Online Shopping

www.sapiensman.com


Search :

HOME : Shopping

 

Tools & Equipment Search  

small banner

<< Previous Catalog - Home - Next Catalog >> 



#16 << Previous Page - Page #1 - Next Page >> #2


PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 -
Premium Molded Heater Hose - Gates 19616


Premium Molded Heater Hose - Gates 19616
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1987 Chevrolet, Caprice, V-8 5.0 L, Heater To W.P. - - -
**** PRICE: 25.95 USD
Manufacturer : Gates
SKU: B2446106
UPC: 0072053178487
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 56212


Discharge & Suction Line Hose Assembly - Four Seasons 56212
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chevy Corvette (13-09) - - -
**** PRICE: 73.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458941
UPC: 0096361562127
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87959


Molded Heater Hose, Dayco 87959
Business & Industrial
Global Industrial
Molded Heater HoseThis Dayco Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a ''quick connect'' end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. - - -
**** PRICE: 43.95 USD
Manufacturer : Dayco
SKU: B2814810
UPC: 0036687889225
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 55862


Discharge & Suction Line Hose Assembly - Four Seasons 55862
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chevy S10 Pickup (93-92) >> GMC S15 Pickup (93-92) - - -
**** PRICE: 72.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458916
UPC: 0096361558625
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18957


Premium Molded Heater Hose - Gates 18957
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1997-1992 Isuzu, Trooper, V-6 3.2 L, Heater To Pipe-1 - - -
**** PRICE: 19.75 USD
Manufacturer : Gates
SKU: B2437095
UPC: 0072053411362
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87730


Molded Heater Hose, Dayco 87730
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 15.50 USD
Manufacturer : Dayco
SKU: B2814632
UPC: 0038244669745
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55243


Discharge Line Hose Assembly - Four Seasons 55243
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chrysler 200 Series (14-12) >> Dodge Avenger (14-12) - - -
**** PRICE: 104.95 USD
Manufacturer : FOUR SEASONS
SKU: B2460040
UPC: 0096361552432
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose Assembly - Gates HHA106


Premium Molded Heater Hose Assembly - Gates HHA106
Business & Industrial
Global Industrial
Premium Molded Heater Hose Assembly Gates Heater Hose Assemblies Features: Pipe welds are superior to the OE equivalentAre designed and constructed for durability in tough weather conditionsWeighs less than the OE equivalentAll-inclusive assembly reduces labor time and the hassle of ordering several different parts. Application Summary: 2000-1997 Dodge, Grand Caravan, V-6 3.3 L, Aux. Heater Inlet & Outlet - - -
**** PRICE: 133.95 USD
Manufacturer : Gates
SKU: B2443689
UPC: 0770075554035
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 55076


Discharge & Suction Line Hose Assembly - Four Seasons 55076
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Buick Century Sedan / Coupe (91-87); Estate Wagon (89-87) >> Chevy Celebrity (90-87) >> Olds Ciera / Cutlass Ciera (91-87); Olds (91-87) >> Pontiac 6000 (91-87) - - -
**** PRICE: 89.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459619
UPC: 0096361550766
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 66497


Discharge Line Hose Assembly - Four Seasons 66497
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Hyundai Elantra (18-17) - - -
**** PRICE: 41.95 USD
Manufacturer : FOUR SEASONS
SKU: B2465568
UPC:
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18413


Premium Molded Heater Hose - Gates 18413
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1990-1987 Jeep, Cherokee, 6-Cyl. 4.0 L, Tee To W.P. - - -
**** PRICE: 13.50 USD
Manufacturer : Gates
SKU: B2446175
UPC: 0072053191134
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 55863


Discharge & Suction Line Hose Assembly - Four Seasons 55863
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chevy S10 Blazer (93-92); S10 Pickup (93-92) >> GMC S15 Jimmy (93-92); S15 Pickup (93-92) >> Olds Bravada (93-92) - - -
**** PRICE: 77.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459211
UPC: 0096361558632
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19276


Premium Molded Heater Hose - Gates 19276
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2003-00 Ford, Focus, 4-Cyl. 2.0 L, Pipe-1 To Thermostat - - -
**** PRICE: 14.50 USD
Manufacturer : Gates
SKU: B2438998
UPC: 0072053549607
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Liquid Hose, Global Parts 4811398


A/C Refrigerant Liquid Hose, Global Parts 4811398
Business & Industrial
Global Industrial
A/C Refrigerant Liquid HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 26.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737037
UPC: 844434027222
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18046


Premium Molded Heater Hose - Gates 18046
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2013-09 Acura, MDX, V-6 3.7 L, Inlet Tee To Heater Inlet - - -
**** PRICE: 9.00 USD
Manufacturer : Gates
SKU: B2437190
UPC: 0770075507765
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 86834


Molded Heater Hose, Dayco 86834
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 7.60 USD
Manufacturer : Dayco
SKU: B2817445
UPC: 0036687908124
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18257


Premium Molded Heater Hose - Gates 18257
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1998-1996 Subaru, Legacy, 4-Cyl. 2.5 L, Throttle Body To Valve - - -
**** PRICE: 12.75 USD
Manufacturer : Gates
SKU: B2439209
UPC: 0072053472462
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4811892


A/C Refrigerant Discharge Hose, Global Parts 4811892
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 33.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737449
UPC: 844434095917
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Suction Hose, Global Parts 4813055


A/C Refrigerant Suction Hose, Global Parts 4813055
Business & Industrial
Global Industrial
A/C Refrigerant Suction HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 48.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2735882
UPC: 886429143845
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Liquid Hose, Global Parts 4812456


A/C Refrigerant Liquid Hose, Global Parts 4812456
Business & Industrial
Global Industrial
A/C Refrigerant Liquid HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 27.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2736980
UPC: 886429091863
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18534


Premium Molded Heater Hose - Gates 18534
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2012-09 Ford, Escape, V-6 3.0 L, Reservoir To Upper Rad. - - -
**** PRICE: 27.95 USD
Manufacturer : Gates
SKU: B2437168
UPC: 0770075553649
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 12021


Premium Molded Heater Hose - Gates 12021
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1993-1991 BMW, 325I, 6-Cyl. 2.5 L, Throttle Body To Eng. - - -
**** PRICE: 12.75 USD
Manufacturer : Gates
SKU: B2438956
UPC: 0770075573470
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87895


Molded Heater Hose, Dayco 87895
Business & Industrial
Global Industrial
Molded Heater HoseThis Dayco Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat. - - -
**** PRICE: 34.95 USD
Manufacturer : Dayco
SKU: B2814720
UPC: 0036687696830
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 66558


Suction Line Hose Assembly - Four Seasons 66558
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Escape (19-17) >> Lincoln MKC (19-17) - - -
**** PRICE: 30.95 USD
Manufacturer : FOUR SEASONS
SKU: B2456351
UPC: 0096361144224
Tags: | Construction. Industrial supply

Start of page
Charter Economy Straight Heater Hose - Gates 28404


Charter Economy Straight Heater Hose - Gates 28404
Business & Industrial
Global Industrial
Charter Economy Straight Heater Hose Economically priced heater hose, yet affords long service life. Tested by Gates to assure reliability.Good resistance to high temperatures.Moderate resistance to oil and grease contamination.Good resistance to non-oil based coolant additives.Similar to SAE 20R3 Class D-2.Temperature Rating: 40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C).Caution: Do not use for fuel or oil transfer applications. - - -
**** PRICE: 292.95 USD
Manufacturer : Gates
SKU: B2441722
UPC: 0072053133196
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18247


Premium Molded Heater Hose - Gates 18247
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2010-07 Pontiac, G6, V-6 3.5 L, Reservoir To Pipe-5 - - -
**** PRICE: 11.00 USD
Manufacturer : Gates
SKU: B2439011
UPC: 0072053454741
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4811291


A/C Refrigerant Discharge Hose, Global Parts 4811291
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 33.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2736850
UPC: 844434026157
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 55914


Suction Line Hose Assembly - Four Seasons 55914
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: BMW 318 Series (85-84); 325 Series (92-84); M Series (91-88) - - -
**** PRICE: 59.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459686
UPC: 0096361559141
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 66264


Discharge Line Hose Assembly - Four Seasons 66264
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Hyundai Accent (14-12); Veloster (14-12) - - -
**** PRICE: 27.95 USD
Manufacturer : FOUR SEASONS
SKU: B2456129
UPC: 0096361141575
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 88468


Molded Heater Hose, Dayco 88468
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat. - - -
**** PRICE: 22.75 USD
Manufacturer : Dayco
SKU: B2815021
UPC: 0036687886491
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 55442


Suction Line Hose Assembly - Four Seasons 55442
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Audi A4 Series (01-96) >> VW Passat/CC (01-98) - - -
**** PRICE: 80.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459219
UPC: 0096361554429
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18343


Premium Molded Heater Hose - Gates 18343
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2018-14 Chevrolet, Impala, V-6 3.6 L, Reservoir To Eng. - - -
**** PRICE: 21.00 USD
Manufacturer : Gates
SKU: B2440399
UPC: 0770075545033
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19002


Premium Molded Heater Hose - Gates 19002
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2001-1994 Honda, Prelude, 4-Cyl. 2.2 L, Heater To Valve-1 - - -
**** PRICE: 20.50 USD
Manufacturer : Gates
SKU: B2439207
UPC: 0072053411805
Tags: | Construction. Industrial supply

Start of page
3/16 In. Elbow, Dayco 80623


3/16 In. Elbow, Dayco 80623
Business & Industrial
Global Industrial
3/16 In. ElbowDesigned for use with all traditional fuel and coolant hose applications, these Dayco glass-filled nylon, straight, ''Y'', elbow, tee and reducing connectors produce a leak proof splice between vacuum line tubing, fuel line hose, coolant hose, or other small I.D. hoses. Ideally suited for all jobs requiring 3/32", through 3/4" I.D. connections. A molded circumferential flange provides a hose stop that assures that the hose is inserted to the proper depth. The connectors are packaged and sold in poly bags, one per package. - - -
**** PRICE: 4.00 USD
Manufacturer : Dayco
SKU: B2814946
UPC: 0036687163257
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Hose, Global Parts 4811309


A/C Refrigerant Hose, Global Parts 4811309
Business & Industrial
Global Industrial
A/C Refrigerant HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 50.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2734752
UPC: 844434026331
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 56329


Suction Line Hose Assembly - Four Seasons 56329
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Toyota Camry (05-02); Solara (08-99) - - -
**** PRICE: 67.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459854
UPC: 0096361563292
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18044


Premium Molded Heater Hose - Gates 18044
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2015-09 Honda, Pilot, V-6 3.5 L, Heater To Tee - Inlet - - -
**** PRICE: 6.60 USD
Manufacturer : Gates
SKU: B2439061
UPC: 0770075507741
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 86109


Molded Heater Hose, Dayco 86109
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 13.50 USD
Manufacturer : Dayco
SKU: B2814881
UPC: 0038244244119
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19600


Premium Molded Heater Hose - Gates 19600
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1986-1983 Ford, Mustang, V-6 3.8 L, Heater To Valve - - -
**** PRICE: 13.50 USD
Manufacturer : Gates
SKU: B2436416
UPC: 0072053178326
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4812940


A/C Refrigerant Discharge Hose, Global Parts 4812940
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 38.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737099
UPC: 886429141377
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Hose, Global Parts 4811510


A/C Refrigerant Hose, Global Parts 4811510
Business & Industrial
Global Industrial
A/C Refrigerant HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 85.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2734829
UPC: 844434028342
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 56572


Discharge Line Hose Assembly - Four Seasons 56572
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Probe (92-90) - - -
**** PRICE: 47.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457696
UPC: 0096361565722
Tags: | Construction. Industrial supply

Start of page
Liquid Line Hose Assembly w/o Orifice Tube - Four Seasons 66348


Liquid Line Hose Assembly w/o Orifice Tube - Four Seasons 66348
Business & Industrial
Global Industrial
Liquid Line Hose Assembly w/o Orifice Tube All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Land Rover LR4 (13-10); Range Rover (13-10) - - -
**** PRICE: 46.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457817
UPC: 0096361116764
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4812252


A/C Refrigerant Discharge Hose, Global Parts 4812252
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 26.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737554
UPC: 886429079526
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4811994


A/C Refrigerant Discharge Hose, Global Parts 4811994
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 24.50 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737442
UPC: 886429027244
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 56417


Discharge & Suction Line Hose Assembly - Four Seasons 56417
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chevy Fullsize Pickup (02) >> GMC Fullsize Pickup (02) - - -
**** PRICE: 136.95 USD
Manufacturer : FOUR SEASONS
SKU: B2461042
UPC: 0096361564176
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19638


Premium Molded Heater Hose - Gates 19638
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1988-1986 Oldsmobile, Delta 88, V-6 3.8 L, Heater To Pipe-2 - - -
**** PRICE: 16.00 USD
Manufacturer : Gates
SKU: B2440492
UPC: 0072053178708
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Liquid Hose, Global Parts 4812430


A/C Refrigerant Liquid Hose, Global Parts 4812430
Business & Industrial
Global Industrial
A/C Refrigerant Liquid HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 17.75 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737218
UPC: 886429084643
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87633


Molded Heater Hose, Dayco 87633
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 13.25 USD
Manufacturer : Dayco
SKU: B2814621
UPC: 0038244598199
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Suction Hose, Global Parts 4812123


A/C Refrigerant Suction Hose, Global Parts 4812123
Business & Industrial
Global Industrial
A/C Refrigerant Suction HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 34.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2735681
UPC: 886429059399
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55984


Discharge Line Hose Assembly - Four Seasons 55984
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Toyota 4Runner (94-92); Pickup - Standard (95-93) - - -
**** PRICE: 70.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458564
UPC: 0096361559844
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 56323


Discharge Line Hose Assembly - Four Seasons 56323
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Lexus ES300 (03-02) >> Toyota Camry (05-02) - - -
**** PRICE: 57.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458242
UPC: 0096361563230
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4811294


A/C Refrigerant Discharge Hose, Global Parts 4811294
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 57.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2736852
UPC: 844434026188
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 66098


Suction Line Hose Assembly - Four Seasons 66098
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Escape (07-05) >> Mercury Mariner (07-05) - - -
**** PRICE: 58.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459841
UPC: 0096361087255
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19800


Premium Molded Heater Hose - Gates 19800
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2002-00 Ford, Taurus, V-6 3.0 L, Pipe-1 To W.P. - - -
**** PRICE: 19.00 USD
Manufacturer : Gates
SKU: B2436419
UPC: 0072053549645
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55304


Discharge Line Hose Assembly - Four Seasons 55304
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Thunderbird (93-91) >> Mercury Cougar (93-91) - - -
**** PRICE: 77.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458616
UPC: 0096361553040
Tags: | Construction. Industrial supply

Start of page
AeroQuip Bulk Hose - Four Seasons 56988 - Pkg Qty 50


AeroQuip Bulk Hose - Four Seasons 56988 - Pkg Qty 50
Business & Industrial
Global Industrial
AeroQuip Bulk Hose 50 feet in lengthFits Aeroquip EZ Clip fittings-exceeds SAE J2064Heavy duty kink resistantOriginal equipment on many HD Truck and Off Road vehicles Application Summary: Universal Product is priced per foot and sold as a 50 foot bulk roll. - Pkg Qty 50 - - -
**** PRICE: 15897.50 USD
Manufacturer : FOUR SEASONS
SKU: B2470789
UPC: 096361569881
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Hose, Global Parts 4813052


A/C Refrigerant Hose, Global Parts 4813052
Business & Industrial
Global Industrial
A/C Refrigerant HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 75.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2734743
UPC: 886429143814
Tags: | Construction. Industrial supply

Start of page
Import Car & Lt Truck Ester Retrofit Kit - Four Seasons 26602


Import Car & Lt Truck Ester Retrofit Kit - Four Seasons 26602
Business & Industrial
Global Industrial
Import Car & Lt Truck Ester Retrofit Kit Compatible with all newer compressionsConverting to R134 is less harmful for the environmentIncludes all parts needed for retrofittingMore cost effective than R12 Application Summary: Universal - - -
**** PRICE: 31.95 USD
Manufacturer : FOUR SEASONS
SKU: B2470917
UPC:
Tags: | Construction. Industrial supply

Start of page
Liquid Line Hose Assembly w/ Captured Orifice Tube - Four Seasons 55721


Liquid Line Hose Assembly w/ Captured Orifice Tube - Four Seasons 55721
Business & Industrial
Global Industrial
Liquid Line Hose Assembly w/ Captured Orifice Tube All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Mustang (98-96) - - -
**** PRICE: 36.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457081
UPC: 0096361557215
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 56748


Suction Line Hose Assembly - Four Seasons 56748
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Honda Civic (15-12) - - -
**** PRICE: 53.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457904
UPC: 0096361567481
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Liquid Hose, Global Parts 4812125


A/C Refrigerant Liquid Hose, Global Parts 4812125
Business & Industrial
Global Industrial
A/C Refrigerant Liquid HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 27.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2736626
UPC: 886429059764
Tags: | Construction. Industrial supply

Start of page
Discharge & Suction Line Hose Assembly - Four Seasons 56057


Discharge & Suction Line Hose Assembly - Four Seasons 56057
Business & Industrial
Global Industrial
Discharge & Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Ford Thunderbird (02) - - -
**** PRICE: 157.95 USD
Manufacturer : FOUR SEASONS
SKU: B2460820
UPC: 0096361560574
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18773


Premium Molded Heater Hose - Gates 18773
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2002 Ford, Explorer, V-6 4.0 L, Pipe-1 To Valve - - -
**** PRICE: 19.25 USD
Manufacturer : Gates
SKU: B2438881
UPC: 0072053179194
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 66441


Discharge Line Hose Assembly - Four Seasons 66441
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Nissan Murano (17-15) - - -
**** PRICE: 23.00 USD
Manufacturer : FOUR SEASONS
SKU: B2455631
UPC: 0096361141841
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55176


Discharge Line Hose Assembly - Four Seasons 55176
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Toyota Tacoma (00-95) - - -
**** PRICE: 58.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458231
UPC: 0096361551763
Tags: | Construction. Industrial supply

Start of page
90 Degree Coolant Hose, Dayco 80400


90 Degree Coolant Hose, Dayco 80400
Business & Industrial
Global Industrial
90 Degree Coolant HoseDayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684. - - -
**** PRICE: 11.25 USD
Manufacturer : Dayco
SKU: B2819489
UPC: 0038244148035
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 12147


Premium Molded Heater Hose - Gates 12147
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2008-07 Ford, Edge, V-6 3.5 L, Heater (Bottom) - - -
**** PRICE: 106.95 USD
Manufacturer : Gates
SKU: B2446248
UPC: 0770075692997
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87819


Molded Heater Hose, Dayco 87819
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat. - - -
**** PRICE: 14.00 USD
Manufacturer : Dayco
SKU: B2817517
UPC: 0036687416124
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 56133


Discharge Line Hose Assembly - Four Seasons 56133
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Nissan Frontier (03); Xterra (03-00) - - -
**** PRICE: 65.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459736
UPC: 0096361561335
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55922


Discharge Line Hose Assembly - Four Seasons 55922
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chrysler 300 Series (17-14) >> Dodge Challenger (17-15); Charger (17-14) - - -
**** PRICE: 36.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457323
UPC: 0096361001183
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 88396


Molded Heater Hose, Dayco 88396
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 13.25 USD
Manufacturer : Dayco
SKU: B2814575
UPC: 0038244947928
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19702


Premium Molded Heater Hose - Gates 19702
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2001-1997 Cadillac, Catera, V-6 3.0 L, Heater Inlet (Front) - - -
**** PRICE: 44.95 USD
Manufacturer : Gates
SKU: B2446318
UPC: 0072053541618
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 86500


Molded Heater Hose, Dayco 86500
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 7.70 USD
Manufacturer : Dayco
SKU: B2814797
UPC: 0038244597475
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Suction Hose, Global Parts 4812291


A/C Refrigerant Suction Hose, Global Parts 4812291
Business & Industrial
Global Industrial
A/C Refrigerant Suction HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 17.50 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2735617
UPC: 886429079915
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87849


Molded Heater Hose, Dayco 87849
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 10.25 USD
Manufacturer : Dayco
SKU: B2814751
UPC: 0036687547224
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 66410


Suction Line Hose Assembly - Four Seasons 66410
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Nissan Altima (18-14) - - -
**** PRICE: 40.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457624
UPC: 0096361146297
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87682


Molded Heater Hose, Dayco 87682
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 11.00 USD
Manufacturer : Dayco
SKU: B2814511
UPC: 0038244598694
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 55162


Discharge Line Hose Assembly - Four Seasons 55162
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Lexus RX400 (08-06) >> Toyota Highlander (07-06) - - -
**** PRICE: 89.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459597
UPC: 0096361551626
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Suction Hose, Global Parts 4812108


A/C Refrigerant Suction Hose, Global Parts 4812108
Business & Industrial
Global Industrial
A/C Refrigerant Suction HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 58.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2735643
UPC: 886429048713
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19380


Premium Molded Heater Hose - Gates 19380
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2006-04 Toyota, Sienna, V-6 3.3 L, Heater - Top To Tee - - -
**** PRICE: 17.75 USD
Manufacturer : Gates
SKU: B2439144
UPC: 0072053982985
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Hose, Global Parts 4812153


A/C Refrigerant Hose, Global Parts 4812153
Business & Industrial
Global Industrial
A/C Refrigerant HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 57.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2734818
UPC: 886429078543
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 66268


Discharge Line Hose Assembly - Four Seasons 66268
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Kia Borrego (09) - - -
**** PRICE: 23.25 USD
Manufacturer : FOUR SEASONS
SKU: B2455635
UPC: 0096361141568
Tags: | Construction. Industrial supply

Start of page
Plastic Hose Connector - Gates 28594


Plastic Hose Connector - Gates 28594
Business & Industrial
Global Industrial
Plastic Hose Connector Gates Heater Hose and Fuel Line Connectors use a unique single barb design to provide greater sealability between single or dual inside diameter hoses.Using straight, elbow and tee shapes almost any hose configuration can be constructed.Glass reinforced nylon resists chemicals, gasoline, diesel fuels and temperatures from -40Fto 480F(-40C to 250C).Bulkheads assure proper insertion depths.Anti-rotation device prevents hose twisting. - - -
**** PRICE: 3.43 USD
Manufacturer : Gates
SKU: B2439695
UPC: 0072053301168
Tags: | Construction. Industrial supply

Start of page
Plastic Hose Connector - Gates 28581


Plastic Hose Connector - Gates 28581
Business & Industrial
Global Industrial
Plastic Hose Connector Gates Heater Hose and Fuel Line Connectors use a unique single barb design to provide greater sealability between single or dual inside diameter hoses.Using straight, elbow and tee shapes almost any hose configuration can be constructed.Glass reinforced nylon resists chemicals, gasoline, diesel fuels and temperatures from -40Fto 480F(-40C to 250C).Bulkheads assure proper insertion depths.Anti-rotation device prevents hose twisting. - - -
**** PRICE: 2.97 USD
Manufacturer : Gates
SKU: B2439655
UPC: 0072053182927
Tags: | Construction. Industrial supply

Start of page
Plastic Hose Connector - Gates 28632


Plastic Hose Connector - Gates 28632
Business & Industrial
Global Industrial
Plastic Hose Connector Gates Heater Hose and Fuel Line Connectors use a unique single barb design to provide greater sealability between single or dual inside diameter hoses.Using straight, elbow and tee shapes almost any hose configuration can be constructed.Glass reinforced nylon resists chemicals, gasoline, diesel fuels and temperatures from -40Fto 480F(-40C to 250C).Bulkheads assure proper insertion depths.Anti-rotation device prevents hose twisting. - - -
**** PRICE: 4.21 USD
Manufacturer : Gates
SKU: B2439423
UPC: 0072053190991
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18779


Premium Molded Heater Hose - Gates 18779
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 1994-1990 Mazda, Protege, 4-Cyl. 1.8 L, Heater To Pipe-2 - - -
**** PRICE: 16.50 USD
Manufacturer : Gates
SKU: B2440464
UPC: 0072053179248
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87703


Molded Heater Hose, Dayco 87703
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a ''quick connect'' endthe Dayco Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation. - - -
**** PRICE: 15.50 USD
Manufacturer : Dayco
SKU: B2814481
UPC: 0038244598908
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 56494


Suction Line Hose Assembly - Four Seasons 56494
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Kia Spectra / Spectra5 (04-01) - - -
**** PRICE: 45.95 USD
Manufacturer : FOUR SEASONS
SKU: B2457727
UPC: 0096361564947
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 12099


Premium Molded Heater Hose - Gates 12099
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2016-14 Subaru, Forester, 4-Cyl. 2.5 L, Throttle Body Inlet - - -
**** PRICE: 11.25 USD
Manufacturer : Gates
SKU: B2439336
UPC: 0770075637455
Tags: | Construction. Industrial supply

Start of page
Suction & Liquid Line Internal Heat Exchange Hose Assembly - Four Seasons 66664


Suction & Liquid Line Internal Heat Exchange Hose Assembly - Four Seasons 66664
Business & Industrial
Global Industrial
Suction & Liquid Line Internal Heat Exchange Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Hyundai Sonata (17-15) - - -
**** PRICE: 60.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459668
UPC: 0096361125414
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19670


Premium Molded Heater Hose - Gates 19670
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2017-14 Toyota, Highlander, V-6 3.5 L, By Pass - - -
**** PRICE: 13.00 USD
Manufacturer : Gates
SKU: B2439316
UPC: 0072053179095
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 18341


Premium Molded Heater Hose - Gates 18341
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2013-10 Chevrolet, Camaro, V-6 3.6 L, Rad. To Eng. - - -
**** PRICE: 10.50 USD
Manufacturer : Gates
SKU: B2439078
UPC: 0770075528470
Tags: | Construction. Industrial supply

Start of page
Premium Molded Heater Hose - Gates 19322


Premium Molded Heater Hose - Gates 19322
Business & Industrial
Global Industrial
Premium Molded Heater Hose Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.Similar to OEM specifications.Has all the quality features of Gates Molded Coolant Hose.Engineered to resist electrochemical degradation - the leading cause of hose failure.Inside diameters range from 1/4" to 1".Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed. Application Summary: 2006-04 Chevrolet, Malibu, V-6 3.5 L, Pipe-3 To Heater - - -
**** PRICE: 21.50 USD
Manufacturer : Gates
SKU: B2437045
UPC: 0072053878165
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Discharge Hose, Global Parts 4812332


A/C Refrigerant Discharge Hose, Global Parts 4812332
Business & Industrial
Global Industrial
A/C Refrigerant Discharge HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 38.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2737557
UPC: 886429080317
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Hose, Global Parts 4811280


A/C Refrigerant Hose, Global Parts 4811280
Business & Industrial
Global Industrial
A/C Refrigerant HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 73.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2734768
UPC: 844434026041
Tags: | Construction. Industrial supply

Start of page
Molded Heater Hose, Dayco 87917


Molded Heater Hose, Dayco 87917
Business & Industrial
Global Industrial
Molded Heater HoseDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40&deg;F (-40&deg;C) to +257&deg;F (+125&deg;C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat. - - -
**** PRICE: 14.75 USD
Manufacturer : Dayco
SKU: B2814910
UPC: 0036687908308
Tags: | Construction. Industrial supply

Start of page
Suction Line Hose Assembly - Four Seasons 56330


Suction Line Hose Assembly - Four Seasons 56330
Business & Industrial
Global Industrial
Suction Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Toyota Solara (03-02) - - -
**** PRICE: 72.95 USD
Manufacturer : FOUR SEASONS
SKU: B2458903
UPC: 0096361563308
Tags: | Construction. Industrial supply

Start of page
Discharge Line Hose Assembly - Four Seasons 56504


Discharge Line Hose Assembly - Four Seasons 56504
Business & Industrial
Global Industrial
Discharge Line Hose Assembly All hoses are constructed with double wall barrier hose compatible with R134A or R12Application specific designContains gaskets, o-rings, or seals to properly replace the productCrimp fitting connection Application Summary: Chevy G Series Fullsize Van / Express (17-08); Medium Duty Van (11-10) >> GMC G Series Fullsize Van / Savana (17-08) >> GMC & CHEVY G Series Medium Duty Van/Express (16-09) - - -
**** PRICE: 71.95 USD
Manufacturer : FOUR SEASONS
SKU: B2459038
UPC: 0096361565043
Tags: | Construction. Industrial supply

Start of page
A/C Refrigerant Suction Hose, Global Parts 4813218


A/C Refrigerant Suction Hose, Global Parts 4813218
Business & Industrial
Global Industrial
A/C Refrigerant Suction HoseSuction Hoses (low side) attach from the compressor to the evaporator. Discharge (high side) attach from compressor to condenser. Liquid Lines attach condenser to evaporator. Manifold hoses are combinations of suction and discharges lines.Designed to meet/exceed OE fit, form and functionDurability tested on every new designDirect fit replacementApplication specific - - -
**** PRICE: 31.95 USD
Manufacturer : GLOBAL PARTS DISTRIBUTORS
SKU: B2736490
UPC: 886429147997
Tags: | Construction. Industrial supply

Start of page

 

 

www.sapiensman.com/ESDictionary - Technical English - Spanish Vocabulary


www.azx7.com