Online Shopping

www.sapiensman.com

Search :

HOME : Shopping

 

Tools & Equipment Search  

small banner

<< Previous Catalog - Home - Next Catalog >> 



#16 << Previous Page - Page #1 - Next Page >> #2

PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 -
1/8


1/8" Dia., 3/8" Shank, 3/8" LOC, 2-5/16" OAL, 4 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 19.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244545
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
5/32


5/32" Dia., 3/8" Shank, 7/16" LOC, 3-1/4" OAL, 2 Flute Solid Carbide Double End Mill, Uncoated, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy. Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 50.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244664
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TN HSS-Cobalt 4-Flute TiN Square Single End Mill, 5/16


Cleveland HGC-4C-TN HSS-Cobalt 4-Flute TiN Square Single End Mill, 5/16" x 3/8" x 1-3/8" x 3-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540190
UPC: 697334326571
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 1-1/4


Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 1-1/4" x 1-1/4" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 113.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540375
UPC: 697334326410
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/16


1/16" Dia., 1/8" Shank, 0.186" LOC, 1-1/2" OAL, 2 Flute Carbide Square Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Solid Carbide Micro End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 14.25 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247426
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 3/4


Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 3/4" x 3/4" x 1-5/8" x 3-7/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 99.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541606
UPC: 697334415275
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 11/16


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 11/16" x 3/4" x 1-5/8" x 5-5/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 133.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541801
UPC: 697334521853
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C HSS 6-Flute Bright Square Single End Mill, 1-1/2


Cleveland HG-4C HSS 6-Flute Bright Square Single End Mill, 1-1/2" x 1-1/4" x 8" x 10-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 279.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541139
UPC: 697334334378
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Made in USA 4 Flute HSS Sq Single End Mill 9/16


Made in USA 4 Flute HSS Sq Single End Mill 9/16" Dia 1/2" Shank 1-3/8" Flute 3-3/8" OAL
Business & Industrial
Global Industrial
Multi-Flute Single End Mills Applications: Profiling, slotting, production milling and finishing applicationsStandard flute length for general all purpose millingMaterials: A wide range of ferrous metals, cinluding stainless steels and high temperature alloys - - -
**** PRICE: 25.95 USD
Manufacturer : STAR TOOL SUPPLY
SKU: B780382
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 23/64


Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 23/64" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 75.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540457
UPC: 697334331995
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TN HSS-Cobalt 6-Flute TiN Square Single End Mill, 3/4


Cleveland HGC-4C-TN HSS-Cobalt 6-Flute TiN Square Single End Mill, 3/4" x 3/4" x 4" x 6-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 92.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540563
UPC: 697334327110
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 5/8


Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 5/8" x 5/8" x 1-1/8" x 5"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 3-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 115.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540473
UPC: 697334329060
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 13/32


Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 13/32" x 1/2" x 1-3/4" x 3-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 92.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541359
UPC: 697334391142
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C-TN HSS 4-Flute TiN Square Double End Mill, 17/64


Cleveland HD-4C-TN HSS 4-Flute TiN Square Double End Mill, 17/64" x 3/8" x 11/16" x 3-3/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 74.25 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540684
UPC: 697334330684
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/16


1/16" Dia., 1/8" Shank, 3/16" LOC, 1-1/2" OAL, 2 Flute Solid Carbide Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 12.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244454
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
9/32


9/32" Dia., 3/8" Shank, 11/16" LOC, 2-1/2" OAL, 4 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 25.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244850
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 7/8


Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 7/8" x 7/8" x 2-1/2" x 4-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 119.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541540
UPC: 697334417286
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 1/2


Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 1/2" x 3/8" x 13/16" x 2-11/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 1-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 78.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541659
UPC: 697334013693
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
5/64


5/64" Dia., 1/8" Shank, 0.234" LOC, 1-1/2" OAL, 2 Flute Carbide Square Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Solid Carbide Micro End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 13.50 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247512
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
0.020


0.020" Dia., 1/8" Shank, 0.100" LOC, 2-1/2" OAL, 3 Flute Carbide Square Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 31.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247527
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/4


1/4" Dia., 3/8" Shank, 5/8" LOC, 2-7/16" OAL, 4 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 18.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244723
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 1


Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 1" x 3/4" x 1-1/2" x 4-1/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-5/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 113.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541316
UPC: 697334337911
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
8mm Dia., 10mm Shank, 19mm LOC, 69mm OAL, 2 Flute Cobalt Single End Mill, TiCN


8mm Dia., 10mm Shank, 19mm LOC, 69mm OAL, 2 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 36.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244507
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
5/32


5/32" Dia., 3/8" Shank, 15/64" LOC, 2-3/4" OAL, 4 Flute Cobalt Double End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Cobalt Double End Mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 24.50 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244684
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1


1" Dia., 1" Shank, 6" LOC, 8-1/2" OAL, 4 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 157.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244473
UPC: 00733438413585
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 15/32


Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 15/32" x 1/2" x 2" x 4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 98.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541361
UPC: 697334391166
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
32mm Dia., 32mm Shank, 53mm LOC, 133mm OAL, 6 Flute Cobalt Single End Mill, TiCN


32mm Dia., 32mm Shank, 53mm LOC, 133mm OAL, 6 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 151.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244564
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 21/64


Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 21/64" x 3/8" x 9/16" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 78.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541060
UPC: 697334337386
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Import 4 Flute HSS Sq Single End Mill 3/4


Import 4 Flute HSS Sq Single End Mill 3/4" Dia 3/4" Shank 3" Flute 5-1/4" OAL
Business & Industrial
Global Industrial
Multi-Flute Single End Mills Applications: Profiling, slotting, production milling and finishing applicationsLong length for deep pocket milling and long reach applicationsMaterials: A wide range of ferrous metals, cinluding stainless steels and high temperature alloys - - -
**** PRICE: 34.95 USD
Manufacturer : STAR TOOL SUPPLY
SKU: B780539
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 3/8


Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 3/8" x 3/8" x 3/4" x 3-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 84.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541592
UPC: 697334412120
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 1-1/4


Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 1-1/4" x 1-1/4" x 3" x 5-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 140.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541364
UPC: 697334391296
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1-3/4


1-3/4" Dia., 1-1/4" Shank, 2" LOC, 4-1/2" OAL, 6 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 200.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244406
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C HSS-Cobalt 4-Flute Bright Square Single End Mill, 5/8


Cleveland HGC-4C HSS-Cobalt 4-Flute Bright Square Single End Mill, 5/8" x 5/8" x 4" x 6-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 129.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541665
UPC: 697334429203
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C HSS 4-Flute Bright Square Single End Mill, 7/16


Cleveland HG-4C HSS 4-Flute Bright Square Single End Mill, 7/16" x 3/8" x 2-3/4" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541088
UPC: 697334334330
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 21/32


Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 21/32" x 5/8" x 1-5/16" x 3-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-7/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541915
UPC: 662355752272
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-2 HSS-Cobalt 2-Flute Bright Square Single End Mill, 1/2


Cleveland HGC-2 HSS-Cobalt 2-Flute Bright Square Single End Mill, 1/2" x 3/8" x 13/16" x 2-11/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 77.50 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541393
UPC: 662355751305
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 3/16


Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 3/16" x 3/8" x 7/16" x 3-1/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-13/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 82.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540534
UPC: 697334328841
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Carbide HP End Mill 3/16


Carbide HP End Mill 3/16" x 1/4"
Business & Industrial
Global Industrial
3/16 x 3/16 x 1/4 x 2 2FL Carb 45 SE r0.005 TiCN - - -
**** PRICE: 20.00 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2311040
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute TiCN Square Single End Mill, 1-3/4


Cleveland HG-2 HSS 2-Flute TiCN Square Single End Mill, 1-3/4" x 3/4" x 1-1/2" x 3-7/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-3/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 142.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541910
UPC: 662355752821
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 11/32


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 11/32" x 3/8" x 3/4" x 3-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 79.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541685
UPC: 697334521778
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
3/64


3/64" Dia., 1/8" Shank, 1/8" LOC, 1-1/2" OAL, 4 Flute Solid Carbide Single End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 14.50 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244720
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 5/8


Cleveland HG-2-TC HSS 2-Flute TiCN Square Single End Mill, 5/8" x 1/2" x 5/8" x 2-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 107.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541763
UPC: 662355752586
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
22mm Dia., 20mm Shank, 38mm LOC, 104mm OAL, 6 Flute Cobalt Single End Mill, Uncoated


22mm Dia., 20mm Shank, 38mm LOC, 104mm OAL, 6 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 66.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244335
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 11/16


Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 11/16" x 3/4" x 2-1/4" x 4-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 87.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541375
UPC: 697334390756
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 1/4


Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 1/4" x 3/8" x 1/2" x 2-7/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 84.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540195
UPC: 697334325345
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 7/8


Cleveland HG-2 HSS 2-Flute Bright Square Single End Mill, 7/8" x 7/8" x 2" x 4-1/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541777
UPC: 662355752029
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Import 4 Flute Carbide Sq Single End Mill 4.00mm Dia 4mm Shank 14mm Flute 50mm OAL TiAlN


Import 4 Flute Carbide Sq Single End Mill 4.00mm Dia 4mm Shank 14mm Flute 50mm OAL TiAlN
Business & Industrial
Global Industrial
4 Flute Solid Carbide Single End TiAlN coated, Metric TMX End Mill; 4 mm (.1575") cutting diameter x 4 mm shank diameter x 14 mm Length of cut (LOC) x 50 mm overall length (OAL) - - -
**** PRICE: 14.75 USD
Manufacturer : TOOLMEX CORP.
SKU: B657688
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 15/16


Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 15/16" x 5/8" x 1-1/2" x 4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 93.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541869
UPC: 662355752388
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
14mm Dia., 12mm Shank, 26mm LOC, 83mm OAL, 2 Flute Cobalt Single End Mill, Uncoated


14mm Dia., 12mm Shank, 26mm LOC, 83mm OAL, 2 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 33.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244409
UPC: 00733438163510
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 1


Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 1" x 1" x 4" x 6-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 109.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540765
UPC: 697334333982
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 1/2


Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 1/2" x 1/2" x 1-1/4" x 3-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541546
UPC: 697334415251
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Import 4 Flute HSS Sq Single End Mill 1-5/8


Import 4 Flute HSS Sq Single End Mill 1-5/8" Dia 1-1/4" Shank 2" Flute 4-1/2" OAL
Business & Industrial
Global Industrial
Multi-Flute Single End Mills Applications: Profiling, slotting, production milling and finishing applicationsStandard flute length for general all purpose millingMaterials: A wide range of ferrous metals, cinluding stainless steels and high temperature alloys - - -
**** PRICE: 72.95 USD
Manufacturer : STAR TOOL SUPPLY
SKU: B780873
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
5/8


5/8" Dia., 5/8" Shank, 1-1/4" LOC, 3-1/2" OAL, 4 Flute Solid Carbide Single End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 86.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244610
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
3/32


3/32" Dia., 0.139" LOC, 2-1/2" OAL, 0.500" LBS, 3 Flute Carbide Square Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The extended neck enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 31.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247569
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 21/64


Cleveland HGC-2-TC HSS-Cobalt 2-Flute TiCN Square Single End Mill, 21/64" x 3/8" x 9/16" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 82.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540298
UPC: 697334325390
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 21/64


Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 21/64" x 3/8" x 3/4" x 3-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 74.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540656
UPC: 697334331131
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C-TN HSS 4-Flute TiN Square Double End Mill, 13/64


Cleveland HD-4C-TN HSS 4-Flute TiN Square Double End Mill, 13/64" x 3/8" x 9/16" x 3-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 96.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540605
UPC: 697334330646
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-2 HSS-Cobalt 2-Flute Bright Square Double End Mill, 25/64


Cleveland HDC-2 HSS-Cobalt 2-Flute Bright Square Double End Mill, 25/64" x 1/2" x 13/16" x 4-1/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 3-5/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540550
UPC: 697334328414
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 7/16


Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 7/16" x 3/8" x 2-3/4" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 98.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540567
UPC: 697334327240
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/8


1/8" Dia., 3/8" Shank, 3/8" LOC, 2-5/16" OAL, 2 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 20.00 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244326
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 5/8


Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 5/8" x 5/8" x 1-5/8" x 3-3/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 89.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540271
UPC: 697334326359
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
16mm Dia., 16mm Shank, 32mm LOC, 89mm OAL, 4 Flute Solid Carbide Single End Mill, AlTiN


16mm Dia., 16mm Shank, 32mm LOC, 89mm OAL, 4 Flute Solid Carbide Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 104.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244628
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 1-1/4


Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 1-1/4" x 1" x 4" x 6-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 138.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541124
UPC: 697334334224
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 7/8


Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 7/8" x 7/8" x 2-1/2" x 4-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 129.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541186
UPC: 697334390954
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 3/8


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 3/8" x 3/8" x 3/4" x 3-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 76.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541686
UPC: 697334521785
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 7/32


Cleveland HG-4C-TN HSS 4-Flute TiN Square Single End Mill, 7/32" x 3/8" x 5/8" x 2-7/16"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-13/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 86.25 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540612
UPC: 697334331926
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 1-7/8


Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 1-7/8" x 1-1/4" x 1-5/8" x 4-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 158.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541793
UPC: 662355752494
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-2-TN HSS-Cobalt 2-Flute TiN Square Single End Mill, 3/16


Cleveland HGC-2-TN HSS-Cobalt 2-Flute TiN Square Single End Mill, 3/16" x 3/8" x 7/16" x 2-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 81.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540251
UPC: 697334325017
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 5/8


Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 5/8" x 5/8" x 1-5/8" x 3-3/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 87.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540931
UPC: 697334332701
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 1-1/8


Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 1-1/8" x 7/8" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 98.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540888
UPC: 697334332916
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C HSS-Cobalt 4-Flute Bright Square Single End Mill, 5/8


Cleveland HGC-4C HSS-Cobalt 4-Flute Bright Square Single End Mill, 5/8" x 5/8" x 1-5/8" x 3-3/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 75.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541575
UPC: 697334427032
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 25/64


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 25/64" x 1/2" x 1" x 4-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 3-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540392
UPC: 697334329350
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 5/32


Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 5/32" x 3/8" x 7/16" x 3-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 96.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540626
UPC: 697334330295
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 5/16


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 5/16" x 3/8" x 3/4" x 3-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 76.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541723
UPC: 697334521761
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TN HSS-Cobalt 4-Flute TiN Square Single End Mill, 1/2


Cleveland HGC-4C-TN HSS-Cobalt 4-Flute TiN Square Single End Mill, 1/2" x 1/2" x 2" x 4", 13.54mm
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 73.50 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541442
UPC: 697334428619
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 9/16


Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 9/16" x 5/8" x 1-3/8" x 5"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3-5/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 145.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540762
UPC: 697334331261
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C HSS 6-Flute Bright Square Single End Mill, 1-3/8


Cleveland HG-4C HSS 6-Flute Bright Square Single End Mill, 1-3/8" x 1" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 92.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541646
UPC: 662355750353
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
7mm Dia., 10mm Shank, 16mm LOC, 69mm OAL, 4 Flute Cobalt Single End Mill, Uncoated


7mm Dia., 10mm Shank, 16mm LOC, 69mm OAL, 4 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 28.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244860
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
4mm Dia., 4mm Shank, 14mm LOC, 51mm OAL, 2 Flute Solid Carbide Single End Mill, Uncoated


4mm Dia., 4mm Shank, 14mm LOC, 51mm OAL, 2 Flute Solid Carbide Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 16.50 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244328
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
32mm Dia., 32mm Shank, 53mm LOC, 133mm OAL, 2 Flute Cobalt Single End Mill, TiCN


32mm Dia., 32mm Shank, 53mm LOC, 133mm OAL, 2 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 129.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244550
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 7/32


Cleveland HDC-4C HSS-Cobalt 4-Flute Bright Square Double End Mill, 7/32" x 3/8" x 9/16" x 3-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 79.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541721
UPC: 697334521730
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
3/16


3/16" Dia., 3/8" Shank, 1/2" LOC, 2-3/8" OAL, 4 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 25.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244902
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
7/32


7/32" Dia., 3/8" Shank, 9/16" LOC, 3-1/4" OAL, 4 Flute Cobalt Double End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Cobalt Double End Mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 30.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244873
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
16mm Dia., 3/4


16mm Dia., 3/4" Shank, 1-5/16" LOC, 5" OAL, 2 Flute Cobalt Double End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 84.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244252
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 15/64


Cleveland HD-4C-TC HSS 4-Flute TiCN Square Double End Mill, 15/64" x 3/8" x 5/8" x 3-3/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 73.50 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540718
UPC: 697334331070
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 11/64


Cleveland HG-2-TN HSS 2-Flute TiN Square Single End Mill, 11/64" x 3/8" x 7/16" x 2-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 85.50 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541074
UPC: 697334337553
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 29/64


Cleveland HD-4C HSS 4-Flute Bright Square Double End Mill, 29/64" x 1/2" x 1" x 4-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 101.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540481
UPC: 697334330448
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/2


1/2" Dia., 1/2" Shank, 1/2" LOC, 2-1/2" OAL, 4 Flute Cobalt Single End Mill, TiCN
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 37.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244780
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 1


Cleveland HG-2 HSS 2-Flute TiN Square Single End Mill, 1" x 1/2" x 1-1/2" x 3-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 141.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541879
UPC: 662355752418
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1/8


1/8" Dia., 3/8" Shank, 3/16" LOC, 2-3/4" OAL, 2 Flute Cobalt Double End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 23.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244537
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
3/8


3/8" Dia., 3/8" Shank, 3/4" LOC, 3-1/2" OAL, 2 Flute Solid Carbide Double End Mill, AlTiN, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy. Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 64.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244754
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
1-3/8


1-3/8" Dia., 3/4" Shank, 1-5/8" LOC, 3-7/8" OAL, 2 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 109.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244512
UPC: 00733438101406
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
5/8


5/8" Dia., 5/8" Shank, 2-1/2" LOC, 4-5/8" OAL, 2 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Cobalt End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 55.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244353
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
0.010


0.010" Dia., 1/8" Shank, 0.030" LOC, 1-1/2" OAL, 4 Flute Carbide Square Single End Mill, ALTIN
Business & Industrial
Global Industrial
4 Flute Solid Carbide Micro End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 27.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247517
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-2 HSS 2-Flute Bright Square Double End Mill, 1


Cleveland HD-2 HSS 2-Flute Bright Square Double End Mill, 1" x 1" x 1-5/8" x 6-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 4-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 94.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541621
UPC: 697334420880
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 11/16


Cleveland HDC-2-TC HSS-Cobalt 2-Flute TiCN Square Double End Mill, 11/16" x 3/4" x 1-5/16" x 5-5/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 4-5/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 139.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540474
UPC: 697334329077
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 29/64


Cleveland HGC-4C-TC HSS-Cobalt 4-Flute TiCN Square Single End Mill, 29/64" x 1/2" x 1-1/4" x 3-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 89.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540373
UPC: 697334326304
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HD-2 HSS 2-Flute Bright Square Double End Mill, 19/32


Cleveland HD-2 HSS 2-Flute Bright Square Double End Mill, 19/32" x 5/8" x 1-1/8" x 5"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright Finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 109.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541101
UPC: 697334336396
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 27/64


Cleveland HG-4C-TC HSS 4-Flute TiCN Square Single End Mill, 27/64" x 3/8" x 1" x 2-11/16"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 98.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540789
UPC: 697334332596
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page
8mm Dia., 10mm Shank, 19mm LOC, 69mm OAL, 4 Flute Cobalt Single End Mill, Uncoated


8mm Dia., 10mm Shank, 19mm LOC, 69mm OAL, 4 Flute Cobalt Single End Mill, Uncoated
Business & Industrial
Global Industrial
Multiple Flute Cobalt End Mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 27.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244878
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA

↑ Start of page

Category Home ... ALL PRODUCTS >> : 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90 - 91 - 92 - 93 - 94 - 95 - 96 - 97 - 98 - 99 - 100 - 101 - 102 - 103 - 104 - 105 - 106 - 107 - 108 - 109 - 110 - 111 - 112 - 113 - 114 - 115 - 116 - 117 - 118 - 119 - 120 - 121 - 122 - 123 - 124 - 125 - 126 - 127 - 128 - 129 - 130 - 131 - 132 - 133 - 134 - 135 - 136 - 137 - 138 - 139 - 140 - 141 - 142 - 143 - 144 - 145 - 146 - 147 - 148 - 149 - 150 - 151 - 152 - 153 - 154 - 155 - 156 - 157 - 158 - 159 - 160 - 161 - 162 - 163 - 164 - 165 - 166 - 167 - 168 - 169 - 170 - 171 - 172 - 173 - 174 - 175 - 176 - 177 - 178 - 179 - 180 - 181 - 182 - 183 - 184 - 185 - 186 - 187 - 188 - 189 - 190 - 191 - 192 - 193 - 194 - 195 - 196 - 197 - 198 - 199 - 200 - 201 - 202 - 203 - 204 - 205 - 206 - 207 - 208 - 209 - 210 - 211 - 212 - 213 - 214 - 215 - 216 - 217 - 218 - 219 - 220 - 221 - 222 - 223 - 224 - 225 - 226 - 227 - 228 - 229 - 230 - 231 - 232 - 233 - 234 - 235 - 236 - 237 - 238 - 239 - 240 - 241 - 242 - 243 - 244 - 245 - 246 - 247 - 248 - 249 - 250 - 251 - 252 - 253 - 254 - 255 - 256 - 257 - 258 - 259 - 260 - 261 - 262 - 263 - 264 - 265 - 266 - 267 - 268 - 269 - 270 - 271 - 272 - 273 - 274 - 275 - 276 - 277 - 278 - 279 - 280 - 281 - 282 - 283 - 284 - 285 - 286 - 287 - 288 - 289 - 290 - 291 - 292 - 293 - 294 - 295 - 296 - 297 - 298 - 299 - 300 - 301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350 - 351 - 352 - 353 - 354 - 355 - 356 - 357 - 358 - 359 - 360 - 361 - 362 - 363 - 364 - 365 - 366 - 367 - 368 - 369 - 370 - 371 - 372 - 373 - 374 - 375 - 376 - 377 - 378 - 379 - 380 - 381 - 382 - 383 - 384 - 385 - 386 - 387 - 388 - 389 - 390 - 391 - 392 - 393 - 394 - 395 - 396 - 397 - 398 - 399 - 400 -

 

 

www.sapiensman.com/ESDictionary - Technical English - Spanish Vocabulary

www.azx7.com