Online Shopping

www.sapiensman.com


Search :

HOME : Shopping

 

Tools & Equipment Search  

small banner

<< Previous Catalog - Home - Next Catalog >> 



#16 << Previous Page - Page #1 - Next Page >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 -
Retaining Magnet Assembly w/ Threaded Stud and Rubber Jacket - 1.69


Retaining Magnet Assembly w/ Threaded Stud and Rubber Jacket - 1.69" Dia. Zinc Plated Steel
Business & Industrial
Global Industrial
These magnets are a shielded magnetic assembly with rubber jacket. They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force. Type ND temperature resistant to 175 F (80 C). - - -
**** PRICE: 30.95 USD
Manufacturer : J.W. WINCO, INC
SKU: B804077
UPC: 664423486973
Tags: | Construction. Industrial supply

Start of page
MPI Rare Earth Grate Magnet 316 SS 10


MPI Rare Earth Grate Magnet 316 SS 10" Round
Business & Industrial
Global Industrial
MPI grate magnets are designed to remove medium and small-size ferrous tramp metal contaminants from dry, granular free-flowing product streams in gravity-fed vertical chutes, hoppers, housings, or bins. They are easy to install and clean. Magnetic grates offer efficient, economical magnetic protection of processing equipment, such as milling, extruding, and mixing, while improving product purity. With these types of magnetic separators, the product stream flows through a row of 1" diameter magnetic tubes, located on 2" centers, allowing 1" of space between each tube. The tubes are held in place with a welded stainless-steel support frame. As tramp metal contaminants are captured, they move to the underside of the magnetic tubes, eliminating tramp metal "wash-off". All tubes are fully welded for the highest durability, no crimped or mechanically sealed end plugs. All MPI grate magnets are proudly manufactured in the USA. - - -
**** PRICE: 961.00 USD
Manufacturer : MAGNETIC PRODUCTS INC
SKU: B3081361
UPC:
Tags: | Construction. Industrial supply

Start of page
J.W. Winco 55.2-SC-4-3 Solid Disk-Shaped Raw Magnet - .16


J.W. Winco 55.2-SC-4-3 Solid Disk-Shaped Raw Magnet - .16" Diameter, Steel
Business & Industrial
Global Industrial
GN 55.2 Solid Disk-Shaped Raw Magnets are unshielded disc-shaped (annular) magnets. Owing to the vast range of different materials and sizes, these magnets are suitable for virtually any universal use. They are typically attached by gluing. When used without air gap, individual raw magnets always have lower adhesive forces than a magnet assembly in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets--unlike magnet assemblies--can have substantially higher adhesive forces. In the event that no suitable retaining magnets / magnet assemblies are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet assemblies. Temperature resistant to 390 F (200 C). - - -
**** PRICE: 2.56 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157454
UPC: 664423493254
Tags: | Construction. Industrial supply

Start of page
Retaining Magnet Assembly w/ Threaded Bushing - .98


Retaining Magnet Assembly w/ Threaded Bushing - .98" Dia. Stainless Steel
Business & Industrial
Global Industrial
These magnets are a shielded magnetic assembly. Due to the lower magnetic conductivity of the stainless steel housing, the magnetic forces are lower than with steel. Temperature resistant to 390 F (200 C). - - -
**** PRICE: 8.80 USD
Manufacturer : J.W. WINCO, INC
SKU: B804010
UPC: 664423484481
Tags: | Construction. Industrial supply

Start of page
J.W. Winco 50.3-ND-25-M6 Retaining Magnet Assembly Disc-Shaped w/ Threaded Stud - .98


J.W. Winco 50.3-ND-25-M6 Retaining Magnet Assembly Disc-Shaped w/ Threaded Stud - .98" Dia, Steel
Business & Industrial
Global Industrial
GN 50.3 magnets are a shielded magnetic assembly. Temperature resistant to 175 F (80 C). - - -
**** PRICE: 18.00 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157461
UPC: 664423484931
Tags: | Construction. Industrial supply

Start of page
Max-Attach Polymagnet Rare Earth Disc w/ Adhesive - 1.50


Max-Attach Polymagnet Rare Earth Disc w/ Adhesive - 1.50" Dia. x 0.12" Thick
Business & Industrial
Global Industrial
Much stronger and safer than traditional magnets: Max-Attach Polymagnets have unique possibilities compared to conventionally magnetized magnets. A particular magnetic function is encoded into the magnet, focusing the magnetic field for better magnet on metal performance. This revolutionary technology can deliver much greater shear strength and holding power than conventional magnets of the same size and grade for outstanding performance in standard applications such as magnetic hooks and hangers, magnetic whiteboards, and magnetic paint or primer. Unmatched Performance on Thin Metal Traditional magnets don't hold very well to thin metal. This is because the magnetic field does not saturate the metal and extends through to the other side, where its magnetic energy is wasted and doesn't contribute to the holding force. The magnetic field on a Max-Attach Polymagnet is focused closer to the face of the magnet and therefore saturates the metal more efficiently, creating stronger holding forces on thin metal. Incredible Shear Strength In magnetic applications, shear strength refers to the amount of weight a magnet can hold when attached to a vertical surface. Max-Attach Polymagnets exhibit 2x to 8x more shear strength than conventional magnets, which just do not hold well on vertical surfaces and slide easily on metal. This is due to the difference in field saturation efficiency between conventional magnets and Polymagnets . Safer Magnets Max-Attach Polymagnets allow for incredible control of the magnetic field and are safer than traditional magnets because they can be encoded only to engage at very close proximity to either metal or other magnets. The "reach-out" of the magnetic field can be varied to suit specific design requirements. - - -
**** PRICE: 40.00 USD
Manufacturer : INDUSTRIAL MAGNETICS, INC
SKU: B2258839
UPC: 682241289705
Tags: | Construction. Industrial supply

Start of page
Master Magnetics Neodymium Hang-It Magnet RB50EBNEO with Attached Eyebolt 90 Lb. Pull Chrome Plating - Pkg Qty 100


Master Magnetics Neodymium Hang-It Magnet RB50EBNEO with Attached Eyebolt 90 Lb. Pull Chrome Plating - Pkg Qty 100
Business & Industrial
Global Industrial
Hang-It Magnet with Attached Eyebolt. Hang coats, suits or signs. Powerful round base magnet includes attached eyebolt. - Pkg Qty 100 - - -
**** PRICE: 1625.00 USD
Manufacturer : MASTER MAGNETICS, INC.
SKU: B1798418
UPC: 10095421005076
Tags: | Construction. Industrial supply

Start of page
Master Magnetics Ceramic Round Base Magnet RB80PRCBX - 95 Lbs. Pull - Pkg Qty 24


Master Magnetics Ceramic Round Base Magnet RB80PRCBX - 95 Lbs. Pull - Pkg Qty 24
Business & Industrial
Global Industrial
Master Magnetics Ceramic Round Base Magnet RB80PRCBX - 95 Lbs. Pull Round base magnets are powerful, low-profile magnets with an attachment hole in the center. Attach a hook or knob to position or hold inspection equipment, indicator gauges, lamps, signs, antennas and more. Magnetic on one side. All round base magnets are nickel or nickel/chrome plated for durability. - Pkg Qty 24 - - -
**** PRICE: 117.36 USD
Manufacturer : MASTER MAGNETICS, INC.
SKU: B1798408
UPC: 10095421009562
Tags: | Construction. Industrial supply

Start of page
Retaining Magnet Assembly w/ Threaded Stud and Rubber Jacket - 2.60


Retaining Magnet Assembly w/ Threaded Stud and Rubber Jacket - 2.60" Dia. Zinc Plated Steel
Business & Industrial
Global Industrial
These magnets are a shielded magnetic assembly with rubber jacket. They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force. Type ND temperature resistant to 175 F (80 C). - - -
**** PRICE: 39.95 USD
Manufacturer : J.W. WINCO, INC
SKU: B804028
UPC: 664423486980
Tags: | Construction. Industrial supply

Start of page
Global Industrial Ceramic Mount-It Magnet w/ Attached Screw & Nuts, 65 Lbs. Pull, 6/Pack


Global Industrial Ceramic Mount-It Magnet w/ Attached Screw & Nuts, 65 Lbs. Pull, 6/Pack
Business & Industrial
Global Industrial
&checkmark; Durable and powerful. &checkmark; Holds up to 65 lbs. &checkmark; A damage-free solution to hang contents. Hold tools, cables, and a wide variety of other items with the Global Industrial Ceramic Mount-It Magnet with Attached Screw and Nuts. Perfect for convenient reaching access in homes, schools, workshops, offices, and garages. The strong magnetic grip connects to any ferrous metal for reliable stability and support. The chrome plated finish offers a traditional appearance to fit any industrial location. Includes 6 per pack. 1-Year Limited Warranty. - - -
**** PRICE: 23.75 USD
Manufacturer : Global Industrial
SKU: 320762
UPC: 707022410755
Tags: | Construction. Industrial supply

Start of page
JW Winco Retaining Magnet Assembly Disc-Shape w/Countersunk Thru Hole, .63


JW Winco Retaining Magnet Assembly Disc-Shape w/Countersunk Thru Hole, .63" Dia, Steel
Business & Industrial
Global Industrial
GN 50.4 magnets are a shielded magnetic assembly. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. Temperature resistant to 390 F (200 C), - - -
**** PRICE: 3.95 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157474
UPC: 664423485020
Tags: | Construction. Industrial supply

Start of page
MPI Rare Earth Tube 316 SS 1


MPI Rare Earth Tube 316 SS 1" x 6"
Business & Industrial
Global Industrial
MPI magnetic tubes are proudly made in the USA and are commonly used to remove small to medium size ferrous tramp metal contaminants from a variety of product streams. Typical uses for magnetic tubes include removing ferrous metal from dry or liquid products commonly caused by metal-on-metal wear or other product contamination. Magnetic tubes protect process equipment and help ensure a high-quality metal free product. All tube ends are provided with1/4"-20 tapped holes and are fully welded for the highest durability, no crimped or mechanically sealed end plugs. - - -
**** PRICE: 235.95 USD
Manufacturer : MAGNETIC PRODUCTS INC
SKU: B3081388
UPC:
Tags: | Construction. Industrial supply

Start of page
Max-Attach Polymagnet Rare Earth Disc - 0.75


Max-Attach Polymagnet Rare Earth Disc - 0.75" Dia. x 0.12" Thick
Business & Industrial
Global Industrial
Much stronger and safer than traditional magnets: Max-Attach Polymagnets have unique possibilities compared to conventionally magnetized magnets. A particular magnetic function is encoded into the magnet, focusing the magnetic field for better magnet on metal performance. This revolutionary technology can deliver much greater shear strength and holding power than conventional magnets of the same size and grade for outstanding performance in standard applications such as magnetic hooks and hangers, magnetic whiteboards, and magnetic paint or primer. Unmatched Performance on Thin Metal Traditional magnets don't hold very well to thin metal. This is because the magnetic field does not saturate the metal and extends through to the other side, where its magnetic energy is wasted and doesn't contribute to the holding force. The magnetic field on a Max-Attach Polymagnet is focused closer to the face of the magnet and therefore saturates the metal more efficiently, creating stronger holding forces on thin metal. Incredible Shear Strength In magnetic applications, shear strength refers to the amount of weight a magnet can hold when attached to a vertical surface. Max-Attach Polymagnets exhibit 2x to 8x more shear strength than conventional magnets, which just do not hold well on vertical surfaces and slide easily on metal. This is due to the difference in field saturation efficiency between conventional magnets and Polymagnets . Safer Magnets Max-Attach Polymagnets allow for incredible control of the magnetic field and are safer than traditional magnets because they can be encoded only to engage at very close proximity to either metal or other magnets. The "reach-out" of the magnetic field can be varied to suit specific design requirements. - - -
**** PRICE: 48.12 USD
Manufacturer : INDUSTRIAL MAGNETICS, INC
SKU: B2258845
UPC: 682241289200
Tags: | Construction. Industrial supply

Start of page
Max-Attach Polymagnet Rectangular Rare Earth Magnet - 0.18


Max-Attach Polymagnet Rectangular Rare Earth Magnet - 0.18" Thick x 1.00" W x 1.50" L
Business & Industrial
Global Industrial
Much stronger and safer than traditional magnets: Max-Attach Polymagnets have unique possibilities compared to conventionally magnetized magnets. A particular magnetic function is encoded into the magnet, focusing the magnetic field for better magnet on metal performance. This revolutionary technology can deliver much greater shear strength and holding power than conventional magnets of the same size and grade for outstanding performance in standard applications such as magnetic hooks and hangers, magnetic whiteboards, and magnetic paint or primer. Unmatched Performance on Thin Metal Traditional magnets don't hold very well to thin metal. This is because the magnetic field does not saturate the metal and extends through to the other side, where its magnetic energy is wasted and doesn't contribute to the holding force. The magnetic field on a Max-Attach Polymagnet is focused closer to the face of the magnet and therefore saturates the metal more efficiently, creating stronger holding forces on thin metal. Incredible Shear Strength In magnetic applications, shear strength refers to the amount of weight a magnet can hold when attached to a vertical surface. Max-Attach Polymagnets exhibit 2x to 8x more shear strength than conventional magnets, which just do not hold well on vertical surfaces and slide easily on metal. This is due to the difference in field saturation efficiency between conventional magnets and Polymagnets . Safer Magnets Max-Attach Polymagnets allow for incredible control of the magnetic field and are safer than traditional magnets because they can be encoded only to engage at very close proximity to either metal or other magnets. The "reach-out" of the magnetic field can be varied to suit specific design requirements. - - -
**** PRICE: 73.50 USD
Manufacturer : INDUSTRIAL MAGNETICS, INC
SKU: B2258829
UPC: 682241288401
Tags: | Construction. Industrial supply

Start of page
Max-Attach Polymagnet Rectangular Magnet w/ Adhesive - 0.12


Max-Attach Polymagnet Rectangular Magnet w/ Adhesive - 0.12" Thick x 1.50" W x 1.50" L
Business & Industrial
Global Industrial
Much stronger and safer than traditional magnets: Max-Attach Polymagnets have unique possibilities compared to conventionally magnetized magnets. A particular magnetic function is encoded into the magnet, focusing the magnetic field for better magnet on metal performance. This revolutionary technology can deliver much greater shear strength and holding power than conventional magnets of the same size and grade for outstanding performance in standard applications such as magnetic hooks and hangers, magnetic whiteboards, and magnetic paint or primer. Unmatched Performance on Thin Metal Traditional magnets don't hold very well to thin metal. This is because the magnetic field does not saturate the metal and extends through to the other side, where its magnetic energy is wasted and doesn't contribute to the holding force. The magnetic field on a Max-Attach Polymagnet is focused closer to the face of the magnet and therefore saturates the metal more efficiently, creating stronger holding forces on thin metal. Incredible Shear Strength In magnetic applications, shear strength refers to the amount of weight a magnet can hold when attached to a vertical surface. Max-Attach Polymagnets exhibit 2x to 8x more shear strength than conventional magnets, which just do not hold well on vertical surfaces and slide easily on metal. This is due to the difference in field saturation efficiency between conventional magnets and Polymagnets . Safer Magnets Max-Attach Polymagnets allow for incredible control of the magnetic field and are safer than traditional magnets because they can be encoded only to engage at very close proximity to either metal or other magnets. The "reach-out" of the magnetic field can be varied to suit specific design requirements. - - -
**** PRICE: 59.90 USD
Manufacturer : INDUSTRIAL MAGNETICS, INC
SKU: B2258825
UPC: 682241289903
Tags: | Construction. Industrial supply

Start of page
MPI Rare Earth Tube 316 SS 1


MPI Rare Earth Tube 316 SS 1" x 24"
Business & Industrial
Global Industrial
MPI magnetic tubes are proudly made in the USA and are commonly used to remove small to medium size ferrous tramp metal contaminants from a variety of product streams. Typical uses for magnetic tubes include removing ferrous metal from dry or liquid products commonly caused by metal-on-metal wear or other product contamination. Magnetic tubes protect process equipment and help ensure a high-quality metal free product. All tube ends are provided with1/4"-20 tapped holes and are fully welded for the highest durability, no crimped or mechanically sealed end plugs. - - -
**** PRICE: 626.00 USD
Manufacturer : MAGNETIC PRODUCTS INC
SKU: B3081396
UPC:
Tags: | Construction. Industrial supply

Start of page
J.W. Winco 50.5-ND-32 Retaining Magnet Assembly Disc-Shaped w/ Tapped Hole - 1.26


J.W. Winco 50.5-ND-32 Retaining Magnet Assembly Disc-Shaped w/ Tapped Hole - 1.26" Diameter, Steel
Business & Industrial
Global Industrial
GN 50.5 magnets are a shielded magnetic assembly. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. For magnets with d1 diameter = 40 mm, magnet surface is exposed. For d1 diameters >/= 50 mm, the magnetic surface of the magnet is covered with a plastic cap. Temperature resistant to 175 F (80 C). - - -
**** PRICE: 19.75 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157516
UPC: 664423485181
Tags: | Construction. Industrial supply

Start of page
Retaining Magnet Assembly w/ Thru Hole - 1.57


Retaining Magnet Assembly w/ Thru Hole - 1.57" Dia. Stainless Steel
Business & Industrial
Global Industrial
These magnets are a shielded magnetic assembly. Due to the lower magnetic conductivity of the stainless steel housing, the magnetic forces are lower than with steel. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. Type HF temperature resistant to 390 F (200 C). - - -
**** PRICE: 10.00 USD
Manufacturer : J.W. WINCO, INC
SKU: B804015
UPC: 664423484986
Tags: | Construction. Industrial supply

Start of page
Global Industrial Neodymium Magnetic Hook, 40 Lbs. Pull, 6/Pack


Global Industrial Neodymium Magnetic Hook, 40 Lbs. Pull, 6/Pack
Business & Industrial
Global Industrial
&checkmark; Durable and powerful. &checkmark; Holds up to 40 lbs. &checkmark; A damage-free solution to hang contents. Neatly hang a wide variety of objects within reach with the Global Industrial Neodymium Magnetic Hook. Ideal for holding tools, cables, or personal items, these hooks are perfect for use around your home, school, workshop, office, or garage. The chrome plated finish is attractive and blends into any industrial location, while its magnetized grip connects to any ferrous metal. Includes six hooks per pack. 1-Year Limited Warranty. - - -
**** PRICE: 33.95 USD
Manufacturer : Global Industrial
SKU: 320758
UPC: 707022410717
Tags: | Construction. Industrial supply

Start of page
Master Magnetics Ceramic Hang-It Magnet RB100POST with Attached Grooved Post 200 Lbs. Pull Chrome - Pkg Qty 12


Master Magnetics Ceramic Hang-It Magnet RB100POST with Attached Grooved Post 200 Lbs. Pull Chrome - Pkg Qty 12
Business & Industrial
Global Industrial
Hang-It Magnet with Attached Grooved Post. Hang coats, suits or signs. Powerful round base magnet includes grooved post. - Pkg Qty 12 - - -
**** PRICE: 219.00 USD
Manufacturer : MASTER MAGNETICS, INC.
SKU: B1798419
UPC: 10095421001764
Tags: | Construction. Industrial supply

Start of page
Master Magnetics Rubber Cover RC-RB50 for Round Magnetic Cups RB50 - 2.04


Master Magnetics Rubber Cover RC-RB50 for Round Magnetic Cups RB50 - 2.04" Dia., .315 Hole, Pkg of 4
Business & Industrial
Global Industrial
Master Magnetics Rubber Cover RC-RB50X4 for Round Base Magnetic Cups RB50 - 2.04" Dia. & .315 Hole, Pkg of 4 New rubber covers fit perfectly over four of our best-selling round base magnets to protect surfaces from scratching and marring. Great for attaching signs to cars or trailers. Reposition as needed quickly and easily - - -
**** PRICE: 5.80 USD
Manufacturer : MASTER MAGNETICS, INC.
SKU: B1798410
UPC: 095421005024
Tags: | Construction. Industrial supply

Start of page
Max-Attach Polymagnet Rare Earth Ring Magnet - 1.00


Max-Attach Polymagnet Rare Earth Ring Magnet - 1.00" O.D. x 0.190" I.D. x 0.12" Thick
Business & Industrial
Global Industrial
Much stronger and safer than traditional magnets: Max-Attach Polymagnets have unique possibilities compared to conventionally magnetized magnets. A particular magnetic function is encoded into the magnet, focusing the magnetic field for better magnet on metal performance. This revolutionary technology can deliver much greater shear strength and holding power than conventional magnets of the same size and grade for outstanding performance in standard applications such as magnetic hooks and hangers, magnetic whiteboards, and magnetic paint or primer. Unmatched Performance on Thin Metal Traditional magnets don't hold very well to thin metal. This is because the magnetic field does not saturate the metal and extends through to the other side, where its magnetic energy is wasted and doesn't contribute to the holding force. The magnetic field on a Max-Attach Polymagnet is focused closer to the face of the magnet and therefore saturates the metal more efficiently, creating stronger holding forces on thin metal. Incredible Shear Strength In magnetic applications, shear strength refers to the amount of weight a magnet can hold when attached to a vertical surface. Max-Attach Polymagnets exhibit 2x to 8x more shear strength than conventional magnets, which just do not hold well on vertical surfaces and slide easily on metal. This is due to the difference in field saturation efficiency between conventional magnets and Polymagnets . Safer Magnets Max-Attach Polymagnets allow for incredible control of the magnetic field and are safer than traditional magnets because they can be encoded only to engage at very close proximity to either metal or other magnets. The "reach-out" of the magnetic field can be varied to suit specific design requirements. - - -
**** PRICE: 45.60 USD
Manufacturer : INDUSTRIAL MAGNETICS, INC
SKU: B2258834
UPC: 682241288005
Tags: | Construction. Industrial supply

Start of page
J.W. Winco 50.3-HF-47-M6 Retaining Magnet Assembly Disc-Shaped w/ Threaded Stud - 1.85


J.W. Winco 50.3-HF-47-M6 Retaining Magnet Assembly Disc-Shaped w/ Threaded Stud - 1.85" Dia, Steel
Business & Industrial
Global Industrial
GN 50.3 magnets are a shielded magnetic assembly. Temperature resistant to 390 F (200 C). - - -
**** PRICE: 11.50 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157432
UPC: 664423484870
Tags: | Construction. Industrial supply

Start of page
J.W. Winco GN 251.6 Setting Bolts, Steel, w/ Retaining Magnet, Zinc Pltd, M6, 3/8


J.W. Winco GN 251.6 Setting Bolts, Steel, w/ Retaining Magnet, Zinc Pltd, M6, 3/8" Mag Dia., 1/2"L
Business & Industrial
Global Industrial
GN 251.6 Setting Bolts are a shielded magnetic assembly. One example use for these setting bolts is as workpiece stop, with the magnet holding the workpiece in place. The included locking nut can be used to secure the setting bolt after positioning - - -
**** PRICE: 7.80 USD
Manufacturer : J.W. WINCO, INC
SKU: B2680053
UPC: 664423408029
Tags: | Construction. Industrial supply

Start of page
J.W. Winco 51.7-ND-43-A Retaining Magnet Assembly w/ Ball Knob w/ Rubber Jacket, 1.69


J.W. Winco 51.7-ND-43-A Retaining Magnet Assembly w/ Ball Knob w/ Rubber Jacket, 1.69" Dia, Steel
Business & Industrial
Global Industrial
GN 51.7 magnets are a shielded magnetic assembly with a rubber jacket. They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force. Temperature resistant to 175 F (80 C). - - -
**** PRICE: 23.75 USD
Manufacturer : J.W. WINCO, INC
SKU: B2157567
UPC: 664423487178
Tags: | Construction. Industrial supply

Start of page
MPI Rare Earth Grate Magnet 316 SS 16


MPI Rare Earth Grate Magnet 316 SS 16" Round
Business & Industrial
Global Industrial
MPI grate magnets are designed to remove medium and small-size ferrous tramp metal contaminants from dry, granular free-flowing product streams in gravity-fed vertical chutes, hoppers, housings, or bins. They are easy to install and clean. Magnetic grates offer efficient, economical magnetic protection of processing equipment, such as milling, extruding, and mixing, while improving product purity. With these types of magnetic separators, the product stream flows through a row of 1" diameter magnetic tubes, located on 2" centers, allowing 1" of space between each tube. The tubes are held in place with a welded stainless-steel support frame. As tramp metal contaminants are captured, they move to the underside of the magnetic tubes, eliminating tramp metal "wash-off". All tubes are fully welded for the highest durability, no crimped or mechanically sealed end plugs. All MPI grate magnets are proudly manufactured in the USA. - - -
**** PRICE: 2201.00 USD
Manufacturer : MAGNETIC PRODUCTS INC
SKU: B3081366
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown


Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 874.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339144
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood


Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 814.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339142
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar


Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 733.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339128
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 7-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar


Prisoner Bench 7-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1145.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339131
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood


Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 892.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339136
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown


Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 940.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339139
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 4-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black


Prisoner Bench 4-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black
Business & Industrial
Global Industrial
Prisoner Bench 4-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3' to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 836.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339124
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood


Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 733.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339140
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 3-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black


Prisoner Bench 3-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black
Business & Industrial
Global Industrial
Prisoner Bench 3-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3' to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 718.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339125
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood


Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 796.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339138
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar


Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 780.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339127
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown


Prisoner Bench 3-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 814.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339143
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood


Prisoner Bench 4-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1007.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339141
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood


Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, With Backrest - Redwood
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 874.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339137
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 5-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black


Prisoner Bench 5-ft. Solid Steel Seating with Steel Frame, Without Backrest - Black
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3' to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 937.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339123
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 7-ft.ADA Composite Lumber Seating With Backrest - Putty


Prisoner Bench 7-ft.ADA Composite Lumber Seating With Backrest - Putty
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1683.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339132
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 6-ft.ADA Composite Lumber Seating With Backrest - Putty


Prisoner Bench 6-ft.ADA Composite Lumber Seating With Backrest - Putty
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1526.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339135
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar


Prisoner Bench 5-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 892.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339126
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 6-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown


Prisoner Bench 6-ft.Composite Lumber Seating with Steel Frame, With Backrest - Chocolate Brown
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1417.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339134
UPC:
Tags: | Construction. Industrial supply

Start of page
Prisoner Bench 6-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar


Prisoner Bench 6-ft.Composite Lumber Seating with Steel Frame, Without Backrest - Cedar
Business & Industrial
Global Industrial
Bench seating is made using solid steel or plastic composite lumber slats. Each bench frame is constructed of solid steel and comes standard with a solid steel 3/4" handcuff rail as well as additional areas for ankle shackles. Benches are made to order and are available in lengths from 3-ft.to 8'. ADA compliant sizes available. With or without backrest. Plastic composite seating is available in 7 different colors. Solid steel seating is available in powder coated gray or black. Features: Comes with one pair of handcuffs.Securely bolts to the floor with provided hardware. All-welded powder coated black steel frame.Easy to clean.Easy to assemble.Made in the USA. Wooden floors require 3" lag bolts. Not included. - - -
**** PRICE: 1024.00 USD
Manufacturer : PRISONER BENCH LLC
SKU: B2339133
UPC:
Tags: | Construction. Industrial supply

Start of page
SKB Audio/Video Shelf for R1406 & GigSafe 1SKB-AV14 16-1/2


SKB Audio/Video Shelf for R1406 & GigSafe 1SKB-AV14 16-1/2"L x 16-1/2"W
Business & Industrial
Global Industrial
The SKB-AV14 Audio Video Shelf features a 16.5" x 16" shelf on a hinged anodized steel bracket that attaches to the top two units of the SKB19-R1406 Mighty GigRig or the SKB19-R1400 Gig Safe. With a convenient hook and loop surface the hinged SKB-AV14 can remain intact, even with the lid on the SKB-AV14 Shelf Accessory is the perfect solution for securely transporting mobile rackmounted audio video equipment, laptop, light or a workspace at a convenient height. Shelf remains attached with cover on. Sturdy hook and loop surface for AV gear. Convenient workspace at a convenient height Special Note: Mounts to top 2U of the SKB19-R1406 GigRig or the SKB19-R1400 Gig Safe. - - -
**** PRICE: 165.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846254
UPC: 789270001411
Tags: | Construction. Industrial supply

Start of page
Foam Inserts (3 part) for Nanuk 915 Case


Foam Inserts (3 part) for Nanuk 915 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 915 Dry Boxes. - - -
**** PRICE: 20.75 USD
Manufacturer : PLASTICASE INC.
SKU: B892375
UPC: 666365001375
Tags: | Construction. Industrial supply

Start of page
Nanuk 950-DIVI Padded Divider for Nanuk 950 Case


Nanuk 950-DIVI Padded Divider for Nanuk 950 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 950 Cases. - - -
**** PRICE: 394.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810901
UPC: 666365012326
Tags: | Construction. Industrial supply

Start of page
Padded Divider for Nanuk 930 Case


Padded Divider for Nanuk 930 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 930 Cases. - - -
**** PRICE: 139.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892359
UPC: 666365003409
Tags: | Construction. Industrial supply

Start of page
SKB Hook & Loop Fastener Shelf 1SKB-VS-1, 14-1/2


SKB Hook & Loop Fastener Shelf 1SKB-VS-1, 14-1/2"L x 14-1/2"W
Business & Industrial
Global Industrial
Be creative with this rackmount pull-out shelf. Cushioned heavy-duty Hook and Loop Fastener surface will hold hundreds of different gizmos and gadgets. - - -
**** PRICE: 164.95 USD
Manufacturer : SKB CORPORATION
SKU: B1845995
UPC: 789270920002
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Top) for Nanuk 950 Case - Lexan


Waterproof Panel Kit (Top) for Nanuk 950 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (top) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 950 Cases. - - -
**** PRICE: 82.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810922
UPC: 666365012388
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Top) for Nanuk 935 Case - Aluminum


Bezel Kit (Top) for Nanuk 935 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the upper portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 935 Cases. - - -
**** PRICE: 76.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810886
UPC: 666365011213
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit for Nanuk 903 Case - Lexan


Waterproof Panel Kit for Nanuk 903 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 903 Cases. - - -
**** PRICE: 27.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810931
UPC: 666365009340
Tags: | Construction. Industrial supply

Start of page
Elephant Elite Neck Or Shoulder Strap For Cases - ELNS-1


Elephant Elite Neck Or Shoulder Strap For Cases - ELNS-1
Business & Industrial
Global Industrial
Elephant Elite Case heavy duty nylon Shoulder Strap to fit cases EL1606, EL1606P, EL1606T, EL1907, EL1907P, EL1907T and EL1907TW. - - -
**** PRICE: 14.75 USD
Manufacturer : ELEPHANT CASES LLC
SKU: B2146179
UPC: 743724553222
Tags: | Construction. Industrial supply

Start of page
Shoulder Strap for Nanuk 900 Cases


Shoulder Strap for Nanuk 900 Cases
Business & Industrial
Global Industrial
The NANUK 900-STRAP Shoulder Strap is made of neoprene and attaches to all NANUK cases without modifying the case. Reduce fatigue, adds comfort when transporting your case. - - -
**** PRICE: 30.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892356
UPC: 666365000026
Tags: | Construction. Industrial supply

Start of page
SKB 3i Series Panel Mount Clip Kit 3i-PMCK Military, Utility, 1


SKB 3i Series Panel Mount Clip Kit 3i-PMCK Military, Utility, 1"L x 0-1/2"W
Business & Industrial
Global Industrial
SKB's new 3i-PMCK Panel Mount Clip Kit is now available and will accommodate any size 3i Series case. The 3i-PMCK Panel Mount Clip Kit will secure a mounting panel of your choice for a convenient and finished appearance. The 3i-PMCK kit is complete with 8 panel mounts that have pressed in brass inserts, O-ring seals, mounting screws, a drill guide and even the necessary drill bit for a quick and easy installation. - - -
**** PRICE: 28.95 USD
Manufacturer : SKB CORPORATION
SKU: B1845925
UPC: 789270992337
Tags: | Construction. Industrial supply

Start of page
Nanuk 910-FOAM Foam Inserts (3 part) for Nanuk 910 Case


Nanuk 910-FOAM Foam Inserts (3 part) for Nanuk 910 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 910 Dry Boxes. - - -
**** PRICE: 15.75 USD
Manufacturer : PLASTICASE INC.
SKU: B1810889
UPC: 666365010407
Tags: | Construction. Industrial supply

Start of page
SKB Shipping Label Plate 3SKB-SLP Shipping, Utility


SKB Shipping Label Plate 3SKB-SLP Shipping, Utility
Business & Industrial
Global Industrial
The aluminum shipping label plate can be added to the exterior of Shock Racks, 3R Series and the 3i Series cases to adhere shipping labels or marking of products for inventory. The label measures 12" x 7" and can be mounted to any product for secure labeling. The installation kit is complete with stainless steel mounting screws, rubber backed sealing washers and nylock nuts to maintain the watertight seal of the cases. Fits the SKB R Series and iSeries cases and Shock Racks. Stainless Steel Mounting. Includes screws, rubber backed sealing washers and nylock nuts. - - -
**** PRICE: 38.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846028
UPC: 789270993129
Tags: | Construction. Industrial supply

Start of page
SKB Rack Mount Hardware 1SKB19-AC1 4


SKB Rack Mount Hardware 1SKB19-AC1 4"L x 4"W
Business & Industrial
Global Industrial
Nuts and bolts kit. Mounting hardware in the racks is easy with the SKB rack rail and provided hardware. Includes 12 each, both screws and clips. - - -
**** PRICE: 28.95 USD
Manufacturer : SKB CORPORATION
SKU: B1845911
UPC: 789270001916
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Top) for Nanuk 910 Case - Aluminum


Bezel Kit (Top) for Nanuk 910 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the upper portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 910 Cases. - - -
**** PRICE: 60.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810919
UPC: 666365010391
Tags: | Construction. Industrial supply

Start of page
Bezel Kit for Nanuk 940 Case - Aluminum


Bezel Kit for Nanuk 940 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 940 Cases. - - -
**** PRICE: 82.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892387
UPC: 666365008534
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit for Nanuk 904 Case - Lexan


Waterproof Panel Kit for Nanuk 904 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 904 Cases. - - -
**** PRICE: 33.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810953
UPC: 666365009371
Tags: | Construction. Industrial supply

Start of page
SKB 3R series Wheel Kit 3R-WK12 Military, Utility, Shipping, 4


SKB 3R series Wheel Kit 3R-WK12 Military, Utility, Shipping, 4"L x 3-1/2"W
Business & Industrial
Global Industrial
Edge wheel installation kit for 3R Series cases. Compatible with: 3R2216-15B-E, 3R2222-20B-C, 3R2222-20B-E, 3R2424-24B-E, 3R2424-24B-L, 3R2727-18B-E, 3R2727-18B-L, 3R2727-27B-E, 3R2727-27B-L, 3R3517-14B-E, 3R4024-18B-E, 3R4024-18B-L, 3R4024-24B-E, 3R4024-24B-L, 3R4530-24B-E, 3R4530-24B-L, 3R4909-5B-E, 3R5030-24B-E, 3R5030-24B-L - - -
**** PRICE: 140.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846045
UPC: 789270994942
Tags: | Construction. Industrial supply

Start of page
Foam Inserts (3 part) for Nanuk 920 Case


Foam Inserts (3 part) for Nanuk 920 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 920 Dry Boxes. - - -
**** PRICE: 41.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892355
UPC: 666365002051
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Bottom) for Nanuk 950 Case - Aluminum


Bezel Kit (Bottom) for Nanuk 950 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 950 Cases. - - -
**** PRICE: 96.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810891
UPC: 666365012432
Tags: | Construction. Industrial supply

Start of page
Foam Inserts (3 part) for Nanuk 940 Case


Foam Inserts (3 part) for Nanuk 940 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 940 Dry Boxes. - - -
**** PRICE: 63.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892309
UPC: 666365004109
Tags: | Construction. Industrial supply

Start of page
Nanuk Padded Dividers for 933 Nanuk Case 933-DIVI


Nanuk Padded Dividers for 933 Nanuk Case 933-DIVI
Business & Industrial
Global Industrial
If you require compartmentalized protective organization of your components or equipment, our padded dividers are the right choice. Easily tailored to your needs with repositionable hook and loop fasteners, our padded dividers are designed to easily organize and protect your equipment. - - -
**** PRICE: 150.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221092
UPC: 666365016294
Tags: | Construction. Industrial supply

Start of page
Padded Divider for Nanuk 940 Case


Padded Divider for Nanuk 940 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 940 Cases. - - -
**** PRICE: 180.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892394
UPC: 666365004093
Tags: | Construction. Industrial supply

Start of page
SKB Small Accessory Pocket 3SKB-BB60 20


SKB Small Accessory Pocket 3SKB-BB60 20"L x 10"W
Business & Industrial
Global Industrial
Accessory pocket that measures 20" x 10" x 3" with hardware to attach to the inside of SKB Shockrack lids. - - -
**** PRICE: 87.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846123
UPC: 789270991163
Tags: | Construction. Industrial supply

Start of page
Bezel Kit for Nanuk 903 Case - Aluminum


Bezel Kit for Nanuk 903 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 903 Cases. - - -
**** PRICE: 37.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810932
UPC: 666365009326
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Top) for Nanuk 960 Case - Aluminum


Bezel Kit (Top) for Nanuk 960 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the upper portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 960 Cases. - - -
**** PRICE: 102.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810913
UPC: 666365012609
Tags: | Construction. Industrial supply

Start of page
Foam Inserts (3 part) for Nanuk 905 Case


Foam Inserts (3 part) for Nanuk 905 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 905 Dry Boxes. - - -
**** PRICE: 15.75 USD
Manufacturer : PLASTICASE INC.
SKU: B892343
UPC: 666365000699
Tags: | Construction. Industrial supply

Start of page
Nanuk Customized Foam Insert (925 Case) for 4 Pistol Cap 925-FOAM_4UP


Nanuk Customized Foam Insert (925 Case) for 4 Pistol Cap 925-FOAM_4UP
Business & Industrial
Global Industrial
Custom Foam for 4UP Pistols that fits the 925 Nanuk Case - - -
**** PRICE: 90.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221122
UPC: 666365017802
Tags: | Construction. Industrial supply

Start of page
Nanuk Customized Foam Insert (990 Case) for AR 990-FOAM_AR


Nanuk Customized Foam Insert (990 Case) for AR 990-FOAM_AR
Business & Industrial
Global Industrial
Custom Foam for AR and Pistol that fits the 990 Nanuk Case - - -
**** PRICE: 146.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221099
UPC: 666365017833
Tags: | Construction. Industrial supply

Start of page
Nanuk Foam Inserts (3 Part) for 918 Nanuk Case 918-FOAM


Nanuk Foam Inserts (3 Part) for 918 Nanuk Case 918-FOAM
Business & Industrial
Global Industrial
Made of high quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items. - - -
**** PRICE: 134.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221124
UPC: 666365016881
Tags: | Construction. Industrial supply

Start of page
Padded Divider for Nanuk 915 Case


Padded Divider for Nanuk 915 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 915 Cases. - - -
**** PRICE: 67.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892411
UPC: 666365001368
Tags: | Construction. Industrial supply

Start of page
Nanuk 935-DIVI Padded Divider for Nanuk 935 Case


Nanuk 935-DIVI Padded Divider for Nanuk 935 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 935 Cases. - - -
**** PRICE: 334.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810954
UPC: 666365011169
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Bottom) for Nanuk 910 Case - Aluminum


Bezel Kit (Bottom) for Nanuk 910 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 910 Cases. - - -
**** PRICE: 57.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810911
UPC: 666365010384
Tags: | Construction. Industrial supply

Start of page
SKB 30


SKB 30" Support Rails 3SKB-SR30 29-1/2"L x 2"W
Business & Industrial
Global Industrial
Support Rails that are made of zinc plated steel to support additional weight for 30" Shock Racks only. - - -
**** PRICE: 140.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846181
UPC: 789270991149
Tags: | Construction. Industrial supply

Start of page
Nanuk Padded Dividers for 923 Nanuk Case 923-DIVI


Nanuk Padded Dividers for 923 Nanuk Case 923-DIVI
Business & Industrial
Global Industrial
If you require compartmentalized protective organization of your components or equipment, our padded dividers are the right choice. Easily tailored to your needs with repositionable hook and loop fasteners, our padded dividers are designed to easily organize and protect your equipment. - - -
**** PRICE: 97.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221144
UPC: 666365018298
Tags: | Construction. Industrial supply

Start of page
Bezel Kit (Bottom) for Nanuk 935 Case - Aluminum


Bezel Kit (Bottom) for Nanuk 935 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 935 Cases. - - -
**** PRICE: 76.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810964
UPC: 666365011206
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit for Nanuk 915 Case - Lexan


Waterproof Panel Kit for Nanuk 915 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 915 Cases. - - -
**** PRICE: 42.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892357
UPC: 666365008282
Tags: | Construction. Industrial supply

Start of page
Nanuk 935-FOAM Foam Inserts (3 part) for Nanuk 935 Case


Nanuk 935-FOAM Foam Inserts (3 part) for Nanuk 935 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 935 Dry Boxes. - - -
**** PRICE: 334.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810961
UPC: 666365011176
Tags: | Construction. Industrial supply

Start of page
Padded Divider for Nanuk 925 Case


Padded Divider for Nanuk 925 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 925 Cases. - - -
**** PRICE: 100.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892319
UPC: 666365002723
Tags: | Construction. Industrial supply

Start of page
Nanuk Foam Inserts (3 Part) for 933 Nanuk Case 933-FOAM


Nanuk Foam Inserts (3 Part) for 933 Nanuk Case 933-FOAM
Business & Industrial
Global Industrial
Made of high quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items. - - -
**** PRICE: 76.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221088
UPC: 666365011176
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Bottom) for Nanuk 950 Case - Lexan


Waterproof Panel Kit (Bottom) for Nanuk 950 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (bottom) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 950 Cases. - - -
**** PRICE: 82.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810921
UPC: 666365012371
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Bottom) for Nanuk 935 Case - Lexan


Waterproof Panel Kit (Bottom) for Nanuk 935 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (bottom) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 935 Cases. - - -
**** PRICE: 61.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810962
UPC: 666365011183
Tags: | Construction. Industrial supply

Start of page
Bezel Kit for Nanuk 904 Case - Aluminum


Bezel Kit for Nanuk 904 Case - Aluminum
Business & Industrial
Global Industrial
All Nanuk instrument cases come standard with an integrated bezel system. This detail on the lower portion of the case image allows a panel kit to be easily installed without having to install a secondary bracket or drill holes on the side of the case. Aluminum panel with mounting screws and an adhesive backed die-cut waterproofing gasket. Fits Nanuk 904 Cases. - - -
**** PRICE: 46.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810896
UPC: 666365009357
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Top) for Nanuk 935 Case - Lexan


Waterproof Panel Kit (Top) for Nanuk 935 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (top) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 935 Cases. - - -
**** PRICE: 63.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810963
UPC: 666365011190
Tags: | Construction. Industrial supply

Start of page
Nanuk Padded Dividers for 918 Nanuk Case 918-DIVI


Nanuk Padded Dividers for 918 Nanuk Case 918-DIVI
Business & Industrial
Global Industrial
If you require compartmentalized protective organization of your components or equipment, our padded dividers are the right choice. Easily tailored to your needs with repositionable hook and loop fasteners, our padded dividers are designed to easily organize and protect your equipment. - - -
**** PRICE: 109.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221125
UPC: 666365016287
Tags: | Construction. Industrial supply

Start of page
SKB 20


SKB 20" Support Rails 3SKB-SR20 19-1/2"L x 2"W
Business & Industrial
Global Industrial
Support Rails that are made of zinc plated steel to support additional weight for 20" Shock Racks only. - - -
**** PRICE: 135.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846183
UPC: 789270991118
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Bottom) for Nanuk 960 Case - Lexan


Waterproof Panel Kit (Bottom) for Nanuk 960 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (bottom) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 960 Cases. - - -
**** PRICE: 96.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810923
UPC: 666365012661
Tags: | Construction. Industrial supply

Start of page
Padded Divider for Nanuk 945 Case


Padded Divider for Nanuk 945 Case
Business & Industrial
Global Industrial
The padded dividers are designed to easily organize and protect your equipment. Easily tailored to your needs with repositionable hook and loop fasteners. This Nanuk padded dividers fits Nanuk 945 Cases. - - -
**** PRICE: 172.95 USD
Manufacturer : PLASTICASE INC.
SKU: B892395
UPC: 666365004772
Tags: | Construction. Industrial supply

Start of page
SKB Medium Locking Latch Kit 3i-TSA-2 Military, Utility, 3-3/4


SKB Medium Locking Latch Kit 3i-TSA-2 Military, Utility, 3-3/4"L x 1-3/4"W
Business & Industrial
Global Industrial
Replacing your SKB trigger latches with TSA locking trigger latches is quick and easy with the 3i-TSA-2 Locking Latch Kit. Each kit includes 2 TSA locking latches, replacement pins and 2 keys that are quick and easy to install. The 3i-TSA Locking Latch Kit will accommodate these 3i Series cases; 3i-1209-4B, 3i-1711-6B. 3i-1813-5B - - -
**** PRICE: 38.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846070
UPC: 789270991750
Tags: | Construction. Industrial supply

Start of page
Nanuk Foam Inserts (3 Part) for 923 Nanuk Case 923-FOAM


Nanuk Foam Inserts (3 Part) for 923 Nanuk Case 923-FOAM
Business & Industrial
Global Industrial
Made of high quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items. - - -
**** PRICE: 27.95 USD
Manufacturer : PLASTICASE INC.
SKU: B2221143
UPC: 666365017666
Tags: | Construction. Industrial supply

Start of page
Nanuk 960-FOAM Foam Inserts (3 part) for Nanuk 960 Case


Nanuk 960-FOAM Foam Inserts (3 part) for Nanuk 960 Case
Business & Industrial
Global Industrial
Made of high-quality polyurethane foam the multi-layered set of foam inserts includes a pre-scored removable layer with foam squares that can be removed in any configuration to accommodate the case contents while the lid of the case features a convoluted foam pad. This Nanuk Protection Case Accessory fits Nanuk 960 Dry Boxes. - - -
**** PRICE: 89.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810915
UPC: 666365012654
Tags: | Construction. Industrial supply

Start of page
Waterproof Panel Kit (Top) for Nanuk 960 Case - Lexan


Waterproof Panel Kit (Top) for Nanuk 960 Case - Lexan
Business & Industrial
Global Industrial
Included in Nanuk waterproof panel kit (top) is a contoured 3/16" thick polycarbonate panel with mounting screws and an adhesive backed die-cut waterproofing gasket. The Lexan panel can easily be modified using a standard drill and keyhole or electric jigsaw to accommodate your equipment. Fits Nanuk 960 Cases. - - -
**** PRICE: 89.95 USD
Manufacturer : PLASTICASE INC.
SKU: B1810924
UPC: 666365012678
Tags: | Construction. Industrial supply

Start of page
SKB Stationary Touch Fastener Shelf 1SKB-VS-2 Rackmount, 19-5/16


SKB Stationary Touch Fastener Shelf 1SKB-VS-2 Rackmount, 19-5/16"L x 13-3/4"W
Business & Industrial
Global Industrial
SKB Stationary Touch Fastener Shelf 1SKB-VS-2 Rackmount, 19-5/16"L x 13-3/4"W The 1SKB-VS-2 is an 8U shelf designed to be used with any of our top slant rack mixer cases such as the 1SKB-R102, 1SKB-R104, 1SKB-R106 or Gig Rig products such as the 1SKB19-R1208. The VS-2 shelf has a hook and loop covering to secure any products that can't be rack mounted. The covering is on both sides so the shelf which provides two different mounting options. The shelf can be recessed below the rack rails for small mixers or DJ equipment or above the rack rails for the perfect solution for a laptop or video projector. Special Note: Usable space is 17.375"x12.5". - - -
**** PRICE: 57.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846109
UPC: 789270993464
Tags: | Construction. Industrial supply

Start of page
SKB Caster Accessory Bag 12


SKB Caster Accessory Bag 12"L x 9-1/2"W
Business & Industrial
Global Industrial
Accessory bag with compartments that measures 12" x 9.5" x 3.5" with mounting hardware for storing casters for SKB Shockracks. - - -
**** PRICE: 95.95 USD
Manufacturer : SKB CORPORATION
SKU: B1846125
UPC: 789270991187
Tags: | Construction. Industrial supply

Start of page

 

 

www.sapiensman.com/ESDictionary - Technical English - Spanish Vocabulary


www.azx7.com