Chicago Pneumatic Heavy Duty 1 Inch Impact Wrench

Power regulator to match torque to the job. Movable dead handle adjusts for operator comfort. High output motor generates high torque levels. Variable speed trigger for precise control. Applications: truck springs, tractor pads, off road equipment, etc. Ultimate Torque: 1400 ft. -lbs. Specifications: Square Drive: 1 inch Weight: 23 lb. (10. 5 kg) Length: 11 (295mm) Avg. Air Consumption: 10 CFM Air Inlet NPTF in. 3/8 Min. Hose Size: 1/2 inch (13mm) Sound dBA Pressure: 97. 8 (107. 8 Power) Vibration: 9. 4 m/s Working Torque Range: 200-710 ft. -lb. (272-1234Nm) Ult. Torque 90 PSI Reverse: 1400 ft. -lb. (1900 Nm)

Astro Pneumatic 3/8 Inch Super Duty Air Ratchet Wrench

High performance motor delivers higher torque than standard ratchets 360 degree adjustable exhaust directs air away from work surface Short, robust crankshaft yeild power with low vibration Planetary gears with nitrided ring gear Self-lubricating rotor blades Reinforced throttle lever Ergonomic handle Specifications: Free speed: 200 RPM Max torque: 60 ft. -lbs. Air inlet: 1/4 inch NPT

Ingersoll-Rand 3/4 Inch Super Duty Extended Anvil Air Impact Wrench

3 inch extended anvil Jumbo hammer mechanism Up to 1,100 ft. -lbs. Of maximum torque Trouble-free, longer performance aided by the Pressure-Feed Lube System Compact size Handle exhaust Specifications: Working torque: 200-900 ft. -lbs. (272-952 Nm) Maximum torque: 1,100 ft. -lbs. (1,224 Nm) Blows per minute: 1,000 Free speed: 5,000 RPM Weight: 13 lbs. (5. 90 kg) Length: 11. 8 inch (300 mm) Average air consumption: 9. 5 cfm, 38 cfm load Sound (pressure/power): 101. 1/114. 1 dBA Air inlet: 3/8 inch

Ingersoll-Rand 1/2 Inch Super Duty Extended Anvil Air Impact Wrench

Specifically designed for heavy tire changes, this is the twin of the IR244, but with a 2 inch extended anvil you use with flip sockets. Powerful, with smooth, balanced blows. Pessure Feed Lubrication System automatically greases the impact mechanism. Specifications: Maximum Torque: 500 ft. -lb. Avg. Free Speed: 7,000 rpm Weight: 6. 28 lbs. (2. 85 kg) Sound Length: 9. 5 inch (241 mm) Avg. Air Consumption: 5. 4 cfm Minimum load: 21 cfm dBA (pressure/power): 105/109. 3 Inlet NPTF: 1/4 inch Hose Size: 3/8 inch (10 mm)

Ingersoll-Rand 3/8 Inch Super Duty Air Impact Wrench

Tremendous power and longer life make this wrench the popular choice for professional mechanics. The Single Hammer Impact Mechanism removes and replaces bolts up to 7/16 inch without a struggle. Power up to 180 ft-lbs. Unaffected by air pressure changes More torque, less vibration Pistol style, yet extremely compact and lightweight Built-in power regulator prevents over-torqueing Handle exhaust Specifications: Working torque: 20-150 ft. -lbs. (27-204 Nm) Maximum torque: 180 ft. -lbs. (245 Nm) Blows per minute: 1,500 Free speed: 10,000 RPM Weight: 2. 89 lbs. (1. 31 kg) Length: 6 inch (152 mm) Average air consumption: 2. 5 cfm, 11 cfm load Sound (pressure/power): 97. 5/110. 5 dBA Air inlet: 1/4 inch

Ingersoll-Rand 3/8 Inch Heavy Duty Air Impact Wrench

Combines power and economy for general service applications. It provides adjustable power output in foward and reverse with handle exhaust to direct air away from the operator and the work. 160 ft. -lbs. Of maximum torque Two-piece housing for easy service Comfortable ergonomic handle design Specifications: Working torque: 15-300 ft. -lbs. (20-176 Nm) Maximum torque: 160 ft. -lbs. (217 Nm) Blows per minute: 1,600 Free speed: 9,500 RPM Weight: 2. 89 lbs. (1. 31 kg) Length: 6. 125 inch (156 mm) Average air consumption: 3 cfm, 13 cfm load Sound (pressure/power): 80. 6/93. 6 dBA Air inlet: 1/4 inch

Ingersoll-Rand 1 Inch Drive Super Duty Impact Wrench With 6 Inch Ext. Anvil - Ergo Grip Design

Extended, robust bushing is at least 2 times more durable for extended life. Lighter weight in front of the gun. 33 lbs lighter vs. IR2080-6,. 58 lbs lighter vs. IR2080 Titanium hammer case weighs less and provides greater durability Coarse threading reduces stripping 7-Vane motor delivers 1,600 ft-lbs max torque Ergonomic Chainsaw handle and grip for better control and comfort Net weight: 15. 5 lbs Weighs up to 14. 7 lbs less than CP797-6 6,800 rpm 21. 5 inch long Power settings: 3 forward, 1 reverse Made in USA

Ingersoll-Rand 3/4 Inch Super Duty Extended Anvil Air Impact Wrench

3 inch extended anvil Jumbo hammer mechanism Up to 1,100 ft. -lbs. Of maximum torque Trouble-free, longer performance aided by the Pressure-Feed Lube System Compact size Handle exhaust Specifications: Working torque: 200-900 ft. -lbs. (272-952 Nm) Maximum torque: 1,100 ft. -lbs. (1,224 Nm) Blows per minute: 1,000 Free speed: 5,000 RPM Weight: 13 lbs. (5. 90 kg) Length: 11. 8 inch (300 mm) Average air consumption: 9. 5 cfm, 38 cfm load Sound (pressure/power): 101. 1/114. 1 dBA Air inlet: 3/8 inch

Ingersoll-Rand 3/4 Inch Standard Duty Air Impact Wrench

The IR 252 is an economical standard duty 3/4 inch wrench for engine teardowns or general maintenance. This is a good lightweight 3/4 inch wrench with a high power rating for its compact size. Full power in reverse; 3 position adjustable power in foward 750 ft. -lbs. Of maximum torque Integral 360 degree swivel inlet Handle exhaust Lightweight and easy to operate Long trouble free life insured by oil bath lubrication Specifications: Working torque: 100-500 ft. -lbs. (136-680 Nm) Maximum torque: 750 ft. -lbs. (1,020 Nm) Blows per minute: 1,200 Free speed: 6,500 RPM Weight: 8. 6 lbs. (3. 9 kg) Length: 9 inch (229 mm) Average air consumption: 7. 5 cfm, 28 cfm load Sound (pressure/power): 92. 1/105. 1 dBA Air inlet: 3/8 inch

Ingersoll-Rand 3/4 Inch Ultra Duty Air Impact Wrench

Combines a six-vane high output air motor, through-bolt construction, ergonomic handle and housing design to create an impact tool that offers increases power and durability like no other. Most durable 3/4 inch impact in the industry Maximum torque - 1,250 ft. -lbs. 6,000 RPM, 1,025 BPM Full power reverse 3-position power regulator 360 degree swivel inlet

Ingersoll-Rand 1/2 Inch Dr. TNT Air Impact Wrench With Quiet Technology

Titanium Series Impact now with Quiet Technology - New quiet technology preserves maximum torque output with reduced noise levels compared to traditional impact tools. TOUGHER: Titanium means this tool will stand up under the toughest environments STRONGER: TNT Torque - The titanium tools have the highest power-to-weight ratio of all other impacts in their class SMALLER: Narrow hammer case for greater access to tight areas LIGHTER: Titanium provides incredible strength in a lightweight alloy Delivers 1,000 ft. -lbs. Of Nut Busting Torque (loosens a nut tightened to 1,000 ft. -lbs. ) and 700 ft. -lbs. Of traditional torque output. 9500 RPM 3. 95 lbs tool weight. Same power as the 2135TI but wih reduced noise levels.

Ingersoll-Rand 1/2 Inch Super Duty Air Impact Wrench

Bring out the big gun for tire-changing, shock and spring work, front end work, and other heavy automotive and truck work. Powerful, with smooth, balanced blows. Pessure Feed Lubrication System automatically greases the impact mechanism. Specifications: Maximum Torque: 500 ft. -lb. Avg. Free Speed: 7,000 rpm Weight: 6 lbs. (2. 72 kg) Sound Length: 7. 3 inch (185 mm) Avg. Air Consumption: 5. 4 cfm Minimum load: 21 cfm dBA (pressure/power): 105/109. 3 Inlet NPTF: 1/4 inch Hose Size: 3/8 inch (10 mm)

Chicago Pneumatic 1/2 Inch Air Impact Wrench

Differential regulator allows the operator to match the required power to the job Improved oil bath DYNA-PACT clutch delivers higher performance and extended durability Handle exhaust directs air away from the workpiece and operator Teasing throttle design for precise control Applications: overall automotive service, body shop, farm, light truck work, etc. Ultimate Torque: 425 ft. -lbs. Specifications: Square Drive in. 1/2 Weight lb. 5-1/8 Length in. 7-1/2 Avg. Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Working Torque Range ft. -lb. 25-310 Ult. Torque 90 PSI ft. -lb. 425

Chicago Pneumatic 1/2 Inch Air Impact Wrench With 2 Inch Extended Anvil

The CP7733-2 version offers all the design advantages of the standard CP7733 with an important addition - a 2 inch extended anvil that complements wheel and tire installations. Energy efficient air motor for increased power with less air. Streamline housing for better styling and reduced weight. Easy to read power management control dial. Ergonomic grip for less hand stress. More durable 6 vane rotor for increased durability. Patented Spring Hammer Clutch increases life by 35. Ergonomic trigger for more comfort during operation. Product Specifications: Square Drive (in) 1/2 Working Torque Range Ft. -lbs. (Nm) 25-400(34-542) Max Torque 90 PSI Rev. Ft. -lbs. (Nm) 550(746) Free Speed(rpm) 7,000 Weight lbs. (kg) 5. 9(2. 7) Length in(mm) 9. 1(231) Avg Air Consumption CFM(l/min) 4. 75(106) Air Inlet Thread Size NPTF in. 1/4 Sound dBA Pressure 96 Vibration m/s(square) 4. 0

Chicago Pneumatic Extra Heavy Duty 3/4 Inch Impact Wrench

Variable speed trigger provides controlled start-ups. Handle exhaust directs air away from the worrkpiece and operator. Rugged clutch mechanism for extended durability under heavy use. Power regulator allows the operator to match the required power to the job. Applications: spring work, tractor pad removal, farm equipment, etc. Ultimate Torque: 1150 ft. -lbs. Specifications: Square Drive: 3/4 inch Weight: 12 lbs. (5. 6 kg) Length: 8 (194mm) Avg. Air Consumption: 8 CFM Air Inlet NPTF in. 3/8 inch Min. Hose Size: 1/2 inch (13mm) Sound dBA Pressure: 99. 1 (109 Power) Vibration: 6 m/s Working Torque Range: 200-750 ft. -lb. (270-1000 Nm) Ult. Torque 90 PSI Fwd/Rev: 1150 ft. -lb. (1540 Nm)