<< Previous Catalog - Home - Next Catalog >>
 
#16 << Previous Page - Page #1 - Next Page >> #2
PRODUCT CATALOG PAGES >> : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 -
1/2" Dia., 1/2" Shank, 5/8" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 53.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243678
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/2" Dia., 1/2" Shank, 1" LOC, 4" OAL, 2 Flute Solid Carbide Ball Double End Mill, Uncoated, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 97.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243729
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TN HSS 4-Flute TiN Ball Nose Single End Mill, 3/8" x 3/8" x 2-1/2" x 4-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 103.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540944
UPC: 697334333555
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Made in USA 2 Flute Carbide Ball Micro Mill 0.120" Dia 1/8" Shank 0.180" Flute 1-1/2" OAL AlTiN
Business & Industrial
Global Industrial
Solid Carbide Miniature End Mill Applications: For drilling fine details in micro machining processesFeatures: Solid C-2 grade premium sub-micron carbide with 10% cobaltCenter CuttingRight Hand Cut / Right Hand SpiralStub length promotes rigidityAlTiN coating provides increased lubricity and heat resistance for longer tool life, especially when milling steels, alloy steels and hardened steelsTechnical Data: Diameter Tolerance: +/-0.0005"Length of Cut Tolerance: +0.0000 / +0.0120"Shank Tolerance: +0.0000 / -0.0003" - - -
**** PRICE: 116.25 USD
Manufacturer : Monster Tool Company
SKU: B802186
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/64" Dia., 1/8" Shank, 0.045" LOC, 1-1/2" OAL, 2 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 27.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247411
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B HSS 2-Flute Bright Ball Nose Double End Mill, 5/32" x 3/8" x 7/16" x 3-1/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-11/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 104.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541207
UPC: 697334391364
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 5/16" Shank, 1/2" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide Ball Double End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 43.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243778
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
12mm Dia., 12mm Shank, 25mm LOC, 76mm OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 65.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243835
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/4" Dia., 1/4" Shank, 3/4" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 28.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243721
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B-TC HSS-Cobalt 4-Flute TiCN Ball Nose Single End Mill, 5/8" x 5/8" x 1-5/8" x 3-3/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 86.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540498
UPC: 697334327820
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
10mm Dia., 10mm Shank, 25mm LOC, 70mm OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 44.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244605
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/8" Dia., 3/8" Shank, 3/8" LOC, 3-1/16" OAL, 2 Flute Cobalt Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Ball Double End Cobalt End mills provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided and they are commonly used in dies and molds. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. - - -
**** PRICE: 40.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243620
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/16" Dia., 3/16" Shank, 3/8" LOC, 1-1/2" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 20.25 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243707
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B HSS-Cobalt 2-Flute Bright Ball Nose Single End Mill, 3/8" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 85.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541616
UPC: 697334426530
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TC HSS 2-Flute TiCN Ball Nose Single End Mill, 3/4" x 3/4" x 1-5/8" x 3-7/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 129.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541251
UPC: 697334390381
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TC HSS 2-Flute TiCN Ball Nose Single End Mill, 5/16" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 87.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541353
UPC: 697334390305
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 3/16" x 3/8" x 1/2" x 2-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541349
UPC: 697334390114
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B-TC HSS-Cobalt 2-Flute TiCN Ball Nose Single End Mill, 3/4" x 3/4" x 1-5/8" x 3-7/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 123.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540476
UPC: 697334327561
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B-TN HSS-Cobalt 2-Flute TiN Ball Nose Single End Mill, 3/8" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 74.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540569
UPC: 697334327417
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.025" Dia., 0.037" LOC, 2-1/2" OAL, 0.075" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 39.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247445
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B-TN HSS-Cobalt 4-Flute TiN Ball Nose Single End Mill, 1/4" x 3/8" x 1-3/4" x 3-9/16"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-13/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 107.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541565
UPC: 662355750131
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/32" Dia., 0.046" LOC, 2-1/2" OAL, 0.375" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 40.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247533
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B-TC HSS-Cobalt 6-Flute TiCN Ball Nose Single End Mill, 1-1/4" x 1-1/4" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 219.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540451
UPC: 697334327875
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B HSS 2-Flute Bright Ball Nose Single End Mill, 3/4" x 3/4" x 1-5/8" x 3-7/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 115.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541274
UPC: 697334421337
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B HSS 2-Flute Bright Ball Nose Single End Mill, 5/8" x 5/8" x 1-3/8" x 3-3/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-3/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 99.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541343
UPC: 697334421290
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B HSS 2-Flute Bright Ball Nose Double End Mill, 1/4" x 3/8" x 3/8" x 3-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 107.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541792
UPC: 662355751190
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B-TC HSS 2-Flute TiCN Ball Nose Double End Mill, 3/16" x 3/8" x 7/16" x 3-1/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-13/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 81.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541509
UPC: 697334391609
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Made in USA 2 Flute Cobalt Ball Single End Mill 11/16" Dia 1/2" Shank 1-5/16" Flute 3-5/16" OAL
Business & Industrial
Global Industrial
Ball End Mills Used for general milling operations and on softer metals. Allows maximum space for chip ejection while working. - - -
**** PRICE: 81.95 USD
Manufacturer : STAR TOOL SUPPLY
SKU: B829364
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 1/8" x 3/8" x 3/8" x 2-5/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541348
UPC: 697334390107
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.055" Dia., 0.082" LOC, 2-1/2" OAL, 0.165" LBS, 3 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 42.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247478
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TC HSS 2-Flute TiCN Ball Nose Single End Mill, 1/2" x 1/2" x 1" x 3-1/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 101.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541199
UPC: 697334390336
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/4" Dia., 1/4" Shank, 1/2" LOC, 2-1/2" OAL, 2 Flute Solid Carbide Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy. - - -
**** PRICE: 34.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243605
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/8" Dia., 3/4" LOC, 3-1/2" OAL, 2 Flute Solid Carbide Ball Double End Mill, Uncoated, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 65.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244231
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B-TN HSS 2-Flute TiN Ball Nose Double End Mill, 3/16" x 3/8" x 9/32" x 3-1/4"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 79.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541838
UPC: 697334013396
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B-TN HSS-Cobalt 2-Flute TiN Ball Nose Single End Mill, 3/16" x 3/8" x 1/2" x 2-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-7/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.75 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540573
UPC: 697334327387
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B-TN HSS-Cobalt 2-Flute TiN Ball Nose Single End Mill, 5/16" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 74.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540584
UPC: 697334327400
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1" Dia., 1" Shank, 1-1/2" LOC, 4" OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 406.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243698
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/8" Dia., 3/8" Shank, 1-1/8" LOC, 3" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 59.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243706
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/4" Dia., 1/4" Shank, 1/2" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide Ball Double End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 34.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243843
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B HSS 2-Flute Bright Ball Nose Single End Mill, 3/4" x 1/2" x 1-5/16" x 3-5/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-5/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 115.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541273
UPC: 697334421320
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 3/8" Shank, 3/4" LOC, 3-1/2" OAL, 4 Flute Solid Carbide Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide Ball Double End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 63.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243676
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.030" Dia., 0.045" LOC, 2-1/2" OAL, 0.090" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 39.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247399
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
20mm Dia., 20mm Shank, 38mm LOC, 100mm OAL, 4 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 193.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243658
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.040" Dia., 1/8" Shank, 0.120" LOC, 1-1/2" OAL, 2 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 20.25 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247557
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B HSS-Cobalt 6-Flute Bright Ball Nose Single End Mill, 1-1/2" x 1-1/4" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 250.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540525
UPC: 697334327622
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B-TN HSS 2-Flute TiN Ball Nose Double End Mill, 3/8" x 3/8" x 9/16" x 3-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 79.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541357
UPC: 697334391500
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TC HSS 4-Flute TiCN Ball Nose Single End Mill, 7/8" x 7/8" x 1-7/8" x 4-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 109.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540858
UPC: 697334333197
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/8" Dia., 1/8" Shank, 1/4" LOC, 1-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 13.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243825
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 1-1/4" x 1-1/4" x 2-1/2" x 5"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 95.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541195
UPC: 697334390251
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 5/16" Shank, 1/2" LOC, 2" OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 29.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243821
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/2" Dia., 1/2" Shank, 5/8" LOC, 3" OAL, 2 Flute Solid Carbide Ball Double End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy. - - -
**** PRICE: 86.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243743
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/8" Dia., 1/8" Shank, 1.500" LOC, 3" OAL, 3 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 56.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247417
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.008" Dia., 1/8" Shank, 0.024" LOC, 1-1/2" OAL, 2 Flute Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 43.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247551
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B HSS 2-Flute Bright Ball Nose Single End Mill, 9/16" x 1/2" x 1-1/8" x 3-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 83.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541341
UPC: 697334421269
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/4" Dia., 3/4" Shank, 2-1/4" LOC, 5" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 282.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243714
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 3/4" LOC, 3-1/2" OAL, 2 Flute Solid Carbide Ball Double End Mill, Uncoated, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 63.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243650
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/64" Dia., 1/8" Shank, 0.045" LOC, 1-1/2" OAL, 4 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
4 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 31.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247384
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Made in USA 2 Flute Cobalt Ball Single End Mill 17/32" Dia 1/2" Shank 1-1/8" Flute 3-1/8" OAL
Business & Industrial
Global Industrial
Ball End Mills Used for general milling operations and on softer metals. Allows maximum space for chip ejection while working. - - -
**** PRICE: 65.95 USD
Manufacturer : STAR TOOL SUPPLY
SKU: B828816
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/16" Dia., 3/8" Shank, 7/16" LOC, 3-1/8" OAL, 2 Flute Cobalt Ball Double End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Ball Double End Cobalt End mills provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided and they are commonly used in dies and molds. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. - - -
**** PRICE: 40.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243610
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
4mm Dia., 4mm Shank, 14mm LOC, 51mm OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 19.25 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2244607
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/8" Dia., 5/8" Shank, 1-1/4" LOC, 3-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 138.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243751
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
7/32" Dia., 1/4" Shank, 5/8" LOC, 2-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 24.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243758
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/8" Dia., 1/8" Shank, 1/4" LOC, 1-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 13.25 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243599
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/64" Dia., 1/8" Shank, 0.078" LOC, 2-1/2" OAL, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 38.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247541
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B-TN HSS-Cobalt 2-Flute TiN Ball Nose Single End Mill, 1/8" x 3/8" x 3/8" x 2-5/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from 8% cobalt high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 91.25 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540486
UPC: 697334327370
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3mm Dia., 3mm Shank, 12mm LOC, 38mm OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 16.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243585
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/4" Dia., 3/8" Shank, 5/8" LOC, 2-7/16" OAL, 2 Flute Cobalt Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Ball End Cobalt End mills provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 23.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243829
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/2" Dia., 1/2" Shank, 1-1/4" LOC, 3-1/4" OAL, 4 Flute Cobalt Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
4 Flute Ball End Cobalt End mills provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. - - -
**** PRICE: 46.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243589
UPC: 00733438115182
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B HSS 2-Flute TiCN Ball Nose Single End Mill, 15/16" x 3/4" x 2-1/4" x 4-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 97.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541870
UPC: 662355753187
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.060" Dia., 0.090" LOC, 2-1/2" OAL, 0.180" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 38.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247394
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 3/8" x 3/8" x 3/4" x 2-1/2"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 82.00 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541193
UPC: 697334390145
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
16mm Dia., 16mm Shank, 32mm LOC, 89mm OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 116.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243786
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 5/16" Shank, 13/16" LOC, 2-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 40.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243598
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B-TN HSS 2-Flute TiN Ball Nose Double End Mill, 1/2" x 1/2" x 13/16" x 4-1/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 3-5/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 111.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541569
UPC: 697334391531
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/4" Dia., 3/4" Shank, 1-5/8" LOC, 3-7/8" OAL, 2 Flute Cobalt Ball Single End Mill, TiCN
Business & Industrial
Global Industrial
2 Flute Ball End Cobalt End mills provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Cobalt provides better wear resistance and retains hardness in high temperatures when milling difficult to machine materials. They allow for increased feed rates resulting in exceptional metal removal rates and good finishes. - - -
**** PRICE: 79.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243694
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TN HSS 4-Flute TiN Ball Nose Single End Mill, 5/16" x 3/8" x 1-3/8" x 3-1/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 87.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540912
UPC: 697334333272
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/16" Dia., 3/4" LOC, 3-1/2" OAL, 2 Flute Solid Carbide Ball Double End Mill, AlTiN, Flat
Business & Industrial
Global Industrial
2 Flute Carbide Ball Double End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy Flat allows set screws in holder to tighten on the flats to prevent end mill from rotating. - - -
**** PRICE: 71.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243634
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
0.025" Dia., 1/8" Shank, 0.075" LOC, 1-1/2" OAL, 4 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
4 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 28.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247473
UPC: 00733438531579
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TC HSS 4-Flute TiCN Ball Nose Single End Mill, 5/8" x 5/8" x 2-1/2" x 4-5/8"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/8". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 100.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540915
UPC: 697334333395
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/32" Dia., 0.046" LOC, 2-1/2" OAL, 0.375" LBS, 3 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 44.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247547
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/4" Dia., 3/4" Shank, 1-1/2" LOC, 4" OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 155.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243701
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TC HSS 2-Flute TiCN Ball Nose Single End Mill, 1-1/2" x 1-1/4" x 2-1/2" x 5"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 131.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541266
UPC: 697334390435
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B HSS-Cobalt 6-Flute Bright Ball Nose Single End Mill, 1-1/4" x 1-1/4" x 2" x 4-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright Finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 186.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540524
UPC: 697334327615
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/64" Dia., 0.117" LOC, 2-1/2" OAL, 0.234" LBS, 3 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 42.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247544
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-4B-TC HSS-Cobalt 4-Flute TiCN Ball Nose Single End Mill-1/4" x 3/8" x 1-3/4" x 3-9/16"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and high-temp alloy. This end mill has a helix angle of 30 and a shank length of 1-13/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 79.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541735
UPC: 662355750155
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TC HSS 4-Flute TiCN Ball Nose Single End Mill, 3/8" x 3/8" x 1-1/2" x 3-1/4"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiCN (Titanium Carbonitride) coating increases cutting surface hardness, making the tool highly resistant to abrasive wear, increase lubricity and prevents galling, used for very aggressive machining of stainless steel and non-ferrous materials. TiCN coating provides increase speeds of 35 to 50% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel, stainless steel and cast iron. This end mill has a helix angle of 30 and a shank length of 1-3/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 97.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540867
UPC: 697334333371
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/8" Dia., 3/8" Shank, 1" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 42.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243636
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/16" Dia., 0.093" LOC, 2-1/2" OAL, 0.750" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 39.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247450
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
7/32" Dia., 1/4" Shank, 5/8" LOC, 2-1/2" OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 29.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243773
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HGC-2B HSS-Cobalt 2-Flute Bright Ball Nose Single End Mill, 1/8" x 3/8" x 3/8" x 2-5/16"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from 8% cobalt for high red hardness. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and stainless steel. This end mill has a helix angle of 30 and a shank length of 1-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 82.50 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541557
UPC: 697334426431
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-4B-TN HSS 4-Flute TiN Ball Nose Single End Mill, 1-1/2" x 1-1/4" x 4" x 6-1/2"
Business & Industrial
Global Industrial
4 or more flutes generate higher surface finish than 2 flute end mills, resulting in higher feed rates. Recommended for finishing operations in a wide range of ferrous and non-ferrous materials. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/2". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 278.95 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2540820
UPC: 697334333340
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/64" Dia., 0.070" LOC, 2-1/2" OAL, 0.141" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 38.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247388
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
4mm Dia., 4mm Shank, 14mm LOC, 51mm OAL, 2 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 21.75 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243695
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 9/16" x 1/2" x 1-1/8" x 3-3/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 97.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541243
UPC: 697334390176
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HD-2B HSS 2-Flute Bright Ball Nose Double End Mill, 1/8" x 3/8" x 3/16" x 3-1/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Double end reduces tool costs and down time. Manufactured from premium high-speed steel. Bright, uncoated finish. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-15/16". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 107.85 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541790
UPC: 662355751176
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
3/8" Dia., 3/8" Shank, 1" LOC, 2-1/2" OAL, 2 Flute Solid Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
2 Flute Carbide End mills provide enhanced chip carrying capability and are ideal for slotting and pocketing applications.provide maximum chip removal and are used to produce shallow holes. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 51.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243697
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Cleveland HG-2B-TN HSS 2-Flute TiN Ball Nose Single End Mill, 3/4" x 3/4" x 1-5/8" x 3-7/8"
Business & Industrial
Global Industrial
2 flutes allow for maximum chip ejection. Ball nose is designed for milling radius bottom slots, fillets and special contours. Center cutting for use in milling slots, pockets and for plunge cutting. Single end. Manufactured from premium high-speed steel. TiN (Titanium Nitride) coating adds lubricity and hardness, which enhances chip flow, finish surface quality and tool life. TiN coating provides increase of 25 to 30% in machining speeds versus Manufactured from premium high-speed steel. Bright, uncoated tools. For milling in carbon steel, alloy steel, die steel and cast iron. This end mill has a helix angle of 30 and a shank length of 2-1/4". Made In USA. Use for General Purpose Application. Shank is Straight w/ Weldon Flat. 30 Day Warranty. - - -
**** PRICE: 127.90 USD
Manufacturer : GREENFIELD INDUSTRIES INC.
SKU: B2541352
UPC: 697334390213
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
5/64" Dia., 1/8" Shank, 0.625" LOC, 2-1/2" OAL, 3 Flute Carbide Ball Single End Mill, ALTIN
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 37.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247508
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
1/32" Dia., 0.046" LOC, 2-1/2" OAL, 0.470" LBS, 3 Flute Carbide Ball Single End Mill, Uncoated
Business & Industrial
Global Industrial
3 Flute Solid Carbide Micro Ball End Mills are ideal for profiling, slotting and plunging applications. They allow for high performance milling of small features and parts. The ball end tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. The extended neck style enables step down milling paths with higher feed rates. While Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 45.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2247516
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
20mm Dia., 20mm Shank, 38mm LOC, 100mm OAL, 4 Flute Solid Carbide Ball Single End Mill, AlTiN
Business & Industrial
Global Industrial
4 Flute Carbide Ball End mills excel in peripheral milling and finishing. 4 Flute end mills provide a much finer finish and can be ran at faster rates. The hemispherical tip produces rounded details, where sharp corners must be avoided, and they are commonly used in dies and molds. Carbide's extreme hardness allows for the tool to be run much faster than HSS or cobalt. It provides a high degree of wear resistance by withstand high cutting temperatures. The rigidity of carbide allows for excellent surface finishes and dimensional accuracy - - -
**** PRICE: 219.95 USD
Manufacturer : MELIN TOOL COMPANY
SKU: B2243736
UPC:
Tags: | Global Industrial. Industry-leading products, knowledge and expertise. USA
↑ Start of page
Category Home ... ALL PRODUCTS >> : 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90 - 91 - 92 - 93 - 94 - 95 - 96 - 97 - 98 - 99 - 100 - 101 - 102 - 103 - 104 - 105 - 106 - 107 - 108 - 109 - 110 - 111 - 112 - 113 - 114 - 115 - 116 - 117 - 118 - 119 - 120 - 121 - 122 - 123 - 124 - 125 - 126 - 127 - 128 - 129 - 130 - 131 - 132 - 133 - 134 - 135 - 136 - 137 - 138 - 139 - 140 - 141 - 142 - 143 - 144 - 145 - 146 - 147 - 148 - 149 - 150 - 151 - 152 - 153 - 154 - 155 - 156 - 157 - 158 - 159 - 160 - 161 - 162 - 163 - 164 - 165 - 166 - 167 - 168 - 169 - 170 - 171 - 172 - 173 - 174 - 175 - 176 - 177 - 178 - 179 - 180 - 181 - 182 - 183 - 184 - 185 - 186 - 187 - 188 - 189 - 190 - 191 - 192 - 193 - 194 - 195 - 196 - 197 - 198 - 199 - 200 - 201 - 202 - 203 - 204 - 205 - 206 - 207 - 208 - 209 - 210 - 211 - 212 - 213 - 214 - 215 - 216 - 217 - 218 - 219 - 220 - 221 - 222 - 223 - 224 - 225 - 226 - 227 - 228 - 229 - 230 - 231 - 232 - 233 - 234 - 235 - 236 - 237 - 238 - 239 - 240 - 241 - 242 - 243 - 244 - 245 - 246 - 247 - 248 - 249 - 250 - 251 - 252 - 253 - 254 - 255 - 256 - 257 - 258 - 259 - 260 - 261 - 262 - 263 - 264 - 265 - 266 - 267 - 268 - 269 - 270 - 271 - 272 - 273 - 274 - 275 - 276 - 277 - 278 - 279 - 280 - 281 - 282 - 283 - 284 - 285 - 286 - 287 - 288 - 289 - 290 - 291 - 292 - 293 - 294 - 295 - 296 - 297 - 298 - 299 - 300 - 301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350 - 351 - 352 - 353 - 354 - 355 - 356 - 357 - 358 - 359 - 360 - 361 - 362 - 363 - 364 - 365 - 366 - 367 - 368 - 369 - 370 - 371 - 372 - 373 - 374 - 375 - 376 - 377 - 378 - 379 - 380 - 381 - 382 - 383 - 384 - 385 - 386 - 387 - 388 - 389 - 390 - 391 - 392 - 393 - 394 - 395 - 396 - 397 - 398 - 399 - 400 -
|
HOME : Shopping
