Briggs & Stratton Davey Twin Impeller Water Pump 7200 GPH, 9 HP, 1.5in., Model# AK282

9 HP Briggs & Stratton OHV Vanguard engine with electric start and recoil backup. Economical, compact, portable. Hi-pressure 2-stage twin impeller high efficiency pump. Marine-grade aluminum casing. 3-way discharge port. Nitrile rubber seal and casing O-rings. Self-priming up to 19ft. Proven robust design for long life. Corrosion-resistant materials. Low oil protection.Engine: 9 HP Briggs & Stratton OHV VanguardStarting Method: Electric Start with Recoil BackupPump is self-primingMaximum Total Head: 375ft.Maximum Suction Lift: 25ft.Inlet: 1 1/2in.Outlet: One 1 1/2in. and Two 1in. portsMoves up to 7200 GPH144 PSI high-pressure system great for fire protectionLow Oil ProtectionNitrile rubber seal and casting 0-ringsMarine-grade aluminum castingDimensions: 22.7in.L x 18.8in.W x 17.3in.H [Read more]

Merchant: NorthernTool.com

Davey Water Pump 4800 GPH, 6 HP, Model# AK280

High pressure system is great for fire protection. Economical, compact, portable. Hi-pressure 2-stage twin impeller high efficiency pump. Reliable 6 HP Briggs & Stratton OHV Vanguard engine with recoil start. Marine-grade aluminum casing. 3-way discharge port. Nitrile rubber seal and casing O-rings. Self priming up to 19ft. Proven robust design for long life. Corrosion-resistant materials. Low oil protection. Flow (GPH): 4, 800, Max. PSI: 125, Engine: Briggs & Stratton OHV Vanguard, HP: 6, Engine Displacement (cc): 296, Suction Port (in.): 1 1/2, Discharge Port (in.): 3 Ports: 1 (2), 1 1/2 (1), Max. Suction Lift (ft.): 25, Max. Total Head (ft.): 350, Self-Priming: Yes, Pump Housing: Marine Grade Aluminum, Seals: Nitrile Rubber, Impellers: Cast Aluminum, Start Type: Recoil, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 19 1/2 x 14 3/4 x 15 [Read more]

Merchant: NorthernTool.com

Delavan Variable Speed RV Water Pump 12 Volt, For Large Coaches, Model# 55AQUAJET-ARV

Variable speed water pump is ideal for your large RV. Includes fuse. U.S.A. Volts: 12 For large coaches Motor speed adjusts to water needs Positive shutoff at 75 to 85 PSI Pressure relief safety valve Capable of sustained low voltage operation [Read more]

Merchant: NorthernTool.com

Delavan Variable Speed RV Water Pump 12 Volt, For Small Coaches, Model# 55AQUAJET-AES

Efficiency model water pump is ideal for the smaller RV. Includes fuse. U.S.A. Volts: 12 For small coaches Motor speed adjusts to water needs Positive shutoff at 75 to 85 PSI Pressure relief safety valve Capable of sustained low voltage operation [Read more]

Merchant: NorthernTool.com

General Pump Brass Inline Water Filter Male NPT

1/2in. NPTM x 3/4in. GH-F low-pressure brass inline water filter with stainless steel filter adds protection to your pump by screening out particles from incoming water source. Provides longer life to pressure washer valves and seals. Clear plastic lets you see if filter needs cleaning. Female Inlet (in.): 1/2 NPTM x 3/4, Material: Stainless steel [Read more]

Merchant: NorthernTool.com

General Pump, Brass Inline Water Filter Female NPT

1/2in. NPTF x 3/4in. GH-F low-pressure brass inline water filter with stainless steel filter adds protection to your pump by screening out particles from incoming water source. Provides longer life to pressure washer valves and seals. Filter pulls out for easy cleaning. Includes 1/4in. hose barb for bypass back to pump inlet. Female Inlet (in.): 1/2 NPTF x 3/4, Material: Brass [Read more]

Merchant: NorthernTool.com

Gorman Rupp IPT Replacement Water Pump 12, 000 GPH, 5.0 - 6.5 HP, 2in., Model# 2G5

Only fits 5.0 to 6.5 HP engines with 5/8in. threaded shaft. General purpose cast aluminum water pump handles solids up to 5/8in.. Cast iron impellers and volutes for long life. EPDM O-rings and check valve. Silicon carbide/ceramic seat. Includes FREE strainer. U.S.A. Flow (GPH): 12, 000, Engine: N/A, HP: Fits 5 - 6.5, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 92, Solid Handling (in.): 5/8, Pump Housing: Cast Aluminum, Check Valve: EPDM, Seals: EPDM, Impellers: Cast Iron, Volute: Cast Iron, Start Type: N/A, Fuel Capacity (gal.): N/A, Run Time: N/A, Low Oil Shutdown: N/A [Read more]

Merchant: NorthernTool.com

IPT by Gorman-Rupp Water Pump 7200 GPH, 2in., Model# 2P5A

Self priming pump has 2in. NPT suction and discharge ports. Aluminum closed impeller; cast aluminum housing. Cast iron volute for long life. Built-in check valve; strainer eliminates clogging. EPDM gaskets and seals. U.S.A. Flow (GPH): 7, 200, Max. PSI: 88, Engine: Briggs & Stratton Intek, HP: 5.5, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 18, Max. Total Head (ft.): 200, Self-Priming: Yes, Pump Housing: Cast Aluminum, Check Valve: Built-In, Seals: EPDM, Impellers: Aluminum Closed, Volute: Cast Iron, Start Type: Recoil [Read more]

Merchant: NorthernTool.com

IPT by Gorman-Rupp Water Pump 8200 GPH, 160cc, 2in., Model# 2P5-HR

Ideal for fire-fighting and other high volume needs. Honda engine has cast iron cylinder, dual element air cleaner; and Oil Alert. 2in. suction and discharge ports. EPDM gaskets and seals. Pump runs 1 1/2 hours on a 3 quart tankful. U.S.A. Flow (GPH): 8, 200, Max. PSI: 75, Engine: Honda, HP: 5.5, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 18, Max. Total Head (ft.): 200, Self-Priming: Yes, Pump Housing: Cast Aluminum, Seals: EPDM, Impellers: Cast Iron, Volute: Cast Iron, Start Type: Recoil, Fuel Capacity (gal.): .75, Run Time: 1 1/2 Hours, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 22 23/32 x 18 13/16 x 17 5/16 [Read more]

Merchant: NorthernTool.com

IPT by Gorman-Rupp Water Pump 8200 GPH, 206cc, 2in., Model# 2P5IR

Ideal for fire-fighting and other high volume needs. Briggs & Stratton engine. Built in check valve for repriming. EPDM gaskets and seals. Comes with roll cage item# 108901. Includes FREE strainer. U.S.A. Flow (GPH): 8, 200, Max. PSI: 88, Engine: Briggs & Stratton Intek, HP: 6.5, Engine Displacement (cc): 206, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 18, Max. Total Head (ft.): 200, Self-Priming: Yes, Pump Housing: Cast Aluminum, Check Valve: Built-In, Seals: EPDM, Impellers: Nylon Zytel Plastic, Volute: Cast Iron, Start Type: Recoil, Fuel Capacity (gal.): .75, Run Time: 1 1/2 Hours, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 18 1/2 x 16 1/2 x 15 1/4 Engine has Oil Guard Engine has cast iron cylinder Dual element air cleaner [Read more]

Merchant: NorthernTool.com

Izumi Water Pump 1980 GPH, 118cc, 2in., Model# SMD-50HX

Remove rainwater ponding at construction sites, Clean out septic tanks, pumps waste water and more! Extra-low vibration and noise levels. 118cc Honda GX-120 overhead valve engine delivers dependable, efficient power. Heavy duty cast aluminum pump body and gear case make transportation easier. Rubber diaphragm and check valve are replaceable. Grease-filled gear unit is maintenance-free. 2in. inlet and outlet. Flow (GPH): 1, 980, Engine: Honda GX-120 OHV, HP: 4, Engine Displacement (cc): 118, Engine Speed (RPM): 3, 600, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 26.4, Max. Total Head (ft.): 52.8, Self-Priming: Yes, Solid Handling (in.): 1, Pump Housing: Cast Aluminum, Diaphragm: NBR (Synthetic Rubber), Check Valve: NBR (Synthetic Rubber), Start Type: Recoil (Electronic Ignition), Dimensions L x W x H (in.): 24 x 15 x 20 [Read more]

Merchant: NorthernTool.com

Mitsubishi-Powered High-Pressure Water Pump 7920 GPH, 195cc, 2in., Model# SERM-50V

High-pressure water pump is powered by a reliable Mitsubishi engine. Ideal for sprinkler systems, remote area firefighting, washing down equipment and more. Designed to push water long distances or great heights. Flow (GPH): 7920, Engine: Mitsubishi 190cc engine, Engine Displacement (cc): 195cc, Max. Suction Lift (ft.): 26-ft, Max. Total Head (ft.): 295-ft Designed to push water long distances or great heights Full roll cage protects pump and cage [Read more]

Merchant: NorthernTool.com

Northern Industrial Cast Iron Clear Water Pump 720 GPH, 1/2 HP, 1in.

Provides hours of dependable service! Perfect for a number of long-running water transfer applications on the farm, at the construction site and at home. Easy-mount, compact design. Cast iron electric pump has a powerful 110 Volt, 1/2 HP motor. 1in. inlet and outlet ports. 1-year limited warranty. Flow (GPH): 720, Volts: 110, Amps: 2.75, HP: 1/2, Max. Total Head (ft.): 110, Max. Suction Lift (ft.): 20, Max. PSI: 55, Suction Port (in.): 1, Discharge Port (in.): 1, Self-Priming: No, Impeller Shaft: Cast Brass Single phase motor Motor Speed: 3400 RPM Maximum Total Head: 110ft. Maximum Suction Lift: 20ft. with foot valve Moves up to 720 GPH at 2ft./10 GPM Cast iron construction Not submersible [Read more]

Merchant: NorthernTool.com

Northern Industrial Universal Generator/Water Pump Wheel Kit - Model# 2006Q000

Powder-coated steel tube handle has two 6/7in. PVC hand grips. Designed to work on 3/4in. and 1in. tubing for use on water pumps and generators. 14in. long handle 6/7in. PVC hand grips Two 10in. pneumatic, 300-lb. capacity tires For use on water pumps and generators that have a tubular frame [Read more]

Merchant: NorthernTool.com

Northern Industrial Water Pump Filter for Item#109955

Fits Pump #: 109955 Port Size: 1in. [Read more]

Merchant: NorthernTool.com

NorthStar High-Pressure Water Pump 7920, GPH, 132cc, 2in., Model# SEM-50V

Dependable Mitsubishi GM-132 engine powers this durable water pump. High-pressure system operates at 73 PSI. 2in. suction and discharge ports. Carbon ceramic mechanical seal resists wear and heat. Standard cast iron impeller and volute last long in fresh water applications. Not for sale in California. Flow (GPH): 7, 920, Max. PSI: 73, Engine: Mitsubishi GM-132, HP: 4, Engine Displacement (cc): 132, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 164, Self-Priming: Yes, Solid Handling (in.): 1/8, Seals: Carbon Ceramic Mechanical, Impellers: Cast Iron, Volute: Cast Iron, Start Type: Recoil Carbon ceramic mechanical seal resists wear and heat Standard cast iron impeller and volute last long in fresh water applications [Read more]

Merchant: NorthernTool.com

NorthStar Thermoplastic Water Pump 8718 GHP, 4.5 HP, 2in., Model# PG-50

Ideal for use with chemical-type water such as liquid fertilizer, herbicides or pesticides. Built for chemical and corrosion resistance with carbon ceramic with EPDM &Quot;rubber&Quot; mechanical seal, polyethylene pump casing, flange bracket and impeller, and SUS bolts and washers. Flow (GPH): 8, 718, HP: 4.5, Max. Total Head (ft.): 78.9 Powered by a 4.5 HP Robin EX13 engine 2in. suction/discharge ports total head 1/8in. max. solid size [Read more]

Merchant: NorthernTool.com

NorthStar Water Pump 15, 376 GPH, 195cc, 3in., Model# SE 80 EX

Compact water pump is powered by a self-priming 6 HP Mitsubishi engine. Pump features carbon ceramic seals that resist wear and endure heat. Cast iron impeller and volute deliver long-lasting performance in clear-water applications. Flow (GPH): 15, 376, Engine: Mitsubishi, HP: 6, Engine Displacement (cc): 195, Suction Port (in.): 3, Discharge Port (in.): 3, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 102, Self-Priming: Yes, Solid Handling (in.): 1/8, Seals: Carbon Ceramic, Impellers: Cast Iron, Volute: Cast Iron, Start Type: Recoil, Dimensions L x W x H (in.): 20 x 16 x 19 [Read more]

Merchant: NorthernTool.com

NorthStar Water Pump 15, 376 GPH, 6 HP, 3in., Model# SE 80 EX

Compact, lightweight pump with self-priming feature is powered by a 6 HP Robin EX17 commercial-grade engine that will run 2X longer than most other comparable engines. Standard cast iron impeller and volute last long in clear water applications. 2-year limited warranty.Engine: 6 HP Robin EX17 commercial-grade engineEngine Speed: 2500-4000 RPMPump is self-primingMaximum Total Head: 102ft.Maximum Suction Lift: 26ft.3in. ports handle solids up to 1/8in. in diameterMoves up to 15, 376 GPHFuel Tank: 0.95 gallonsStarting Method: Recoil Only (electronic ignition)Long life carbon ceramic mechanical seal resists corrosion, wear and heat much better than a standard sealCast iron impeller and volute last long in clear water pumps2-year limited warrantyModel SE 80 EX [Read more]

Merchant: NorthernTool.com

NorthStar Water Pump 1590 GPH, 19.8cc, 1in., Model# SEM-25L

Efficient, lightweight pump is powered by a 19.8cc Mitsubishi engine with technologically advanced 2-stroke design. Delivers 1590 GPH. EPA and CARB approved. Flow (GPH): 1, 590, Engine: Mitsubishi 2-Cycle, HP: .08, Engine Displacement (cc): 19.8, Suction Port (in.): 1, Discharge Port (in.): 1, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 115, Check Valve: Built-In, Seals: Carbon Ceramic Mechanical, Start Type: Recoil Long life carbon ceramic mechanical seal resists corrosion, wear and heat much better than a standard seal Aluminum die-cast pump parts Built-in check valve [Read more]

Merchant: NorthernTool.com

NorthStar Water Pump 9510 GPH, 126cc, 2in., Model# SEM-50G

Compact, lightweight pump is powered by a reliable 126cc Mitsubishi OHV engine. Carbon ceramic mechanical seal resists wear and heat. Standard cast iron impeller and volute last long in clear water applications. This item is not for sale in the state of California. Customers are responsible for checking local codes and regulations prior to purchase. Flow (GPH): 9, 510, Max. PSI: 42.7, Engine: Mitsubishi OHV, HP: 4, Engine Displacement (cc): 126, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 98, Self-Priming: Yes, Solid Handling (in.): 1/8, Seals: Carbon Ceramic Mechanical, Impellers: Cast Iron, Volute: Cast Iron, Start Type: Recoil (Electronic Ignition) Long-life carbon ceramic mechanical seal resists corrosion, wear and heat much better than a standard seal Cast iron impeller and volute last long in clear water pumps [Read more]

Merchant: NorthernTool.com

Pacer Water Pump 14, 400 GPH, 5 HP, 2in., Model# SE2JL HYC

Requires hydraulic pump with 9.2 GPM @ 1200 PSI, not included. Self-priming centrifugal pump is molded of glass reinforced polyester with stainless steel internal and external fasteners. Close coupled (hooked directly to hoses)EPDM O-rings, gasket, check valve and abrasion-resistant volute. Ideal for clear water, chemical and herbicide transfer. U.S.A. Flow (GPH): 14, 400, Engine: Requires Hydraulic Pump, HP: N/A, Engine Displacement (cc): N/A, Engine Speed (RPM): N/A, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 25, Max. Total Head (ft.): 75, Self-Priming: Yes, Pump Housing: Thermo Plastic Glass Reinforced Polyester, Check Valve: EPDM, Impellers: Glass Reinforced Polyester, Volute: Glass Reinforced Polyester, Start Type: N/A, Fuel Capacity (gal.): N/A, Run Time: N/A, Low Oil Shutdown: N/A, Dimensions L x W x H (in.): 13 3/4 x 11 x 12 Engine: Couple to hydraulic pump with 9.2 GPM @ 1200 PSI Stainless steel internal and external fasteners Thermo plastic pu... [Read more]

Merchant: NorthernTool.com

Pacer Water Pump 3450 GPH, 3 HP, 2in., Model# SE2FLPE

Must connect to a 3 HP or larger electric motor or gasoline engine. Be sure to protect electric motor from water. Water and chemical transfer pump has 115ft. head and is self-priming with built in check valve. Thermo plastic glass reinforced polyester housing. Ideal for clear water, chemical and herbicide transfer. Carrying handle. EPDM O-rings and seals. U.S.A. Flow (GPH): 10, 200, Max. PSI: 42, Engine: N/A, HP: Fits 3 or Larger, Engine Speed (RPM): Requires 3, 450, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 25, Max. Total Head (ft.): 115, Self-Priming: Yes, Pump Housing: Thermo Plastic Glass Reinforced Polyester, Check Valve: BUNA, Seals: EPDM, Impellers: Glass Reinforced Polyester, Volute: Glass Reinforced Polyester, Start Type: N/A, Fuel Capacity (gal.): N/A, Run Time: N/A, Low Oil Shutdown: N/A, Dimensions L x W x H (in.): 12 1/4 x 11 x 11 3/4 Engine: Couple to 3 HP or larger electric motor or gasoline engine (requires 3450 RPM) Moves up to 9, 480 ... [Read more]

Merchant: NorthernTool.com

Pacer Water Pump 8700 GPH, 148cc, 2in., Model# SEB2PLE3C

Water and chemical transfer pump is powered by a 148cc, 5.25 gross torque Briggs & Stratton engine. 100ft. head and self-priming thermo plastic pump with glass reinforced polyester housing. Ideal for clear water, chemical and herbicide transfer. Carrying handle. EPDM O-rings and seals. U.S.A. Flow (GPH): 8, 700, Max. PSI: 44, Engine: Briggs & Stratton, HP: 3.5, Engine Displacement (cc): 148, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 25, Max. Total Head (ft.): 100, Self-Priming: Yes, Pump Housing: Thermo Plastic, Seals: EPDM, Impellers: Glass Reinforced Polyester, Volute: Glass Reinforced Polyester, Start Type: Recoil, Dimensions L x W x H (in.): 17 1/2 x 15 x 12 Stainless steel internal and external fasteners Thermo plastic pump with glass reinforced polyester housing [Read more]

Merchant: NorthernTool.com

Star Water Systems 1/2 HP Pond Fountain Pump Model# SPS0501

Pre-assembled pond fountain pump delivers 3 interchangeable patterns. 115V motor with large round screen draws water below surface for improved aeration. U.S.A.NOTE: For use in 5-ft. or deeper water only.1/2 HP pumpProduces water fountain up to 15 feet high4900 GPH flow3 interchangeable patterns115V motorLarge round screen draws water below surface for improved aeration and extended motor lifeUV-resistant polyethylene floatIncludes 100-ft. 120V power cord with GFI plugFor use in 5-ft. or deeper water only [Read more]

Merchant: NorthernTool.com

TrunkPump PTO-Powered Water Pump 3in., Model# TP-3PT

The TrunkPump PTO-powered 3in. water pump features tool-free installation and primes in seconds. U.S.A. Flow (GPH): 18, 900, Max. PSI: 52, Engine: N/A, HP: N/A, Engine Displacement (cc): N/A, Engine Speed (RPM): N/A, Suction Port (in.): 3, Discharge Port (in.): 3, Max. Suction Lift (ft.): 25, Start Type: N/A, Fuel Capacity (gal.): N/A, Run Time: N/A, Low Oil Shutdown: N/A, Dimensions L x W x H (in.): 26 x 26 x 37 315 GPM Runs on tractorUs PTO, eliminating engine maintenance Removes water to 1/2in. Three-point hitch attaches easily to most utility tractors Compact design allows hoses to remain attached during transport and storage (hose not included) Requires PTO shaft to operate (Item# 11980, sold separately) [Read more]

Merchant: NorthernTool.com

Tsurumi Pumps Submersible Water Pump 3810 GPH, 1/2 HP, 2in., Model# LB4-80

Compact; excellent motor cooling efficiency. Allows continuous duty operation at low water levels, plus extended dry run capability. V-ring system protects shaft seal from abrasives. Silicon carbide-faced mechanical seal. 2in. discharge bore. Includes 32ft. cable. Not for use in fish ponds. 1-year limited warranty.110 Volt, 5.4 Amp motor has built-in protector39 1/2ft. Total Head Pumps down to 3 1/2in. Rubber Impeller Surge Amperage: 30.5 Continuous Amperage: 6.11-year limited warrantyModel LB4-80 [Read more]

Merchant: NorthernTool.com

Utility Water Pump 1200 GPH, 1/2 HP, 3/4in.

1/2 HP utility pump is made for long-lasting, heavy-duty use. Brush motor runs on standard 115V current. Pump is great for lawn watering, car washing, power washing and draining swimming pools and waterbeds. Rugged cast iron construction. Includes extra brush kit. 1200 GPH @ 10ft. lift with a standard garden hose. 3/4 in. inlet and outlet. U.S.A. Flow (GPH): 1, 200, Volts: 115, HP: 1/2, Max. Suction Lift (ft.): 10, Suction Port (in.): 3/4, Discharge Port (in.): 3/4, Pump Housing: Cast Iron [Read more]

Merchant: NorthernTool.com

Water and Trash Pump Strainer 1 1/2in.

Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 1 1/2in. round. [Read more]

Merchant: NorthernTool.com

Water and Trash Pump Strainer 2in.

Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 2in. round. [Read more]

Merchant: NorthernTool.com

Water and Trash Pump Strainer 3in.

Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 3in. round. [Read more]

Merchant: NorthernTool.com

Water and Trash Pump Strainer 4in. Round

Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 4in. round. [Read more]

Merchant: NorthernTool.com

Water Pump PVC Discharge Hose 4in. X 25 Feet

Includes male and female industrial pipe thread coupling. U.S.A. Description: 4in. x 25ft. [Read more]

Merchant: NorthernTool.com