DeWalt DW734 Heavy-Duty 12-1/2 inch Benchtop Thickness Planer with Three Knife Cutter-Head

"The DeWalt DW734 Heavy-Duty 12-1/2 inch Thickness Planer has a three knife cutter-head, which sets the surface finish delivered by DW734 thickness planer above the rest. The powerful 15 Amps, 10000 RPM motor combines with the 3 knife cutter-head to remove 96 cuts per inch. The M2 laminated knives are disposable and reversible. An intuitive, one tool knife change system allows the user to easily seat new knives on pins that are precision machined on the cutter-head. The pins ensure ease of installation and parallelism of all three knife edges. Extra-large folding tables and a four column carriage lock work together to minimize the movement that causes snipe. A material removal gauge, thickness scale and turret depth stop display accurate measurements of material dimensions and removal rate."

Makita UC170DWD 12V Cordless PVC/ABS Pipe Cutter Kit

The Makita UC170DWD is a 12V Cordless PVC/ABS Pipe Cutter Kit. Its long lasting chain blade cuts 4000 pieces of 4 inch PVC pipe with minimal oil required. The 7 inch Blade with 15 Teeth per Inch is ideal for cutting PVC and ABS Pipe.

DeWalt DW734 Heavy-Duty 12-1/2 inch Benchtop Thickness Planer with Three Knife Cutter-Head

"The DeWalt DW734 Heavy-Duty 12-1/2 inch Thickness Planer has a three knife cutter-head, which sets the surface finish delivered by DW734 thickness planer above the rest. The powerful 15 Amps, 10000 RPM motor combines with the 3 knife cutter-head to remove 96 cuts per inch. The M2 laminated knives are disposable and reversible. An intuitive, one tool knife change system allows the user to easily seat new knives on pins that are precision machined on the cutter-head. The pins ensure ease of installation and parallelism of all three knife edges. Extra-large folding tables and a four column carriage lock work together to minimize the movement that causes snipe. A material removal gauge, thickness scale and turret depth stop display accurate measurements of material dimensions and removal rate."

"DeWalt DW872 Heavy-Duty 14"" Multi-Cutter Saw, 1300 RPM, 15.0 Amps"

" The DeWalt DW872 multicutter saw is a dry cutting saw that uses a carbide-tipped blade specifically designed for cutting heavy-duty metals. The 14"" saw has enough capacity to cut from 5"" black pipe to 2-9/16"" solid bar stock. It is also great for cutting threaded rod, struts, angle iron, black pipe and rebar. The saw ensure smooth cutting which ensure very little need for touchup, reducing grinding and filling times. The carbide-tipped blade averages more than 1200 cuts in most applications and if maintained & sharpened regularly the blade delivers up to 5000 cuts. Most local blade shops will retarget the blade. The DW872 sports a powerful 15 Amps, 5.3 HP motor and is designed to stand up to rugged work on a regular basis. "

"Makita 4112H 12 inch Angle Cutter, 5000 RPM, 15.0 Amps"

Rubber shield helps keep debris away from operator and from entering the motorRemovable base for a closer edge-to-edge cutGuide wheels on the tool guard ensure smooth tool travel over surface materialTool body position can be adjusted (0 - 80) for operator comfort; operates independently of cutting depth for convenience and efficiencyRubberized wrap around handle for increased control and comfort with reduced operator fatigueLock-on button for continuous operationBall bearing construction for longer tool life

Makita DPC7311X1 14 inch Powered Power Cutter with free 14 inch Diamond Blade

"The Makita DPC7311X1 is a 14 inch Powered Power Cutter with free 14 inch Diamond Blade. The power cutter offers a fresh new design that enhances performance and provides greater operator comfort. The 73 cc power pack is loaded with new technological innovations such as the micro-chip controlled carburetor that compensates engine timing to work load. The new and improved 5 stage air filtration system is enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions. It is equipped with a spring tensioned belt adjustment with gauge to always ensure proper belt tensioning. The power cutter also features a compression release, single knob access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations."

Hobart 500534 Airforce 250CI Plasma Cutter with Air Compressor

"The Hobart 500534 is an Airforce 250CI Plasma Cutter with Air Compressor. The Airforce 250CI uses an electrical arc and compressed air to cut steel, aluminum and other conductive metals. It is designed to cut up to 1/4 inch steel by using a standard household current. It features a built-in air compressor and lightweight inverter power supply which make this Plasma Cutter the most convenient, totally portable cutting system available. The Air force 250CI excels at cutting sheet metal and 1/8 inch mild steel."

Husqvarna 968 27 34-01 371K Power Cutter

#NAME?

Husqvarna 968 27 64-01 375K Power Cutter

#NAME?

Hobart Welders 500474A Factory Reconditioned AirForce 400 Plasma Cutter

The AirForce 400 is an economical plasma cutting system for all conductive metals. Solid-state design and reliable technology pack a lot of performance into a very portable package. This power source adapts to work site by operating from either 115 or 230 VAC power.

"Hobart Welders 500493 Factory Reconditioned AirForce 625 Plasma Cutter, 75 PSI"

The Hobart Welders 500493R is a Factory Reconditioned AirForce 625 Plasma Cutter. The Airforce 625 plasma cutting and gouging system is excellent for light and heavy industrial users. Automated operations are also well within its range. The unit is compatible with engine-driven welders when powered with a 240V generator power outlet of 8 kW or more.

Hobart 500493A Factory Reconditioned AirForce TM 625 Plasma Cutter

"Specifications:-Rated cut of 1/2"" at 10"" per minute. Max cutting thickness 7/8"".-Rated output at 50% duty cycle: 40 amps at 140 VDC-Max. open circuit voltage: 260 VDC-Amps input at rated output, 60Hz: 33 @ 208V. 30 @ 230V. 8.5 kVA. 6.6 kW.-Plasma gas flow pressure: 6 CFM at 75 psi-Dimensions: 15-1/4""H x 10-3/8""W x 17-1/4""D. 60 lbs.-Processes: Air plasma cutting-Applications: Maintenance, prototyping, light construction, body shops, fabrication Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life ICE-40C torch with increased comfort, safety trigger prevents accidental starts Wind Tunnel Technology TM prevents abrasive dust and particles from damaging internal components Fan-on-Demand TM cooling system operates when needed, reducing the amount of airborne dust/dirt pulled through the unit Draws 30% less amperage than the competition, expands operator's work area via extension cords while minimizing nuisance trips caused by voltage drops Compatible with engine-driven welders - capable of cutting 3/8""-5/8"" mild steel when powered by an engine-driven welder with 240V generator power outlet of 8 kW or more Starts without high frequency, LVC TM line voltage compensation provides peak performance power under variable input voltage conditions (176-264 volts) for steady cuts and cleaner ending cuts Includes: Basic unit, ICE-40C hand-held torch with 25' lead, 20' heavy duty work cable with clamp, extra consumables (3 electrodes, 3 tips and 1 air fitting), and 12' industrial power cord and plug "

"Powermatic 1791316 209HH 20"" Planer with Bird Helical Cutter Head, 5 HP, 3 Phase, 230-460V"

" The Powermatic 1791316 is a 20"" Planer with Bird Helical Cutter Head. It features fully enclosed base cabinet with integrated casters. The cast iron table with extensions creates a big 55-1/2"" x 20"" working area. It has four feed speeds-24 and 31 SFPM, 16 and 20 SFPM with gear change. The feed rollers and cutterhead is supported by full cast iron head assembly. "