Motor HP: 1/3 Air Inlet Thread NPT in. 1/4 Air Hose I. D. Size in. 3/8 Average Air Consumption CFM: 4 [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 1/4 Inch Palm Air Ratchet Wrench

$46.79

Compact and lightweight Ideal tool for confined working areas such as under dashboard work Ergonomically designed blue composite body Overall length 5 1/2 inch (140mm) Specifications: Square Drive 1/4 inch (6mm) Free Speed 240rpm Overall Length 5-1/2 inch (140mm) Net Weight 0. 94lbs. (0. 43kg) Max. Torque 16ft. /lbs. Bolt Capacity 1/4 inch (6mm) Air Inlet Thread 1/4 inch NPT Air Hose I. D. Size 3/8 inch (10mm) Avg. Air Consumption: 4cfm Air Pressure 90psi [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 1/4 Inch Universal Swivel Air Inlet Joint Kit

$24.05

NPT Bi-directional 360 rotation Keep air hose straight and untwisted Increase maneuverability of air tool Decrease operator fatigue For use on drills, impact wrenches, grinders, screwdrivers, sanders, nail guns, staplers, etc. [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 2 Inch Roll Lock Disk Holder

$10.92

Roll lock holder for twist-on grinding/sanding and surface prep pads 1/4 inch shaft [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 2-1/4 Gallon Pressure Tank With Spray Gun & 12 Foot Hose - Black Gun - 1.0mm Nozzle

$243.93

Sturdy construction and compact design makes this 2-1/4 gallon (8517cc) pressure tank the ideal choice for both amateur and professional. Pressure spray gun equipped with pressure gauge and fluid pressure regulator for accurate settings. 12 ft. Twin set of hose permits easy movement and operation of spray gun. Excellent for spraying large areas such as buses, trucks or vans. Nozzle Size: 1. 0mm Operation Pressure: 60psi Net Weight: 23-1/8lbs. (10. 48kg) Dimensions H x D: 10 inch x 9-3/4 inch Required Compressor: 3hp Avg. Air Consumpt. 7cfm Air Inlet Thread NPT: 1/4 inch [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 3 Inch Air Cut-Off Tool

$50.33

Contoured lever throttle with positive self-locking action prevents accidental starting of motor Chrome plated steel spark guard Built-in speed regulator Heavy-duty motor for tough cutting jobs Specifications: Wheel size: 3 inch Free speed: 20, 000 RPM Overall length: 7-1/2 inch (191 mm) Net weight: 2 lb. (1. 1 kg) Air inlet thread NPT: 1/4 inch Average air consumption: 4 CFM Air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 3/8 Inch Palm Ratchet Wrench

$43.72

Compact size, great for working in tight areas. Lever type throttle control. Lightweight and compact. Specifications: Free Speed (rpm): 160 Air Consumption (1/min): 110(4 CFM) Max Torque: 50ft/lbs Square Drive (inch): 3/8 inch Air Inlet (inch): 1/4 inch Std. Bolt Size (inch): 3/8 inch Length (inch): 8-3/8 inch Air Pressure (kg/cm ): 6. 2 (90PSI) [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 3/8 Inch Reversible Air Drill

$53.19

Lightweight, compact size is easy to handle Provides full power in forward and reverse Equipped with a built-in muffler for noise reduction Planetary gear system for long life Specifications: Chuck Capacity: 3/8 inch Free Speed: 1, 800rpm Overall Length: 7-7/8 inch (200mm) Net Weight: 2-1/2lbs. (1. 1kg) Motor: 1/2hp Air Inlet Thread NPT: 1/4 inch Air Hose I. D. Size: 3/8 inch (10mm) Avg. Air Consumpt. 7cfm Air Pressure: 90-120psi [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 3/8 Inch Right-Angle Air Drill Reversible

$100.32

90 degree angle head design Compact design for close clearance operation 2 gear drive system Lightweight for fatigue free handling Specifications: Free speed: 1, 600 RPM Overall length: 8-1/4 inch (210 mm) Net weight: 2 lbs. (0. 91 kg) Motor HP: 1/2 inch Air inlet thread NPT: 1/4 inch Average air consumption: 4 CFM Working air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 3/8 Inch Snub Nose Air Impact Wrench

$60.93

Snub nose design for easy access to tight spots Rubber nose guard protects tool and work surface Compact and lightweight Built-in power regulator Positive action trigger to control speed Specifications: Square Drive in. 3/8 Overall Length in. 5-1/2 Net Weight lb. 2-3/4 Maximum Torque ft/lb. 75 Bolt Capacity in. 3/8 Air Inlet Thread NPT in. 1/4 Average Air Consumption CFM: 4 [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 6 Inch Composite Body Palm Sander - 10, 000 Rpm

$95.67

High powered 5mm (3/16 inch) Stroke Finish Super lightweight (1. 5lbs. ) and compact for minimum operator fatigue Orbital action assures final swirl-free finish Built-in speed regulator Ergonomic design suits for long term operation and greater comfort and control Compact and lightweight motor for long term operation Composite lever housing and rotors Special design reduces sound level Low vibration Uses Astro: 4506 - 6 inch Pad w/ Velcro 4508 - 6 inch Self Adhesive Back Pad Specifications: Pad Size: 6 inch Free Speed: 10, 000rpm Overall Length: 6 inch(15. 24cm) Net Weight: 1. 5lbs. (. 68kg) Spindle Thread Size: 5-16 inch - 24 Air Inlet Thread NPT: 1/4 inch Air Hose I. D. Size: 3/8 inch (10mm) Avg. Air Consumption: 13cfm Air Pressure: 90psi [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 6 Inch DAQ Random Orbital Sander With Pad

$55.80

DAQ - Dual Action, Quiet Performance Used for feather edging, metal preparation & finish work on body filler Built-in silencer and motor insulation provides quiet operation Balanced ball bearing construction for vibration-free performance Built-in regulator for positive speed control Specifications: Disc Size: 6 inch Free Speed: 9, 000rpm Overall Length: 9-1/2 inch (241mm) Net Weight: 4-1/4lbs. (1. 92kg) Spindle Thread Size: 5/16 inch-24 Air Inlet Thread NPT: 1/4 inch Air Hose I. D. Size: 3/8 inch (10mm) Avg. Air Consumpt. 5cfm Air Pressure: 90-120psi [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 8mm Spot Weld Drill Bit

$19.00

For use with spot weld drills or standard drills No pilot hole design leaves underside panel intact while completely removing spot weld on top panel [Read more]

Brand: Astro Pneumatic

Astro Pneumatic 8pc. Double Cut Carbide Rotary Burr Set With 1/4 Inch Shaft

$77.67

All above burrs are 1/4 inch shank, USA standard and comes in blow molded case. Set Includes: SA-5: Cylindrical shape 1/2 inch X 1 inch SA-3: Cylindrical shape 3/8 inch X 3/4 inch SC-3: Cylindrical radius end 3/8 inch X 3/4 inch SC-1: Cylindrical radius end 1/4 inch X 5/8 inch SD-1: Ball shape 1/4 inch SD-3: Ball shape 3/8 inch SF-3: Tree shaped radius end 3/8 inch X 3/4 inch SF-5: Tree shaped radius end 1/2 inch X 1 inch Blow molded storage case [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Air Caulking Gun

$31.67

Permits smooth flow caulking Dispense caulking, adhesives and sealants from standard cartridge Specifications: I. D. Size(Tube) 2 inch Tube Length 8-1/4 inch Air Pressure 40-90psi Net Weight: 2. 8lbs. [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Air Powered Winshield Remover Kit

$105.91

As a sealent cutter, cuts around bonded and encapsulated glass Efficiently cleans and smooths mouldings after glass removal Teasing throttle and regulator provide easy speed control Flexible wand mount can be positioned in 12 different ways in 30 degree increments Rear exhaust directs air away from work 3 Blades included with tool: 57mm Straight blade (WINDK-08E), 35mm Bent blade (WINDK-08G), Thin blade (WINDK08H) [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Auto-Rewind Air Hose Reel With 1/2 Inch X 50 Foot Air Hose

$179.43

Four roller, anti-snag hose guide Adjustable rewind-stop for convenient hose positioning Included Non-Conductive air hose is 1/2 inch x 50 foot Heavy-duty metal reel construction Specifications: Reel capacity: 1/2 inch x 50 foot Hose included: Yes Air inlet thread NPT: 3/8 inch Air outlet thread NPT: 3/8 inch [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Auto-Rewind Air Hose Reel With 3/8 Inch X 50 Foot Air Hose

$159.04

Four roller, anti-snag hose guide Adjustable rewind-stop for convenient hose positioning Included Non-Conductive air hose is 3/8 inch x 50 foot Heavy-duty metal reel construction Specifications: Reel capacity: 3/8 inch x 50 foot Hose included: Yes Air inlet thread NPT: 1/4 inch Air outlet thread NPT: 1/4 inch [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Complete Surface Prep Kit With 90 Degree Angle Air Die Grinder

$77.00

Ideal for cleaning and polishing engine heads and detail sanding Patent 5, 332, 098 Weight 3 lbs. Kit includes: 1/4 inch angle head die grinder (T20AH), 5 pc. 2 inch surface prep pads with holder, 5 pc. 3 inch surface prep pads with holder, spanner wrench, 1/8 inch collet, 10 pc. Stone assortment Air Grinder Specifications: Collet size: 1/4 inch Free speed: 25, 000 RPM Overall lenght: 4-7/8 inch Net Weight: 1 lb. Motor HP: 1/3 Air inlet thread: 1/4 inch NPT Average air consumption: 3 CFM [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Deluxe Air Blow Gun With 13 Inch Long Angled Nozzle & 1/2 Inch Removable Rubber Tip

$15.67

New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications Comfortable lever control and insulated handle Ergonomic grip High impact plastic body with built-in hanger slot Angled Nozzle easily gets into tight places Brass air inlet Air Inlet Thread NPT: 1/4 inch Air Pressure: 90-120psi Temperature Range: -40 to 80 C [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Deluxe Air Blow Gun With 20 Inch Long Angled Nozzle & 1/2 Inch Removable Rubber Tip

$16.67

New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications Comfortable lever control and insulated handle Ergonomic grip High impact plastic body with built-in hanger slot Angled Nozzle easily gets into tight places Brass air inlet Air Inlet Thread NPT: 1/4 inch Air Pressure: 90-120psi Temperature Range: -40 to 80 C [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Deluxe Air Blow Gun With 4 Inch Long Angled Nozzle & 1/2 Inch Removable Rubber Tip

$14.00

New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications Comfortable lever control and insulated handle Ergonomic grip High impact plastic body with built-in hanger slot Angled Nozzle easily gets into tight places Brass air inlet Air Inlet Thread NPT: 1/4 inch Air Pressure: 90-120psi Temperature Range: -40 to 80 C [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Deluxe Air Spot Weld Drill Kit With Deep Clamp

$263.67

Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath Drill bit removes the entire spot weld, eliminating the need for grinding Kit includes: Air Spot Weld Drill 5. 5 inch Deep Clamp 4 - Drill Bits (2-8mm, 2-6. 5mm) End Line Oiler (3000) 3 Way Swivel (3SB10) Plastic Blow Molded Case Specifications: Drill Bit Size Chuck Cap. 5/16 inch Free Speed: 2, 000rpm Overall Length: 8-3/4 inch (222mm) Air Inlet Thread NPT: 1/4 inch Avg. Air Consumption: 4cfm [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Deluxe Air Windshield Remover

$235.67

Tool is counter balanced for smooth operation which results in less fatigue to the body. Heavier and thicker blades last much longer Built-in air regulator. 12, 000 strokes per minute allows you to cut through urethane much faster. Comes with 4 inch, 6 inch and 8 inch blades No lubricants needed No clean up time necessary Safety lever 1 year warranty Replacement blades available: 17704 - 4 inch Serrated Blade 17705 - 6 inch Serrated Blade 17706 - 8 inch Serrated Blade [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Dual Action Mini Air Sanding & Polishing Kit

$79.92

Kit Includes: Pistol grip dual action sander/polisher tool - 2800 - 13, 000RPM 3 inch backup pad 1-1/2 inch velcro holder 1-1/2 inch sanding pad 3 inch polishing foam pad (2) 3 inch 400 grit sanding discs (2) 3 inch 600 grit sanding discs (2) 3 inch 1000 grit sanding discs (10) 1-1/2 inch 2000 grit sanding discs Spanner wrench [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Mini Air Reciprocating Saw

$76.05

Ideal for body shop repair, muffler and exhaust work Adjustable blade guide increases blade life Cuts all types of aluminum, plastic, fiberglass and sheet metal Versatile; cuts intricate shapes and tight radius curves on flat and curved surfaces Specifications: Cutting capacity (stock thickness): 1. 5 mm Overall length: 8-1/2 inch (216 mm) Net weight: 2lbs. (. 9 kg) Piston stroke: 1/4 inch Strokes per minute: 10, 000 Air inlet thread: 1/4 inch Average air consumption: 7 CFM Working air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Screw Extractor/Drill And Guide Set - 25 Pc.

$61.03

Extracts screws and bolts Can be used on thread sizes 5mm to 16mm Remove broken fastener without breaking or jamming Permits highest torque applied to broken fastener without expansion - allowing a higher percentage of broken fastener to be turned out. Comes in blow molded case. [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Straight Punch/Flange Air Tool

$96.77

5/16 inch punch Performs hole punching and panel crimping Features a rotating head for convenient use Precise control - every pull of the lever delivers a single punch or a single flange crimp Forms an offset crimped edge on sheet metals for no-bump lap welds Lightweight, yet ruggedly built Cuts metal fabrication time in half [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Surface Prep Kit With Composite Handle 90 Degree Angle Die Grinder

$80.35

Ideal for cleaning and polishing engine heads and detail sanding Patent 5, 332, 098 Weight 3 lbs. Kit Includes: 1 - 1/4 inch 90 degree Angle die grinder with composite handle(AP1240), 5 - 2 inch Surface prep pads with 1 holder, 5 - 3 inch Surface prep pads with 1 holder, 1 - spanner wrench, 1 - 1/8 inch collet, 10 pc. Stone assortment Specifications: Collet Size: 1/4 inch Free Speed: 20, 000 Overall Length: 5-1/4 inch (133mm) Net Weight 7/8 inch (. 42mm) Motor HP: 1/3 Air Inlet Thread NPT: 1/4 inch Average Air Consumption: 3 cfm Working air pressure: 90-120 PSI [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Titanium Step Drill Bit Set (1/8 Inch - 1/2 Inch , 3/16 Inch - 1/2 Inch, 1/4 Inch - 3/4 Inch)

$46.60

Self-starting multiple hole sizes Contains one each of: 13 Hole Sizes from 1/8 inch to 1/2 inch and 1/32 inch increments 6 Hole Sizes from 3/16 inch to 1/2 inch and 1/16 inch increments 9 Hole Sizes from 1/4 inch to 3/4 inch and 1/16 inch increments Net Weight: 1/4lbs. (. 11kg) [Read more]

Brand: Astro Pneumatic

Astro Pneumatic Wheel Hub & Stud Resurfacing Kit

$30.60

Use this kit with a 1000-1500 RPM drill to quickly and easily remove rust from wheel lug studs, hub face, and disc rotor hat. Kit includes 10 cleaning pads and pad holder [Read more]

Brand: Astro Pneumatic

B&D ALKALINE SCREWDRIVER USES 4AA INCLUDED

$22.62

Spindle lock for manual use if desired and for greater control when starting and finishing screws Forward/Reverse slide switch for easy screwdriving and screw removal Rubber grips provide comfort and control Narrow nose piece for extended reach in [Read more]

Brand: Black & Decker Inc

BelAire Air Compressors Single-Stage Air Compressor - 6HP, 60 Gallon Vertical

$847.80

Start/Stop pressure switch control Cast iron compressor pump Thermally protected motor Fully enclosed belt guard 60 gallon vertical tank with drain and discharge valve All Bel Aire air compressors are tested at full pressure by the factory before shipment Made in the USA Specifications: ACFM 100 PSI: 12. 35; 14. 55 40 PSI Max PSI: 130 Motor: 208-230V/1Ph. - 15 AMP CFM Displacement: 16. 80 [Read more]

Brand: BelAire Air Compressors

BLACK & DECKER 9072CTN 2.4-VOLT CORDLESS SCREWDRIVER

$20.36

SPINDLE LOCK FOR MANUAL USE IF DESIRED & FOR GREATER CONTROL WHEN STARTING & FINISHING SCREWS; FORWARD/REVERSE SIDE SWITCH FOR EASY SCREWDRIVING & SCREW REMOVAL; TEXTURED GRIP FOR COMFORT & CONTROL SUBCATEGORY2: POWER TOOLS. Warranty: TWO YEARS. [Read more]

Brand: Black and Decker

BLACK & DECKER JS600B JIGSAW KIT WITH QUICKCLAMP & SIGHTLINE CHANNEL

$57.46

5. 0-AMP MOTOR; 3-POSITION ORBITAL ACTION; EXCLUSIVE QUICK CLAMP BLADE CHANGE PROVIDES EASY TOOL-FREE BLADE CHANGING; VARIABLE SPEED DIAL ALLOWS USER TO SELECT SPEED; METAL GEAR CASE; SIGHTLINE CHANNEL PROVIDES VISIBILITY TO LINE OF CUT DUST BLOWER CLEARS DEBRIS FROM LINE OF CUT; ROLLER SUPPORT GUIDE; ELECTRONIC VARIABLE SPEED PROVIDES ADDED CONTROL & CUTTING VERSATILITY IN WOOD, METAL & PLASTIC; CONTOURED 2-FINGER TRIGGER; TOOL-FREE BEVELING SHOE; SUBCATEGORY2: POWER TOOLS. Warranty: TWO YEARS. [Read more]

Brand: Black and Decker

BLACK & DECKER PS130 BATTERY (12V)

$39.97

NICAD; HIGH OUTPUT NICKEL CADMIUM BATTERY CELLS WITH NO MEMORY TECHNOLOGY PROVIDE UP TO 500 RECHARGES; 2-YEAR WARRANTY SUBCATEGORY2: POWER TOOLS. Warranty: TWO YEARS. [Read more]

Brand: Black and Decker

Blazer The HotShot - Self-Igniting Butane Micro-Torch

$33.05

Lightweight, portable with air adjustment and gas flow knobs for superior flame control. Ideal for DIY, Electronic, Melt/soften adhesives and light repair work. 30-35 min burn time, 10 gram gas capacity. [Read more]

Brand: Blazer

Blumol Bi-Metal Reciprocating Saw Blades - 6 Inchx24T, 50 Pack

$74.17

Bi-metal construction Thicker and wider than conventional bi-metal blades 8 cobalt Recommended for metal cutting [Read more]

Brand: Blumol

Chicago Pneumatic 1 Inch Air Impact Wrench With 6 Inch Extended Anvil- Ergonomic

$661.05

Chicago Pneumatic is pleased to introduce a new addition to the 1 inch impact wrench family. Long known for durability and performance, we have now added a tool which gives the durability you expect from Chicago Pneumatic with less weight. With directed exhaust to keep dust and materials away from the operator, 1, 550 ft-lbs of torque, over 5, 000 rpm of free speed, and ergonomically designed handles and trigger, this tool has all you need for heavy duty truck and equipment repair. Features included will make it the tool of choice for the most demanding truck tire service applications. Great power, durability, ergonomics, and speed. The leader in 1 inch impacts adds to the line: 6 inch Extended anvil for tire work. 1, 550 ft-lbs of torque: Power to make this the most powerful 1 inch in its weight class 5, 000 rpm: Speed to get the job done fast and efficiently Directed exhaust: Directs exhaust air away from operator and work area Overmold Side Handle Grip: Comfort and control in any... [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1 Inch Extra Heavy Duty Impact Wrench

$588.93

Most popular 1 inch truck tire tool available today Durable rocking dog clutch ideal for tire work Teasing throttle for easy bolt starting Convenient reverse valve for easy directional changes Applications: high volume tire work on trucks, buses and heavy equipment Ultimate Torque: 1400 ft. -lbs. Specifications: Square Drive in. 1 Weight lb. 29-3/4 Length in. 22-1/4 Average Air Consumption CFM: 12 Air Inlet NPTF in. 1/2 Working Torque Range ft. -lb: 150-900 Ultimate Torque 90PSI Fwd/Rev ft. -lb. 1400 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1 Inch Impact Wrench With 6 Inch Anvil

$569.01

1, 450 ft. -lbs. Of ultimate torque Three position power regulator with directional control Angled down exhaust directs air away from operator High efficiency 6 vane motor Specifications: Free speed: 5000 rpm Length: 20. 2 inches Weight: 25. 4 lbs. [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/2 Inch Air Impact Wrench

$125.17

Differential regulator allows the operator to match the required power to the job Improved oil bath DYNA-PACT clutch delivers higher performance and extended durability Handle exhaust directs air away from the workpiece and operator Teasing throttle design for precise control Applications: overall automotive service, body shop, farm, light truck work, etc. Ultimate Torque: 425 ft. -lbs. Specifications: Square Drive in. 1/2 Weight lb. 5-1/8 Length in. 7-1/2 Avg. Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Working Torque Range ft. -lb. 25-310 Ult. Torque 90 PSI ft. -lb. 425 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/2 Inch Air Impact Wrench With 2 Inch Extended Anvil

$144.93

The CP7733-2 version offers all the design advantages of the standard CP7733 with an important addition - a 2 inch extended anvil that complements wheel and tire installations. Energy efficient air motor for increased power with less air. Streamline housing for better styling and reduced weight. Easy to read power management control dial. Ergonomic grip for less hand stress. More durable 6 vane rotor for increased durability. Patented Spring Hammer Clutch increases life by 35. Ergonomic trigger for more comfort during operation. Product Specifications: Square Drive (in) 1/2 Working Torque Range Ft. -lbs. (Nm) 25-400(34-542) Max Torque 90 PSI Rev. Ft. -lbs. (Nm) 550(746) Free Speed(rpm) 7, 000 Weight lbs. (kg) 5. 9(2. 7) Length in(mm) 9. 1(231) Avg Air Consumption CFM(l/min) 4. 75(106) Air Inlet Thread Size NPTF in. 1/4 Sound dBA Pressure 96 Vibration m/s(square) 4. 0 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/2 Inch Drive Heavy Duty Air Ratchet

$104.89

Advanced head design provides dramatically longer life Ergonomic square-handle design for a positive, comfortable grip Efficient 1/2 hp motor provides up to 50 ft. -lb. Of torque Teasing throttle for precise speed control Applications: exhaust systems, small engines, water pumps, fuel pumps, radiators, etc. Ultimate Torque: 50 ft. -lb. Specifications: Weight lb. 2-5/8 Length in. 10 Average Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Speed rpm: 150 Working Torque Range ft. -lb. (Nm): 10-50 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/2 Inch Drive Impact Gun - Ultra Compact

$271.89

The new CP Turbo 7750 offers several advantages over other 1/2 inch impact wrenches on the market. Powered by the newest innovation in air drives, Chicago Pneumatic s patented CP Turbo motor system High torque to weight ratio - weighs only 5 lbs. But delivers 800 ft/lbs of torque in reverse (the old standard was 625 ft/lbs in reverse) The compact body design gives mechanics access to tight work areas, without compromising power. CP Turbo 7750 1/2 inch tool competes favorably with 3/4 inch tools on the market and yet is priced well below those bigger, heavier tools. Oil bath clutch for continuous lubrication and extended life Composite body and aluminum clutch housing and back cap for durability and light weight Single control dial at rear of housing for improved regulator and direction control Handle exhaust directs air away from work area Soft overmolded handle and ergonomic trigger for comfort Specifications: Square drive: 1/2 inch Blows per minute: 1, 800 Tool weight: 5 lbs. Ulti... [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/2 Inch Heavy Duty Air Impact Wrench

$135.89

The Chicago Pneumatic CP7733 1/2 inch impact wrench is the most efficient air tool in its class. Designated the CP7733, the new compact and lightweight air tool delivers an ultimate torque of 550 ft. -lbs. With 5 speeds in forward and one in reverse. Featuring CP s patented SpringHammer clutch, it s designed for smooth operation and extended service. It s the low maintenance, cost effective air tool for many applications including general automotive, body shops, light trucks and farm service. Product Specificiations: Square Drive (in) 1/2 Working Torque Range Ft. -lbs. (Nm) 25-400(34-542) Max Torque 90 PSI Rev. Ft. -lbs. (Nm) 550(746) Free Speed(rpm) 7, 000 Weight lbs. (kg) 5. 6(2. 5) Length in(mm) 7. 1(180) Avg Air Consumption CFM(l/min) 4. 75(106) Air Inlet Thread Size NPTF in. 1/4 Sound dBA Pressure 96 Vibration m/s (square) 4. 0 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/4 Foot Reversible Mini Air Drill With Keyless Chuck

$137.76

The latest CP Mini drill not only has the same great power and reversible feature as the 7300R, but now you have the maximum ease of use with a keyless chuck. Planetary gearing and brass bushings for great durability, this will be the last small drill you will ever need. With directional exhaust and rubber handle grip, this tool gives you comfort in any situation. The new forward reverse switch is small and out of the way to allow for comfortable handling no matter how you use the tool. If slow start drilling is what you re after, this tool has all the trigger control you need. Great features, durability, style, and now it reverses. We just made the best small drill even better: 1/4 Horsepower Motor: Power to get even heavy duty jobs done quickly and easily. Keyless chuck for fast bit and accessory changes. Speed: At 2, 700 rpm this tool has the speed to get the job done fast. Compact and Lightweight: Get into even the smallest areas without a problem. Easy access Fwd/Rev Switch: Co... [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 1/4 Inch Reversible Air Drill - Compact

$141.47

Chicago Pneumatic is pleased to introduce the reversible CP7300R 1/4 inch Drill. Not only does it have the same great power as the CP7300, but now you can reverse it. With planetary gearing and brass bushings for great durability, this will be the last small drill you will ever need. With directional exhaust and rubber handle grip, this tool gives you comfort in any situation. The new forward reverse switch is small and out of the way to allow for comfortable handling no matter how you use the tool. If slow start drilling is what you re after, this tool has all the trigger control you need. Great features, durability, style, and now it reverses. We just made the best small drill even better: 1/4 Horsepower Motor: Power to get even heavy duty jobs done quickly and easily. Speed: At 2, 700 rpm this tool has the speed to get the job done fast. Compact and Lightweight: Get into even the smallest areas without a problem. Easy access Fwd/Rev Switch: Controls that are easy to access, but n... [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 2 Inch Mini Air Angle Grinder

$379.21

Differential regulator allows the operator to match the required power to the job Improved oil bath DYNA-PACT clutch delivers higher performance and extended durability Handle exhaust directs air away from the workpiece and operator Integral 360 degree air inlet swivel keeps air hose from being twisted and kinked Teasing throttle design for precise control Applications: assembly and maintenance of buses, trucks, RV s, farm machinery and construction equipment Ultimate Torque: 1000 ft. -lbs. Specifications: Square Drive in. 3/4 Weight lb. 10-1/2 Length in. 9-5/8 Avg. Air Consumption CFM: 8 Air Inlet NPTF in. 3/8 Working Torque Range ft. -lb: 150-700 Ult. Torque 90 PSI Fwd/Rev ft. -lb: 1000 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3 Inch Air Cut-Off Tool

$68.39

Compact, lightweight design for easy maneuverability Lock off throttle to prevent accidental start up 90 degree angle head allows flexibility in tight quarters Complete with 1/4 inch and 6mm collet Applications: high speed blending, smoothing, porting and deburring in confined areas Free Speed: 21000 rpm Specifications: Collet/Spindle Size in. 1/4 Weight lb. 1 Length in. 4-7/8 Average Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Free Speed rpm: 21000 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Dr. Air Ratchet Ultra Duty With Adjustable Noise Control

$178.03

The CP 7830 Air Ratchets feature a break-through adjustable noise level control, without loss of power. In fact, they offer the highest torque available on the market. These lightweight, well balanced tools also feature the patented TriSpring ratchet head. Adjustable noise level - as low as 79 dba! Highest torque available on the market. 2. 7 lbs. 90 ft. -lbs maximum torque in reverse Speed 190 rpm [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Inch Drill With Keyless Chuck

$118.41

Power at 10, 000 strokes per minute allows you to quickly cut through material with ease Lock off throttle to prevent accidental startups Adjustable guard/guide allows operator to set depth of cut Rear exhaust directs air away from workpiece Ergonomic design for comfort and easy handling Comes with (1 each) 24T, 28T, 32T mini air saw blades [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Inch Drive Heavy Duty Air Ratchet

$103.11

Advanced head design provides dramatically longer life Ergonomic square-handle design for a positive, comfortable grip Efficient 1/2 hp motor provides up to 50 ft. -lb. Of torque Teasing throttle for precise speed control Applications: exhaust systems, small engines, water pumps, fuel pumps, radiators, etc. Ultimate Torque: 50 ft. -lb. Specifications: Weight lb. 2-5/8 Length in. 10 Average Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Speed rpm: 150 Working Torque Range ft. -lb. (Nm): 10-50 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Inch High Speed Quiet Ratchet

$148.16

The new CP7828 Air Ratchet features breakthrough noise reduction along with superior power and speed when compared to other ratchets in their class. Feature the patented anti-slip ratchet head for extended life. Quiet Operation. Compact, yet packed with power and speed. Features patented anti-slip head design which virtually eliminates slippage. Easy Touch Variable Speed Trigger for speed control on all types of work. 60 Ft. -lbs. Max torque 240 RPM 10. 75 inch overall length [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Inch Impact Wrench

$172.68

Improved oil bath DYNA-PACT clutch delivers higher performance and extended durability Differential regulator allows the operator to match the required power to the job Handle exhaust directs air away from the workpiece and operator Integral 360 degree air inlet swivel keeps air hose from being twisted and kinked Teasing throttle design for precise control Applications: transmissions, exhaust systems, body shops, general repair in the 3/8 inch range Ultimate Torue: 200 ft. -lbs. Specifications: Square Drive (In. ): 3/8 Weight (lb. ): 3. 1 Length (In. ): 6 Average Air Consumption CFM: 3 Air Inlet NPTF (In. ): 1/4 Working Torque Range ft. -lb. 40-170 Ult. Torque 90 PSI Fwd/Rev ft. -lb. 200 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 3/8 Inch Reversible Angle Air Drill

$72.79

Compact head design allows greater flexibility in tight areas Easy to grip reverse lever for simple directional changes Hardened gears allow greater durability over other economically priced ratchets Applications: installing or removing spark plugs, radiators, water pumps, and exhaust systems Ultimate torque: 50 ft. -lb. Specifications: Square Drive in. 3/8 Weight lb. 2-1/4 Length in. 10-1/4 Average Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Speed rpm: 160 Working Torque Range ft. -lb. (Nm): 10-50 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 6 Inch General Duty Dual Action Air Sander

$65.91

Lock off throttle to prevent accidental start up Rear exhaust directs air away from the workpiece Built in regulator matches speed to the job Complete with 1/4 inch and 6mm collet Applications: tire scuffing, cleaning tire moldings, general high speed polishing and grinding Free Speed: 22000 rpm Specifications: Collet Size in. 1/4 Weight lb. 1-1/4 Length in. 5-3/4 Average Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Free Speed rpm: 22000 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 6 Inch Heavy Duty Dual Action Air Sander

$68.13

Rotary and orbital motion for rapid removal as well as fine finishing Speed regulator to match speed to the job Lock off throttle to prevent accidental start ups Insulated grip provides comfort to operator Applications: blending and smoothing filler, feather edging and pre-paint preparation Free speed: 10000 rpm Specifications: Paper size in. 6 Weight lb. 4-1/4 Average Air Consumption CFM: 5 Air Inlet NPTF in. 1/4 Free Speed rpm: 10000 Motor hp: 1/2 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic 6 Inch Random Orbital Palm Sander - Fine Finish

$206.65

Palm Sander A new benchmark in the field of high quality finish sanding, the new Chicago Pneumatic CP7220 series palm sanders combine power, comfort, low noise and low vibration for greater productivity. Random obital sander 3/32 inch (2. 4 mm) orbit for high quality fine finish. The perfect choice for Finish Film and Mirco abrasive pads. Easy to handle, compact and lightweight, providing best power to weight ratio in its class 0. 3 hp oil free motor delivers the power you need to get the job done while keeping the work area free of contaminants Triple balance design provides balance with low vibration for superior control and high performance finishing Adjustable speed regulator with safety shut off for maximum control Unique silencer for low sound level on non-vacuum and central vacuum models Composite construction with rubber palm grip for light weight and comfort Regulator with safety shut-off to match the speed to the application Available with nonvacuum, self-vacuum and centra... [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic Air Die Grinder

$69.21

Lock off throttle to prevent accidental start up Rear exhaust directs air away from workpiece Built-in regulator matches speed to job Applications: cutting through sheet metal, fiberglass, bolts, muffler clamps and hangers; also grinds down burrs and rough edges Free Speed: 22000 rpm Specifications: Wheel Size in. 2-7/8 Weight lb. 1-3/4 Length in. 7-1/4 Average Air Consumption CFM: 5 Air Inlet NPTF in. 1/4 Free Speed rpm: 22000 [Read more]

Brand: Chicago Pneumatic

Chicago Pneumatic Engraving Pen

$75.53

Lightweight for easy operation Fine point stylus for precise engraving Cushion finger grip for comfort Air consumption only 1 CFM 14000 blows per minute Specifications: Weight (Lb): 1-1/4lb Length (In. ): 5-1/4 inch Average Air Consumption CFM: 1 Air Inlet NPTF in. 1/4 Blows Per Minute: 14, 000 [Read more]

Brand: Chicago Pneumatic

Makita Power Tools 3/8 Inch 9.6V Cordless Drill Kit - Keyless Chuck, 2 Batteries

$163.96

Compact tool body and lightweight design provide optimum balance and comfort. True variable speed (0 - 350 RPM or 0 - 1, 200 RPM) for controlled drilling. 16 torque settings plus drill mode for optimum torque control. Electric brake for fast stopping of the chuck. Conveniently located forward/reverse switch for one-handed operation. 2-speed gear selection for matching RPM to the applications. Keyless chuck for fast and easy bit changes. High power-to-weight ratio for efficient drilling. Ergonomically developed rubberized pistol grip for complete comfort and control. Standard Equipment: 2 9. 6V Ni-Cd Battery Universal Charger 2 Battery Cover Tool Case Flashlight Specifications: Steel Capacity: 3/8 inch Wood Capacity: 13/16 inch No Load Speed: Low 0-350 RPM / High 0-1, 200 RPM Max. Torque: 200 in. Lbs. Battery: 9. 6VDC (1. 3Ah) Length: 7 9/16 inch Net Weight: 3. 1 lbs. [Read more]

Brand: Makita Power Tools

Makita Power Tools 18V 1/2 Inch Cordless Driver-Drill Kit

$295.68

Two-piece D-31 motor delivers power, efficiency and serviceability in a more compact size. Dual ball bearings, precision balancing and a refined high-grade field magnet guarantees maximum performance. All Metal Gear Transmission (0-400 / 0-1, 300 RPM) - features a rugged 3-stage, 13-planetary gear system providing smooth, efficient power for the most demanding applications and extended durability. Exclusive Shift Lock Drive enables one-touch, quick shifting from drill to driver mode for increased operator efficiency. The Shift Lock Drive System locks out the clutch for superior drilling. 2. 6 Ah Ni-MH Batteries for greater capacity and longer run time - no memory effect and environmentally friendly, Ni-MH Batteries provide unmatched performance. Locking/racheting chuck for secure tightening of bits and unmatched grip strength. Large spindle bearing ensures positive, on-center drilling performance. Variable speed trigger for precise operator control. Ergonomically designed rubberized... [Read more]

Brand: Makita Power Tools

Makita Power Tools 12V 3/8 Inch Cordless Driver-Drill With 2 Batteries Kit

$218.77

MFORCE - New Two-Piece D-31 Motor. New two-piece D-31 motor delivers power, efficiency and serviceability in a more compact size. Dual ball bearings, precision balancing and a refined high-grade field magnet guarantees maximum performance. All Metal Gear Transmission (0-400 / 0-1, 300 RPM) - features a rugged 3-stage, 13-planetary gear system providing smooth, efficient power for the most demanding applications and extended durability. Exclusive Shift Lock Drive enables one-touch, quick shifting from drill to driver mode for increased operator efficiency. The Shift Lock Drive System locks out the clutch for superior drilling. 2. 6 Ah Ni-MH Batteries for greater capacity and longer run time - no memory effect and environmentally friendly, Ni-MH Batteries provide unmatched performance. Locking/racheting chuck for secure tightening of bits and unmatched grip strength Large spindle bearing ensures positive, on-center drilling performance. Variable speed trigger for precise operator cont... [Read more]

Brand: Makita Power Tools

Makita Power Tools 1/2 Inch Drill Variable Speed, Reversible

$181.92

Powerful 6. 5 AMP motor for heavy duty continuous production work Industrial metal gear housing for durability and long tool life Varialble speed for controlled drilling Heavy duty 1/2 inch drill chuck Compact and lightweight (4. 8 lbs. ) Large conveniently located recessed lock-on button Convenient belt clip attaches to belt or holster Side handle can be attached to either side of tool for better control Double insulated Includes: Drill chuck (763145-2), Chuck key (763420-6) Side handle (122593-8) Specifications: Capacities: Steel 1/2 inch (13mm), 1-3/8 inch (36mm), Wood 1-3/8 inch (36mm) No load speed: 0-550 RPM AMPS (115V): 6. 5 Overall length: 11-1/4 inch (285mm) Net weight: 4. 8 lbs. (2. 0 kg) Shipping weight: 5. 7 lbs. (2. 6 kg) [Read more]

Brand: Makita Power Tools

CLOVER IR045 IR LED NIGHT LIGHT (60-FT RANGE; 68 LEDS)

$69.96

SUPER INFRARED LED; EMITS LIGHT INVISIBLE TO THE NAKED EYE, NOT THE CAMERA SENSOR; INCLUDES REGULATED POWER ADAPTER; 2-YEAR WARRANTY; MADE IN KOREA; 60-FT RANGE; 68 LEDS SUBCATEGORY2: OBSERVATION SYSTEM ACCESSORIES. Warranty: 2 YEARS. [Read more]

Brand: Clover

HeliCoil Micro Drill-Out Power Bolt/Screw Extractor- 4 Piece Kit

$55.45

Drill-Out is a drill bit and extractor in one. The drill bit is made from high quality heat treated steel - allows you to drill into even Grade8 and stainless steel bolts. The extractor is made from hard, flexible die steel which allows it to bite into any bolt or stud without slippng or stripping. Uses the power of your drill to extract the bolt Only requires shallow drilling depth so there is less chance of going off-center and less drilling time Specially designed drill tip will not walk or wander Carrying case included. Includes (4) Micro Drill-Outs: 5, 6 or M3; 8 or M4; 10, 12 or M5; 1/4 inch or M6 [Read more]

Brand: Helicoil

HeliCoil Drill-Out Power Bolt Extractor - 4 Piece Kit

$62.61

Drill-Out is a drill bit and extractor in one. The drill bit is made from high quality heat treated steel - allows you to drill into even Grade8 and stainless steel bolts. The extractor is made from hard, flexible die steel which allows it to bite into any bolt or stud without slippng or stripping. Uses the power of your drill to extract the bolt Only requires shallow drilling depth so there is less chance of going off-center and less drilling time Specially designed drill tip will not walk or wander Carrying case included. Includes four sizes: 1/4 inch-6mm, 5/16 inch-8mm, 3/8 inch-10mm and 1/2 inch-12mm [Read more]

Brand: Helicoil

Startech.com Professional LAN Cable Tester

$211.66

MODEL- LANTESTPRO VENDOR- STARTECH. COM LTD FEATURES- Professional LAN Cable Tester with 4 Remote Loopback Plugs The StarTech. Com Advanced RJ45 LAN Cable tester allows a single person to test several long cables faster and more efficiently than ever before. The tester uses remote loop-back plugs that each have their own unique ID number that the tester can identify. If several cables need to be tested, the user simply puts a loop-back plug on the end of each cable run and goes to the other end to test and identify each one. The tester provides a basic continuity test with a pin-map that will identify wiring errors, allowing them to be quickly corrected. It also identifies several common pinnings and displays the applications for each. The LANTESTPRO requires a separate 9V battery that is not included to operate. Easy to read LCD display shows continuity, opens, shorts, and pin mismatches. A pin mapping of the current cable is displayed while the unit performs the test. Identifies (... [Read more]

Brand: StarTech.com

Performance Tool Wilmar 21 Pc Titanium Coated Drill Bit Set

$27.15

Assorted bit sizes: 1/16 inch to 3/8 inch. Great for drilling plastic, wood, metal. Handy storage case. [Read more]

Brand: Performance Tool Wilmar

ADJUSTABLE QUICK-CUTTER HOLE SAW

$26.22

CUTS ROUND HOLES FROM 2 1/2 inch 7 inch IN DRYWALL & CEILING TILE WITH NO MESS WHEN USING THE CLEAR, FLEXIBLE DUST SHIELD; FITS A 3/8 inch & 1/2 inch DRILL CHUCK & CAN BE USED WITH CORDLESS DRILLS; SELF-SHARPENING CARBIDE-COATED CUTTING BLADES FOR LONG LIFE; DRILL NOT INCLUDED SUBCATEGORY2: HAND TOOLS & ACCESSORIES. Warranty: THIRTY DAYS. [Read more]

Brand: Speare Tools

Irwin Industrial Titanium Unibit Step Drill, 1/8 Inch-1/2 Inch

$38.13

Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates Single-flute cutting edge for greater control through steps 3 flatted shank prevents slipping in drill chuck New SpeedPoint tip penetrates faster than previous Unibits and prevents walking 1/8 inch-1/2 inch Hole Sizes: 13 Steps Number of Holes: 1/8 inch [Read more]

Brand: Irwin Industrial