|
|
|
3-Point Post Hole Digger, Model# FM5500
$419.99
Heavy-duty commercial gearbox with 3:1 gear ratio develops 729 ft.-lbs. of torque at 180 RPM. Shielded drive shaft with commercial-grade cross journals and quick-disconnect lock ring design for tractor connection. 3-point Category I linkage; Category II requires bushings. Boom and U-frame assemblies of 2 7/8in. diameter structural pipe. 6in., 9in. and 12in. augers sold separately. Auger Type: PTO, 3-Point, Gear Ratio: 3:1, Torque (ft./lbs.): 729, Auger Bit Length (in.): 42, Auger Diameter Capability (in.): 6, 9, 12, Tube Size (in.): 2 7/8 [Read more]
Store: NorthernTool.com
|
3-Point Quick Change Hitch Category 1
$179.99 $159.99
Fits over the end of a lift arm to change it from a standard ball hitch to a hook system. Allows attachment of heavy implements to tractor with no lifting necessary. Top link stays flexible for mowers, bushogs and other implements. U.S.A. Hitch Type: 3-Point, Category Type: 1 [Read more]
Store: NorthernTool.com
|
A & I 5-Position Black Seat Poly, Model# W223BL
$89.99 $74.99
Black seat with adjustable 5-angle base, slide track and mounting brackets. Color: Black, Material: Molded Poly, Adjustable: Yes, Dimensions L x W x H (in.): 19 1/2 W x 19 1/2 H Backrest and seat bottom made of durable molded poly composite with padded inlays for comfort Sturdy metal frame with full suspension 19 1/2in.W x 19 1/2in.H [Read more]
Store: NorthernTool.com
|
A & I Replacement Steering Wheel Fits Ford/New Holland Tractors with 36 Spline Hub, Model# D6NN3600B
$36.99
A & I Products replacement steering wheels will fit the tractor, industrial/construction or combine models for Ford/New Holland models. Wheel is 17.5in. in diameter 36 spline hub Fits Ford/New Holland models 2000, 2600, 2610, 2910, 3000, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 5000, 5110, 5600, 5610, 6410, 6600 and 6610 [Read more]
Store: NorthernTool.com
|
|
A & I Wireless Cabcam, Model# WL56M2C
$569.99
Install this wireless camera system in your tractor to increase visibility in the field or on the road. The high-resolution monitor receiver supports up to 4 different cameras on 2.4 GHz wireless. Monitor displays video from the rugged, weatherproof and off road-capable color cameras Cameras feature infrared illuminators that provide up to 32 feet of night visibility, image mirroring, and audio capabilities Cameras and monitor require 12V power source [Read more]
Store: NorthernTool.com
|
Adjustable Gate Wheel 10in.
$42.99 $39.99
Keeps gates from sagging or dragging! All steel construction with a 10in. rubber wheel for rolling over rough terrain. Adjusts up to 24in. and locks into place. Fits steel and wood gates. U.S.A. [Read more]
Store: NorthernTool.com
|
AmSafe Seat Belt 2-Pt. Retractable 57in., Model# 800447XX
$29.99
AmSafe seat belts are certified to meet FMVSS 302 and SAE J386 safety standards. Includes all hardware and installation instructions. U.S.A. [Read more]
Store: NorthernTool.com
|
AmSafe Seat Belt 3-Pt. Retractable, Model# 800556XX
$39.99
AmSafe seat belts are certified to meet FMVSS 302 and SAE J386 safety standards. Includes all hardware and installation instructions. U.S.A. 3-pt. retractable seat belt End release buckle [Read more]
Store: NorthernTool.com
|
|
Ardisam Auger Bit Replacement Blade 10in. Dia., Model# EB10
$21.99
Auger Diameter Capability (in.): 10 Fits Bit: #191142 [Read more]
Store: NorthernTool.com
|
Ardisam 2-Person Commercial-Duty Auger Powerhead 5 HP, Model# 9800H
$799.99
Professional-duty auger with exceptional performance at a fraction of the price of competitors. Anti-vibration grips and fingertip throttle control give maximum control for strenuous jobs. U.S.A. Auger Type: 2 Person, Engine Displacement (cc): 160, Engine Type: Honda GCV160 OHV 4-cycle Commercial-duty gearbox and reinforced handlebars Built to provide superlative performance through years of use Auger bits sold separately [Read more]
Store: NorthernTool.com
|
Ardisam Earth Auger Bit 10in., Model# EA10F
$159.99
Bits fit powerheads for Item#s 191145, 191158, 191162 and 191163. Hardened blade. Features exclusive Shock Absorber Spring to protect you and gear train from impact of hitting rocks and other obstructions. U.S.A. Auger Bit Diameter (in.): 10, Auger Bit Length (in.): 32 [Read more]
Store: NorthernTool.com
|
Ardisam Earth Auger Powerhead 43cc, Model# E43
$249.99 $229.99
One-person high-performance auger powerhead has a 43cc 2-cycle gas engine to give you the power to drill for fence posts, road signs, decks, tree planting and more! Fits all Earthquake earth augers (auger sold separately). U.S.A. Auger Type: 1 Person, Engine Displacement (cc): 43, Engine Type: 2 Cycle, Auger Speed (RPM): 300 max., Gear Ratio: 30:1 See-through gas tank Quick-start primer button Antivibration foam-grip handlebars Muffler guard Solid steel, heat-treated alloy gears [Read more]
Store: NorthernTool.com
|
|
Ardisam Extension Shaft 18in., Model# EXT18
$39.99
Heavy-duty steel extension shaft has 7/8in. F and M ends. Right-hand turn. Fits powerheads for Item#s 19112, 191145 and 191155. U.S.A. Image is representational only; one 18in. shaft is included. Shaft Length (in.): 18 [Read more]
Store: NorthernTool.com
|
Backhoe
$6,699.99
Turns your tractor into a heavy duty excavating machine. A versatile machine that works well for estate owners, farmers, landscaping and golf course maintenance. Digs a maximum 7ft. deep with heavy duty 13in. three-tooth bucket. Large operator platform provides ample room to work for greater comfort and visibility. Levers require less force, minimizing fatigue and giving precise control. PTO pump kit enables unit to work independently of tractor hydraulics. Fits our Item# 188002, 25 HP tractor. Truck Ship. U.S.A. HP: 25 needed, Bucket Size (in.): 13, Digging Depth (ft.): 7, Hitch Type: 3 pt Category 1, Max. RPM: 540, Works With: NorTrac tractors, compact crawler Fits 3-pt. Category 1 hitch 540 RPM 13in. bucket PTO pump kit and reservoir Max digging depth: 7ft. Rotates 180 Rated for use on a 25 HP NorTrac tractors, compact crawler and other brands Truck ship U.S.A. [Read more]
Store: NorthernTool.com
|
Belltec Hydraulic Planetary Auger Drive 6-15 GPM, Model# NC150
$999.99
The Belltec Hydraulic Planetary Auger Drive uses a planetary gear box and fits all skid-steers. U.S.A. Auger Type: Hydraulic, Torque (ft./lbs.): 1, 419 at 3, 000 PSI Compact yet rugged hydraulic auger driver utilizes a planetary gearbox 6-15 GPM motor Includes hydraulic motor adapters (10MB x 8FP) Standard-duty dirt auger bits sold separately [Read more]
Store: NorthernTool.com
|
Braber Equipment General-Purpose PTO Shaft Assembly 27in. Compressed Length, Model# 69.777.001
$69.99
Complete driveline is economical and easy to install, so you dont have to spend time trying to repair damaged or worn shafts. Can be cut to desired length to meet your driveline needs. Meets all ASAE standards. Series 1 32in. collapsed length 46in. max extended length 540 spline quick-disconnect yokes on both ends 16 HP rating Optimal use for fertilizer spreaders [Read more]
Store: NorthernTool.com
|
|
Brave Grapple for 3-Pt. Tractor Hitch, Model# SB-O3
$2,999.99
Use with tractors in 20-60 HP range. Fits category 1, 2, and 3 tractor hitches. Lifts up to 2000 lbs. Opens to 55in. (inside) and handles logs up to 3-ft. dia. Grapple locks at 90 for side loading. U.S.A. Hitch Type: 3-Point, Category Type: 1, 2, 3, Required HP: 20 - 60, Capacity (lbs.): 2, 000 Pivots up to 135 in either direction Pivot points have permanently-lubed bearings Hydraulic lines pass through pivot points to avoid stress on hoses Ships assembled, ready for use [Read more]
Store: NorthernTool.com
|
Brave Grapple for Skid Steer Loader, Model# SL-O3
$3,299.99
Use with loaders in 30-60 HP range. Lifts up to 2000 lbs. Opens to 55in. (inside) and handles logs up to 3-ft. dia. Grapple locks at 90 for side loading. Universal mounting plate to fit all skid steer loaders. Pivots up to 135 in either direction. U.S.A. Pivot points have permanently-lubed bearings Hydraulic lines pass through pivot points to avoid stress on hoses Ships assembled, ready for use [Read more]
Store: NorthernTool.com
|
Brinly-Hardy Cultivator, Model# CC-55BH
$149.99
This Brinly-Hardy cultivator is a versatile, adjustable width tool that can be used throughout the growing season to rein in weed growth. U.S.A. Features seven 12in. rigid shanks and depth control skids Cultivator adjusts from 18in.40in.W and includes J-bolt for adding weight Requires sleeve hitch (not included) [Read more]
Store: NorthernTool.com
|
Brinly-Hardy Moldboard Plow, Model# PP-510BH
$319.99
Use this popular tool to quickly plow your garden. The rust-resistant plow digs a furrow while the moldboard gently turns under old vegetation to make way for new planting. No-tool adjustable 8in.12in. width furrow 1/4in. solid steel plowshare Requires sleeve hitch from tractor manufacturer (not included) [Read more]
Store: NorthernTool.com
|
|
Brinly-Hardy Rear Blade Attachment 42in.W, Model# BB-562BH
$199.99
This Brinly-Hardy rear blade attachment allows you to move or level dirt, gravel, sand, snow and mulch with minimal effort. 42in. working width with wear bar feature allowing it to rotate if it becomes dull. U.S.A. Move or level dirt, gravel, sand, snow and mulch with minimal effort 42in. working width with wear bar feature allowing it to rotate if it becomes dull Fits most riding and lawn/garden tractors Requires a sleeve hitch (not included) [Read more]
Store: NorthernTool.com
|
Carry-On 3-Pt. Hitch Hauler, Model# 803
$349.99
Heavy-duty steel hauler is designed with 3-pt. tractor connection for added versatility. Hitch hauler has a 2500-lb. carrying capacity and features a swing-down tailgate. Easy full-body dump. 6ft.W x 4ft.D. Truck ship. U.S.A. Hitch Type: 3 pt, Category Type: 1, Capacity (lbs.): 2, 500, Box Size W x D (in.): 6 ft W x 4 Ft D [Read more]
Store: NorthernTool.com
|
Classic Accessories Lawn Mower Seat Cover Fits Backrests up to 15in.H
$27.99
Cover protects new seats and renews old seats. Handy pockets in seat back for tools and gear. Cover is coated for maximum water resistance and repellency. Elastic shock cord in bottom hem for a quick, custom-like seat. Fits seats with backrests up to 15in.H. [Read more]
Store: NorthernTool.com
|
Clevis 1 1/8in. Dia, Heat Treated Pin
$19.99
Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. Clevis Type: Straight, Clevis Pin Type: Screw, Usable Length (in.): 3 3/4, Pin Diameter (in.): 1 1/8, Clevis Body Diameter (in.): 1, Working Load (lbs.): 17, 000 [Read more]
Store: NorthernTool.com
|
|
Cozy Cab Gray Acrylic-Coated Nonfolding Poly Sunshade 2x3 Rectangular Tube
$149.99
High-quality polyester sunshade is easy to install on rollbars with 29in.34in. outside horizontal width below the top bend and maximum ROPS tilt of 10 forward and 10 rearward. Minimum of 3in. of straight tube above joint on folding ROPS. U.S.A. Fits 2in. x 3in. rectangular tube [Read more]
Store: NorthernTool.com
|
Cozy Cab Gray Plastic Folding Sunshade
$429.99
High-quality wide gray universal sunshade is easy to install and fits either 2 x 2 square or 3 x 2 rectangular ROPS tubes with 30 3/4in.403/4in. outside horizontal width below the top bend, and maximum ROPS tilt of 15 forward and 18 rearward. U.S.A. [Read more]
Store: NorthernTool.com
|
Double L Horse Stall System 10ft. x 93in. Standard Stall Front
$479.99
Unique in design and flexibility, this stall system is manufactured from heavy-duty 16-gauge Galvalume Plus, a newly developed zinc/aluminum alloy that has a very strong resistance to corrosion. Galvalume Plus has at least three times the life expectancy of galvanized steel. These kits are perfect for the Do-It-Yourselfer. Nonweld construction adapts to any building, and horse-safe hardware shields the horse from sharp edges. Comes complete with prefabricated metal components. Customer must purchase lumber separately. Truck ship. Dimensions: L (ft.) x W (in.): 10 x 93, Material: 16-gauge Galvalume, zinc/aluminum alloy, Doors (qty.): 1 Standard stall front includes: Square track hardware kit Top latch U-channels Lumber clips Grill section Stay roller Post bumper and post edge Nylon grommets Wall brace Wall cap and screws Required wood: ten 10ft. 2 x 6s and one 10ft. 2 x 10 Truck ship [Read more]
Store: NorthernTool.com
|
Double L Horse Stall System 14ft. x 93in. Grilled Partition
$379.99
Unique in design and flexibility, this stall system is manufactured from heavy-duty 16-gauge Galvalume Plus, a newly developed zinc/aluminum alloy that has a very strong resistance to corrosion. Galvalume Plus has at least three times the life expectancy of galvanized steel. These kits are perfect for the Do-It-Yourselfer. Nonweld construction adapts to any building, and horse-safe hardware shields the horse from sharp edges. Comes complete with prefabricated metal components. Customer must purchase lumber separately. Truck ship. Dimensions: L (ft.) x W (in.): 14 x 93, Material: 16-gauge Galvalume, zinc/aluminum alloy Grilled partition includes: Grill section Lumber clips Wall cap Wall brace Nylon grommets U-channels and screws Required wood: ten 14ft. 2 x 6s and one 14ft. 2 x 10 Truck ship [Read more]
Store: NorthernTool.com
|
|
Double L Horse Stall System 14ft. x 93in. Stall Front with Folddown Door
$649.99
Unique in design and flexibility, this stall system is manufactured from heavy-duty 16-gauge Galvalume Plus, a newly developed zinc/aluminum alloy that has a very strong resistance to corrosion. Galvalume Plus has at least three times the life expectancy of galvanized steel. These kits are perfect for the Do-It-Yourselfer. Nonweld construction adapts to any building, and horse-safe hardware shields the horse from sharp edges. Comes complete with prefabricated metal components. Customer must purchase lumber separately. Truck ship. Dimensions: L (ft.) x W (in.): 14 x 93, Material: 16-gauge Galvalume, zinc/aluminum alloy, Doors (qty.): 1 Stall front with folddown door includes: Square track hardware kit Top latch U-channels Lumber clips Grill section Stay roller Post bumper and post edge Nylon grommets Wall brace Wall cap and screws Required wood: ten 14ft. 2 x 6s and one 14ft. 2 x 10 Truck ship [Read more]
Store: NorthernTool.com
|
Drive-Thru Electric Gate 13ft. to 19ft.
$169.99
Pens in cattle, hogs, sheep and horses like an electric fence. Protects the finish of farm vehicles since the metal never touches the vehicle. The gate is energized with any common electric, battery or solar fencer, or electric fence. Fiberglass polyethylene arms support the hanging electrical yellow-coated streamers that release a harmless shock when touched. Simple to install and easy to use insulators are already on the gate, and 4 nails install each side. Adjusts from 13 feet to 19 feet [Read more]
Store: NorthernTool.com
|
Dyna-Grip Gate Wheel For 2in. Dia. Posts, Model# GW0200
$16.99
Gate wheel features super-duty Dyna-Grip clamp that easily attaches to tube gate posts. Heavy-duty construction keeps gate from sagging and reduces stress on posts and hinges. 7in. wheel attaches to clamp and makes opening a gate feel like its riding on air. 1-year limited warranty. U.S.A. For use with posts up to 2in. diameter 7in. wheel 1-year limited warranty U.S.A. Model GW01200 [Read more]
Store: NorthernTool.com
|
EMP Tractor Draw Bar Stabilizer for Category 0 Tractors, Model# 7350-0
$69.99 $59.99
Heavy-gauge steel stabilizer bolts to any 3-pt. drawbar with 2in. hole centers to keep drawbar from rotating. Accepts 2in. square trailer hitch-style receiver. Drawbar not included. U.S.A. Hitch Type: 3-Point, Category Type: 0, Capacity (lbs.): 200 (Trailer Tongue) [Read more]
Store: NorthernTool.com
|
|
Extractor 3-pt. Hitch Kit Model #3PHK
$149.99
The Extractor 3-pt. Hitch Kit enables the user to mount Extractor to Category 1 and 2 tractors. 3-pt. Hitch Kit [Read more]
Store: NorthernTool.com
|
Extractor for Skid-steers Bobcat Mini Size, Model# EXM2000BBM
$3,499.99
The Extractor removes embedded objects quickly and easily without disturbing the surroundings. Removes large shrubs, small trees, stubborn fence posts and more with minimum disturbance. U.S.A. The Extractor uses hydraulic leverage to lift the load vertically while the machine remains still Includes 7-ft. log chain with grab hook Welded cylinder [Read more]
Store: NorthernTool.com
|
EZ Gate Wheel
$39.99
Multiuse wheel for farm, ranch, lake lot, hunting land or home security gates. 6in. wide polyethylene wheel eliminates ruts in driveway. Strong enough to hold up a 300-lb. gate and stops gate from sagging in wet weather. Adjustable to accommodate high or low gates. Powder-coat finish eliminates rust. Includes heavy-duty bolt with locking nut and 2 U-bolts with nuts. U.S.A. [Read more]
Store: NorthernTool.com
|
Fabric Suspension Seat
$459.99
Fabric suspension seat swivels for easy entry, exit and operator positioning. Fabric seat Steel pan with trimmed edge Adjustable armrests Suspension with weight adjustment 3-position height adjustment Slides Mounting patterns 10 1/4in. x 10 1/2in., 10 1/4in. x 11in., 10 1/4in. x 11 1/2in. and 10 1/4in. x 12 3/4in. W=21in., L=25in., H=22in. [Read more]
Store: NorthernTool.com
|
|
Farm Star Box Scraper 42in. Width
$749.99
Great for moving, grading, and spreading topsoil, gravel or driveway rock. Easily pulled by most ATVs and 10-22 HP garden tractors. Clevis-type hitch connects to most hitches. Adjustable operating height, pull rope lever to dump loads or raise to make turns. Chassis can be equipped with optional landscape rake. Truck Ship. U.S.A. Working Width (in.): 42, Hitch Type: Clevis, Blade Type: Box Scraper [Read more]
Store: NorthernTool.com
|
Farm Star Disc Harrow 5ft. Width
$699.99
Attach to your tractor or ATV. Disc flips over for easy transport. Disc gangs work at 20 angle for superior cutting. Rugged 4in. x 12in. pneumatic tires. 5 ft. operating width. Requires 16hp or 250cc. Truck Ship. U.S.A. Working Width (in.): 60, Required HP: 16, Blades (qty.): 8, Blade Diameter (in.): 16 Notched blades for superior soil penetration [Read more]
Store: NorthernTool.com
|
Farm Star Equipment Clamp-On Bucket Bale Spear, Model# BBSF-1565
$279.99
Clamp-on forged bucket bale spear for handling round bales weighing up to 1800 lbs. Mounts to most loader buckets with a chain and turnbuckle system. Tapered forged spear has a useable length of 44in. U.S.A. [Read more]
Store: NorthernTool.com
|
Farm Star Equipment Replacement Forged Bale Spear for Item# 50817
$119.99
Replacement bale spear with sleeve and nut. Ideal for repairing spear-type hay equipment. Tapered forged spear is rated at 2200 lbs. with a useable length of 44in. Sleeve measures 4.42in.L x 2in. O.D. U.S.A. [Read more]
Store: NorthernTool.com
|
|
Farm Star Equipment Rotary Tiller 3-Point, Category 0, 42in. Length
$1,649.99
Tillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in.-6in. maximum. Hitch Type: 3-Point, Category Type: 1 Pin / 0 Spacing, Working Width (in.): 42, Working Depth (in.): 5 - 6, Max. HP: 25, Required HP: 15 - 20, Offset (in.): 11 1/2, Blades (qty.): 20, Blade Type: Curved [Read more]
Store: NorthernTool.com
|
Farm Star Equipment Skid Steer (Grapple Rake) 62in. Width
$2,699.99
Grapple rake features unique tine design with replaceable weld on tine points which allow operator to go under logs and brush to completely pick up debris while leaving dirt. Fits all skid steers with universal quick-tach system. Durable design with good visibility is quick and easy to install; some assembly required. Truck ship. U.S.A. [Read more]
Store: NorthernTool.com
|
Farm Star Landscape Rake 48in. Width
$669.99
Ideal for grading, leveling, removing stones or trash, breaking up sod clumps and more. Design allows close work around fences, walls and other objects. 5/16in. x 1in. heat-treated tines. Turnbuckle adjustment for operating depth and rope pull lever to raise unit. Truck Ship. U.S.A. Working Width (in.): 48, Required HP: 10 - 22, Tine Size L x Dia. (in.): 1 x 5/16 Easily pulled by ATVs or 10-22 HP lawn tractors 5 angle positions, pneumatic tires [Read more]
Store: NorthernTool.com
|
Farm-Tuff Fence Tightener Handle, Model# 130-050A
$6.99
The Farm-Tuff fence tightener handle is designed for use with the 10-pk. of Farm-Tuff fence tighteners, Item# 143783. [Read more]
Store: NorthernTool.com
|
|
Farm-Tuff Fence Tighteners with Springs 10-Pk., Model# 140-020
$39.99
Farm-Tuff fence tighteners with springs provide a simple and inexpensive way to tighten fence wire. Provides a simple and inexpensive way to tighten wire Zinc cast wheel and locking clip and galvanized flat bar parts Comes with spring-loaded flapper for safety Can be used with optional tightener handle (Item# 143784, sold separately) Pack of 10 [Read more]
Store: NorthernTool.com
|
Farm-Tuff Manure Spreader 1200-Lb., 25-Bushel Capacity, Model# MS-1800
$999.99
Designed to be pulled by ATVs or compact tractors. This ground-driven, belt drive spreader requires no PTO. Constructed of heavy-duty structural steel. Treated lumber for sides and floor. Requires assembly. Spreader Type: Ground driven, Load Capacity (lbs.): 1, 200, Walk or Pull: Pull, Spread-able Material: Manure Bed is 72in.L x 28in.W x 16in.H Steel MIG welded frame 16in. O.D. high-flotation slow speed tires MIG welded construction Black painted finish Pin-type hitch Draw bar support stand 1in. treated lumber sides and floor [Read more]
Store: NorthernTool.com
|
Farm-Tuff Spinning Jenny Wire Unrolling Tool, Model# 130-010
$129.99
The Farm-Tuff Spinning Jenny wire unrolling tool is an easy-load wheel that prevents wire from tangling while unwinding. Easy-load wheel prevents wire from tangling while unwinding Simply drive pivot pin into ground, place wheel on pin and set wire onto wheel Adjustable arms for unwinding different diameter coils Powder-coat finish [Read more]
Store: NorthernTool.com
|
Farm-Tuff Tandem Axle Utility Dump Trailer 2000-Lb. Capacity, Model# DT-2000TM
$699.99
Heavy-duty trailer is designed for towing behind ATVs and compact tractors. Tandem wheels pivot and deliver a smooth ride. Load Capacity (lbs.): 2, 000, Frame Material: MIG - welded steel construction, Wheel Type: Tandem Sides lift off easily for use as flatbed [Read more]
Store: NorthernTool.com
|
|
Farm-Tuff Utility Dump/Trailer Wagon 2000-Lb. Capacity, Model# DT-2000
$749.99
This heavy-duty wagon trailer is ideal for use around the farm, ranch or home. Built with heavy-duty MIG-welded steel construction. Rolls on tandem slow speed tires designed to handle rough terrain. Designed for 24in. stroke hydraulic cylinder (sold separately). Load Capacity (lbs.): 2, 000, Frame Material: MIG-welded steel construction, Wheel Type: Tandem slow speed tires Sides lift off for use as flatbed 38in.W x 84in.L [Read more]
Store: NorthernTool.com
|
Fence Wire Splices 100-Pc. Set
$24.99
Splices crimp ends of fence wire together. Contain no alloy and will not expand or contract with temperature changes. Will not corrode. Splices Repair: 12 1/2 to 15 1/2 gauge high-tensile smooth, electric and woven Wire [Read more]
Store: NorthernTool.com
|
Fi-Shock Solar Powered, Battery Operated Fence Controller, Model# SS-440
$149.99
Controls up to 5 miles of electric fence! Recharges its 4 Volt battery with a high efficiency, built-in solar panel. Controller delivers more shocking power than ordinary fencers. Low impedance provides 1/3 less battery drain. U.S.A. Input: 4 Volts, .02 Amps, 8 Watts Intermittent DC Output: 7.5 KV (n2 KV), 3 Amps (n1 Amp) Measures 9 3/4in. x 6 1/2in. x 6 1/2in U.S.A. Model SS-440 [Read more]
Store: NorthernTool.com
|
Fi-Shock Super-Shock Energizer, Model# SS-1000
$79.99
AC-powered electric fence energizer. Strong enough to shock through weeds and grass. Fused panel protection (uses two 1 Amp fuses). Energizes up to 20 miles of fence under ideal conditions. Joule rating: 1 UL listed. U.S.A. [Read more]
Store: NorthernTool.com
|
|
Flexpoint 3-Point Hitch Adapter Category 2-3
$299.99
Fits larger 50 HP tractors and also has the capability to tow gooseneck trailers. For use with category 2 and 3 tractors. Ball Mount receiver is not included. U.S.A. Hitch Type: 3-Point, Category Type: 2, 3 Expands to fit tractors with arms that are wider than 26 in. Rugged construction supports 6, 000 lbs. tongue weight Has capability to haul a gooseneck trailer via a 2 5/16 in. ball fixed to the top link insert Expands upward and outward to accomedate tractor arms [Read more]
Store: NorthernTool.com
|
FREE SHIPPING Front-End Loader 48in. Bucket for 20 HP Tractor Item# 188023
$4,299.99
Built mighty to perform tough! Custom loader placement maximizes tractor/loader performance. Loader has easy-on, easy-off mounting. Solid steel front supports provide added frame support and improved visibility. Joystick valve kit gives ultimate operator control for on-the-go bucket leveling. U.S.A. Control Mechanism: Joystick, Max. Lift Height: 6ft. 6 1/2in., Clearance With Bucket Dumped: 5ft. 4in., Reach At Max. Height (in.): 32 1/2, Max. Dump Angle (deg.): 45, Bucket Roll Back (deg.): 22, Digging Depth (in.): 3 1/2, Overall Height In Carry Position: 4ft. 9in., Lift Capacity To Full Height (lbs.): 930 (will vary depending upon tractor system), Breakaway Capacity (lbs.): 1, 815 (will vary depending upon tractor system), Lift And Bucket Cylinders: Double Acting, Bucket Control: Hydraulic Twin Cylinders, Standard Bucket (ft.): 4, Bucket Cylinder Bore Size - Twin (in.): 1 3/4, Bucket Cylinder Stroke Size - Twin (in.): 17 1/4, Lift Cylinder Bore Size (in.): 1 1/2, Lift Cylinder Stroke ... [Read more]
Store: NorthernTool.com
|
Goldenrod Hired Hand Fence Staples 1 1/2in.
$26.99
Heavy-duty 8-gauge staples are barbed for superior holding power. 352 staples per box; 16 strips with 22 staples per strip. U.S.A. 1 1/2in. For use with Hired Hand staple driver, Item# 143954, sold separately [Read more]
Store: NorthernTool.com
|
GoldenRod Hired Hand Fence Stretcher with 3rd Hook, Model# 415
$49.99
Save time, effort and frustration with the GoldenRod Hire Hand fence tool. This high-tensile, barbed and smooth wire stretcher-splicer is designed with 2 stationary hooks at the ends of the bar and 1 traveling hook. The patented 3rd hook allows for unlimited amount of stretching. U.S.A. 3rd hook allows unlimited amount of slack in the wire while maintaining tension Holds wire securely as traveling hook is moved, freeing the area where the splice is to be made Quick tightening of high-tensile, barbed or smooth wire [Read more]
Store: NorthernTool.com
|
|
Goldenrod Hired Hand Staple Driver
$49.99
The Hired Hand staple driver is like having an extra pair of hands helping you repair barbed wire fences. Just grip the handle and use the guide to position the wire. Staples are fed automatically, and a hammer blow to the punch drives them to the correct depth. Safe to use no smashed fingers, no loose staples. Comfortable hand grip with safety guard. Converts easily for right- or left-handed use. Easyload staple magazine. Yellow chromate plate finish. U.S.A. [Read more]
Store: NorthernTool.com
|
Grower Equipment Tiller Rake 4ft. Length
$2,899.99
Durable tines and reversible scarifying shovels quickly turn hard, compacted ground into a perfect seedbed. Can be changed from a scarifier to a grader, spreader or finishing rake simply by adjusting the top link. Heavy-duty double springs. Great for landscape construction, fire lanes, nursery weed control, soil preparation for sod, and grooming horse arenas, baseball infields and beaches. Truck ship. U.S.A. Factory shipped. Hitch Type: 3-Point, Working Width (in.): 48 [Read more]
Store: NorthernTool.com
|
Harrow Rake 12ft. Width
$899.99
Effectively levels dirt racing tracks and playing fields. Harrow teeth are 7/16in. diameter x 3 1/2in. long and are made of high carbon steel. No maintenance needed. With extra-heavy duty tubular steel draw bar, it lasts for years. Pulls behind tractor, jeep, pickup, ATV or 4-wheeler. Black. Truck Ship. Harrow rake size is 12ft. W x 8ft. L. Working Width (in.): 144, Overall Length (in.): 96, Tine Size L x Dia. (in.): 3 1/2 x 7/16 With steel teeth forward and down, it cultivates, prepares seed beds and rakes up dead foliage Pull it in the other direction and it penetrates less Turn it over so teeth are up and its a drag mat! [Read more]
Store: NorthernTool.com
|
Hawkline Universal Weld-On Mount Model# UnivWeldMount
$399.99
This box blade fits category 1 mounts. It has 4in. welded cutting edges and 3 scarifier shanks. U.S.A. [Read more]
Store: NorthernTool.com
|
|
Hitch Pin 1/2in. Dia, 3 5/8in. Length
$4.69
Heat treated grade 8 forged alloy steel pins. Plated clip pin included. Pin Length (in.): 3 5/8, Pin Diameter (in.): 1/2 [Read more]
Store: NorthernTool.com
|
Howse 3-Point Disc Harrow 6ft. Width
$959.99
Welded frame is constructed of 2 1/2in. x 2 1/2in. angle iron with cast bearings, 1in. square axles and 16in. notched blades. Truck ship. U.S.A. Hitch Type: 3-Point, Working Width (in.): 72, Required HP: 15 - 35, Blades (qty.): 20, Blade Diameter (in.): 16 [Read more]
Store: NorthernTool.com
|
Howse 3-Point Rotary Tiller 54in. Width
$1,669.99
Machine can be offset to either side or centered. A-frame extended for smooth operation. 2 disc torque limiter protects tractor and implement. Removable tine shaft. Heavy duty all gear drive, adjustable skid shoes, suggested use with 25-50 HP. 540 RPM at PTO shaft, 75 HP gear box. 28 13 1/4 in. L by 5/16 in. x 2 1/2 in. W blades, rotor speed of 210 RPM. Digs 7 in. to 10 in. deep. Works with category 1 tractors. Truck Ship. U.S.A. Hitch Type: 3-Point, Working Width (in.): 54, Working Depth (in.): 7 - 10, Required HP: 25 - 50, Blades (qty.): 28 A-frame and gearbox assembly can be reversed Clutch, side shift [Read more]
Store: NorthernTool.com
|
Howse 3-Pt. Quick Hitch Category 2, Model# GQH2-BLK
$329.99
The Howse 3-pt. quick hitch features 2 spring-loaded handles for fast, easy attachment and release of 3-pt. implements. Hitch Type: 3-Point, Category Type: 2 Category 2 hitch 2 spring-loaded handles for fast, easy attachment and release of 3-pt. implements Heavy-duty steel construction Requires bushing set with roll pins, Item# 128101, sold separately [Read more]
Store: NorthernTool.com
|
|
Howse Bale Spear 3-Point, Category 1-2
$199.99
Features tapered forged spring steel spears designed for hard center bales allowing easy penetration and withdrawal. A special tapered socket provides support for spear. Truck Ship. Truck Ship. U.S.A. Hitch Type: 3 pt, Category Type: 1 and 2, Blade Type: Forged spring steel spears Mounts to category I/II tractor hitches [Read more]
Store: NorthernTool.com
|
Howse Box Blade 3-Point, Category 0, 4ft. Length
$329.99
Attach blade to tractor to level the landscape. Heavy-duty frame with powder-coat paint finish for durability. Working Width (in.): 48, Hitch Type: 3-Point, Category Type: 0, Blade Type: Box Blade, Shanks (qty.): 4, Adjustable Category 0 Hitch and Lift Pins Truck ship; U.S.A. [Read more]
Store: NorthernTool.com
|
Howse Box Blade 3-Point, Category 1, 6ft. Length, Model# EB72
$779.99
Reversible 1/2in. x 6in. high-carbon steel blade. Steel scarifiers have welded on, high-carbon teeth to break up compacted soils. Fits category 1 hitch, pins included. Truck Ship. U.S.A. Working Width (in.): 72, Hitch Type: 3-Point, Category Type: 1, Blade Type: Box Blade, Shanks (qty.): 6 [Read more]
Store: NorthernTool.com
|
Howse Chain Guard For Mower Model# 250185 4ft.
$229.99
Chain guard made in U.S.A. 4 ft. [Read more]
Store: NorthernTool.com
|
|
Howse Dirt Scoop 3-Point, Category 1-2, 30in. Length, Model# ES30
$339.99
Reinforced tubular steel frame. Carbon steel bucket has 9/32in. cutting edge. Bucket balances on center-mounted frame bushing for easy dumping. Spring loaded latch locks, tips and resets bucket from the tractor seat. Constructed of 2 3/8in. tube and 2 1/4in. angle iron frame. Complete with bucket, pull pins. U.S.A. Hitch Type: 3-Point, Category Type: 1, 2, Required HP: 25, Overall Dimensions L x W x H (in.): 46 x 37 x 33 Length: 30in. [Read more]
Store: NorthernTool.com
|
Howse Grader Blade 3-Point, 6ft. Length, Model# HFB6
$599.99
For Category I hitch and lift pins. Each has a 1/2in x 6in reversible cutting edge, spring-loaded latch-type tilt and easy full swing. Truck ship. U.S.A. Factory shipped. Working Width (in.): 72, Hitch Type: 3-Point, Category Type: 1, Blade Type: Grader Blade [Read more]
Store: NorthernTool.com
|
Howse Grader Blade 3-Point, Category 0, 4ft. Length, Model# ATVGB48
$249.99
Attach to tractor to move and level soil. Full swivel for easy maneuverability. Heavy-duty frame with powder-coat paint finish for durability. Working Width (in.): 48, Hitch Type: 3-Point, Category Type: 0, Blade Type: Grader Blade Category 0 Hitch and Lift Pins Welded cutting edge Truck ship; U.S.A. [Read more]
Store: NorthernTool.com
|
Howse Grader Blade 3-Point, Category 0-1, 6ft. Length, Model# MPH212
$429.99
Moldboard has adjustable reverse and forward positions. Replaceable high-carbon steel cutting edge. Moldboard rotates 360 on a 3in. king pin. Can be offset 6in. from each side of the center. Cutting angle locks into position by a heavy duty 3/4in. pin. Easy, full swivel 1/2in. x 6in. reversible cutting edge. Side shift and tilt by loosening or removing 5 bolts. Category 1 and 0 hitch. Category 1 pins included. 3in. x 3in. steel frame. Truck Ship. U.S.A. Working Width (in.): 72, Hitch Type: 3-Point, Category Type: 0, 1, Blade Type: Grader Blade [Read more]
Store: NorthernTool.com
|
|
Howse Grader Blade 7ft., Model# HFB7
$619.99
For Category I hitch and lift pins. Each has a 1/2in x 6in reversible cutting edge, spring-loaded latch-type tilt and easy full swing. Truck ship. U.S.A. Factory shipped. Working Width (in.): 84, Hitch Type: 3-Point, Category Type: 1, Blade Type: Grader Blade [Read more]
Store: NorthernTool.com
|
Howse Landscape Rake 3-Point, Category 0, 4ft. Length, Model# ATVLR48
$369.99
Attach this piece to tractor to groom the landscape. Features full swivel for easy maneuverability. Heavy-duty frame with powder-coat paint finish for durability. U.S.A. Hitch Type: 3-Point, Category Type: 0, Working Width (in.): 48 Category 0 Hitch and Lift Pins 1in. treated spring steel tines For use with subcompact tractors and ATVs that are Category 0 [Read more]
Store: NorthernTool.com
|
Howse Light-Duty Post Hole Digger Model# PHD25
$499.99
The Howse light-duty post hole digger is designed for use with Category 0 or 1 subcompact tractors of 25 HP or less. U.S.A. Auger Type: PTO, 3-Point, Auger Diameter Capability (in.): 6, 9 For Category 0 or 1 subcompact tractors of 25 HP or less Fits 1 1/2in. shaft Uses augers (Item#s 2501890 and 2501891, sold separately) Stand not included [Read more]
Store: NorthernTool.com
|
Howse Medium-Duty Post Hole Digger, Model# PHDM26
$499.99
Medium-duty post hole digger for tractors with 35 HP or less. Comes with #2 metric driveshaft. Truck ship. Augers sold separately. Auger Type: PTO, 3-Point [Read more]
Store: NorthernTool.com
|
|
Howse Moldboard Plows 3-Point, Category 1, 12in. Length, Model# MPH112
$529.99
Rugged 1in. x 4in. steel bar construction. 1-bottom design. All have replaceable share and shin. Plows easily connect to a 3-point hitch. Coulter kit (Item# 250199) and depth gauge (Item# 2501990) sold separately. U.S.A. Hitch Type: 3 pt, Category Type: 1 [Read more]
Store: NorthernTool.com
|
Howse Mower Chain Guard 5ft. Length
$279.99
Chain Guard made in U.S.A. 5 ft. [Read more]
Store: NorthernTool.com
|
Howse Spike-Tooth Harrow 3-Point, 5ft. Length
$599.99
Constructed of heavy-duty 3in. channel and 2in. x 2in. angle iron for long-lasting durability. Cultivates soil with 9in. x 3/4in. square spikes. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 60, Blade Type: Spike Tooth [Read more]
Store: NorthernTool.com
|
John Deere Replacement Cushion Seat
$119.99
Yellow vinyl seat cushion for John Deere tractors, combines and cotton pickers. Includes upper and lower backrests. All components with steel backs, high density foam. Color: Yellow, Shell: Vinyl, Material: Steel back high density foam, Includes: Upper and lower back rests Hardware not included [Read more]
Store: NorthernTool.com
|
|
King Kutter Angle Frame Disc Harrow 4 1/2-Ft., Combination, Model# 16-12-C
$559.99
King Kutter angle frame disc harrow features heavy angle iron frame construction, 1in. sq. high carbon steel axle, gray iron bearings and Category 1 hitch. Field-ready and built to last. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 54, Blades (qty.): 12, Blade Size (in.): 16, Blade Type: Combination; Notched Front, Plain Rear Discs Adjustable settings: 2 Cast iron bearing caps and spools with grease fitting Adjustable angle setting 1in. solid steel axle High carbon steel 3.0mm disc blades 7 1/2in. blade spacing U.S.A. Model 16-12-C [Read more]
Store: NorthernTool.com
|
King Kutter Boom Pole, Model# BP
$109.99
King Kutter boom pole is lightweight yet durable and easy to mount. Constructed from reinforced schedule 40 tubing and fits all 3-pt. hitches with Category 1 specifications. U.S.A. Hitch Type: 3-Point, Category Type: 1, Capacity (lbs.): 500, Overall Dimensions L x W x H (in.): 96 x 28 x 26 Schedule 40 tubing Reinforced bar Handy lifting loop Welded lifting pins U.S.A. Model BP [Read more]
Store: NorthernTool.com
|
King Kutter Box Blade 48in., Model# BB-48
$489.99
Designed for rugged use by landscapers, farmers, homeowners and in light construction. Great for landscaping, land leveling, back filling, grading and many other applications. Upper frame is constructed of heavy-gauge steel with replaceable lift and brace arms. 3-pt. Category 1 hitch. Truck ship. U.S.A. Working Width (in.): 48, Hitch Type: 3 pt, Category Type: 1, Shanks (qty.): 4 Approximately 48in. wide 4 shanks 20in. specially formed self-cleaning moldboard 2 high carbon steel reversing cutting edges (one front and one rear) Heavy-duty, heat-treated ripper shanks with replaceable heat-treated teeth Shank has 4-position adjustment holes that pin to reinforced frame 1/4in. x 4in. x 4in. shank housing box with slotted holes and pins U.S.A. Model BB-48 [Read more]
Store: NorthernTool.com
|
King Kutter Carry All, Model CA
$119.99
King Kutter carry all is a versatile tool with hundreds of uses. With a lift capacity of 1000 lbs., it makes a great tool to carry feed, rocks, wood, and fencing supplies, plus much more. Category 1 hitch. U.S.A. Hitch Type: 3-Point, Category Type: 1, Capacity (lbs.): 1, 000, Overall Dimensions L x W x H (in.): 36 x 28 x 36 Heavy-duty angle iron frame Frame has pre-punched holes for plywood or plank lumber to create a working platform U.S.A. Model CA [Read more]
Store: NorthernTool.com
|
|
King Kutter Field Cultivator, 6-Ft., Model# FCV-72-D
$699.99
King Kutters field cultivator performs a multitude of in-field tasks, including seedbed preparation, soil aeration, weed abatement and uniform incorporation of chemicals and fertilizers in the soil. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 72, Blades (qty.): 13, Blade Type: S Tines 13-shank, high-vibration Danish S-tines with reversible points Category 1 quick-hitch, 3-pt. staddle hitch Heavy-duty frame made of three 2in. square tubes Tines set up on 6in. centers and can be adjusted Lugs welded on frame provide a place to mount a drag harrow or other towed soil-leveling devices U.S.A. Model FCV-72-D [Read more]
Store: NorthernTool.com
|
King Kutter Flip Over Disc 48in., Model# 16-8-CDF
$689.99
Pull-type flip over disc is designed for the toughest applications. Adjustable height tongue allows you to use various sizes of 4-wheelers or small tractors. Rear receiver hitch can pull an ATV seeder or drag harrow. Truck ship. U.S.A. Hitch Type: Ball Receiver - 1 7/8 in., Working Width (in.): 48, Blades (qty.): 8, Blade Type: Notched Cutting angle: 20 Hitch ball dia.: 1 7/8in. Blade dia.: 16in. Blade thickness: 3.0mm 3in. square tube frame that can be weighted 1in. square axles Maintenance-free sealed bearings Rear receiver hitch for pulling an ATV seeder or drag harrow (ball hitch not included) U.S.A. Model 16-8-CDF [Read more]
Store: NorthernTool.com
|
King Kutter Heavy-Duty Rear Blade 84in., Model# HD-RB-84
$899.99
Heavy-duty rear blades are designed for dependable performance on tough jobs. Great for dirt work, road maintenance, ditching, landscaping, snow removal, cleaning livestock pens and more! Features reinforced moldboard that are fully gusseted for extra strength. Truck ship. U.S.A. Working Width (in.): 84, Hitch Type: 3-Point, Blade Type: Heavy Duty Grader Blade 5 forward and 5 reverse angle settings Right or left tilt Specially formed moldboard reinforced with back bracing at top and bottom; fully gusseted for strength and performance Heavy-duty, 3-pt. reinforced frame Reversible, heat-treated high carbon steel cutting edge 3/4in. thick steel indexed plate Easy adjustment from tractor Heavy-duty 2in. pivot pin attaches moldboard to frame U.S.A. Model HD-RB-84 [Read more]
Store: NorthernTool.com
|
King Kutter Landscape Rake 72in., Model# YR-72
$499.99
Versatile landscape rake is ideal for the professional landscaper, farmer, homeowner or contractor. Great for gravel road grading, lot maintenance, seed bed preparation, pasture renovation, rock, root or trash removal, plus much more. Truck ship. U.S.A. Hitch Type: 3-Point, Working Width (in.): 72, Blade Type: Landscape Rake, Tines (qty.): 36, Tines per Foot (qty.): 6 Reinforced 3-pt. wraparound frame for maximum strength 3in. x 3in. angle beam tine frame 5 forward and 5 reverse angle settings 5/16in. x 1in. heat-treated spring steel tines 1in. spacing between tines Tines individually mounted for durability Adjustable tine stabilizer bar U.S.A. Model YR-72 [Read more]
Store: NorthernTool.com
|
|
King Kutter Medium-Duty Rear Blade 60in. Blade Width, Model# RB-OT-60
$329.99
RB-OT Series Blades are designed for road grading and maintenance, landscaping, snow removal and more. 1-year limited warranty. Truck ship. U.S.A Working Width (in.): 60, Hitch Type: 3-Point, Blade Type: Medium Duty Grader Blade 5 forward and 5 reverse settings Special formed, fixed moldboard Reversible high carbon, heat-treated steel cutting edge Reinforced 3-pt. wraparound frame for extra strength Offset left or right up to 12in. Tilts to approx. 30 Truck Ship Factory Shipped 1-year limited warranty U.S.A. [Read more]
Store: NorthernTool.com
|
King Kutter Pallet Mover, Model# PM-15
$279.99
King Kutter pallet mover moves more than just pallets! You can haul hay, feed, fencing materials, boxes of fruit or vegetables and anything up to 2000 lbs. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Capacity (lbs.): 2, 000, Width Between Forks (in.): 24, Overall Dimensions L x W x H (in.): 44 x 28 x 34 Heavy-duty square and rectangular steel tube construction Reinforced corners Beveled ends for easy pallet 2000-lb. capacity at 24in. out from the main frame U.S.A. Model PM-15 [Read more]
Store: NorthernTool.com
|
King Kutter Professional Rear Blade 96in., Model# PRB-96
$569.99
Professional rear blades are designed for dependable performance on tough jobs. Great for dirt work, road maintenance, ditching, landscaping, snow removal, cleaning livestock pens and more! Truck ship. U.S.A. Working Width (in.): 96, Hitch Type: 3-Point, Blade Type: Professional Grader Blade 7 forward and 5 reverse angle settings Right or left tilt and offset Specially formed moldboard Heavy-duty, 3-pt. reinforced frame Reversible, heat-treated high carbon steel cutting edge U.S.A. Model PRB-96 [Read more]
Store: NorthernTool.com
|
King Kutter Rear Discharge Finish Mower 72in., Model# RFM-72
$1,629.99
King Kutters rear discharge finish mowers are built with quality features like the free-floating flex hitch system, which allows the mower to follow the contour of the ground, thus mowing evenly an uneven terrain. Heavy-duty steel deck, 1/4&Quot; thick blades, antiscalp roller and easy height adjuster are just some of the great features you get with this finish mower. Truck ship. U.S.A. Mower Type: Finish, Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 72, Gearbox Rating (HP): 40, PTO Drive Type: Shear Pin, Cutting Height (in.): 1 - 4 1/2, Blade Size L x W x Thickness (in.): 24 x 2 x 1/4, Blade Tip Speed (FPM): 18, 463, Overall Dimensions H x W x D (in.): 30 x 72 x 72 Single-belt design Category 1 free-floating flex hitch system 3/16in. top deck 3/16in. side panels; totally open rear deck 3 cast iron blade spindles with ball bearings Heavy-duty cast iron gearbox Shielded PTO shaft with shear pin Turf friendly 4-ply pneumatic tires Antiscalp roller Tubular wheel arms... [Read more]
Store: NorthernTool.com
|
|
Toplink Pin Category 1, 5 1/2in. Length
$2.39
Toplink Pin Category 1, 5 1/2in. Length Hitch Type: 3-Point, Category Type: 1, Overall Length (in.): 5 1/2, Usable Length (in.): 3 7/8, Pin Diameter (in.): 3/4 [Read more]
Store: NorthernTool.com
|
Clevis Has Heat-Treated Pin Straight
$12.99
Totally forged for excellent grain structure without the built-in stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. Clevis Type: Straight, Usable Length (in.): 4 1/4, Pin Diameter (in.): 3/4, Clevis Body Diameter (in.): 7/8, Working Load (lbs.): 16, 000, Clevis Opening Size (in.): 1 5/16 [Read more]
Store: NorthernTool.com
|
Clevis 7/16in. Dia, Heat Treated Pin
$2.99
Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. Clevis Type: Straight, Clevis Pin Type: Screw, Usable Length (in.): 1 7/16, Pin Diameter (in.): 7/16, Clevis Body Diameter (in.): 3/8, Working Load (lbs.): 3, 000 [Read more]
Store: NorthernTool.com
|
Toplink Pin Category 1, 4 1/2in. Length
$2.29
Toplink Pin Category 1, 4 1/2in. Length Hitch Type: 3-Point, Category Type: 1, Overall Length (in.): 4 1/2, Usable Length (in.): 2 3/4, Pin Diameter (in.): 3/4 [Read more]
Store: NorthernTool.com
|
|
|
|
|
|
|
|
